MacPro running Tiger 10.4.11 reboots every time after waking from sleep mode

Whenever I wake my MacPro from sleep it now reboots as though it was shut down completely. This worked fine last week and only started happening yesterday. Any advice appreciated. Thanks.

Try a PRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
Excerpt from: http://support.apple.com/kb/ht1379

Similar Messages

Anyone's MacPro have problems after waking from sleep mode?

After waking from sleep, my MacPro 2x2.4 Quadcore Intel Xeon freezes in several applications that had been running before sleeping. Mail and Firefox both get into endless loops trying to download data and will not force quit. Pulldown restart and shut down do not function when this is occurring. Must shuyt down manually from box and start again. Everything works fine again until it goes to sleep again.

Start by swapping the keyboard. You don't need to spend a fortune, and handy to have spare. USB cables can be bad even new.
When I had some problems Apple wanted to blame the mouse, keyboard, cable, but in the end I found
A. run Disk Warrior
B. Corrupt pref or conflict with version of Hardware Monitor and other background tasks

Lion reboots after waking from sleep mode

Since Lion I sometimes get the following issue: When waking my Macbook Pro (older Macbook Pro 15" 2.4 GHz Intel Core 2 Duo, 4 GB Ram, Mac OS 10.7.1) it will restart (like hard restart) all the programs that were running at the moment I put it to sleep before, just like after a restart of the Macbook Pro with the feature checked for reopening all currently opened windows again. Finder also restarts, the menu bar at the top for example will be gone for some seconds.
This is getting really annoying, because this of course takes way longer than a normal wake up and sometimes not all programs are restarted properly, causing further issues...
Only thing I noticed is, that this only seems to happen when the Macbook Pro had slept for a longer time, for example over night. Sleeping for only a few hours doesn't seem to make any problem.
Any help would really be appreciated!

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them. Disk Utility's Disk Repair is not perfect and may not find or repair all directory issues. A stronger utility may be required to finish the job.
After that Repair Permissions.
No need to report Permissions errors....we all get them.
 DALE

After upgrading to Tiger, freeze after waking from sleep on PM G4

My experience with Tiger in the past week as not been great. The reason I upgraded was to get iSync 2.1, so that my Moto E815 phone could be sync'd with my OSX AddresBook and iCal. This wasn't possible with the latest version of Panther.
So, I upgraded to Tiger 10.4.3, and now my G4 freezes immediately after waking from sleep. After pressing the 'return' key to wake the computer, the G4 sends a signal to wake the monitor, but on top of the screen saver is a black text box which states there was a problem I must press (and hold) the power button to restart the Mac. It's written in four languages.
When I installed Tiger, I used the 'archive' option.
My computer is a bit of a FrankenMac: Originally a G4/350 with AGP, upgraded with a Sonnet 1GHz G4 processor card, 1.12GB RAM, a 160GB HDD, an nVidia GeForce3 64MB AGP video card, Samsung DVD/CR-RW drive (Patchburn3) and a Belkin PCI card with 2 additional Firewire ports and 3 additional USB 2.0 ports. When I performed the upgrade, I had the keyboard and mouse plugged into the case USB 1.1 ports, a Logitech Notebook Pro USB camera plugged into the other case USB 1.1 port, and a D-Link BT120 USB->BT adapter plugged into one of the three USB 2.0 ports on the Belkin PCI card.
When I check the Console logs after the rebooting, I see a kernal panic in the panic.log. Apple has received this a number of times from me in the past week as I keep sending them 'talkback' logs after the fact.
I also see an error in the system.log which may reveal what is going on:
Nov 20 18:54:40 localhost kernel[0]: standard
timeslicing quantum is 10000 us
Nov 20 18:54:40 localhost mDNSResponder-107.3 (Aug 22
2005 11: 46:54)[44]: starting
Nov 20 18:54:40 localhost kernel[0]:
vmpagebootstrap: 284852 free pages
Nov 20 18:54:40 localhost kernel[0]:
migtable_maxdispl = 70
Nov 20 18:54:40 localhost kernel[0]: 71 prelinked
modules
Nov 20 18:54:40 localhost kernel[0]: Copyright (c)
1982, 1986, 1989, 1991, 1993
Nov 20 18:54:40 localhost kernel[0]: The Regents of
the University of California. All rights reserved.
Nov 20 18:54:40 localhost kernel[0]: using 2949 buffer
headers and 2949 cluster IO buffer headers
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270 Bus
9 already taken
Nov 20 18:54:40 localhost kernel[0]: USBF: 14.270
AppleUSBOHCI[0x2057000]::start OHCI controller will be
unloaded across sleep
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
TI ID 8019 built-in now active, GUID 000a27ff
feb38fe6; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: FireWire (OHCI)
VendorID 1033 ID cd PCI now active, GUID 0000303c
0008c32e; max speed s400.
Nov 20 18:54:40 localhost kernel[0]: Security auditing
service present
Nov 20 18:54:40 localhost kernel[0]: BSM auditing
present
Nov 20 18:54:40 localhost kernel[0]: disabled
Nov 20 18:54:40 localhost kernel[0]: rooting via
boot-uuid from /chosen:
474ACE52-2523-3EE7-9C54-DDC3734C7922
Nov 20 18:54:40 localhost kernel[0]: Waiting on <dict
ID="0"><key>IOProviderClass</key><string
ID="1">IOResources</string><key>IOResourceMatch</key><string
ID="2">boot-uuid-media</string></dict>
Nov 20 18:54:40 localhost kernel[0]: Got boot device =
IOService:/Core99PE/pci@f2000000/AppleMacRiscPCI/pci-bridge@D/IOPCI2PCIBridge/ma c-io@7/AppleKeyLargo/ata-4@1f000/KeyLargoATA/ATADeviceNub@0/IOATABlockStorageDri ver/IOATABlockStorageDevice/IOBlockStorageDriver/HDS722516VLAT80
Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
Nov 20 18:54:40 localhost kernel[0]: BSD root:
disk0s10, major 14, minor 10
Nov 20 18:54:40 localhost kernel[0]: jnl:
replay_journal: from: 2668032 to: 12288 (joffset
0xe04000)
Nov 20 18:54:40 localhost kernel[0]: Jettisoning
kernel linker.
Nov 20 18:54:40 localhost kernel[0]: Resetting
IOCatalogue.
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 2
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: Matching service
count = 4
Nov 20 18:54:40 localhost kernel[0]: NVDANV20HAL
loaded and registered.
Nov 20 18:54:40 localhost kernel[0]: CHUDProf.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: CHUDUtils.kext
version: 4001000
Nov 20 18:54:40 localhost kernel[0]: raw version:
Darwin Kernel Version 8.3.0: Mon Oct 3 20:04:04 PDT
2005; root:xnu-792.6.22.obj~2/RELEASE_PPC
Nov 20 18:54:40 localhost kernel[0]: IPv6 packet
filtering initialized, default to accept, logging
disabled
Nov 20 18:54:41 localhost kernel[0]: UniNEnet:
Ethernet address 00:0a:27:b3:8f:e6
Nov 20 18:54:41 localhost launchd: Server 292f in
bootstrap 1103 uid 0: "/usr/sbin/lookupd"[42]: exited
abnormally: Hangup
Nov 20 18:54:41 localhost lookupd[56]: lookupd
(version 365) starting - Sun Nov 20 18:54:41 2005
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk0s10 hfs
474ACE52-2523-3EE7-9C54-DDC3734C7922 Onyx
Nov 20 18:54:41 localhost kernel[0]: jnl:
replay_journal: from: 1374208 to: 1564160 (joffset
0x624000)
Nov 20 18:54:41 localhost diskarbitrationd[36]:
disk1s10 hfs
947C0EA5-F775-330F-82D9-D2F8B65F7357 Backup
/Volumes/Backup
Nov 20 18:54:43 localhost kernel[0]: NVDA,NVMac: vram
[98000000:08000000]
Nov 20 18:54:43 localhost
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow:
Login Window Application Started
Nov 20 18:54:43 localhost loginwindow[72]: Login
Window Started Security Agent
Nov 20 18:54:44 localhost mDNSResponder: Adding browse
domain local.
Nov 20 18:54:45 localhost kernel[0]:
UniNEnet::monitorLinkStatus - Link is up at 100 Mbps -
Full Duplex
Nov 20 18:54:45 Jason-Radtkes-Computer configd[34]:
setting hostname to "Jason-Radtkes-Computer.local"
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
executing
/System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-netw ork
Nov 20 18:54:47 Jason-Radtkes-Computer configd[34]:
posting notification
com.apple.system.config.network_change
Nov 20 18:54:47 Jason-Radtkes-Computer lookupd[82]:
lookupd (version 365) starting - Sun Nov 20 18:54:47
2005
Nov 20 18:54:49 Jason-Radtkes-Computer configd[34]:
target=enable-network: disabled
I suspect the problem where the USB devices are started, because I had that Bluetooth adapter plugged in at the time of the upgrade. I'm speaking of the lines in the log which start with 'USBF'. The keyboard and mouse are useless when the black screen shows up after waking from sleep.
I've tried some of the suggestions I've found for the iBook 'wake from sleep' postings on macfixit.com and here - resetting NVRAM and removing a few of the .plist files. This didn't seem to help.
I would greatly appreciate help in resolving this issue. I've been a Mac owner since the original Macintosh (it's still in my house) and am frustrated that this is the first problem I've encountered.
Thanks in advance for your help.

Thanks. In fact I had bought a new keyboard and mouse (Macally) and sure enough, if I unplug it before it reboots, the CD drive door stays closed and I can boot from a CD! I did not try any of the other stuff. Is there any way to get it to stop this? Why does a USB peripheral cause the CD to eject anyway? Would love to know!
Ron

AFTER upgrading to OSX Mavericks 10.9.4, my mbp retina STILL lose wi-fi every time it wakes from sleep.

AFTER upgrading to OSX Mavericks 10.9.4, my mbp retina STILL lose wi-fi every time it wakes from sleep IF IT HAS BEEN SLEEPING FOR SOME TIME.

10.9.4 Combo Update
Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

MacPro slow after waking from sleep

I don't know if this has been asked before, but my MacPro (2 GHz, 2 GB RAM-BTO) gets very sluggish after awakening from sleep. After a restart, everything is pretty good and normal. Any ideas what is going on?
I do have spotlight on and everything checked. I'm not sure how to see if it is indexing during those times.
I used to think it was related to my EyeTV 200, but I've switched it to my Mac Mini and I still get the same problem.
Thanks for any ideas/help.

Many third party devices are not familiar with the low power mode coming out of sleep. Some have even had their Macs not wake up coming out of sleep when certain third party devices are hooked up. I'd check this with just an Apple keyboard and mouse to make sure it isn't a preference file that is corrupt.

Since upgrading to OSX Mavericks, my mbp retina will lose wi-fi every time it wakes from sleep.

When waking from sleep, my default home connection is lost, and it usually cannot re-connect until I turn off and back on wi-fi.

Hi. I'm experiencing the same problem, but it's on a 2007 iMac.
When it wakes from sleep, it does not connect to the preferred network. The preferred network is visible, yet when we select it, it asks for the password again -- which I know it is entered correctly -- but the password is refused. A full reboot is required for it to work properly.
It's an iMac, mid 2007, connecting to a Time Machine, using WPA/WPA2 security. All other devices (eg, iPad, iPhone and an other iMac) do not have this issue.
Workaround: I don't let that iMac go to sleep.
Speculation: It's as if when it wakes from sleep it thinks it a different type of security setting
I have not yet found a proper/permanent solution.
Note: I do have TrendMicro Internet security installed, but it is also on the the other iMac and I have tried it with it off and the problem still occurs, thus I doubt it has much to do with it.
Puzzled,
Mike.

My iPad loses it's ability to connect to the internet after awaking from sleep mode. Needs to be rebooted to reconnect.

My iPad loses it's ability to reconnect to the wifi after sleep mode often times, but not always. It is very annoying because it requires a reboot to reconnect. It is running the latest iOS software update. I have also reset network settings to the factory defaults. My wifi is working fine, and all other devices in my house have no issues at all.

Well, I think I have finally come up with a solution. It seems this issue happens when it auto locks. I turned auto lock to "never" in settings, and the issue has not happened since. Seems there may be a bug in this feature???
I now use manual lock, and upon awakening the wifi is now fully working.

Wifi won't connect to WPA2 network after waking from sleep, requires reboot

My office has a WPA2 network that I use my MBP to connect to. When I go home for the day, I close the MBP and put it to sleep. When I get home and open it, it automatically connects to my home wifi network. I do the same coming back to work and when it wakes up it shows a connection to the wifi network, but whenever I initially do any network task, the connection drops and I am unable to connect until I reboot my mac.
I've tried turning off the wifi before sleeping, then turning it back on, but it does the same thing.
Any ideas?

Hi,
I'm thinking about a trouble with the route table. Try this in a terminal session after startup:
netstart -rn
ping <network address>
After somes answer, close the cover to go to sleep mode.
Open the cover and look the result of the ping command
Normaly you don't have a network
cancel the ping command and redo the netstat commande
Normaly some rows are missing in the result (i don' know why)

Mac Pro restart every time it wakes from sleep

I wonder if anyone has this problem, it is not a big one but annoying. Every time I wake my Mac Pro from sleep it restarts, why is that and can it be fixed? Or there is something wrong with this model?
Model info:
Model Name: Mac Pro
Model Identifier: MacPro3,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.8 GHz
Number Of Processors: 2
Total Number Of Cores: 8
L2 Cache (per processor): 12 MB
Memory: 2 GB
Bus Speed: 1.6 GHz

It is big if the hard drive directory is corrupt in the process.
It was common when 2008 first came out, there is/was a firmware update to address this - and a long thread from March era 2008.
Underpowered UPS can also cause this behavior.

Why do hot corners break every time I wake from sleep?

Every time I open my computers, my set hot corners have stopped working. In the settings, they are still there, but I have to either change the settings and change them back, or use the terminal command 'killall Dock' to fix the issue. It's quite annoying to have to do this every single time I turn on my computer. Does anyone know a fix?

I have this same issue - after coming back from sleep hot corners stop working - this is a constant problem and I think having to type "killall Dock" is NOT a solution. I also have a rMBP with 10.8.2

"Connection lost" every time I wake from sleep

I bought my MBP with the wireless mighty mouse and for the past 2 or so months I've had no complaints about the bluetooth connection.
Now, every time I wake my computer from sleep the square comes up saying "Connection Lost" at the bottom center of my screen then about 5 seconds after my mouse pairs again.
Why's it doing this? Never did before...
I' not too sure if I'm being to nit-picking or a perfectionist but it just didn't do it before.
Am I crazy or does everyone's do this?
Thanks
-Mike

Hi MIke:
I do not have a similar configuration (I rarely turn mu desktop iMacs off). When I do shut them down, the wireless devices are connected automatically.
However, if your mouse does pair, I would try "normal" troubleshooting as that could possibly cause additional problems.
Barry
P.S. I am also curios about anomalies myself!

If i close firefox and try to reopen it tells me its alreasdy running and I have to reboot every time??? WHY IS THIS Please

if I close FireFox and then try to open it again I get a message saying its all ready running and i must close current session and start again or reboot and I always have to reboot ?? Most frustating is there a reason for this I can change settings for

Hi Andis.
First of all, this is completely normal behavior, although it's a bit irritating, I know. What happens is that when you close Firefox, despite the window disappearing right there and then, Firefox keeps running for a little bit until the whole closing procedure is completed. This can take a fraction of a second on fast computers, or can take a few seconds on slow computers or when Firefox is storing a large session (if you save your tabs). All you have to do is wait a bit until Firefox closes, and then open it again.
To see if it's still running, you can press CTRL+SHIFT+ESC and then, under the Processes tab, you can see if firefox.exe is still there. If it's taking an unusual amount of time to close (which happens very rarely, and only if the browser freezes on exit), you can force the application to terminate from this application (task manager).
Firefox 4.0 will reduce by 97% the time it takes firefox.exe to close, so this problem will be basically erased for Firefox's next version.
Until then, I can recommend you this extension, which helps you restart your browser more easily and without bothering about closing times:
https://addons.mozilla.org/en-US/firefox/addon/3559/
Hopefully this will help.

Time Machine crashes every time after the computer sleeps or goes into screen saver for a period of time

Time Machine works for me about 90% of the time, until I leave the computer alone for over a hour it seems and gets into the late screen saver stage or goes to sleep. After it does this Time Machine will not work, yet the hard drive is still fully fuctional. Please Advise.

Time Machine works for me about 90% of the time, until I leave the computer alone for over a hour it seems and gets into the late screen saver stage or goes to sleep. After it does this Time Machine will not work, yet the hard drive is still fully fuctional. Please Advise.

Wifi disconnects when waking from sleep mode; running Mountain Lion

Had this same issue with Lion as well,, wifi disconnects when waking from sleep mode,,,any ideas how to fix this pesky issue?

Hi Sky,
This has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

MacPro running Tiger 10.4.11 reboots every time after waking from sleep mode

Similar Messages

Maybe you are looking for