Macpro sled not going in

I just swapped out a hard drive in my 2008 MacPro and now I can't get the sled to go in all the way. It doesn't appear there is anything blocking it. Anyone have ideas or thoughts on this? Thanks.

How far does it go in? If it's all but the last ~1/4 inch (~0.5 cm) then the connectors may not be lining up. Do the connectors on the drive and in the Mac appear to be in good condition? Have you tried other bays? You did swap it with a SATA drive and not an IDE/PATA drive? Do the screws on the drive sled stick up above the sled?

Similar Messages

Macpro will not go to sleep, just by relocation macpro?

I have a 12core 5,1macpro with mavericks.
Sleep always worked fine untill I moved my macpro to another location in my house.
All connections are the same, no new deviced.
The macpro will not go into sleepmode, the screen goes dark but the computer is still awake.
I tried SMC and Pram, both did nothing. I typed 'wake reason' in console with zero hits.
Any ideas?

I did a 'pmset -g log' in terminal.
Time stamp                Domain                        Message                                                                               Duration            Delay
==========                ======                        =======                                                                               ========            =====
UUID: CEB12517-DC2B-48D7-8D37-2FC82FDD1DEA
27/03/14 23:56:27 GMT+1 Wake                          DarkWake to FullWake [CDNVA] due to HID Activity: Using AC
27/03/14 23:56:27 GMT+1 Timedout                      Kernel: Response from Messages timed out (powercaps:0x9)                                       30000 ms
27/03/14 23:56:27 GMT+1 Timedout                      Kernel: Response from Core Sync timed out (powercaps:0x9)                                      30000 ms
27/03/14 23:56:27 GMT+1 Timedout                      Kernel: Response from System Preferenc timed out (powercaps:0x9)                               30000 ms
27/03/14 23:57:33 GMT+1 Assertions                    PID 21(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xe00000231 [System: PrevIdle SRPrevSleep kCPU]
27/03/14 23:57:48 GMT+1 Assertions                    PID 21(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000231 [System: PrevIdle SRPrevSleep kCPU]
27/03/14 23:57:48 GMT+1 Assertions                    PID 21(powerd) Released InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000231 [System: PrevIdle SRPrevSleep kCPU]
28/03/14 00:03:09 GMT+1 Assertions                    PID 443(CINEMA 4D) Released PreventUserIdleSystemSleep "Stay compatible" 00:11:05 id:0x1000001e5 [System: No Assertions]
28/03/14 00:03:15 GMT+1 Assertions                    PID 21(powerd) Created InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:00 id:0xe00000251 [System: SRPrevSleep kCPU]
28/03/14 00:03:30 GMT+1 Assertions                    PID 21(powerd) TimedOut InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000251 [System: SRPrevSleep kCPU]
28/03/14 00:03:30 GMT+1 Assertions                    PID 21(powerd) Released InternalPreventSleep "com.apple.powermanagement.darkwakelinger" 00:00:15 id:0xe00000251 [System: SRPrevSleep kCPU]
Sleep/Wakes since boot at 27/03/14 23:40:40 GMT+1    Dark Wake Count in this sleep cycle:0
Time stamp                Domain                        Message                                                                               Duration            Delay
==========                ======                        =======                                                                               ========            =====
UUID: 7DB33481-AA98-4C8A-B92B-A23ED42C6672
28/03/14 00:03:35 GMT+1 Wake                          DarkWake to FullWake [CDNVA] due to HID Activity: Using AC
28/03/14 00:03:35 GMT+1 SlowResponse                  Kernel: Response from Core Sync is slow (powercaps:0x9)                                        4974 ms
28/03/14 00:03:41 GMT+1 Showing all currently held IOKit power assertions
Assertion status system-wide:
   BackgroundTask                 0
   PreventDiskIdle                0
   ApplePushServiceTask           0
   UserIsActive                   0
   PreventUserIdleDisplaySleep    0
   InteractivePushServiceTask     0
   PreventSystemSleep             0
   ExternalMedia                  0
   PreventUserIdleSystemSleep     0
   NetworkClientActive            0
Kernel Assertions: 0x10c=USB,BT-HID,MAGICWAKE
   id=501 level=255 0x4=USB mod=27/03/14 23:48 description=EHC1 owner=AppleUSBEHCI
   id=502 level=255 0x4=USB mod=27/03/14 23:51 description=UHC6 owner=AppleUSBUHCI
   id=504 level=255 0x4=USB mod=27/03/14 23:51 description=UHC4 owner=AppleUSBUHCI
   id=508 level=255 0x100=MAGICWAKE mod=01/01/70 01:00 description=en1 owner=en1
   id=509 level=255 0x8=BT-HID mod=01/01/70 01:00 description=com.apple.driver.IOBluetoothHIDDriver owner=BNBMouseDevice

Payment Term from Vendor is not going to Freight PO

Hello All,
I am not MM consulting but I need to solve a problem.
As we know when I save a shipment cost document SAP creates a automatically PO for carrier as the configuration.
I have the payment terms registered in the Vendor Master (Carrier) but when I save my ship cost document and the system creates the PO the payment terms it is not appearing in the PO and consequently is not going to MIRO.
How should I do to take the Vendor Payment Term to the Freight PO?
Thanks
Marcos

Hi,
   Ensure that the payment terms is maintained in the purchasing view in MK02 for the same purchasing organization.
   If its maintained, the same will be displayed in the automatic PO as well. If its not copied, please create a normal PO in ME21N and check whether the payment term is displayed in header - Delivery / Invoice tab.
   If you are in old release, refer the note: 358506 - Auto Service PO Creation - Passing Values into the Function
   If you are using TM system, refer the note: 1897588 - Payment terms not copied from Vendor master to PO
    If the notes are not valid, then you may check for OSS notes or raise an OSS ticket to SAP.
Regards,
AKPT

Videos Not Going On Macbook Pro

I got a macbook pro in March before I left for vacation. I've been working on putting pictures and videos from a hard drive(I think lol) on to the macbook pro, but the problem is the videos won't go. Pictures go fine. is there a way to get videos to go on it. videos from ipod touch, and iphone go on fine. just on the hard drive not going on. Not a big deal, just hoping to get some of my videos on it for a project. If I can't I'll just use pictures and make a slideshow that way and use my other program on regular computer for videos

I just purchased a 13" Mid 2012 MB Pro, first time on YouTube, the videos would not play, google "Adobe Flash", download and install the player and you should be good.

My iTunes says I owe $5.25 for songs that I have already paid for and am not going to pay for again but I want to get some apps from the store and now there's a hold on my account. Who do I talk to get the hold taken off

I explained it most in my question but I am getting charged double for songs that I have already paid for and am not going to pay for twice because that is messed up. But I want to get some apps from the store and it wont let me because of $5.25. Who can I talk to about resolving this issue?

You're right, it would have been covered under warranty. But because of the user damage, chances are there's a 200-something dollar fee . If you explain to them that it had a defect previously, they might replace it for you at no charge. **MIGHT**. But they would have to believe that it had a defect previously.

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

How can I delete the billing info on my phone? My card is expired and I'm not going to use another one

Tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account - that should give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918
You might not get the 'none' option if you owe iTunes anything or if you have any pre-orders/subscriptions due : http://support.apple.com/kb/TS5366

How can i reset my app store setting? i have signed in and out with my own apple id but i used a different one at first and that one is not going away

How can i reset my app store setting?
I have signed in and out with my own apple id but i used a different one at first a few years ago and that one is not going away how do i change it to my own apple id?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID. Your only option is to delete the content and buy it again with the new Apple ID.

Workitem not going to a particular user id

Hi,
I am having a workflow container element APPROVERLIST which stores the ids of the users to whom a particular workitem should go. But for a particular user id , the workitem is not going to that person, rather it is going to some other user ids. I checked if that id has been substituted but that is not the case.
Are there some other areas where I can check exception?
thanks in advance.
Abhishek

Dear all,
I have checked all the above scenarios.
There is no excluded agent existing . The bindings are correct. Let me describe the scenario little bit more in detail.
APPROVERLIST is a workflow container element ( multiline ). This container element is populated in a particular task. This task fetches the user ids from a table and stores it here.
In the next task which is a foreground task, in the "agents" APPROVERLIST is mentioned against EXPRESSION , so this workitem will go to all the users who are in APPROVERLIST.
Agent assignment is maintained correctly. Its not working for one particular id. Is there any place to check this outside the workflow design?
Also I checked the user id, it is existing.
regards,
Abhishek

WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or are they NOT GOING TO?!

Hi everyone, I am trying to find out WHEN Illustrator is likely to be adding "rotate view" tool, (like they have in Photoshop) or if they are not going to do this at all.
I hope someone from Adobe Illustrator reads these forums and responds. There is an existing thread that has no official response from Adobe, and it has literally tens of thousands of views!? Please Adobe Illustrator, can you give people the official response they need so they can plan their workflow.
Apparently Affinity Designer is going to be adding a Rotate View Tool shortly and their app is only $50 one-off payment too, so perhaps you ought to respond before other people start making the switch? The rotate view tool is something illustrators really need, we already have it in Manga Studio, and it makes life so much easier. You can't really draw on a CINTIQ in vector form without it, at least not as well as you should be able to.
Can you please update your paying customers so we can make an informed decision.
Look forward to receiving a response.

Tell Apple
Apple - iTunes - Feedback

Emails from the organization are not going through ePrint

Hi,
I've been having some issues with the ePrint feature that's configured in one of the printers that we have in our office. The printer is a HP LaserJet 200 color MFP M276nw. Every other client from other email addresses such as Hotmail, Gmail or any other address are able to send emails to our ePrint address and are able to print on it successfully. However, all the emails that are being sent from within our organization are not going through. We get an unsuccesful delivery message from the Exchange server stating that
The server has tried to deliver this message, without success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk
We had checked with our Exchange administrators and they have advised that the email is trying to be sent, but in the destination it is being rejected. How can I get this issue to be addressed?

Hello praveen_haridas,
Welcome to the HP Support forums. I understand that your corporate emails are failing when trying to send an email to the Laserjet 200 MFP 276nw printer's ePrint email address.
Are you getting any messages about the failed messages in your ePrintCenter/HP Connected account? If so what does the message state about the failed job?
Thank you.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP Officejet 6700 Fax not going through

When I try to send a fax, it dials but never connects?

Hi @Carlita61,
Welcome to the HP Forums!
I noticed that the fax is not going through with your HP Officejet 6700. I am happy to look into this for you!
What type of phone service do you have? Analog or digital? Analog. Digital. What’s the Difference?
If the phone service is analog, please see this guide, Cannot Send or Receive Faxes.
If the phone service is digital, please go to this guide, How to connect your HP Fax Device to an ISDN, ADSL, PBX, or VoIP line. Note: HP fax devices are designed to work with traditional analog phone services. They are not designed to work with digital phone services such as ADSL, PBX, ISDN, or VoIP. While HP fax products are not supported on these types of lines, they might work given appropriate setup and equipment.
To find out if your phone service is analog or digital please contact your phone provider.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again

My App Store is not working.a bingo blitz bar is being displayed and not going away.what is to be done to make App Store work again.

Hey Charyasmin,
Thanks for the question, and great troubleshooting so far. You’ve definitely taken the proper first steps. To continue to troubleshoot, the following articles may help:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

Why when I am downloading music off iTunes it's not going on my music? It says it is downloading and that its done then I go into my music and nothing is there

Why when I am downloading music off iTunes it's not going on my music? It says it is downloading and that its done then I go into my music and nothing is there

Did you go to purchased in itunes check if you have bought it.

Service Account details are not going through header(OSB Business service)

Hi
I have an issue with service account. Assume I have a proxy service A, Business Service B, Proxy service C.
A invokes B and B invokes C (A --> B --> C). All calls are through http protocol.
I created a service account with userid and password details and attached it to the Business service B(Static for basic authentication).
Added log activity in proxy service C for context variable $header to verify whether userid and password are coming through request header or not.
I executed proxy service A from sbconsole but I couldn't see userid and password details of created service account in the logs. Only nemespace are logged in the file.
<soap:Header xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"></soap:Header>>
Can someone please help me why service account details are not going through business service request. Am I missing any steps?
Thanks in advance
KK
Edited by: 966531 on Oct 23, 2012 4:23 AM

Basic authentication information is stored under transport headers (check $inbound) whereas $header is populated for message headers (for e.g. - SOAP headers), so you should be checking $inbound instead of $header
Regards,
Anuj

Hellow my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry

hellow
my i pod is not working.actually bettry was too low then i puted on charging.it starting charging but not going to power on.when it tried to starting on sunndly after the apple logo it showd the 5 % bettry and went back off and this proses is carry on.plz help me how it witt work starting.i urgently need to on my i pod.plz help me plzzzzzzzzzzzzzzzz

Hi there shehla sattar,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPad: Basic troubleshooting
http://support.apple.com/kb/ts3274
-Griff W.

Macpro sled not going in

Similar Messages

Maybe you are looking for