MacPro v1.1 Ethernet not working nor is it visible in network prefs pane

Hi,
I'm having trouble with my MacPro. I've been using the wireless connection and all is fine, however I decided to speed up the transfer of files between it and my Macbook Pro by connecting together with an ethernet cable. It doesn't seem to work. This is the first time I've tried to use the ethernet...
*There is no ethernet connection visible in the network preferences pane, only airport and firewire. Normal?.*
*How can I get the ethernet connection recognised and working?*
I've checked the ethernet cable with the laptop, connecting to a router and I can use the internet etc.
System Profiler recognises a ethernet card.
Thanks for any help you offer,
Al

OMG, guys I feel so dumb the new update to Tiger changed the way network pane worked so that was the whole problem its normal under 10.4.5 so plugged in a good cable and it came up fine go figure right. For being Apple certified for repair I sure looked past such an easy solution.

Similar Messages

Ethernet not working on brand new portable

Ethernet not working. This is a new portable.
Troubleshooting message: The realtek PCIe GBE family controller adapter is experiencing driver or hardware related problems.
Reinstalled the driver multiple times .
Reinstalled the portable to factory default.
Only one ethernet controller driver available for this portable on the HP site so i used that one.

Hi:
The only suggestion I can offer would be to try the driver directly from Realtek. Fourth file on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
If that fails to do the job, I recommend you either return the PC if you can, or contact HP technical support and submit a support case under the warranty.

Thunderbolt ethernet not working when computer wake up from sleep.

thunderbolt ethernet not working when computer wake up from sleep.
it will not happen in Mountain loin.

I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
In this case the problem was related to mDNSResponder task which handles all dns queries.
It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
QUESTION: Is your problem independent of the access point / router you connect to.
I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
Software is of poor quality. Not much more to say in this matter.
I found a very interesting article dated 1996 about programming which I think is still valid.
Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
Below the fragment (with some connection to Apple)
Software is everything. It also s***s.
"It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

New Problem, Old Issue. Ethernet not Working

You may recall this thread: http://forums.verizon.com/t5/FiOS-Internet/FIOS-Ethernet-not-working-Wireless-works-fine/td-p/203838
If you do, well, I have the same issue once more. It's driving me a bit nuts, to be perfectly honest.
About 10 days ago I finally had a stable ethernet connection on my Desktop machine to the internet. 8 days ago I marked the other thread as solved as it was still working and thought that my problems had been solved. Unfortunately, here I am 10 days later and suddenly, without warning, the ethernet connection on my Desktop loses internet connectivity.
I tried turning the router off and then turning it back on, but none of that worked.
Right now it switches between two different states without little indication as to why it switches between them except that it tends to only do it as a I unplug the cable and then plug it back in. The two states are simply connecting to an "Unidentified Network" which is much the same as the problem I had before, and connecting to an "Unidentified Network" with "Internet Access", except, none of the applications that use internet on the computer actually have Internet access even in this state. The Unidentified Network is the key to knowing I still don't truly have internet access.
Windows Firewall is off. It's actually been off for awhile now because I forgot to turn it back on after I initially shut it off trying to get it to connect before. Windows 7 (64-bit) is up-to-date, so that's not the issue either. But something is at issue here and I'm not sure what it is. Since the Wireless works, and the Desktop downstairs works on the ethernet, I can only assume it's something with this Desktop. But I'm not sure what it is or why it's doing this.
Any help with isolating the problem so I can actually fix it and not wait almost two weeks for it to magically work again would be immensely appreciated. Thank you.

Hello there Viafax and Spacedebris!
Apologies for not responding sooner. I decided to take a look at a Windows 7 support forum to see if the issue was something specific to that. After explaining in detail, I got this post and I followed the steps. I posted the information I got and then tried the duplex thing.
The default setting it seems is "Auto Negotiation" which obviously wasnt working.
I tried 100 Mbps Half Duplex and suddenly I had a connection. I can connect to the internet on my Desktop! So I tried 100 Mbps Full Duplex and.... no connection.
So, right now it's set to Half Duplex. But I don't even understand why it would need to be Half instead of Full, or the benefits or disadvantages to either. Right now it's working, but I wish I understood more.
The 192.168.1.25 may have been a typo, since I set the device to run off a static IP of 192.168.1.125, to my knowledge no device on the network has 192.168.1.25
But other than that brief typo, I do believe the rest of the information is as accurate as I could make it. I typed it as I looked for it, so even if it seems odd, that's what it was.

Ethernet not working with 10.10.1

Just upgraded to 10.10.1 with my iMac. The ethernet port is unavailable. Wireless works. Tried a PRAM reset and deleting the network configuration. Still Ethernet not working. Ideas?

I suggest you ask this in the Yosemite Forum

I have an iPhone 4s model MD241C. Siri not working, nor is it found anywhere in the settings, I have an iPhone 4s model MD241C. Siri not working, nor is it found anywhere in the settings

I have an iPhone 4s model MD241C. Siri not working, nor is it found anywhere in the settings

Check Settings -> General -> Restrictions and see if perhaps Siri is turned off there.
Regards.

Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?

Updated to IOS 7.1 and now my "Call Waiting" does not work, nor will the "Call Waiting" indicator stay on..... Any help?

Settings > General > Reset > Reset Network Settings

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server.

I can't set up gmail in my iPad 2. Keep on saying ' can't connect with SSL and ask me whether to connect without using SSL, then I press 'yes' and it said again IMAP is not working and tell me to see network connection and incoming mail server. No idea how to do anymore. Already tried to figure out. But not work. Can anyone pls help me?

Nope, doesn't pass verification. I get the spinner for a minute or so, then the alert about setting it up without SSL. Are you suggesting I disable Fetch and Push BEFORE I enter the account details? Because I never get past the account details screen, unless I choose "Set up without SSL" after the warning.

Built-In Ethernet Port Doesn't Show Up In The Network Preference Pane

My ethernet port no longer shows up in the Network preferences pane under Network Status. The status Airport and the Internal Modem are still displayed though. Plugging in an ethernet cable causes my machine to crash; sometimes I get a message that I need to hold down the power button to reboot, and other times command line-like text is displayed on top of whatever was on screen.
The only change I've made to my system since last using a wired connection was installing Security Update 2006-001 on March 1st and OS X Update 10.4.5 on February 14th. After running the 10.4.5 updater, my machine initially refused to reboot. On the first attempt, it played the start up chime, but the screen remained black. The second time, the Apple logo appeared, but the spinning pinwheel never did. The third attempt was successful and my system appeared to be functioning normally.
How do I get my ethernet port to work again?

Does "Built-in Ethernet" show up as a choice in the 'Show:" popup? If so, is it configured as you would expect? For instance, if "TCP/IP" is set to use DHCP, do you have an IP address, subnet mask, etc.? There is an "off" setting for TCP/IP; make sure that hasn't been selected somehow.
There is also an "Assist Me" button that will let you launch the diagnostics app. Does this also crash the Mac? If not, what are the results of its tests?
Also, you may want to do a permissions repair with Disk Utility if you haven't done this since applying the updates.
If you still get crashes, there may be a conflict with a log-in item, particularly if you have any third party ones. (Check that in the "Accounts" pref.) One way to diagnose things like that is by creating a new test account & logging into it. If the problems go away, you can assume a user cache, .plist, or login item is the problem.
If none of this turns up anything, you may need to reinstall the OS. Short of that, you can try downloading the 10.4.5 combo update & running it. It replaces more components than the "delta" update so it just might do the trick. Besides, if you end up having to reinstall the OS, having the combo version handy will save you the time of downloading & installing any incremental updates to get back to 10.4.5.
As always, backup all important files before applying any updates.
Good luck!

I have a 2013 macpro I upgraded to yosemite. Now I find time machine does not work, nor my old back up using a click free wireless back up. What is the status of time machine and yosemite?

What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Thunderbolt ethernet not working after upgrading to Yosemite

After a very long and frustrating 2 days I have managed to upgrade my MacBook Air (13 Inch, Early 2014) to Yosemite. I have the official Apple thunderbolt to ethernet adapter but System Preferences/Network reports that the cable has been disconnected. It has not and other devices connected to the ethernet cable work fine. Any suggestions to get it working? Anyone else having the same problem?

I have a similar problem. My Macbook Pro Retina 15" (1st generation) can no longer connect to my university network through a Thunderbolt-to-Ethernet adapter since upgrading to Yosemite. (Actually, OSX 10.9 on a different machine altogether also has the same problem -- tested and verified.) I tried multiple dongles and multiple Ethernet cables, and finally called our tech support. We found a workaround for the problem by purchasing a USB to Ethernet adapter, but this now means that instead of a single device chain leading into the laptop, I am now using multiple ports. I hope a patch for this is in the works.

Thunderbolt Ethernet not working after Yosemite upgrade

Upgraded last night to 10.10, and now my Thunderbolt Ethernet adapter has no MAC address, and my MBP appears to think the cable is unplugged - it's not, and worked fine when the MBP was running 10.9 yesterday. Things which haven't worked:
Deleting and re-adding via Network Preferences
Changing default IPv6 to Link-local only
Rebooting with the thunderbolt adapter in
Rebooting with the thunderbolt adapter not in
Switching the thunderbolt adapter to the port further from the hinge and back again
Unplugging and replugging the ethernet cable
Plugging the ethernet cable directly into the wall jack instead of the hub it has always been plugged into
Unplugging and replugging the Thunderbolt
Changing Location to "Work" from "Automatic" and back again

the link provide above leads to http://plugable.com/2014/10/31/os-x-10-10-yosemite-ethernet-adapter-problems-we- can-help
...but these seem to be all 3rd party USB ethernet adapters and nothing to do with the Thunderbolt adapter of the thread - or am I missing something?
I have the same blooming problem, it seems to be totally hit and miss whether the adapter works or not.
I thought is was a faulty adapter, so even bought a second one for my MacBook Pro, so a bit more profit for the most profitable company in the world for a non working device. My ethernet cable works fine to an old apple USB adapter but is 90% useless with Thunderbolt.
Renewing the DHCP lease occasionally works, but totally unreliable, at the moment it fails.
Still looking for a reliable solution.
Come on Apple, please sort this out, you have a connector policy of turning everything you can into adapters and dongles rather than building them in, so you end up with a slim laptop and a bag of adapters to carry around, and then when they don't even work - doubly annoying.

Some commands are not working nor in illustrator nor photoshop, any advice better than Adobe?

Illustrator is not fuctioning at 100%, some commands do not work ( eg - command open, nor place etc ) and same with photoshop....
Any advice

pcmyhre,
You may try the list, possibly starting with item 7) in 5), which is a list of the usual suspects, which may disturb and confuse Illy so she fails to do even simple things.
The following is a general list of things you may try when the issue is not in a specific file, and when it is not caused by issues with opening a file from external media, see below. You may have tried/done some of them already; 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save current artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to at least 5 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
External media: It is always recommended here to open/save from/to own hard disk, and to copy from/to networks and removable media. You may be lucky (for a while), but the chances of file corruption and other unpleasantnesses are immensely greater when you use anything but the harddisk, and it is better to be safe than sorry.
In addition to the (far greater) risk of file corruption, some issues are mentioned here:
http://helpx.adobe.com/illustrator/kb/illustrator-support-networks-removable-media.html

Usb 3 and ethernet not working

hi...
i bought a new pavilion model 500-400na with windows 8.1.. i format it and installed windows 7 64bit... now my usb 3.0 and etherent `drivers is not compatabile and they are not working..
please someone help me to solve this problem...
This question was solved.
View Solution.

Hi:
I can't get to the HP support page to find the drivers you need but if you install the AMD chipset driver from the link below and reboot, you will be able to get the USB ports to work.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...

Ethernet not working, strange problem

Hi Everyone,
I have a very strange problem. I haven't had internet at my new apartment all summer and have been using my schools internet to use the internet. I typically would go to the computer lab and use the ethernet cable to plug in and it worked fine. However the other day i went to a different room and connected there and that worked fine, but now if i go back to the computer lab it says my IP is being used by another device.
Stranger further, now that i got internet at my place my computer won't even read it, it says its connected but can't get online, while my suitemate has no problem what so ever. Any hints as to what might be going on?
The thing is if i go back to that classroom and plug in it works but anywhere else my ethernet connection does not work.
I have a MacBook Pro, bought last summer running Lion.
Jacob

I am having the same issue, Jacob. In late August, I was working on a wired network at a hotel during business travel. One day, I was fine. The next morning, I received the same information...that my IP address was being used by another computer. My business partner logged in to the network from his Linux machine without this issue, so it isn't the cable or the network itself.
I am now unable to login on any wired network. And it now appears I am unable to create an ethernet connection anymore.
Has anyone resolved this issue?

MacPro v1.1 Ethernet not working nor is it visible in network prefs pane

Similar Messages

Maybe you are looking for