MacPro(Late 2013) AMD FirePro D700がAfter Effects CC(12.2)でGPU認識されない

MacPro(Late 2013最新モデル）にてグラフィックスをMacPro(Late 2013AMD FirePro D700 6144 MB x2積んでいるのですが、
Adobe After Effects CC(12.2)にてレイトレースがGPU認識がされていません。
またCUDAもNVDIAドライバー、バージョン6.0.37（2014.5.1現在最新）をインストールしていますが、
GPU情報をみても、CUDAが認識がされていません。
MacPro(Late 2013最新モデルは、買ったまっさらな状態で、After Effects CCはインストールしました。
ちなみにPremiere CCはGPU認識されています。
下記にAfterEffects CCのGPU情報画面にてコピーしたものを貼付けます。
アドバイスいただけますと幸いです。よろしくお願いします。
高速ドラフト : 使用可能
テクスチャメモリ : 1535.00MB
レイトレース : CPU
(GPU を使用できません - 互換性のないデバイスまたは CUDA ドライバーです)
OpenGL
ベンダー : ATI Technologies Inc.
デバイス : AMD Radeon HD - FirePro D700 OpenGL Engine
バージョン : 2.1 ATI-1.20.11
合計メモリ : 2.00 GB
シェーダーモデル : -
CUDA
ドライバーのバージョン : -
デバイス : -
現在使用可能なメモリ : -
最大使用可能メモリ : -

こんばんは
レイトレース3DのGPU高速処理をしてくれるのは、NVIDIA製の対応GPUが搭載されていて、かつCUDAドライバをインストールされている場合ですね。
After Effects CS6「”After Effectsエラー：レイトレース3D：レイトレーサー用にページングされたマップメモリが不足しています」

Similar Messages

Premiere Pro, MacPro late 2013, AMD Fire Pro 500, editing timeline screen-freeze out.

Adobe Premiere Pro software and my new MacPro with AMD 500 FirePro will not play nice together. Just for the record, I recently purchased two MacPro Late 2013, 6-core, 16GB, AMD FirePro D500, running OS X 10.9.5 systems. We now edit in Premiere Pro through AdobeCloud and have been a buzz about it until we switched to the New MacPro.
Issue: The timeline in Premiere Pro keeps locking up, crashes, displays artifacts in the video and keeps stuttering on top of it in both Mercury PlayBack GPU (OpenCL) and Software modes (both act the same). Searching many posts and possible solutions online to this problem it seems this is a common issue that has yet to be fixed.
I have called both Adobe and AppleCare and both seem to be pointing the finger at each other without admitting any fault what-so-ever. Shame on both of you for ignoring your core base customer and providing a fix. After hours spent on the phone with both companies trying to just get help resolving this issue, with no resolution what-so-ever or any real work-around, it is my opinion that I have been conned.
I have no other conclusion to come to. I generally do not post, mainly because I do not have the time to do so. I prefer searching posts to find a solution or calling the Pro’s to get the answer if I can not find it or figure it out on my own. So sad to say I am now posting for the first time ever because I really do not know what else to do.
As a Director Producer and editor of over 80 stand-up comedy shows that have premiered on the Showtime Network (all edited in FCP 7 and recently in PremierePro over the past 8 years) and who has invested 1,000's if not hundreds of thousands of dollars in product and time into both Adobe and Apple over the past 10 years, I gotta say I am very disappointed in both Adobe, Apple and AMD for what seems to be an unwillingness to admit fault or even acknowledge that this malfunction exists.
Maybe this is just a good old fashion a con? Can't really decide which it is since I feel both conned, let down and deceived into purchasing the new MacPro and Adobe Premiere Pro products with the idea that it would not only make my life easier but would in fact save me money and time. None of which seem to be coming to fruition.
In-fact I have lost a week in time that I will never get back and actual work (files lost) trying to come up with my own solution or work around to what seems to be a design flaw. Not to mention the over 10k we have spent supposedly upgrading to the most advanced and best working machine and software in the industry… right! Is that why these products are called Pro? MacPro, Adobe Premiere Pro and AMD FirePro 500??? Really? This is so not Pro, this has in fact become counter-PRO-ductive.
With the advanced technologies of both these great companies these products are suppose to work as advertised and they do not. Shame on both of you for conning us who are loyal consumers into following you down this dark path while you fight it out and point the finger behind the vail at each other over what I am sure can be fixed, while we the consumer suffer your learning curve or unwillingness to admit fault.
There are thousands of Editors and producers who have been “con"-vinced through great marketing to upgrade to the MacPro trash-can (starting to see why its called that) while trying to adapt years of work through Premiere Pro to have it stop because these three "Pro Companies" can’t seem to get it together. GET IT TOGETHER!!! All of you and get this fixed.
Stop pointing the fingers at each other and get this fixed or years of good will be unraveled. Don't make us all go out and buy custom PC systems that might be faster and better working.
Steve Jobs would have never settled for this mediocrity and unwillingness to admit publicly that something is broken. He would have gotten it fixed and fixed quickly before it even got to this point. Please … Fix this so I can get back to what I do, working on delivering shows and stop forcing me to waste my time writing posts that undoubtably get lost on def ears!
— SM, Director, Producer, Editor and owner of LOL Comedy Inc.

The picture freeze comes randomly so there is no chance of seeing the usage in time and is only in Pr, not the MacPro at all. The time-line picture in Pr freezes and the sound continues to play out. Then when the timeline is stopped and we try and scrub to see movement, the sound scrubs normally but the picture does not. Eventually the clip in that section becomes either a freeze frame for the entire clip or it randomly turns green, sometimes not all green sometimes all green sometimes random lines of color artifacting. Then quitting out of the program is the only way out. Also at this point Pr does not quit completely, we have to do a force quit to shut it down. When it opens back up again the timeline is fine for another 20 minutes or so. Again longest run was about 2 hours before artifacting and freezing out. Also at any edit point, we then have to render to see it play smoothly, it works intermittently sometimes ok for a period of time after the render. Also if there is no render, then there is nothing but stuttering in that area of the timeline which i know is not suppose to happen.
FYI: below is the email I got back from the Support Associate I spoke with at Adobe just three days ago (October 3) who's thought was that it was a system wide problem with the OS X and that I should read his attached link (still no solution) which is also where I got some of my rhetoric about finger pointing and although I made it clear I was on 10.9.5 this link talks about problems with 10.9.3: of course, on the opposite side, the AppleCare supervisor I spoke to later in the day blamed it on Adobe Pr stating that no other program was experiencing these problems. Again no solution and more reason for frustration in my original post.
re: Maveric issues / Abhinav
Hi,
http://9to5mac.com/2014/05/21/os-x-10-9-3-breaking-mac-pro-graphics-card-compatibility-wit h-critical-pro-apps/
Thanks and regards
Ashish Paul
Support Associate

Dual AMD FirePro D700 Slots

I have a Mac Pro ( late 2013 ) with dual AMD FirePro D700's — My question is regarding the GPU's Slot-1 and Slot-2.
No matter which Thunderbolt 2 port I plug the Cinema Display Cable into it's always showing as Slot-2. Is this normal? The main reason I ask is that I would like to test both GPU's and I'm unsure how to configure the display to use Slot-1 to test the GPU to ensure it's properly working.

you want synthetic benchmarks? take a look and look up D700 and what Barefeats.com used and what apps or look around and Google for Mac Pro D700 GPU you will find some on various Mac forums like MacRumors and others.
Some apps do better than others, varies and drivers and OS version - some do "not so hot" too.

AMD Firepro D700 GPU Support?

I don't suppose there's a way for me to get AE to utilize my GPUs for Open-GL, is there? (AMD FirePro D700 (x2), 6144MB VRAM, PCIe Lane Width x16) I spent an awful lot of money on this machine and it seems odd that the most expensive graphic cards you can purchase with the new Mac Pro just aren't enough. Any idea if I'll ever be able to use these for Open-GL or should I just forget it exists?

The OpenGL features of After Effects should work fine on that GPU without you doing anything special. Are you finding otherwise?
Be sure that you understand what After Effects uses OpenGL for:
http://blogs.adobe.com/aftereffects/2012/05/gpu-cuda-opengl-features-in-after-effects-cs6. html

21/9eme Screen on MacPro Late 2013 ???

Bonjour
Juste pour savoir (Avant de commander car pas trouver d'information)
Est-il possible de connecter un écran 21/9eme sur un MacPro Late 2013 ??? resolution 2560X1080 (LG 25UM65)
et sur quel support HDMI, DislayPort ???
merci de vos reponce.
Translate G..gle
Hello there
Just to know (Before ordering because not find information)
Is it possible to connect a 21/9eme screen on a MacPro Late 2013?? resolution 2560X1080 (LG 25UM65)
and any HDMI DislayPort? holder?
thank you for your reponce.

HDMI works best at up to (but not exceeding) 1920 by1080.
The best way to connect displays to the Mac Pro 2013 is with (Computer-end) ThunderBolt/Mini_DisplayPort <---> DisplayPort (Display-end).
DVI-D
HDMI
DisplayPort
Headphone Out
Audio Inputs

Fix for blurry text on Dell 30" U3014 connected by DisplayPort to Mac Pro (late 2013) AMD D700

Just connected my new Mac Pro (late 2013) to my Dell 30" U3014 with DisplayPort cables, only to find blurry text and bad gamma etc.
Whilst the earlier post/discussion Mac Pro (8 core with the D700 GPU's) (Dell U2713H) was somewhat illumative, I thought a simple list of links for this specific configuration might help someone.
The Ruby script, modified for D3014 can be found at post http://embdev.net/topic/284710#3153072
If you're impatient like me, don't forget to copy the created Folder to /System/Library/Displays/Overrides before rebooting. Thanks to Blurry text on Dell Monitor + Mac OS X | Danilo Ercoli
Piers

Hi Grant,
Thanks for taking the time to think about my issue and respond. But I don't see where your response is relevant.
I want to connect two monitors, each via Mini-Display Port, and only one will work at a time. I am not using DVI cables at all. In this article, http://support.apple.com/kb/HT6068, it clearly states that I can connect three monitors via Thunderbolt (mini-display port) as long as they're on different busses. I was doing that, and it didn't work.
What display configurations can I use with my Mac Pro (Late 2013)?
You can connect up to six displays to your Mac Pro (Late 2013) running Windows 8 via Boot Camp. Check the list below to be sure you're setting up your displays in a supported configuration via the HDMI and Thunderbolt ports.
You can connect:
Six Apple LED Cinema Displays (27-inch) or third-party displays via Thunderbolt. For best results, attach displays to different Thunderbolt busses when possible (see figure below).
Three Apple Thunderbolt Displays (27-inch). Connect only one per Thunderbolt bus (see figure below). Note: You could connect three more LED Cinema Displays (27-inch) or third-party displays, one per Thunderbolt bus, for a total of six displays.
Two Apple Thunderbolt Displays (on Thunderbolt bus 1 and 2) and one 4K Ultra HD TV using HDMI.
Two 4K displays (on Thunderbolt buses 1 and 2) and one 4K Ultra HD TV on HDMI).

Macbook Pro 13 (late 2013) - external disks unmount after sleep

I've seen many other similar posts - just adding mine to the pile - wondering if anyone has seen a fix or has a recommendation
Macbook Pro 13 inch (late 2013) the Thunderbolt and firewire drives unmount when Macbook pro sleeps. (NOTE firewire drive connected via Thunderbolt display - but same happens with TB drives when connected direct to MBP)
Not a showstopper - but frustrating - fix would be nice.
Thanks
PS I had a Macbook Air 2011, with no "unmount" problem when i upgraded to Mavericks.
PPS - Really enjoyed moving from MBA to MBP 13 - superior build quality, keyboard much better and display.... amazing. Weight difference neglible.

Short update: After reading a while I tried several keyboard shortcuts during start up ... and I solved the issue:
Hold Command + Option + 'p' + 'r' during startup. This zaps the PRAM (Parameter RAM), an option that long-time Mac users will remember. Press and hold the key combination until you hear the second set of chimes. Zapping the PRAM returns it to its default configuration for display and video settings, time and date settings, speaker volume, and DVD region settings.
Thanks to all people who document such issues and its solution.

IMac (late 2013) periodically shuts down after updating to Yosemite

I have a 27 inch iMac (late 2013, have had it 6 mos.) which I updated to Yosemite and after the update, it has just shutdown 5 or 6 times, (panic reports say 5 times). The system also seems sluggish at times... It has worked like a charm until the upgrade. I'm trying to decide whether to reinstall Yosemite -which went smoothly- or to try to go back to Mavericks. I have the System Diagnostic Reports as well as the system diagnostic test, I just don't know how to interpret the results. Does anyone have the expertise to explain what is happening? (I'm not a novice, but haven't played with unix for 18 years!)
Thanks in advance,
Mark

I have a similar problem on my iMac 27-inch Mid 2011. No problems before upgrade yesterday to Yosemite. System settings show positive connection for wifi and ethernet. But web & mail access doesn't work for ethernet. Wifi access works only if I change service order with wifi listed before ethernet.
Apple phone support blamed it on my internet provider or router. However, our 2nd iMac (identical model) has web & mail access with ethernet. The other iMac is still running Mavericks. So the problem is clearly Yosemite.
I have put in a request for Apple support to call me tomorrow, & I'll see if they try the blame game again.

IMac late 2013 shuts down spontaneously after 2 hours, offers sign in screen

My recently purchased late 2013 iMac with Yosemite works very well but after a while, approximately 2 hours gives a message that it will shut down unless I stop it by canceling. I have not scheduled such shutdown.
I'd appreciate your advice.

IMac late 2013 lost usb connection after efi smc update

Hi
Lately i purchased a late 2013 iMac with i7 and fusion drive.
After i update to Mavericks and patched new efi and smc update,my mac start to lost usb connectiong when using, from keyboard mouse to my usb sound card, System is not freezing just the usb deviecs. have to press the power button to restart
already tried reset NVRAM and PRAM but doesnt work.

Exactely the Same issue with my iMac 27-fusionDrive3T late 2013, having USB HDs for time machine and data. I contacted the Apple support who propose first level of support: resets SMC, hard reset and so one without success . I did several trials removing hubs, using different USB (3.0,2.0 and 1.0) and changing devices connections(direct to iMac or through USB hub). I succeeded to find a stable configuration puting audio USB speaker directly connected to IMac. When I put this USB speaker through USB huband launch itune music after a certain time all USB chain freeze, and by consequence no more possibility to control the iMac with keyboard, trackpad .... IMac is still working,! The only possibility is to reboot the machine with tne reset button. Hope also this will fixe in the future OSX release!

Two DVI and one hdmi displays macPro late 2013 6core

Hi all,
if i connect 2 FullHD DVI monitors with passive thunderbolt2DVI adapters,
and an additional FullHD hdmi monitor with an active thunderbolt2dual-link-DVI adapter, would that work?
I can't find any information, if i've to use three active adapters.
Thanks in advance.
Jimmy

This says yes
Mac Pro (Late 2013): Using multiple displays
However, some users have posted that they lost their third monitor after the 10.9.3 update
https://discussions.apple.com/thread/6224241?tstart=0
My still works with 3 1080p or less montors
- One HDMI
- One mini display port to display port
- One mini display port to passive DVI adopter

MacBook Pro with Retina 13" Late 2013 thunderbolt port broken after 10.9.4 update

One of Thunderbolt Port (near USB port) was broken after 10.9.4 update.
I usually use mini Display Port to Display Port cable to connect my external screen, it works fine before 10.9.4 update. After 10.9.4 update, I tried to connect the external screen with the same cable, and the main screen of my MacBook Pro with Retina Display twinkling once so I'm sure the external screen was identified, but no video signal output.
I went to local Apple Premium Reseller (there is no Apple Store in Taiwan) and the they told me all of Thunderbolt Port was fine, they test with their own 10.9.2 copy and it seems ok. After that, I tried to re-install 10.9.4, downloading directly from Apple, the system re-install progress was complete but the Thunderbolt Port issue still there.
I connect to the broken Thunderbolt Port with Thunderbolt to Ethernet adapter, and it works fine, so I believe the only problem is that there is no video signal output from the Thunderbolt Port (near USB port one).
What should I do now?
Model: MacBook Pro with Retina 13" Late 2013

I can confirm that problem, too: Im' working with a Dell U2713HM display, connected via display port. Since 10.9.4 Update i'm experiencing random black screens and/or display going to energy saving mode. Today i've had this issue twice: Display going black and after disconnecting the macbook von all cables screen of the macbook remaining black. Holding Power Button for about 10 s restarts the macbook. After 5 minutes the same problem appeared again.

Can I connect two 4k TVs and one additional monitor via DVI to my MacPro (late 2013)?

Can I connect the following?
- 4k TV via HDMI
- 4k TV via Mini DisplayPort with an HDMI adapter
- DVI monitor with 2560x1440 resolution

I saw this page before but I am not 100 % sure if I interprete the statements correctly. For example, it is stated that "Two HDMI (HD or 4K) devices" are supported. When reading only this, it seems that the configuration in my question is not supported. However, they also wrote:
"Mac Pro supports a total of two DVI or HDMI displays when connected via the built-in HDMI port or using the Apple Mini DisplayPort to DVI adapter. To connect additional DVI displays, use an active DVI adapter such as the Apple Mini DisplayPort to Dual-Link DVI adapter. You can connect up to six active adapter DVI displays. This requires a powered USB hub since Mac Pro offers four USB ports and you will need six to connect them all."
Does this mean that I can also attach additional 4k HDMI TVs (and not just DVI displays)?

After Effects CC and new Mac Pro with FirePro D700

Hello
I'm about to purchase a new Mac Pro, 64GB RAM, SSD 512, Two AMD FirePro D700. Working with post-production software basically use Adobe After Effects CC, my doubt is whether the normal After Effects continue working on this new machine. If it is fully compatible with this video card and if all resources will have a better income. And what can you tell me about the Ray-Traced with these video cards.
Thank you.

• Adobe does not support AMD cards with their ray-trace renderer, and are unlikely to do so in the future.
• Cinema 4D Lite, included with AE CC, uses the CPU, not the GPU, for rendering.
• The third party plugin Video Copilot Element 3D is GPU dependent, and they have pledged support for the Mac Pro display cards.
• Adobe has hinted at substantial improvements to AE multi-threading efficiencies in a coming release. The implication is that more CPU cores will be better utilised in the future.
I will be buying a new Mac Pro soon too. What the above tells me is that After Effects will continue to be best served by faster and more multi-cored CPUs, rather than better GPUs. For my money, I will stick with the cheaper D500 GPUs, and get a better CPU option.

Any fix for CC render issue with the new MacPro Firepro D700. Getting lines and flicker as documented in threads

Hi,
We're facing some critical problems with our new MacPros, CC, and the Firepro D700's. It appears that after we upgraded to 10.9.3 the D700's no longer work with Creative Cloud. Our Premiere renders are full of artifacts, lines, and drop out. Same issue as documented in RENDER PROBLEM - AME and Premiere Pro CC causing random horizontal lines on H.264 Renders Can you advise as to when the fix will be pushed? We have turned to "software only" render, which is killing us for time. We have a huge amount of work that goes through 4 edit bays and its putting us days behind.
Please let us know,
Sincerely, Jim Janicek
Janicek Media, Inc.
720-891-6276
[email protected]

You need to ask in Community: Premiere Pro | Adobe Community but do not expect Adobe to discuss future plans
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform for bug reports or feature requests
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll
Also, this is an OPEN forum, not Adobe support... please do not post personal information

MacPro(Late 2013) AMD FirePro D700がAfter Effects CC(12.2)でGPU認識されない

Similar Messages

Maybe you are looking for