Macro to Unlock the Cell on the start day of the Fiscal period

Dear Experts
We are using  fiscal periods for the forecasting.1 period = 15 days.We forecast for 24 fiscal periods.
We only give chance to some customers to update forecast on  1 day of the fiscal period in the customer planning book .In this regard we have to lock the cell all most all the days except on 1 st day of the fiscal period.If the first of the Fiscal period is Sunday or Saturday, system should not unlock.
We did not maintained any Time stream ID to the storage bucket profile.
Example:
KF1 is used by our customers to update forecast.This keyfigure should always in the unedit mode.On the first day of the Fiscal period system should unlock the keyfigure.If first day of the period is saturday or sunday then system should not unlock this keyfigure.
Can we use calender in Macro?
Is it possible to achieve above logic in our case since we did not maintained time stream ID in storage bucket profile.
Please give your expertise opinion on my requirment.
regards
Vicky

Hi Vicky,
Whilst other simpler  options are given by others for locking /unlocking a KF with macros, Work around as below,  if feasible in your environment.
Create two planning books (or with authorization at data view level, 2 data views).
One planning book PB1 with the KF1 in  non-edit mode. This will be used normally.
Other planning book PB2 with KF1 in edit mode.
Create one more authorization profile/ role   for each customer user.
Assign this additional authorization profile/ role only on specific dates as per background job to give additional authorizations.
Otherwise, if  no. of user licenses is not an issue, then create an additional user id for each of the customer with additional authorizations and unlock these additional user accounts only on specific dates by background jobs.
We had in one project, some additional user accounts for similar( not exactly same) requirement. This gave better traceability.
Regards
Datta

Similar Messages

  • I am trying to find out if I can change a setting of the calendar in my iPhone.   When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change? SS

    I am trying to find out if I can change a setting of the calendar in my iPhone. 
    When I view calendar, in month, I would like to view it with the starting day of the week being Monday, not Sunday.  Is it possible to make this change?

    Hello SMEvans32
    You can use iCloud to share the Calendar, that way she will always be up to date on that particular section of your work calendar. If you want to use iCloud, I would recommend backing up so you have a safe copy of your data.
    iCloud: Calendar sharing overview
    http://support.apple.com/kb/PH2689
    iCloud Setup
    http://www.apple.com/icloud/setup/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.

    I'm trying to upgrade from 10.5.8 to Snow Leopard but my macbook keeps ejecting the disc.  It started to install the first time and said it needed to restart to finish, restarted but ejected the disc.  It ejects every time now.  I've also installed the 10.5.8 combo update but that didn't help it.  I've tried restarting the macbook with the disc in, holding c, all that.  Why won't this work?!

    Zap the PRAM and Reset the SMC, then try again.

  • TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

    Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
    Have you tried quitting Pages completely and the restart the iPad?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

  • About the bat file to start and stop the weblogic server10.3

    I am using windows 2003 os.
    i installed the WLS 10.3 .
    can anyone help me how to write the bat file for starting and stoping the weblogic server instance.so that it willl run as background service.
    I am new to this .Please suggest me
    Any help is appreciated.
    Thanks
    Sailaja.

    Hi David,
    yes.i am talking about Admin server.
    when i am creating the new domain,i didn't encounter any prompt asking me to run the Admin server as windows services.why i am not getting this prompt?where exactly i will get this prompt while creating domain.
    i am using the weblogic 10.3
    how can i make the admin server as windows services.
    Thanks
    Sailaja.
    Edited by: sj0609 on Dec 2, 2008 4:02 PM

  • HT4314 Game Center problem. When I try to start a new Letterpress game, I get the message "Unable to create match please try again later. When I press "OK" I get the following message, " Error starting game. The requested operation could not be completed

    ...I get the following message, "Error starting game. The requested operation could not be completed because local player has not been authenticated".
    Can anyone advise me how to resolve this please?

    You should contact the developer of the game for assistance.

  • Highlights the whole shuttle and starts scrolling down the shuttle

    Hi,
    I created a shuttle on a page and when I submit the page, which right now has no processes executing, automatically it highlights the whole shuttle and starts scrolling down the shuttle and then goes to a Page Not Found.
    I have a branch to this same page.
    What is going on.. ?
    Bill

    There is a limit of 2000 records (as far as my experience says). Over 1000 could also be over 2000.
    Try to press the save button here:
    http://apex.oracle.com/pls/otn/f?p=31517:166
    Do you get the same kind of error or something different?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

  • TS1347 Dear apple, The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT, Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones . So will you  please facilita

    Dear apple,
    The governments of Saudi Arabia has changed its weekend from THR&FRI to FRI&SAT,
    Therefore the start day of the week became SUN. unfortunately all Iphone user could not adjust this change on their I phones .
    So will you  please facilitate us on this matter.
    Regards

    Give apple feedback regarding this.
    For a temporary fix, change your region? Get a 3rd party Calendar app that fits your needs?
    I assume your current region is set in the photo?
    If so, pick a region that has a start day of Sunday. (either historically or known for the present)
    Note, with changing your region, it will change the default phone number prefix/country code for new contacts and addresses. (calling and SMS is not affected)

  • HT201263 ok, I did the above, and I waited 2 hours for this to download the "update." Then I try it again on the ipod, and it starts to redo the same download all over again !

    I started the update, and in the middle of it, the same previous screen pops up that it can't connect to the ipod,and the ipod screen goes back to "disabled." I waited it out, let the download finish. Then I had to try the process over again, and it started the download all over again, even though I just did that. Another two hours??? This is driving me mad. All for a stupid password ! How do I reset this dang thing, so I can open it. Bad enough I have to re do everything, because I have to restore it. PLEASE HELP !
    Just wanted to add that apparently the ipod is disconnecting and reconnecting to the computer somehow. I know because when you plug in the ipod, the computer makes a noise, as with any hardware. Well I click on "restore," agree to the restore, then it starts to download the update. A few minutes later, I hear the computer make the same noise, as if I have disconnected the ipod, even though I haven't even touched the cord. Then it makes the sound again, as being reconnected or plugged in, then the message pops up that it can't be connected, because a password has to be entered. The ipod screen then goes from the restore picture ( the itunes logo with usb cord) to the same "disabled, connect to itunes."
    I am not trying a different cord and seeing if that helps the plugged in portion.

    Do a manual install using the instructions here.
    have you download the update/firmware, place the iPod in recovery mode and then update/restore using the instructions in the article.
    iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch

  • APO-SCM5 Configuring the Start Day of the week (e.g., Monday)

    Where can we configure the start day of the week (e.g., Monday or Sunday).  When we release DP to SNP, order category FA=FC Reqs are falling on Monday.  I am being asked where this is set at we have seen disturbing results where some location-producta have FC Reqs on Monday and some Sunday.  We are trying to determine if there is some sort of bug in SCM 5 as in APO4.0 all FC Reqs fell on a Monday at time= 00:00:00
    Message was edited by:
            Dan Spieth

    Hi,
    You can use planning calendar (T.code md25) to define the start of the day Eg:mon/tue/wed etc.
    Regards,
    SDS

  • Regarding Start day of the week

    Suppose in a program if User enters the start day of the week be 'Tuesday', then I have to get that day of the week as '1' and end the week with 'Monday' i.e the '7'. Is there any Query or NLS_Parameter setting?

    Hi,
    Since Tuesday is 1 day after the start of the ISO week,
    TRUNC (dt) - TRUNC (dt - 1, 'IW')will be an integer in the range 1-7, where 1 means dt was a Tuesday, and 7 means dt was a Monday.
    This does not depend on NLS settings.
    NLS_TERRITORY controls which day of the week
    TO_CHAR (dt, 'D')will be '1', but all the settings I know of make that Saturday, Sunday or Monday. I don't know if there's a value that makes it Tuesday.

  • Change Starting Day of the Week to Sunday

    Hi,
    DBMS_SCHEDULER is assuming that Monday is the starting day of the week.
    Can this behavior be changed ? I need Sunday to the be starting day of the week.
    Regards,
    Salim

    So to start at 8am on sunday :
    start_date => next_day(trunc(sysdate),'Sunday') + 8/24OR
    begin 
    dbms_scheduler.create_schedule 
    (schedule_name => 'INTERVAL_DAILY_800', 
    start_date => next_day(trunc(sysdate),'Sunday') + 8/24,
    repeat_interval=> 'FREQ=DAILY; BYDAY= SUN,MON,TUE,WED,THU,FRI,SAT; BYHOUR=08;', 
    comments=>'Runtime: Every day (Sun-Sat) at 08:00 o'clock');
    end;
    /Best Regards
    mseberg

  • How can I change the start day of the week for weekly view?

    How can I change the start day of the week for weekly view?
    <P>
    This function is configured in the code in file <loadpoint>/CalendarServer/cal/uicust/en/main.html:
    <P>
    i18n['def first day'] = '1';
    <P>
    Note: 0 is Sunday, 1 is Monday, etc.

    Click system perferences below ur screen then click language&text and you just select ur peference langauge

  • How to create a recurrent event on the first or last work day of the month

    The lightning calendar allows selection of the first and last day of the month for recurrent events but for business I need to use the first and last WORK day of the month (Monday - Friday) to schedule particular tasks. In the calendar preferences under 'View' I can select the days that make up the work week but this does not transfer to an option in recurrent events. Is there another way to do this or is it just not available?

    Hi there,
    do know for the UlltimateBootCD4Win? This from CD bootable WinXP-BartPEedition with additional tools gives you the ability to make such things like partitioning, backup or formatting your HDD.
    It has many more applications which help you to maintain your system without booting your original OS.
    So I think that this CD will solve your partitioning issues.
    Heres a link: www.ubcd4win.com/
    Just try it and tell me your opinion.
    Nice weekend and greetings from the sunny south ;)

  • Things have really changed.  I can't understand how Apple could release the Lion OS as buggy as it is ?  It's like reliving the nightmare of my PC days and the Microsoft crap !  Do I have to wipe the hardrive before reinstalling Snow Leopard ?  Comments..

    Things have really changed.  I can't understand how Apple could release the Lion OS as buggy as it is ?  It's like reliving the nightmare of my PC days and the Microsoft crap !  Do I have to wipe the hardrive before reinstalling Snow Leopard ?  The amazing thing is that when I installed Snow Leopard not a hitch, ever !    My trust in Apple is gone and believe me I will think twice before doing anymore OS upgrades, **** I can go back to the PC for a lot less money.

    Adios baby! Enjoy that PC!

Maybe you are looking for