Macromedia Director

Can a file created in Macromedia Director 8.5 be upgraded to Macromedia Director 11.5?

Yes, though Director 8.5 used Havok physics, and 11.5 uses Ageia Physx. So, if you have physics in your 3D you would need to rework that.
You cna either type:
go movie ""
in the message window and choose the movie you want, or you can directly open the file, and you'll be given options for updating and backing up the file.

Similar Messages

Patch for Macromedia Director 6.0 Upgrade for Windows - DOES ANYBODY STILL HAVE IT?

Hello, I am a collector of 1990's multimedia who likes seeking out older, pre-Adobe versions of Director. I have the upgrade version of Director 6.0 for Windows, and it's unfortunately part of an early batch that comes with a corrupted copy of the Projec32.skl stub projector file, rendering 32-bit projectors made with the upgrade version of Director 6 for Windows unusable (only 16-bit projectors will work).
Macromedia released a patch on their old website to address this issue shortly after the release of Director 6 back in 1997, but I can't find it anywhere on the Internet these days. Does anyone still have this patch, and if so, can you share it with me? (FYI, the filename for the patch is "D6wpatch.exe") Or, alternatively, if any of you still have the full, non-upgrade version of Director 6 for Windows, can you share the Projec32.skl with me? (it can be found in Director's installation directory, normally "C:\Program Files\Macromedia\Director 6")
Thanks if you can provide any help,
Ryan
(EDIT 10/26/2012: addendum about alternative sharing method was added to the above text, since Director 6 and prior versions are getting harder and harder to find on eBay these days)
UPDATE 11/23/2012: I finally found the solution... after calling Adobe tech support to no avail (they searched, but didn't find it - they said that all the old Macromedia files got lost after they purchased Macromedia a few years back), I managed to solve the problem myself! I manually extracted the projector stub code from a working 32-bit Director 6 projector executable in a hex editor, and saved that code as a separate projec32.skl file. I replaced the corrupted projector stub, and I proceeded to make a 32-bit projector with a small test movie I made. And guess what - it worked! Thanks, everyone, for viewing this post. I hope that helps!

After countless hours of reading I finally discovered what the problem was. I did not read thoroughly through the support documentation which allows a person to update their IPOD video very easily simply follow the directions "and I mean the entire directions" within the following link. I would also strongly suggets following the area which state to d/l Quicktime separately from Itunes. This completely rveresed my problems, and now I have a great functioning IPOD once more.
http://docs.info.apple.com/article.html?artnum=93976

Enhanced CD features/Macromedia Director Problems...

Ok, so I know this isn't an iDVD question, but it seems that the program is 'sort of' similar (you know, creative, arty, techy, etc). So don't mad because it's a little off topic
My band is completing post-production on our EP and we'd like it to be enhanced (some quicktime videos, pictures, etc--the standard enhancements). My drummer is a multimedia director by trade, so he has created a windows version (.exe) and it's incredible. Our problem lies in creating a version that works on a mac (he's not very mac-smart). He's currently using Macromedia Director to create a projector file, but when it's exported, it doesn't run (in fact, all the coding appears in an excel file).
My question boils down to this: are we using the proper program to achieve the desired result? Do you have any suggestions, warnings, etc that would help us? Any guidance you could offer would be much appreciated.
Thanks!
~Kevin

Try posting here also:
http://www.adobe.com/cfusion/webforums/forum/index.cfm?forumid=11
http://www.tek-tips.com/threadminder.cfm?pid=247
http://www.postforum.com/forums/list.php?f=46
Might get a faster reply. Good luck.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video)

Macromedia Director MX crash

2010, 27" iMac, MacOS 10.9 and 10.6.
I am using a partition for 10.6 to run PPC apps. Suddenly Macromedia Director MX crashed and there nothing I can do to re-install it. I keep getting the same Crash Report. I have trashed the application and everything I know from the system and restarted in safe mode to no avail.
I have installed the application in another 10.6 partition of the same computer and it works fine. I am including this crash report hoping that it will make sense to some you.
I don't have a clue. Please give me some suggestions
Process:         LaunchCFMApp [201]
Path:            /Volumes/Backup/Applications/Macromedia Director MX/Director MX
Identifier:      com.macromedia.DirectorMX
Version:         9.0 (9.0r383, Copyright ©1985-2002 Macromedia, Inc.)
Code Type:       PPC (Translated)
Parent Process: launchd [126]
Date/Time:       2014-03-08 09:27:20.654 -0500
OS Version:      Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:          3930 sec
Crashes Since Last Report:           18
Per-App Crashes Since Last Report:   9
Anonymous UUID:                      F81B7310-52EF-49D4-97A3-F6FBD6812145
Exception Type: EXC_CRASH (SIGTRAP)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   libSystem.B.dylib                       0x80239236 __pthread_kill + 10
1   libSystem.B.dylib                       0x80238ad7 pthread_kill + 95
2   LaunchCFMApp                            0xb80bfb30 0xb8000000 + 785200
3   LaunchCFMApp                            0xb80c0037 0xb8000000 + 786487
4   LaunchCFMApp                            0xb80dd8e8 0xb8000000 + 907496
5   LaunchCFMApp                            0xb8145397 spin_lock_wrapper + 1791
6   LaunchCFMApp                            0xb801ceb7 0xb8000000 + 118455
Thread 1:
0   libSystem.B.dylib                       0x80142afa mach_msg_trap + 10
1   libSystem.B.dylib                       0x80143267 mach_msg + 68
2   LaunchCFMApp                            0xb819440f CallPPCFunctionAtAddressInt + 206231
3   libSystem.B.dylib                       0x80170259 _pthread_start + 345
4   libSystem.B.dylib                       0x801700de thread_start + 34
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0x802fc540 ecx: 0xb7fff9ac edx: 0x80239236
edi: 0xb8211640 esi: 0x00000005 ebp: 0xb7fff9d8 esp: 0xb7fff9ac
   ss: 0x0000001f efl: 0x00000286 eip: 0x80239236   cs: 0x00000007
   ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000037
cr2: 0x8023922c
Binary Images:
0x80000000 - 0x8005dff7 com.apple.framework.IOKit 2.0 (???) <3DABAB9C-4949-F441-B077-0498F8E47A35> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x8007d000 - 0x800e7fe7 libstdc++.6.dylib 7.9.0 (compatibility 7.0.0) <411D87F4-B7E1-44EB-F201-F8B4F9227213> /usr/lib/libstdc++.6.dylib
0x80142000 - 0x802e9ff7 libSystem.B.dylib 125.2.11 (compatibility 1.0.0) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
0x8036b000 - 0x804e6fe7 com.apple.CoreFoundation 6.6.6 (550.44) <F88C95CD-1264-782D-A1F5-204739847E93> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x805de000 - 0x805ecfe7 libz.1.dylib 1.2.3 (compatibility 1.0.0) <33C1B260-ED05-945D-FC33-EF56EC791E2E> /usr/lib/libz.1.dylib
0x805f1000 - 0x805fdff7 libkxld.dylib ??? (???) <9A441C48-2D18-E716-5F38-CBEAE6A0BB3E> /usr/lib/system/libkxld.dylib
0x80601000 - 0x80647ff7 libauto.dylib ??? (???) <29422A70-87CF-10E2-CE59-FEE1234CFAAE> /usr/lib/libauto.dylib
0x80654000 - 0x807d6fe7 libicucore.A.dylib 40.0.0 (compatibility 1.0.0) <60FF302E-5FAE-749B-BC70-0496DC2FBF2D> /usr/lib/libicucore.A.dylib
0x80838000 - 0x808e5fe7 libobjc.A.dylib 227.0.0 (compatibility 1.0.0) <9F8413A6-736D-37D9-8EB3-7986D4699957> /usr/lib/libobjc.A.dylib
0x808f9000 - 0x808fcfe7 libmathCommon.A.dylib 315.0.0 (compatibility 1.0.0) <1622A54F-1A98-2CBE-B6A4-2122981A500E> /usr/lib/system/libmathCommon.A.dylib
0x8fe00000 - 0x8fe4163b dyld 132.1 (???) <4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
0xb8000000 - 0xb81defff LaunchCFMApp ??? (???) <6437A74D-607F-7339-5F7E-F6B0EF81C25D> /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp
0xffff0000 - 0xffff1fff libSystem.B.dylib ??? (???) <2DCD13E3-1BD1-6F25-119A-3863A3848B90> /usr/lib/libSystem.B.dylib
Translated Code Information:
objc[201]: garbage collection is ON
NO CRASH REPORT
Model: iMac11,3, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 8 GB, SMC 1.59f2
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 2.1.14.6
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: ST31000528AS, 931.51 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8215, 0xfa111000 / 8
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403, 0xfa120000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: Hub, 0x0451 (Texas Instruments), 0x1446, 0xfd130000 / 5
USB Device: Photosmart D7300 series, 0x03f0 (Hewlett Packard), 0xc702, 0xfd136000 / 6
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd120000 / 3
FireWire Device: unknown_device, Unknown
FireWire Device: HDD, Fantom, Up to 800 Mb/sec

I could not get this issue resolved, so I cloned the HD with a 10.6 from my other computer, re-installed to my problem HD and fixed the issue. I make it a point to keep a spare system/HD/partition to each system I have. It saved my butt this time.

Director MX 2004 Games - Game Development with Macromedia Director examples

hi,
do you know where can I get examples for Director MX 2004
Games - Game Development with Macromedia Director from?

Hi,
Look at the Inspriation Macromedia Direcor Games and
Entertainment links at:
http://www.adobe.com/products/director/special/inspiration/games/
I have cool Director content links at:
http://www.fbe.unsw.edu.au/learning/director/resources/#cool
regards
Dean
Director Lecturer / Consultant
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au

Macromedia Director 6 in Windows 7?

Is there any way to run Macromedia Director 6 in Windows 7?

I also have a similar problem.
configuration: MacBookPro 17 "window7 ultimate sp1 (with bootcamp).
the computer starts up window.
I installed 'director 11.5' and I can not use it.
All diretcor windows (the cast, movie, code libraries, property inspector) when you place all the middle and is able to remove or move it.
See examples:
http://www.promecut.it/sharetemp/director_01.jpg
http://www.promecut.it/sharetemp/director_02.jpg
can anyone help?
More hardware info:
ram 8GB
DirectX 11
NVIDIA GeForce 9600M GT, Integrated RAMDAC, Approssim. ram 4079 MB
1920 x 1200 (32 bit) (59Hz)
DirectDraw, Direct3D, AGP : Active.
Driver 8.17.11.9716 date 03/17/2010 , WHQL: yes, DDI: 10, drive model :WDDM 1.1
processor : Intel Core Duo T9900 3,06 Ghz
Window 7 ultimate 64bit (6.1, build 7601)
hi, I discovered this additional anomaly.
This week I downloaded the latest updates for Windows 7 64bit.
I restarted the PC. I started the program and it worked.
There is one problem though: was only the laptop's screen (1920x1200) but my workstation is not this one.
I have a Matrox TripleHead2Go DP Edition with 2 hp ZR24x screens (24 ") for a final resolution of 3840x1200.
The monitor (and cover) of the laptop is closed.
The program has the same problems I describe above images to which they refer.
The same configuration is also when I use Mac Lion, however, the program works.
so in summary with MacBook Pro I installed the trial program :
Mac Lion:
only notebook screen 17" is ok
with matrox with 2 screens 24" more its notebook screen 17" is ok.
Window 7 64 bit:
only notebook screen 17" is ok.
with matrox with only 2 screens 24" the program not work correctly, is KO.... but i work with this!!!
(only 2 screens 24" because no configuration otherwise support 1920x1200 each screen)

Apple Motion vs Adobe After Effects vs Macromedia Director

Greetings,
1. Is Motion like Adobe After Effects and/or Macromedia Director?
2. What are the similarities and differences between Motion and Adobe After Effects?
3. What are the similarities and differences between Motion and Macromedia Director?
Thanks for the comments!
G5 1.8 GHz Dual Mac OS X (10.3.9)

I have noticed LOTS of people are thinking about, Motion vs After Effects. I personally think it is Apple's intention to eventually exceed AE's abilities. Right now however, I find that 'round trip' thang between FCP and Motion awfully nice, no need for a go-between piece of software like Automatic Duck.
Anyway, in sorting thru my own AE vs Motion quandry I stumbled upon the following overview, which proved insightful - While it's now a bit dated, I found it helpful - Do consider, Motion does some compositing now and I think we'll see it do a lot more in future releases.
Perhaps it may also give you some more to think about - Hope it's helpful either way.
http://www.dvcreators.net/discuss/showthread.php?t=5926

Where I can find Macromedia Director 4 / 5 / 6 software for mac

Where I can find Macromedia Director 4 / 5 / 6 software for mac?

Maybe eBay
I do have trial versions. Mostly Windows though if that's helpful.
Dean

Macromedia Director/Lingo Developer Position

I'm looking for a Macromedia Director/Lingo Developer for a 3
month contract to permanent hire position. This position is in MA.
Please contact me for more information regarding this position
Thanks,
Kim Pothen
P3, Inc.
952-955-1890

I wouldn't go as far as calling a nonexistent feature a bug,
but here's
my $0.05:
I suppose you open the webpage with something like:
gotoNetPage("
http://www.yada.com")
I'd pass a parameter on the URL indicating which CSS-file to
load as
main (and implicitly which as alternates), catch that
parameter with
whatever serverside language you have and use it well :)
so something like:
gotoNetPage("
http://www.yada.com/index.php?style=student")
Althoug probably possible, I personally would not get into
editing
cookies. Doing off-standard stuff with the internets and it's
plethora
of browsers would have me shivering.
Hope this helps,
Manno
smalbil wrote:
> My Macromedia Director DVD project has got 3 designs.
> My website has got 3 CSS scripts, that have the 3
designs as well.
> 3 Designs for the following groups:
>
> 1. for teachers
> 2. for students
> 3. for employers
>
> The website can change CSS scripts by setting a cookie.
> How can I get Director to create a cookie, so that the
users of the DVD will
> see the same design when the go to my URL. All is setup,
but the cookie.
> And please do not tell my that it doesnt excist... that
would be a major bug.
>
Manno Bult
http://www.aloft.nl
[email protected]

Convert "Classic" OS9 Macromedia Director SWF?

Hello -- I have a VERY old (1993) Macromedia Director SWF and EXE projector that I am trying to convert to something current.
Alas, the OS9 mac that I used to create it -- the HD has fried, taking my old version of Director with it, so I'm not able to do an incremental upgrade. I've tried, Lord, how I've tried...
Is there anyone out there that has successfully converted OLD Director files, and can share their solutions?
Or, even, attempt to convert these files for me?

i think you need Director 8.5, or MX? 8.5 is what i used on my old mac and
those dcr files still manage to work these days (sometimes anyway). But
now somebody helped me out and converted them to Director 12 for me.
From what i've heard you need to use a few versions of Director to convert
your files up in stages. Somebody here might have an older version and be
able to help. Sadly my CD binder that had my old 8.5 for the mac was
stolen. i don't even have a mac anymore.
Loved OS 9 btw, was the best ever
Depending on your project, you might have an easier time copy and pasting
elements from it into your new Director file, and recreating it in the
newer version. Sorry if this is pretty unhelpful, just thinking out loud.
Good luck.
On Thu, Mar 19, 2015 at 7:20 PM, Pablo Alto <[email protected]>

Adobe (macromedia) Director

I don't know if the apple people read these posts but here goes. There is a product out there so many users still use called Director. There is nothing in this world like it and Apple has no product that will do what it will do. As for making educational applications easily and sending it to a CD to play on a computer at a school is so needed. Not every classroom has access to the internet.. believe it or not. This product would be great for the ipad too... an instant screen to pull out with content that was made for the kids by the teacher (I am talking about young children). Director projectors run on shockwave but I have been reading threads that Apple could make it possible to allow this to happen. I know that the ipad is mainly to buy apps etc to use on the thing but that is just not good enough for educational purposes. Flash is not an option with me. And all of Adobe other (real adobe products) cost alot of money to do what Director can do in the education realm (making quizzes and interactive stuff) I don't even program and use the behaviors only with a little on line help and can make something with my classes own information (pictures, video and right and wrong feed back). Macromedia was at the beginning a Mac only product. It is a great program and Adobe bought it several years ago is just letting it die a slow death because they are all for flash. I wish that Apple would see the need to support a program that educators could use in our classrooms that is not an app and not showing a video from utube. I am a pre-school traveling teacher and I want to travel around with the ipad.. but for now.. it is just not able to do what I can do in rural areas without access to internet and I do not have the money to but the other service. Thanks for listening.

Hi there,
These are user-to-user discussion forums that are meant to be of help to those with technical problems having to do with software or hardware. When you have a problem, this is a great place to post to see if others who are more experienced in the field can help. Apple does not read most of these threads, as they are mainly here for other users (such as yourself) to comment on.
If you want to provide feedback to Apple on one of its products you might find this link useful:
http://www.apple.com/feedback/
If you are wanting Apple to consider creating a similar product to the one you suggested, click here:
http://developer.apple.com/contact/
As for Adobe, have you checked out their education discounts? I recently purchased After Effects with an $800 educational discount that I got simply from showing some proof of where I teach.
Sasha

Where to Buy Macromedia Director MX 2004 (ver 10)

I have an application that uses CTX files created from MX 2004. Newer versions won;t work and the developer fo tha application has no plans on upgrading the application to make it compatible with newer versions of Director.
I have searched in vain to find someplace to purchase of copy of MX2004.
Ten years is old for software but not ancient; I find it strange that in this day and age there's nothing available.
Does anyone have an idea of where I might be able to locate this?

Did you try Amazon?
Amazon.com: director mx2004: Software

ISO: Macromedia Director 2, 3 or 4

Need very old version to access content on old files. Would appreciate any assistance or leads. Thank you!

Hi maura007,
The upgrade path is versions 4 > 6 > (8.5 or MX2004) > 11
see:
http://forums.adobe.com/thread/1455833?tstart=0
http://help.adobe.com/en_US/Director/11.5/UsingScripting/WScf09ce35f85d76b4-4fdb6b3c11d558 55946-7eb1.html

Macromedia Director 8.5 Shockwave Studio日本語版

■OS:WindowsXP Professional
■メモリ:１GB
■CPU:Core2Duo 2.4GHz
タイトルのアプリケーションを使用しているのですが、データ(4GB程)保存時に、
「仮想メモリが足りません。今すぐ保存しますか?」と表示されてしまいます。
保存は行えるのですが、同ファイルを開こうとすると「致命的なエラーが発生しました。Directorを終了します」と表示され、開けません。同ファイルを他の人のPCで開こうとしても同様のメッセージが表示され、開けません。
本当に仮想メモリが足りないのか、そもそも作り方に問題があるのかが、判断ができかねてしまいます。
何か原因等分かりましたら御教示いただけませんでしょうか

Hi Keosk. Does it have to be local? You can contact me ([email protected]) and I can help / offer advice.

Macromedia Director 8.5 Resources in Toronto Canada

Seeking a local IT contact to support existing 8.5 work and to migrate to newer version.

Hi Keosk. Does it have to be local? You can contact me ([email protected]) and I can help / offer advice.

Macromedia Director

Similar Messages

Maybe you are looking for