Macromedia Projector has stopped working
Downloaded latest version of HP Scanjet 5590 drivers and software, but when installing I continue to receive "Macromedia Projector has stopped working" error message. I have downloaded latest version of Adobe Flash.
Kent
Hello ecdon, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are experiencing installation issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Good luck and please let me know the results of your findings. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.
Similar Messages
-
ERROR MESSAGE "MACROMEDIA PROJECTOR HAS STOPPED WORKING"
I am using Windows Vista, and can no longer play any of my
games. Was able to play before now I get this stupid
error message: "Macromedia Projector has stopped working." I
have tried redownloading the games again, tried redownloading the
Flash and shockwave players, still nothing. HELP!I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again. -
"adobe projector has stopped working"
How do I overcome the error message "adobe projector has stopped working" in order to access tuturial to Bamboo tablet?
I'm having this problem, as well... I find it interesting because I'm trying to re-install my Intuos4 tablet, which I did a few weeks ago on the same computer with no problems, but now I am getting this Adobe Projector error message. I'm not even sure what Adobe Projector is, I just want an answer to how I can fix this so I can start using my tablet again.
-
Bizarre Vista Error - Macromedia Flash Player 8.0 r22 has stopped working
In Vista Ultimae, I now suddenly get a message after starting
up saying:
" Microsoft Windows
Macromedia Flash Player 8.0 r22 has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is
available."
I have a current Adobe Flash installation.In Vista Ultimae, I now suddenly get a message after starting
up saying:
" Microsoft Windows
Macromedia Flash Player 8.0 r22 has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution is
available."
I have a current Adobe Flash installation. -
Error: "Authorware Runtime has stopped working"
I'm trying to fix a problem our students are having with an
instructional CD that was made by Ivy Software. I'm getting an
error "Authorware Runtime has stopped working". I have spent a
considerable amount of time trying to diagnose and fix this
problem.
So far we have been unsuccessful getting it to work on a
Lenovo factory (OEM) HDD image. It works fine on all other PCs
running any OS and any version of IE. I’m providing some
links to documentation I found that may be of help with the
diagnosis, although none of these documents have solved the
problem. I have also noticed that the web installation, the first
link below, for the newest version of the Authorware Player errors
out on the Lenovo image but works on other PCs. I have put a call
into Adobe to get the distributable installer for this updated
version, as described in the 13295 "Technote", but I'm not holding
my breath. The Adobe support rep. said they would mail me an FTP
location to dl this installer, "if they can find it". :-P
It appears that there is no installation, the entire module
runs directly from the CD and does not install anything to the HDD.
The files on the CD utilize the Macormedia product called
Authorware which comes as both a development program and an add-in
for browsers. The error message we get when we autorun the CD is
"Authorware Runtime has stopped working". It isn't clear to me
exactally what it is running from the CD and or from the OS when
displaying this Macromedia Authorware software CD, since the Task
manager shows only "start.exe" running from the CD. Start.exe shows
it is Macromedia Authorware 7.02 in its file properties.
Macromedia Authorware Player Download Center
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveAuthorware
Authorware Web Players
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15966&sliceId=1
Troubleshooting Authorware Web Player for Windows
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14720&sliceId=1
How to install or uninstall the Authorware Web Player ActiveX
control
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_13295&sliceId=1
Any help that can be provided would be greatly appreciated.
Sincerely, GarthUpdate:
We fixed the problem. If we add the AW7.ini file the program
runs fine. We created a batch file to do this automatically. Here
are the lines in the batch file for your later use/analysis...
@echo off
@echo .
@echo .
@echo Attempting to patch your system...
@echo [MMXTechnology] > c:\windows\A7W.ini
@echo MMXEnableCheck=1 >> c:\windows\A7W.ini
@echo .
@echo .
IF EXIST c:\windows\A7W.ini (GOTO SUCCESS)
@echo !!!!!!!!!!!!!
@echo PATCH FAILED
@echo !!!!!!!!!!!!!
@echo
@echo PLEASE RUN THE PATCH AS ADMINISTRATOR
@echo Click on the IVY Patch icon with your right mouse
button.
@echo From the menu that appears
@echo select RUN AS ADMINISTRATOR.
@echo
@echo .
@echo If you continue to have trouble, please contact
JohnDoe:
@echo [email protected]
@echo (800)123-4567
GOTO END
:SUCCESS
@echo PATCH APPLIED SUCCESSFULLY
@echo You may now use the IVY Software.
:END
pause
Normally, when the authorware exe file (start.exe) autoruns
from the Ivy CD it writes the AW7.ini file to the
"C:\Users\%UserProfile%\AppData\Roaming\Macromedia\Authorware 7"
folder. On our systems that file does not get created. I've checked
the permissions on the parent directories, even created these
directories manually, and then copied the AW7.ini file to that
location but the program still fails.
Hope this helps someone else in the future.
~Garth -
"Adobe Flash CS5 has stopped working" error anytime i do anything - HELP PLZ!
Hi there,
I have used Macromedia Flash MX for many, many moons. Finally, when I got Windows 7, I was VERY excited to get updated on MX and move to Adobe Flash Professional CS5. However, i have never once been able to use this program, as it crashes pretty much every time i try to do anything. However, since my upgrade, i've noticed a lot more crashing in MX as well (i still have it installed on my old HD and have been using it to build videos rather than CS5 since it crashes less frequently). Now, i'm at my wit's end. I get the above error message when i do pretty much anything, but most recently it's EVERY time i try to select all unused files from the library. The error message i get in MX is "Flash 6.0 r25 has stopped working," but it's the same exact problem in the problem signature as CS5's:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 11.0.0.485
Application Timestamp: 4badda9d
Fault Module Name: Flash.exe
Fault Module Version: 11.0.0.485
Fault Module Timestamp: 4badda9d
Exception Code: c0000005
Exception Offset: 005c0478
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
If i try to select "Check online for a solution," in MX it just kills out of the program, but in CS5 it gives me a second error before killing out:
Problem signature:
Problem Event Name: APPCRASH
Application Name: Flash.exe
Application Version: 11.0.0.485
Application Timestamp: 4badda9d
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521ea8e7
Exception Code: c0150010
Exception Offset: 0008482b
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional Information 1: 2865
Additional Information 2: 2865b1bb537c4d5e61b79207bc968f0a
Additional Information 3: 2116
Additional Information 4: 2116da8c99f9527466231198673244ae
PLEASE tell me there's a way to fix this. I've tried everything I can think of and have to get this video done in the next few days!!!! I would love to be able to start using CS5 and ditch the ancient MX on my slaved drive, but I can't get CS5 to work!
Thanks.3. (Windows) Disable Compatibility Mode.
For information on compatibility mode, see Using Windows 7 or Vista compatibility mode.
Windows Compatibility Mode can cause errors to occur with Adobe Creative Suite products. To disable it, do the following:
Navigate to C:\Program Files\Adobe\[application name].
Right-click the product application file and choose Properties.
In the Compatibility tab, deselect all options under Compatibility Mode, Settings, and Privilege Level.
Click OK, and relaunch the Adobe Creative Suite 5 product.
4. Disable startup items and services.
Applications running in the background can prevent Creative Suite 5, CS5.5, and CS6 products from launching. For instructions on temporarily disabling these items, see the following documents:
Disable startup items and Services (Windows XP)
Restart Windows in a modified mode (Windows 7 and Windows Vista)
Start the system in Safe Boot mode (Mac OS)
5. Log in using a new local administrative user account.
A new local administrative account can rule out network policies, corrupt profiles, and incorrectly setup administrative accounts as the cause of a failed launch. To create a local administrator account, see the following:
Windows XP: Choose Start > Help And Support and see the article "Add a new user to the computer," or contact your system administrator.
Windows Vista/Windows 7: Create new local administrator account (Windows Vista) (kb404912)
Mac OS: Creating and modifying user accounts on the Apple support website. This video demonstrates the procedure to create a Standard user account. To create an Administrator account, select Administrator in the New Accounts menu.
6. Delete all Adobefnt*.lst files
Search for and delete all copies of the AdobeFnt*.lst file that you find on the hard disk:
(Mac OS) In the Finder, choose File > Find (Command + F).
(Windows XP) In Explorer, click the Search button (Ctrl+F).
(Windows Vista/7) In Explorer, use the search box in the upper right (Ctrl+F).
Type Adobefnt*.lst and then click the Search icon. If you have more than one hard drive, only search the system (OS) drive.
(Windows XP Search Assistant) Choose All Files and Folders. Under More advanced options select Search System Folders, Search hidden files and folders, and Search subfolders.
Click within the search results. Choose Edit > Select All, and then drag the selected files to the Trash (Mac OS) or Recycle Bin (Windows).
(Mac OS) Choose Finder > Empty Trash.
Restart the application.
If an Adobefnt*.lst file becomes damaged, it can cause the application to crash, freeze, or quit when you try to start it. Adobefnt.lst files (for example, Adobefnt10.list for InDesign) are font cache files that Adobe applications use to quickly gather and store information about available fonts. If you delete or rename an Adobefnt.lst file, the application re-creates it the next time you start the application.
7. Troubleshoot font issues.
Remove or disable nonessential fonts and then restart your Creative Suite application. See:
Reduce the number of active fonts (Windows XP)
Reduce the number of active fonts (Windows 7 and Windows Vista)
Troubleshoot fonts (Mac OS)
8. (Windows) Update your video card driver.
Download the latest driver from your video card manufacturer's website or contact the manufacturer for an updated driver.
9. Search the knowledgebase for errors.
Search the Adobe knowledgebase for any errors that appear:
Go to the Adobe Support website and choose your product from the Select Product Support Center menu.
Type the error into the search field and click Search.
Note: Omit file paths and registry keys from the search string.
10. Run the Adobe Support Advisor.
The Adobe Support Advisor is an AIR app that helps identify and resolve installation issues. It can also assist with errors that occur when AMT is running. For more information, see Using the Adobe Support Advisor (kb405816) and Troubleshoot launch errors using Creative Suite launch logs (cpsid_83478).
11. Perform system troubleshooting steps
Follow the steps in Troubleshoot system errors and freezes | Adobe software on Windows (cpsid_82252) or Troubleshoot system errors and freezes | Adobe software on Mac OS (cpsid_82414). -
Photoshop Elements 6 Licensing for this product has stopped working.
Hello,
I have just done a clean install of Snow Leopard (after wiping my hard disk), then restored my system (without applications) from my Time Capsule. I have then successfully re-installed most of my software.
However, after re-installing Photoshop Elements 6 from the original DVD, I get the following error message:
Licensing for this product has stopped working. You cannot use this product at this time......
This appears as soon as I attempt to run the program from my Applications folder and Elements closes as soon as I click OK and does not allow me to input my license key.
Anyone any ideas?
Thanks,
Philip.Hiya Philip M,
most Adobe products work by the licencing system installing some sort of "correct" answer-code when adobe connects to verify the authenticity of your product. I think, you may have to contact Adobe.
When I ran Macromedia Dreamweaver, you were able to "transfer licence" (PRIOR to uninstalling from one machine and installing on another), which would send the signal to "free up" the correct (and authentic) licence and then install on your other machine. This facility has been removed (no doubt to protect the product) and I had to pay for a new disk (a bit of a pain); maybe you are luckier but check adobe's help site:
http://www.adobe.com/support/photoshopelements/
good luck -
Flash 6.0 r25 has stopped working...
I purchased the Macromedia Suite a few years ago and today I installed everything on a new laptop, but when I try to open Flash I get a message stating...
"Flash 6.0 r25 has stopped working"
I am given two options
1. Check online for a solution and close the program
2. Close the program
The problem details are listed as...
Problem Event Name: APPCRASH
Allication Name: Flash.exe
Application Version: 6.0 r25.0
Application Timestamp: 3c88582e
Fault Module Name: ntdll,dll
Fault Module Version: 6.17601.18229
Fauld Module Timestamp: 51fb1072
Exception Code: c0000005
Exception Offset: 0002e066
OS Version: 6.1.7601.2.0.768.3
LocaleID: 1033
Additional Information 1: c3a6
Additional Information 2: c3a6e12b3471cf0446336182f39020f9
Additional Information 3: a542
Additional Information 4: a542c57554703160958dddc65ff4e5ac
I know this version is probably ancient history by know, but it is what I have to work with. I eagerly await your assistance.Thank you for the reply. I actually stumbled upon a solution myself and want to make this information available to any other poor boys like me. I found a Troubleshoot Compatibility option in a Program Data Options Window. When I ran the troubleshooter, it indicated that my current Windows program had a color issue and needed to revert to a color option of a prior Windows version. It made mention of Windows XP Service Pack 2. It said that it would run Flash 6.0 on the older colors and return to Aero when I closed the program. I hope this helps somebody in the future,
-
Fireworks 8 on Vista Has Stopped Working
HI all,
I recently installed Macromedia Firefox 8 on my HP 6720s. For the first 2 or 3 uses I didnt get any error but somehow, I dont know what went wrong, anytime I start the program, i get "Firefox has stopped working"
Here is the Signature
Problem Event Name: APPCRASH
Application Name: Fireworks.exe
Application Version: 8.0.0.777
Application Timestamp: 430ca5aa
Fault Module Name: StackHash_9cfd
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c0000005
Exception Offset: 01b73ec0
OS Version: 6.0.6000.2.0.0.768.2
Locale ID: 1033
Additional Information 1: 9cfd
Additional Information 2: aea2a0d7a408bfb90d70a40b35741536
Additional Information 3: add1
Additional Information 4: e86fd8f76207b04502fc8a8c6058a723
I uninstalled and reinstalled again, i get the same error. I created a new user account and i get the same error. . .
Help!!!Hey Guys
I was having the same problem with CS3 crashing when more than 1 file was open - as has been said using a local printer was the fix.
*HOWEVER*
A better way to do this, for all you guys with network printers - is to "trick" photoshop into thinking your network printer is a local printer! To do this depends on how the printer is shared - if it is a proper network printer that is accessible through the IP address, just add a new printer in windows but for the port you have to go to "Create a new type of port" and choose TCP/IP Port from the drop down list, enter the IP address in the next screen then choose your driver and you're off! This method worked perfectly for me.
If it's shared through another computer (IE the printer is connected to the other PC then that PC connects to the network to share it) you should be able to do it by following the steps above but instead of choosing TCP/IP Port choose Local Port, and for the port name enter \\computername\printername (changing computername to the name of the PC (as you would connect to it through network places, and printer name to the share name of the printer, ie what you see when you browse to the computer that is sharing it). Note I did not test with this method, but theoretically it should work.
Hopefully this helps a few of you guys out :)
Warren -
I use windows vista and I have upgraded my itunes. Now when I open it, it gives me a message saying "itunes has stopped working" and then gives me a message saying it will notify me for a solution. What can I do to fix this so it can open and not give me any more problems???
First you can try;
Try restarting PC and run itunes again!
If error again than perform clean instal of itunes (uninstal first and than instal again)! -
AdapterDeviceID: 0x9712
AdapterDriverVersion: 8.861.1.2000
AdapterSubsysID: 164c103c
AdapterVendorID: 0x1002
Add-ons: %7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D:33.1.1
AvailablePageFile: 13967405056
AvailablePhysicalMemory: 6222434304
AvailableVirtualMemory: 3783245824
BIOS_Manufacturer: Hewlett-Packard
BlockedDllList:
BreakpadReserveAddress: 46661632
BreakpadReserveSize: 41943040
BuildID: 20141113143407
CrashTime: 1417153956
EMCheckCompatibility: true
EventLoopNestingLevel: 1
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1416895140
Notes: AdapterVendorID: 0x1002, AdapterDeviceID: 0x9712, AdapterSubsysID: 164c103c, AdapterDriverVersion: 8.861.1.2000
D2D? D2D+ DWrite? DWrite+ D3D11 Layers? D3D11 Layers+
ProductID: {ec8030f7-c20a-464f-9b0e-13a3a9e97384}
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 175
StartupTime: 1417153798
SystemMemoryUsePercentage: 25
Theme: classic/1.0
Throttleable: 1
TotalPageFile: 16630353920
TotalPhysicalMemory: 8316153856
TotalVirtualMemory: 4294836224
URL: https://support.mozilla.org/en-US/questions/new/desktop/fix-problems/form?search=mozalloc.dll&step=aaq-question
Vendor: Mozilla
Version: 33.1.1
Winsock_LSP: MSAFD Tcpip [TCP/IP] : 2 : 1 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [UDP/IP] : 2 : 2 :
MSAFD Tcpip [RAW/IP] : 2 : 3 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [TCP/IPv6] : 2 : 1 :
MSAFD Tcpip [UDP/IPv6] : 2 : 2 : %SystemRoot%\system32\mswsock.dll
MSAFD Tcpip [RAW/IPv6] : 2 : 3 :
RSVP TCPv6 Service Provider : 2 : 1 : %SystemRoot%\system32\mswsock.dll
RSVP TCP Service Provider : 2 : 1 :
RSVP UDPv6 Service Provider : 2 : 2 : %SystemRoot%\system32\mswsock.dll
RSVP UDP Service Provider : 2 : 2 :
useragent_locale: en-US
This report also contains technical information about the state of the application when it crashed.
AND:
A plugin container for firefox has stopped working.
Problem signature:
Problem Event Name: APPCRASH
Application Name: plugin-container.exe
Application Version: 33.1.1.5430
Application Timestamp: 54656826
Fault Module Name: mozalloc.dll
Fault Module Version: 33.1.1.5430
Fault Module Timestamp: 54654321
Exception Code: 80000003
Exception Offset: 00001425
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409Try creating a new Profile by following the steps from [[Managing Profiles]] [[Troubleshooting extensions and themes]] and also [[The Adobe Flash plugin has crashed]]
-
I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
"Check online for a solution and close the program"
"Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
Here are some of the Problem Details:
"Problem signature: APPCRASH
Application Name: iTunes.exe
Application Version: 11.0.1.12
Application Timestamp: 50c8fc7e"I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony -
When I click on the itunes shortcut or the program I get the following message:
ITunes has stopped working. My two options are: Windows can check on line for a solution to the problem or close the program.
It seems that my entire library is not there. If I sync my ipod will it add it back into my library on the computer?
I've even tried installing again and nothing works. Tried the "repair" and it says that ITunes is loaded but I stil get the above error when I try to open the program.
ThanksLet's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
When I click on any of my movie or TV shows in Itunes I immediately get an error message that says Itunes has stopped working and closes the program. I can sync the movies and shows to my phone okay but I can't watch on Itunes. Can anyone help?
Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows -
ITunes 10.3.1 has stopped working in Windows 7 64bit
I just upgraded to Windows 7 64 bit and I downloaded iTunes 10.3.1 for Windows 7 64 bit. My Quicktime player is working fine but everytime i tried to open iTunes, it gives me an error message that says iTunes has stopped working. I need help trying to fix this, I already tried uninstalling, re-installing, and mostly every suggestion in the Apple support forum and it still does not work.
This is the information I have on the Problem Details:
Problem Event Name: BEX
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: StackHash_0a9e
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Offset: 00000000
Exception Code: c0000005
Exception Data: 00000008
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789Try copying the QTMovieWin.dll in the c:\program files (x86)\common files\apple\apple application support folder to the c:\program files (x86)\iTunes folder. I had same problem and it's fixed this bug.
Maybe you are looking for
-
My Mini-DVI to HDMI to TV connection stopped working - tried everything
I have been using a generic mini-dvi to hdmi dongle plus a HDMI cable to connect my white intel imac to my television. It has worked great and flawlessly until very recently. Now the TV says "no signal". Screen still flashes blue when dongle is plugg
-
Getting Asus ATI 4870 to work in my Mac Pro. Not working. please help!
I read here on these boards that an ATI 4870 would work in an early model (in my case, 2006) Intel Mac Pro. I jumped in hastily and bought the Asus branded card: EAH4870 I connected it, and nothing... did not work. I do not think it is a Mac version
-
We have just techincally upgraded to BI7. We've set the setting in the SPRO so that when we type RRMX, the old version (3.x) of BEx will be opened. We've also deployed the new BI7 Logon Pad. Now we've both 3.x and BI7 BEx Explorer from the Start ->Pr
-
Hi, For a particular timecard. The timesheet has 2 versions. The days has 2 versions, but the detail have 3. So the max version number on the timesheet is 2. The max version number on the DAYS is 2. But the max version number in the detail is 3.
-
File transfer settings not working
Hello, I am trying to figure out why I am not able to transfer certain files even after allowing them via the management shell and/or the Lync admin console. I keep getting the error that "We can't transfer this type of file because it can contain