Macromedia software won't run anymore!

I have a Mac Mini with OSX 10.3.9, I have been using Dreamweaver for years but recently it's stopped working, along with Fireworks, Flash and Freehand, all of which are MX 2004.
If I try and open any of them the icon just bounces a bit then stops and nothing opens. I have checked that they are all set to 'read & write' in the info.
i recently had some problems and had to reboot from disks and do various things, it may been since then. I have re-installed each program, but they still aren't working. Someone suggested it might be the 'disk permissions' but having checked through a help document regarding this I am still having the problems with the programs.
Can anyone help me at all???
Thanks!

Hi ben_there-
Have you repaired permissions yet?
This may be helpful: About Disk Utility's Repair Disk Permissions feature
Luck-
-DaddyPaycheck

Similar Messages

  • HT5313 Now I installed MAc Os X 10.7.5 Photoshop 11.0.2 won't run anymore. Who know's the clue? Do I need to update to CS 6?

    Now I installed Mac Os X 10.7.5  Photoshop 11.0.2 won't run anymore. Who know's the clue? Do I need to update to CS 6?

    Now I installed Mac Os X 10.7.5  Photoshop 11.0.2 won't run anymore. Who know's the clue? Do I need to update to CS 6?

  • Fan won't run anymore

    After I've reseted the PMU, the computer fan won't run anymore and I think that is what's causing the computer to overheat. Is there any way I can fix this?

    I just tried cleaning the dust in the holes with a Q-tip and I think I accidentally poked the fan and it started running again. Did it stop running because dust was building up? If so, is there any way I can get most of the dust out? Thanks.

  • Audition CS6 won't run anymore

    My version of CS6 used to run perfectly until I used Malwarebytes, which removed amtlib.dll
    Now it won't run at all, even though I've put amtlib.dll back. I keep on getting the 0xc000007b error, and I can't uninstall the program at all. What do I do to fix this problem? It's extremely frustrating. Nothing I have done has fixed this, and I've tried many times to remove it, such as command prompt, the windows uninstaller (it doesn't show up), and multiple programs such as ccleaner.

    If Ryclark's suggestion still doesn't work I would strongly recommend finding and downloading the free version of Revo Uninstaller, from Download Revo Uninstaller Freeware - Free and Full Download - Uninstall software, remove programs, solve uninstall probl… The Pro version can be used for 30 days as a trial; speaking personally I think it's well worth the money!  The Portable version is especially useful to keep on a pen drive; you can then use it on any computer.
    I've needed to use it on more than one occasion when faced with similar problems (a program that is now "corrupted" but cannot be uninstalled by any standard method).  If Audition is not listed as installed when you run Revo, use the Forced Uninstall mode and simply point it to the folder where AA currently is.
    One word of caution: Revo Pro creates a full back of your registry etc., before beginning the uninstall routine.  I don't think the free version does, so do create a System restore point before running it.
    HTH
    Jeff

  • Trial premiere pro cs6 won't run anymore

    Hello, I downloaded a trial for premiere pro cs6 yesterday and it worked great. But today, it wouldn't run anymore. I got the message that the program 'could not find any capable video play modules. Please update your video display drivers and start again'. I totaly didn't get it, but i restarted my laptop and then it worked. But an hour later, after closing the program, i wanted to open it again and i got the same message. This time, it didn't run after restarting.
    Can someone please tell me what to do? How do i 'update my video display drivers'...? And how come i have to do this all of a sudden? I have a brand new laptop and i worked with premiere pro cs5 before.

    >How do i 'update my video display drivers'...?
    You go to the vendor web site (nVidia or ATI or ???) and check updates for your brand/model
    Also, since you provide zero computer information, some links that may, or may not, help
    Display driver http://forums.adobe.com/message/4943624
    -also link to info on bad driver text file
    Dual video laptop problems
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -link to why http://forums.adobe.com/message/4685328
    -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
    -Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
    For future reference, please post more information about your computer - Information FAQ http://forums.adobe.com/message/4200840

  • HMRC software won't run with Firefox - is there an easy to switch back to Int Explorer and then revert to Firefox after completing task?

    Free HMRC software will not run properly as it creates tabs using the browser. HMRC technical support have confirmed I must switch back to Internet Explorer to complete the required tasks, otherwise the software will not work properly.
    Is there a quick way to change default web browser without having to uninstall Firefox each time?

    You can use an extension like IE Tab or IE View to use the IE rendering engine in Firefox.
    * IE Tab Plus (FF 3.6+): https://addons.mozilla.org/firefox/addon/10909/
    * IE View: https://addons.mozilla.org/firefox/addon/35
    * IE View Lite: https://addons.mozilla.org/firefox/addon/1429

  • Muse crashed, won't run anymore: user id mismatch

    I was running muse, and it crashed. Now, when I try and start it.. it won't run at all.
    Pretty useless..

    Hello,
    please do the following steps and you will be all set.
    1. Sign out from Muse By going to Help > Sign out. (if you see the option to do that)
    2. Sign out from Creative Cloud Application. (Steps are mentioned in the link Sign out, Sign in | Creative Cloud Desktop app), then Quit Creative Cloud Application.
    3. Rename the "OOBE" folder to "OOBEold"
    MAC : (This folder can be found at Finder > Go > Go to Folder> Type ~/library/application support/Adobe > Hit return)
    Widows : ( This folder can be found at C:\Users\<username>\AppData\Local\Adobe )
    4. Relaunch Muse, Sign in with your Adobe ID.
    Please let me know if the steps above do not work or if you have any confusion.
    Regards
    Vivek

  • Upgrading to iTunes 7.1.1 - iTunes won't run anymore but no error message

    I just downloaded update 7.1.1 and now I cannot start iTunes anymore. I open iTunes and a bar appears which says "Upgrading iTunes library". After showing 3 little bars in the big bar, nothing happens anymore. No error message at all and Quick Time Player seems to run just fine. Any suggestions?

    Jason,I used the troubleshooting link you gave and so far have 1.Fixed Digital Signing for Windows drivers.(didn't help) 2.Removing Itunes configuration files.
    In this one I was told to delete the SC info.sidb file (I didn't have one of these when I got to the folder where it was supposed to be)The thing I haven't done is the mscofig.instruction. I was saving it for last as it sounded like it could really make a lot of changes to my computer.The Itunes installation icon is still on my desktop so I clicked on it and there was a link that said it would repair missing or damaged files in the Itunes software. It didn't help either. I can click on Itunes all day long and it won't open.I can't access the library either. I am going to do the last step you suggested and uninstall my security software and see if that helps. I appreciate all the help Jason.

  • MacBook Pro odd display issue, won't run anymore

    This is a 2006 MacBook Pro 15" A1211  Intel core 2 duo 2.16 model.  Diagnostics says nothing is wrong.  The computer is no longer functional as it won't go beyond this screen.  Any ideas what failed on this?    Initially the odd video pattern was intermittent and if you booted a few times you'd get in and be able to use the computer and could get in via safe mode, but not any longer.

    This is not a petty software issue. You Mac has a hardware problem, and you need to get it looked at.
    You can make an appointment at the genius bar at your local Apple store, and they will evaluate it for nothing, in warranty or out of warranty.

  • Old Ipod Software won't run iTunes 7

    So I am getting ready to fly home and I had gotten a brand new ipod ( I had an old 80 gig video and got a new one!)
    so I install the new Itunes 7.1 ( after uninstalling the old iTunes of course) and it tells me that it cannot update iTunes because of the Ipod software and to uninstall the software and try again.
    I have uninstalled everything but when I click to uninstall the Ipod MAIN thing off of my add and removes programs.. it won't uninstall.
    What's going on?

    uninstall the Ipod MAIN thing off of my add and removes programs.. it won't uninstall.
    if Add/Remove won't let you remove a version of the iPod Software, download and install the Windows Installer CleanUp utility. use it to remove the installation configuration of any entries called "ipod for windows [date]" or "ipod updater [date]".
    Description of the Windows Installer CleanUp Utility
    restart the PC. does an itunes install go through properly after that?

  • Desktop Software won't run - so I can't transfer from my current Bold to my new Torch 9800

    I currently have desktop software operating on Microsoft XP SP2 with a Blackberry Bold. The desktop software was loaded approx 18 months ago.
    I have upgraded to a Torch 9800 and wish to transfer my existing info from my Bold onto it via the desktop software. I have attempted to download the latest desktop software but ultimately it ends in a message stating that the application requires XP SP3 to run.
    Are there any solutions other than upgrading my OS? An earlier version of desktop software that will work with both XP SP2 and a Torch 9800 perhaps?
    Cheers

    Correct, the current Desktop Software does require WindowsXP, service pack 3.
    Check your Private Messages from me in this forum.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • TeachUComp software won't run on MacBook

    Twice I have had this company send me their "Photoshop Elements Made Easty" video tutorial.  When I put it in the DVD drive, it opens with this folder but will not run.
    I contacted the company and they claim that they have sold their software to Mac Users for many years.  Does anyone know why I can't seem to make it run?  What am I doing wrong?
    Mary Lou
    Message was edited by: Mary Frost

    It would appear you have software for Windows, not for a Mac. If they do not make a Mac version, then you need to run Windows in order to use the software.
    Did they send you the software or did you download it? If the latter then you downloaded the wrong version.
    Windows on Intel Macs
    There are presently several alternatives for running Windows on Intel Macs.
         1. Install the Apple Boot Camp software.  Purchase Windows
             XP w/Service Pak2, Vista, or Windows 7.  For Boot Camp
             4.0 and above you can only use Windows 7 or later. Follow
             instructions in the Boot Camp documentation on
             installation of Boot Camp, creating Driver CD, and
             installing Windows.  Boot Camp enables you to boot the
             computer into OS X or Windows.
         2. Parallels Desktop for Mac and Windows XP, Vista Business,
             Vista Ultimate, or Windows 7.  Parallels is software
             virtualization that enables running Windows concurrently
             with OS X.
         3. VM Fusion and Windows XP, Vista Business, Vista Ultimate,
             or Windows 7.  VM Fusion is software virtualization that
             enables running Windows concurrently with OS X.
         4. CrossOver which enables running many Windows
             applications without having to install Windows.  The
             Windows applications can run concurrently with OS X.
         5. VirtualBox is an Open Source freeware virtual machine such
             as VM Fusion and Parallels that was developed by Solaris.
             It is not as fully developed for the Mac as Parallels and VM
             Fusion.
    Note that VirtualBox, Parallels, and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc.  There are performance differences between dual-boot systems and virtualization.  The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech Labs- Virtualization Benchmarks, January 2013 | MacTech for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
    You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

  • Software won't run - Please Help!

    We recently installed several programs for my son that use the QuickTime player. In each instance after the title sequence plays we receive a Windows error message stating that the software has encountered a problem and needs to close. It thens gives us the option of sending an error report to Microsoft. After reporting it, Microsoft had a link to what caused the issue and stated that it was a problem with QuickTime and stated that we can try to download the latest version of QuickTime. We completely removed the old version and downloaded version 7.3.1 and it still happens. We are running XP Pro SP2.
    We can't figure out what is going on...can anyone help??

    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • Safari and Internet Explorer won't run anymore on 10.2.8

    I cant get Safari or Internet Explorer (IE) to work on my iMac anymore. I can get iTines downloads and standard updates, but Safari and IE won't work - usually Safari will open (IE will usually not open completely - hangs up and must be force quit). Any ideas?

    Try deleting the preference files for each.
    Go to Users/yourusername/Library/Preferences and delete com.apple.Safari.plist and com.microsoft.explorer.plist.
    John

  • ITunes won't run anymore.

    I have had itunes for about 6 months now, and it has never encountered any problems, suddenly i get this error:
    [IMG]http://i23.photobucket.com/albums/b370/church_pk/untitled-1.jpg[/IMG]
    I have reinstalled it many times, and quicktime, each seperatly, and it still says that problem when i try to open itunes, does anyone know how you resolve this problem??
    dell   Windows XP Pro  

    good, you've got a standard version of XP Pro ... which means that you've probably got a version of the QT #80040707 that we don't see so much any more (caused by either a damaged file, or compromised installation configuration information). so let's first try the old-fashioned technique for dealling with it.
    Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
    Description of the Windows Installer CleanUp Utility
    next use the QuickTime component of the complete uninstall instructions in the following document as a guide to a manual removal of leftover QuickTime program files and folders.
    Trouble installing iPod, iTunes, or QuickTime software in Windows
    once we've got all the existing QuickTime scraped away, let's try a careful standalone QT 7.1 reinstall.
    download and save a copy of the QT 7.1 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
    Quicktime 7.1 Standalone Installer
    if that install goes through okay, does your itunes launch properly again?
    (if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)

Maybe you are looking for

  • Cisco UC Integration for Microsoft Lync Release 8.6.2 Question

    Hello Team, Could you please advise if CUCI-Lync integration 8.6.2 supports CUCM 9.1(2) and CUC 9.1.(2)? I checked the release notes for this version, and it does support CUCM 9.0, but CUC 9.X is not referenced on the document. As a side note, the re

  • Does anyone here know anything about parental controls?

    Hey guys! I am an incoming college student, so I recently purchased a shiny new Macbook Pro (which I love!). However, i have an issue. My mother is something of a paranoid android, and wants to install some kind of parental controls. While I really d

  • Hooking up a microphone

    Can I use garage band as a go between from my speakers and a microphone? I need to get a wireless microphone and was thinking instead of getting a sound board I cold use garage band. And connect my speakers to the computer. Is this possible? Leroystr

  • How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table

    Hello, How to Implement Sort, Filter funtinality in Normal web dynpro ABAP Table ? Thanks

  • SOA Managed Server cloning and adding it to a cluster.

    Hi, The following is the configuration I have in my machine already. ->Weblogic 10.3 ->Domain : soa_domain ->Contains AdminServer and a soa manged server (soa_server1) I would like to have another managed server (soa_server2) so that I can create a c