MACSEC switch to host not working

Hello,
I am trying to implement macsec only for switch to host segment. I am following below document but still the user is not able to connect.
http://www.cisco.com/c/en/us/support/docs/lan-switching/8021x/117277-config-anyconnect-00.html
The only difference in the topology is below, i have two switches.
Host<-------macsec------->Switch---->Switch---->ISE
The host is repeatedly getting username/password prompts.
Regards,
Akhtar

Do share the configuration policy and log detials

Similar Messages

Windows 8.1 with Hyper-V external switch - 802.1x not working in host nor guest

Hi,
I have Windows 8.1 with installed Hyper-V and virtual machines connected via Hyper-V Switch - External. 802.1x wired authentication is not working in host nor in guest machine (computer is not responding to switch requests). If I will change switch mode
to Internal/Private it will start working.
Do you have any idea how to get it working also in external mode?

Hi,
What is the physical network configuration in your environment? Are you using wireless or wired connection?
We tested this issue as you described here, and the external switch is working fine.
Have you tried to delete the created switches and recreate one, test this issue again?
Yolanda Zhu
TechNet Community Support

Dock not working; command-tab switch between programs not working

The Dock does not work. I have restarted (although the computer will not restart under "Restart", getting stuck at the last part, and needs to be restarted manually). When I change Dock preferences it reverts back to default settings. If I am lucky, the dock will appear and then disappear (poof) without having functioned.
The command tab function for switching between programs stopped working also.
The individual programs work, but I have to go to recent items to switch programs.
Further, I have two Previews open (with different documents in each) even though I have only one Preview program.
A whole lot of bizarre things that may be connected? I would appreciate any help.

You could try removing the .plist file again, but this time, try also removing the com.apple.dock.db file. Then log out and log in again.
Also, it seems as if many people are having similar problems. See [this thread|http://discussions.apple.com/thread.jspa?messageID=9126119].
So, does the problem persist with another user account?
If it were my machine, the next thing I'd try is downloading the combo updater from Apple's website and reinstalling it. 10.5.6 is available [here|http://support.apple.com/downloads/MacOS_X_10-5-6_ComboUpdate].

Please help me my iphone 4 switch off and not working

please help me my iphone switch off and not working

Hello safaabh,
I would be concerned too if my iPhone would not power on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Switch Theme is not working in apex 4.2.Plz help me out.........

Hi.......
Switching from one theme to another theme is not working in apex 4.2..............
Thanx in advance

Hi!
Same problem.
Upgraded from 4.1 -> 4.2.
Change theme from slightly modified Green theme (in mine case 101 is number and original was 11, One level Tabs) to Theme 25 Blue Responsive.
Login page for instance doesn have "Login Region" for instance (not in LOV). And all pages are softly said strange.
All have DISPLAY problem described on "http://1.bp.blogspot.com/-GzseTk6Lpes/UHvJkg9GulI/AAAAAAAAHRQ/Wt406GGZADQ/s640/Screen+Shot+2012-10-15+at+10.25.29.png", but without many parts that Dmitri describe.
Rg
Damir

Screen switch for presentations not working

Embarrassing when you're all hooked up and no-where to go!
Sat down in a meeting to present and the screen switch did not work! Fortunately it came on automatically when I opened PPT.
Good heavens! HP. You can do better than that. FFS

Update, I also have tried the goSerial application as well, and that does the same thing. I have tried the same usb to serial cable on my ubuntu laptop and that is working fine, so I know it's not the cable.
Thanks!

Maverick Local Host Not Working Correctly

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Hello,
I recently upgraded to Maverick 10.9.2. Now my local host is working incorrectly? Now when I try to access one of my sites on my local machine, it just shows the php code and not loading the pages? I also restored httpd.conf~previous to httpd.conf, and still the same issue?
Also
* Web sharing is on
*PHP is enabled
*Mysql is running
Did I mis something?
Thanks JR

Ping to Switch in DMZ not working from Edge Switch

Hi Everyone,
Below is my home Lab setup
Sw1----trunk ----ospf sw2-------direct conenction to ASA------DMZ ------SW3 -------
Switch3 has SVI IP 192.168.69.1
I can ping the IP 169.168.69.1 from sw2 as this has default static route to ASA outside interface IP address.
But i can not ping IP 192.168.69.1 from SW1 need to why ?
is this default behaviour?
On switch 1 i add the static route 192.168.69.0 255.255.255.0 192.168.11.1
Where 192.168.11.1 is interface IP of Sw2 which has direct connection to ASA outside Interface IP ---192.168.11.2.
Also i define Loopback IP 192.167.77.1 on Sw3.
This IP i can ping from Sw1 but IP 192.168.69.1 i can not ping.
I define below static route of Sw1
ip route 192.168.77.0 255.255.255.0 192.168.10.2
where 10.2 is vlan 10 IP on Sw2.
Thanks
Mahesh
Message was edited by: mahesh parmar

Hi jouni,
yesterday i already tried with gateway IP of 192.168.10.2 it did not work then i used 11.1 as gateway same issue.
Today i tried again same thing.
3550SMIA(config)#ip route 192.168.69.0 255.255.255.0 192.168.10.2
3550SMIA(config)#end
3550SMIA#ping 192.168.69.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.69.1, timeout is 2 seconds:
Success rate is 0 percent (0/5)
3550SMIA#
here is sh ip route
3550SMIA# sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route
Gateway of last resort is 192.168.5.3 to network 0.0.0.0
     100.0.0.0/32 is subnetted, 1 subnets
O       100.100.100.100 [110/3] via 192.168.5.3, 5d02h, FastEthernet0/11
     3.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
O       3.3.3.3/32 [110/2] via 192.168.5.3, 5d02h, FastEthernet0/11
C       3.4.4.0/24 is directly connected, Loopback0
C    192.168.30.0/24 is directly connected, Vlan30
     64.0.0.0/32 is subnetted, 1 subnets
O E2    64.59.135.150 [110/300] via 192.168.5.3, 5d02h, FastEthernet0/11
S    192.168.77.0/24 [1/0] via 192.168.10.2
C    192.168.10.0/24 is directly connected, Vlan10
     172.31.0.0/24 is subnetted, 4 subnets
O E2    172.31.3.0 [110/300] via 192.168.5.3, 5d02h, FastEthernet0/11
O E2    172.31.2.0 [110/300] via 192.168.5.3, 5d02h, FastEthernet0/11
O E2    172.31.1.0 [110/300] via 192.168.5.3, 5d02h, FastEthernet0/11
O E2    172.31.0.0 [110/300] via 192.168.5.3, 5d02h, FastEthernet0/11
O    192.168.11.0/24 [110/3] via 192.168.5.3, 5d02h, FastEthernet0/11
O    192.168.98.0/24 [110/2] via 192.168.99.1, 5d02h, FastEthernet0/8
C    192.168.99.0/24 is directly connected, FastEthernet0/8
C    192.168.20.0/24 is directly connected, Vlan20
     192.168.5.0/31 is subnetted, 1 subnets
C       192.168.5.2 is directly connected, FastEthernet0/11
     192.168.6.0/31 is subnetted, 1 subnets
O       192.168.6.2 [110/2] via 192.168.5.3, 5d02h, FastEthernet0/11
S    192.168.69.0/24 [1/0] via 192.168.10.2
O*E2 0.0.0.0/0 [110/1] via 192.168.5.3, 5d02h, FastEthernet0/11
Thanks
MAhesh

Toshiba Portégé R830 wireless On/Off switch (Fn+F8) not working

Hello...
I have posted this on the Wi-Fi troubleshooting forum, but it's not getting any bites.
Just in case anyone has found a solution, here is the link to the original post:
http://forums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Booting-with-Wi-Fi-off/td-p/206448
I work for a large coporation and have purchased hundreds of Toshiba Portégé R830s and Toshiba Tecra R850s and we have installed our corporate image on them (Windows XP) and cannot seem to get be able to turn the wireless card on and off using the the Fn+F8 Key Combination. The light is I've attached an image of all the utilities and what order we are installing them in, after installing these utilities it is still not working. Are there additional utilities we should be installing? The model we have has the Intel Wi-Fi chip (not the Atheros one) in it and we are using the latest Intel Wireless LAN Driver from the Toshiba site (14.0.2.2.1.x32_wCAT) . The Wi-Fi light just stays on all the time and we can connect to a wifi hotspot. But, we would like to be able to turn the wireless on and off with the Fn+F8 Key Combination. If anyone can provide any help with this, it would be greatly appreciated.
Thanks
Attachments:
hotkey.jpg ‏37 KB

just to agree you are not alone with that problem
lots of users including me are complaining in the web!
and it's not only your devices where it is not working.
myself never got a sufficient answer either
http://forums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/R700-Fn-F8-WLan-on-off-nuisance/m-p/185552#M1...
disregard all suggestions to reinstall all software in the 'right order'
whatever that is anyway. its a waste of time.
so I disable it via device manager (despite that the light will stay on!)
shortcut: devmgmt.msc
Toshiba decided to swab from a hardware button to a buggy software switch.
because its ON by default the majority of users do not care/complain.
for that reason Toshiba does not bother to sort that problem properly out
too. they had plenty of time for it already...
regards
Damian

ESW 520 24-Port switch with POE not working???

We just purchased 8 managed switches POE to swap out our existing in preparation for our new phone system. We installed them all after configuring with static IP. Deployed... and all but two work fine. Can someone assist with tips for troubleshooting why two of them do not work? There are a couple other switches in the building. Could it be that a switch "upstream" from the two non-functioning switches is causing an issue? If so, how do I find out? When we put back the two "dumb" switches all was fine. Any tips to help would be much appreciated.

Hi Rachel,
Thank you for posting. You may need to change the Smartport role of the ESW switch port to match what you are connecting to. If you are connecting to another switch, the role should be switch. This is usually what causes the ports to block traffic.

HOST not working on UNIX 9iAS

I am attempting to HOST a command out to the middle tier. When I try this in 9iDS, it works like expected (copy c:\temp\a.txt c:\temp\b.txt). However, when I push the form up to the unix box and attempt to run the same command on the server through the webforms (cp /home/foo/temp/a.txt /home/foo/temp/b.txt), it does not work.
Everything that I have read says that the HOST command runs the command on the middle tier (which is what I want), but something is not right. I have checked the UNIX permissions, tried running the command through a shell file [host('/home/foo/test_copy.sh')], calling it from a shell [host('sh /home/foo/test_copy.sh')] and anything else I can think off. A just will not copy to B. Any ideas on what might be wrong?
Steve "Stump and confused."

HOST are executed with permissions who had start Forms listener.
Check UNIX permissions. Named user can read sourse file and write into target directory. If target file exist then user can write it too.

Linksys SRW2016 switch serial console not working

I have had the switch for about 2 years and recently moved. The manual specifies:
38400 bps and 8-n-1 serial port settings using DB9F to DB9F cable.
I have done this and tried using multiple machines/ports/cables as well as several peices of software (minicom, PuTTy, hyperterminal) and none give me any output from the switch at all.
The trouble is that in its original config, it had 1 port locked into its own VLAN for management with port security and an obscure RFC1918 IP address which I cannot recall for the life of me.
At this point, I have no access to TCP/IP management so serial console is my last hope and is not working.
Any ideas here?

Hi Tobias, after connecting to the console with the forementioned setting, reboot the switch and tap the enter key several times until the screen shows the post process and loading. If there is absolutely nothing loading the switch may be bad.
-Tom
Please mark answered for helpful posts

Trying to switch to SSD, not working at all.

So I have an A1278 Macbook Pro from Late 2011 with a 2.3ghz i5 and 16gb of ram running OSX 10.9. I also have an MCE optibay in place of my disk drive. I use this setup at a recording studio running Logic off my system drive and record to the drive in the optibay so I don't get any "disk too slow" errors or whatever in logic.
Anyway...
I wanted to put my 1TB HDD into my optibay, and put a Samsung 840 EVO 120GB SSD into my main drive bay. First I formatted thr drive to Mac OS Extended (Journaled) in disk utility, then I tried cloning my drive in disk utility to which I got a "disk too small" error and several "invalid argument 22" errors. (Note my 1TB drive only has 90GB's of used space on it) I then tried a fresh install of Mavericks onto the SSD and restoring from a Time Machine backup. No such luck. It would be stuck at 0.2% and then "Time Remaining" would keep rising until it would stop and ask me to restart. Everything up to this point was happening in recovery mode btw. I then tried moving all my old files onto this fresh install on the SSD with Migration assistant. This appeared to have worked. The computer booted and I got this amazing SSD speed everyone was talking about. Until finder continued to close and not function properly over and over and I had to force shutdown. Back into recovery mode I went. Tried to repair disk with disk utility. and I got a "Disk utility can't repair this disk, please back it up and restore" error, and the log showed some red text about invalid node structres. So, did I miss a crucial step that one has to undergo before using an SSD? Some sort of magic SSD button in disk utility that I forgot to toggle? Or do I have a faulty drive? Right now I'm booted using the original 1TB disk in my Optibay. Any thoughts?

Hey Clinton
I guess i'm so stuck with the SSD that i have purchased.
Here is the details:
SSD - Samsung SSD 840 Evo 250GB
MacBook Pro - 13-inch, Mid 2012
Model Identifier: MacBookPro9,2
Processor 2.5 GHz Intel Core i5
Memory 16 GB 1600 MHz DDR3
Graphics Intel HD Graphics 4000 1024 MB
Software OS X 10.9.1 (13B42)
Boot ROM Version: MBP91.00D3.B08
SMC Version (system): 2.2f44
I was running with the factory HDD (toshiba 500gb) and thought of replacing it with an SSD . Tried a clean installation of mavericks at first using Bootable USB drive having mavericks. So i went on and installed the ssd replacing the HDD i had and went on to boot up from the USB, prior the installtion i tired to partition it first with single partition MAC os extended journaled with GUID table. But then it did partition but after that it says trying to reinitialize the drive and it never came back although i tried more than five times. So then i went back to my HDD and tired cloning it to SSD using Carbon Copy Cloner, but even for that i had to do the partitioning which failed. Finally i had to go and return back that peice and they gave me another one convincing me that it might a defective peice.
Now, with the second one, at first i booted up my HDD normally and connected the new SSD the USB/sata converter and i successfully partitioned and using carbon copy cloner, i have cloned as well. Now to make sure if its all ok, before replacing the HDD in the main compartment, i just selected the startup disk as the new SSD and restarted the system... it booted up fine like a cheetah... was all gud... i thought everything is pretty fine. Then ofcourse i went ahead and replaced the HDD and powered up the system again, but then it's not booting up... it gives you that folder with ? mark and that's all...
And then i tried some other ways too... i even checked the firmware versions and i guess they are upto date as well. I just dont get the reason why it's not working.
Please help me.
Anjillan
so should i return and buy crucial now..???

Switch display button not working

Hi I recently installed arch on my HP laptop, and everything is running, exept for my switch display button (Fn+F4).
Before arch, I used to run debian and ubuntu, in both the button worked fine.
Trying a workarond, I could setup my xorg to set the display to an external tv using the nvidia-settings, but the fonts are huge, do anybody knows how to fix it?
Thanks

I installed a newer version of the nvidia driver, now the switch display button is working.

DPM 2012 Backing up a VM on Server 2012 Hyper-V CSV Host - Not Working with Hardware VSS

Hi All,
I'm trying to backup a VM on a 2012 Cluster. I can do it by using the system VSS provider, but when I try to use the hardware provider, (Dell equalogic) it doesn't work. DPM will sit for a while trying and then report a retryable VSS error.
The only error I'm seeing on the Host is the following:
Event ID 12297Volume Shadow Copy Service error: The I/O writes cannot be flushed during the shadow copy creation period on volume \\?\Volume{3312155e-569a-42f3-ab3a-baff892a2681}\. The volume index in the shadow copy set is 0. Error details: Open[0x00000000, The operation completed successfully.
], Flush[0x80042313, The shadow copy provider timed out while flushing data to the volume being shadow copied. This is probably due to excessive activity on the volume. Try again later when the volume is not being used so heavily.
], Release[0x00000000, The operation completed successfully.
], OnRun[0x00000000, The operation completed successfully.
Operation:
Executing Asynchronous Operation
Context:
Current State: DoSnapshotSet
I don't know where to go from here - There is no activity on the CSV (this is the only VM on it, and both the CSV and VM were created specifically for testing this issue
Does anyone have any ideas? I'm desperate.
Update:
Ok, so I can Take DPM out of the picture. Trying to do a snapshot from the Dell Auto-Snapshot manager, I get the same errors. But I also get a bit more information:
Started at 3:02:47 PM
Gathering Information...
Phase 1: Checking pre-requisites... (3:02:47 PM)
Phase 2: Initializing Smart Copy Operation (3:02:47 PM)
Adding components from cluster node SB-BLADE01
Adding components from cluster node SB-BLADE04
Adding components from cluster node SB-BLADE02
Retrieving writer information
Phase 3: Adding Components and Volumes (3:02:52 PM)
Adding components to the Smart Copy Set
Adding volumes to the Smart Copy Set
Phase 4: Creating Smart Copy (3:02:52 PM)
Creating Smart Copy Set
An error occurred:
An error occurred during phase: Creating Smart Copy
Exception from HRESULT: 0x80042313.
Creating Smart Copy Set
An error occurred:
An error occurred during phase: Creating Smart Copy
Exception from HRESULT: 0x80042313.
An error occurred:
Writer 'Microsoft Hyper-V VSS Writer' reported an error: 'VSS_WS_FAILED_AT_FREEZE'. Check the application component to verify it is in a valid state for the operation.
An error occurred:
One or more errors occurred during the operation. Check the detailed progress updates for details.
An error occurred:
Smart Copy creation failed.
Source: Creating Smart Copy Set
An error occurred:
An error occurred during phase: Creating Smart Copy
Exception from HRESULT: 0x80042313.
An error occurred:
Writer 'Microsoft Hyper-V VSS Writer' reported an error: 'VSS_WS_FAILED_AT_FREEZE'. Check the application component to verify it is in a valid state for the operation.
An error occurred:
One or more errors occurred during the operation. Check the detailed progress updates for details.
Error: VSS can no longer flush I/O writes.
Thanks,
John

I had a similar issue with an environment that had previously been working with the Dell HIT configured correctly. As we added a third node to the cluster I began seeing this problem.
In my case I had the HIT volume max sessions per volume at 6 and maximum sessions per volume slice set to 2 and the CSV was using a LUN/Volume on the SAN that was split across 2 members.
When the backup takes place and Dell HIT is configured to use SAN snapshots the vss-control iSCSI target is used which in my case exceeded my limits for maximum connections per volume as I'm using 2 paths per Hyper-V node with MPIO (this is my
current theory).
Once I'd modified these settings I could then back up the VHD's on that CSV again.
Hope this helps.

MACSEC switch to host not working

Similar Messages

Maybe you are looking for