Macupdate Desktop and Techtracker Desktop restart itself on reboot of Mountain Lion
This is a weird problem on my MacBook Pro with Retina display running Mountain Lion.
I have Macpdate Desktop and Techtracker Desktop software on my system to alert me on software padres. boy work fine.
Problem thatI have recently is that even though I have quit both programs after use, and they are not running anymore. When I reboot my Mac, there's two software restart itself.
How can I prevent this to happen? I don't want to disable all software to resume after reboot. Just want to solve prolem with this two software. This is because I I want the Finder window to reopen on my Desktop after reboot.
Any friend here can advise a permanent solution that work?
I have tried to remove files that related to these two software in Saved Applicatin State folder, it help solve the problem on that reboot, but soon, he problem will start again. Not a big issue, bu simpy annoyance.
Advise please and thank in advance.
Hello:
Go to system preferences>users & groups>login items. If those two items are there, delete them.
Barry
Similar Messages
-
Please I just got an iPad 3 and it keeps restarting itself. How do I stop this. Done hard reset and system reset.
iTunes: Restoring iOS software
You will probably need to restore using Recovery Mode.
iPad: Unable to update or restore
Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
HT1688 my phone wont charge and it keeps restarting itself.. why?
my phone does not chrage and it keeps restarting itself. what is the reason behind that?
Best suggestion would be to make an iCloud back up, restore as new and apply the iCloud back up.
Sounds like a software issue. -
Updated the software on my iPhone 4, I try to edit a picture and my phone restarts itself.. Anyone having this problem?
***, a text I tried to send but saved,chops up and pastes in the forum question in my attempt to reach out for a technical resolve of my phone, not my heart. Hahaha.
-
Mail runs fine at first but after awhile it freezes the machine. I have shut the mac down and restart. I am running Mountain Lion which was updated from Leopard. I reinstalled original programs from disk and solved this same problem with Contact. Mail is still a problem. May also include itunes which seems to add to the problem.
Run Disk Utility to check the SMART status of your hard drive.
-
I have OS X 10.5.8 and I want to upgrade, but not to Mountain Lion.
I have OS X 10.5.8 and I want to upgrade, but not to Mountain Lion. How do I upgrade to Leopard or snow leopard?
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I have a early 2011 Macbook pro 13 inch, I'm running Lion 10.7.4, and i want to upgrade to 10.8 Mountain Lion. Is it safe for my computer or are people experiencing problems with displays and Battery life?
Do Not post stuff about how Airplay doesnt work, because i dont have Apple TV and dont need to hear about it.If you have an external drive equal to or larger than your internal HD, clone your internal to it with either Carbon Copy Cloner or Super Duper. Test the clone to make sure it's bootable. Then upgrade either one. Try it out first.
-
I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
I bought my Macbook pro in 2010 and had Snow Leopard which I upgraded when Mountain Lion was available. Now it keeps saying Mavarick is available. Is that another update? Or is that something else?
Mavericks is an upgraded System in the same way that Mountain Lion was, the difference being that it's free. You can download the installer from the Mac App Store (the system requirements are the same as for Mountain Lion so you should be OK there). I've not got it: reports suggest that it is an improvement over Mountain Lion but it has some quirks that may or may not be an issue for you. It has its own forum, so you could look there for information.
-
Itunes store and mac app store keeps quitting automatically on mountain lion
itunes store and mac app store quits automatically with an error message .....
hi, I am the same U :
i'm from a country from the middle east called Palestine, and there is no store for it in the mac app store and i keep trying to buy os x mountain lion from the app store and it keeps saying invalid number can anybody help pease?
Jul 23, 2013 1:14 PM (in response to majsl243)
I think that you know as well as anyone here that there is not yet a legal entity known as the nation of Palestine. There is the Palestinian Territories that are administered currently by the nation of Israel. So if you are going to use the iTunes Store or the Mac App Store, you likely have to use the Israeli Store with a bank card from a local bank with a local billing address. If you cannot supply those bank credentials, then you will likely need to get an iTunes Gift Card for the Israeli Store and buy content that way.
now...
I tried to enter the Apple store to buy some programes, Although I have electronic shopping card, and tried to give it's informations as accurately as possible, but it was rejected because the numbers are not included in the list of their country, so what can i do to solve this problem,because my country Palestine is not included in the list of the country that are known to the store, when i put Israel also it was rejected and I want to buy this store programs -
I use MB pro running Lion OSX 10.7.5 and Now I have bought MB Air with Mountain Lion,Can I transfer my MB Pro stuff running Lion to MB air running Mountain Lion or do I need to buy Mountain Lion for my Pro and create a backup and then transfer ,Although I want Mountain Lion for my MB Pro but can I use the one from MB Air,thnx?
Hello,
If you just do a normal time machine backup on your macbook pro and then plug that harddrive into your new air; you should be able to just use migration assistant to transfer all your files. You wouldnt need to upgrade to mountain lion on your macbook pro.
Hope it helps,
Ryan -
My Mac Mail application is not responding. I open mail and it autimatically freezes. I've reinstalled Mountain Lion 10.8.1. and ran disk utility. What can I do to fix this?
I meant automatically...
-
Hi. i have a imac 5.1 Intel Core 2 Duo i am running 10.6.8 and was wondering if i could upgrade to mountain lion??
Here is a link to the OS X Mountain Lion requirements.
http://www.apple.com/osx/specs/ -
Hi, I just got my new iPod Nano 4th Gen. and the screen is blank... It's not on and its plugged into my Mac OS X Mountain Lion. I don't know what to do. Help!?
If it is plugged into a USB hub (or the spare keyboard port), try connecting it to a direct USB port.
Also, try doing this Reset procedure, while it is connect to power.
http://support.apple.com/kb/HT1320
NOTE: A new iPod nano is 6th gen. -
can anyone recommend a Multi-function black and white laser printer for that works with Mountain Lion?
The MFP can be either 3-in-1 or 4-in-1 i.e with faxI bought an epson xp650 a couple of months ago and cannot fault it. It does everything I require and it is the wifi model so I can print directly from my ipad/iphone. Not sure if you are asking about the colour of the unit or just to be able to print black and white, Obviously all printers will print black and white but just to give you a little more info the printer I bought is the white version and it looks really nice sat next to my imac 27''
Hope this helps.
Maybe you are looking for
-
The operation could not be completed because an item with the name xyz already exists
I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip,
-
VPN Client on Windows 7 64 Bit Enterprise and T410 Very Slow to Load
Hello, I have the 64 bit Client 5.0.0.7.0290 loaded on Thinkpad T410s running Windows 7 64 Bit Enterprise and it takes over an hour for the client to execute. Each step of the client load takes 10-15 minutes to load and although the interface eventu
-
So how do I fix this
-
ITunes 10 for OSX 10.5 only why?
I was so bummed to see yet another major component/function of OS X not available for 10.4.11. Is this a "tech-under-the-hood" thing, or a money thing? I just don't need 10.5/6 and am not going to spend $130 for something I don't need - generally spe
-
Error in smartform table builder
hi all, i created a loop in a amartform builder.every thing is correct. but when i test the smartform it says "component" expected after "BY" i don't understand what is this? plz help me. points will be rewarded if helpful.