Mad squares
Hi
I am editing a HD film using 108050i footage from an external harddrive that in using a 400 fire wire. when rendering the film mad squares seem to appear on some of the footage. These squares do not appear on the original imported footage.
can anyone help as this is driving me mad now
thanks sam
What are "mad squares?" Can you post a screen shot? Also, which of the many types of HD are you working with? HDV?
-DH
Similar Messages
-
Portrait Printing Problem Work-Around
One of the problems that appeared with iCal 2 (I'm using 2.0.2 for this work-around) in Tiger is the inability to print Month and Week views in Portrait mode. iCal automatically rotates the paper to landscape mode, even if you create custom paper sizes opposite to the customary sizes (ie: 11.00" wide by 8.50" tall should print sideways in Portrait mode).
In attempting to outsmart iCal, I created a custom paper size that was "square" - 8.50" x 8.50". Unfortunately, it printed on 8.50" from left to right in Landscape mode, leaving a 2.5" white spot on the right side of the still wrongly oriented paper.
However, on the next attempt to print, with the "square" paper selected, I found that selecting "US Letter" will give you the desired Portrait mode. This works for an size paper, and works with after selecting an custom made "square" paper size.
Here's the step-by-step process:
1. Open any application (other than iCal) with a "Page Setup..." option in the File Menu (Safari works just fine) and select "Page Setup...".
2. Select the "Paper Size" pop-up and choose "Manage Custom Sizes..."
3. Click the "+" button in the bottom left corner to create a new Custom Page Size.
4. Name your new size by double-clicking on "Untitled" and typing. I called my page size "iCal Square".
5. Now set the Page Size to 8.50 Width and 8.50 Height. Any two identical sizes seem to work, and you can use more familiar sizes for non-US papers.
6. Select "OK" to close the Custom Page Sizes dialog, then select "OK" to close the Page Setup dialog.
7. Now open iCal. (Note: If iCal is already open, Quit iCal and open it again. This seems to help the print dialog recognize your new or modified Custom Page Sizes.)
8. Choose "Print..." from the File Menu. Select your new Custom Page Size from the "Paper" pop-up. It should appear at the bottom of the list.
9. Press "Cancel" to close the dialog without printing.
10. Now choose "Print..." again. Your "Paper" selection should be the Custom Page Size you selected ("iCal Square" in my case). Re-selecting US Letter (or your preferred paper size) will give you a Portrait version of the Month or Week view. (Note: If you select Day or List view, it will revert back to Landscape when you re-select Month or Week.)
Since iCal defaults to Month View, this work-around does not work to create Landscape versions of the List and Day views.
Until Apple adds Page Setup back into iCal, this two-step work-around should do the trick.
ErikIt has been pointed out at www.macosxhints.com in response to my post there that you can manually override the iCal settings by navigating to the iCal application, Ctrl/Right-Click and choose Show Package Contents, then navigate to Resources/monthview.aplmodel/Contents/Resources/model.xml/
I would recommend backing up the file before trying anything. But it is possible with TextEdit to simply modify the 2nd line of the file:
<model name="Month" localized-name="Name of the month model" version="0.1" description="View of a full month" source="APLMonthSource" timerange="month" orientation="landscape">
You can change the orientation setting to "portrait" or simply delete the the orientation text and iCal will default to Portrait Mode without my previous workaround.
Again, back-up the file first before you mess around too much. -
I want to get my pink piece (left) to have gradient mesh like the piece on the right (use Mesh Tool)
I dont know how to do. Please help me explain how to do
Thank you!!!!!
My vector file here:
https://www.mediafire.com/?qulqval8ij0ll81Make a copy of your shape and lock it, to use as a template, then direct select and move points, adjusting the shapes to your template by the handles.
In general, for irregular shapes you have better control if you start with a regular one, convert it to a mesh, then reshape to the irregular form. For example, I made square ABCD, then with the Mesh Tool clicked at E, creating a mesh. I laid point A at the upper left point on the template, and moved the others to suitable places, then adjust the handles. Other anchor points can then be added if you need them. -
How to remove/hide 3d object template (start point) when making object transparent
When making 3d object then making it transparent i still see form of witch i made it.
How to remove it?
I made square then from it 3d object and made it round so i could put on it beer botle label BUT when i put latel and then make transperancy full then i still see square from witch object is made.. Its still showing up. Why or better- how to remove it? Cant find any button to click it off.I'm also not so sure I understand what you're trying to do.
If you share an observablecollection then removing an item from that collection would remove it from any ListBox whose itemssource was bound to it.
I get the impression that might not be what you want though.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML
for example：i have 3 listboxs，binding itemssource named list1,list2,list3
in my way
<ListBox Height="138" Margin="58,30,60,0" VerticalAlignment="Top" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ItemContainerStyle="{StaticResource ListBoxItemStyle1}" ItemsSource="{DynamicResource list1}">
</ListBox>
<ListBox Height="138" Margin="58,30,60,0" VerticalAlignment="Top" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ItemContainerStyle="{StaticResource ListBoxItemStyle1}" ItemsSource="{DynamicResource list2}">
</ListBox>
<ListBox Height="138" Margin="58,30,60,0" VerticalAlignment="Top" ScrollViewer.HorizontalScrollBarVisibility="Disabled" ItemContainerStyle="{StaticResource ListBoxItemStyle1}" ItemsSource="{DynamicResource list3}">
</ListBox>
in ListBoxItemStyle1 the method textBlock_MouseDown,i have no way to get the list correctly because the 3 listBox's ItemStyle is the same.if i can get the lists from listboxitem,i can use only one style -
How to restore images in their homothetic proportions?
Probably simple but impossible for me to find out: How can I reset homotheticly the proportions of images that have been stretched or compressed in the layout?
In Golive for instance, images deformed or not at 100% show an icon in the low right corner and you can restore them on a click of a button. Is it possible to do this in InDesign?
>homotheticly: What?
Homothetic transformation: (from Wikipedia.org)
In Euclidean geometry, when not a translation, there is a unique number c by which distances in the dilatation are multiplied. It is called the ratio of magnification or dilation factor or similitude ratio. Such a transformation can be called an enlargement. More generally c can be negative; in that case it not only multiplies all distances by | c | , but also inverts all points with respect to the fixed point.
More simply said, it's the transformation obtained when the length x heith ratio is locked, or when holding "shift" while dragging the corner of the image.
>You want to restore them to 100%?
100% does not restore the initial ratio as far I as could see. If the image has been made square from a rectangle, it will remain square...
>What about the frame? Is that also stretched?
The deformation often comes from using a command such as "fill up the frame", unproportionally. Then if at some stage, one changes his mind and wants to restore the initial proportion, for ex. 1-1.5 for a 24x36mm photo...
>Which version of InDesign are you using?
4.0.5
Thanks! .... -
How to restore images in iMessages iOS 6 .
SSince switching to my 6+ I have noticed that all of my historic images and videos are replaced with placeholders that say img_671.jpeg (as an example). How can I recover these. I never worried about saving them to my camera roll since I knew I could go back and review them.
In Golive for instance, images deformed or not at 100% show an icon in the low right corner and you can restore them on a click of a button. Is it possible to do this in InDesign?
>homotheticly: What?
Homothetic transformation: (from Wikipedia.org)
In Euclidean geometry, when not a translation, there is a unique number c by which distances in the dilatation are multiplied. It is called the ratio of magnification or dilation factor or similitude ratio. Such a transformation can be called an enlargement. More generally c can be negative; in that case it not only multiplies all distances by | c | , but also inverts all points with respect to the fixed point.
More simply said, it's the transformation obtained when the length x heith ratio is locked, or when holding "shift" while dragging the corner of the image.
>You want to restore them to 100%?
100% does not restore the initial ratio as far I as could see. If the image has been made square from a rectangle, it will remain square...
>What about the frame? Is that also stretched?
The deformation often comes from using a command such as "fill up the frame", unproportionally. Then if at some stage, one changes his mind and wants to restore the initial proportion, for ex. 1-1.5 for a 24x36mm photo...
>Which version of InDesign are you using?
4.0.5
Thanks! .... -
Barcode shows a bunch of squares when barcode is made on AI CS11. Does anyone know a fix for this? We have CS2 running on another PC and we don't get this problem.
Background:
Using FrameMaker 7.1 to create a PDF file where a CS11 barcode file is embedded. PDF generates fine but we get a bunch of squares when we copy and paste the barcode data into Notepad.
We have CS 2 running on another PC and we don't get this problem. Do I need to install a plugin (if any) for CS11 to get this to work?
Thanks!Thanks for your feedback. I was not able to mention earlier that in my line of work, we use Notepad to check if the barcode text is written correctly or if the corresponding text can be found if searched in the PDF... We use FREE3OF9.TTF font when entering text values for the barcode (usually in document/part number format exclusive for our company's use) in AI CS11. After saving the AI file, we attach it in a document using FrameMaker 7.1, then a PDF file is created. The output PDF will be a certification sheet for our products. They (our clients) should be able to scan the document/part number out of the barcode. I'm sorry, I could not divulge any other information so I am not sure if this clears out the issue. It used to work before but I had to get my PC formatted and since then I have been encountering this problem. I am trying to figure out if we missed to install a component or something got messed up after re-installing Adobe Illustrator CS11.
-
Help! 10.4.6 made my mouse pointer turn into a little white square :(
i have a dual proc. 450 mhz g4 powermac (gigabit ethernet). the only 'extras' i have put in is a superdrive, a usb2.0 card (for my new ipod) and thats it. it has os 10.4 on it. it had the standard ati rage 128 pro video card in it.
well, i attained a nvidia geforce2 mx card with 64 mb on it. so i decided to put it in the mac. all was fine. well tonight i finally software updated my system which put 10.4.6 on the computer. when restarting i usually saw the black mouse pointer appear in the top left coner as login and all that took place. but now with 10.4.6 i saw a blue square.
now my mouse pointer is a little square of various colors. sometime it is white, which is a pain when a document or webpage is in the background. sometimes is is mutil colored, sometimes pink.
im sure it is something with 10.4.6 and not hardware related. when i start up from a tiger install disc or panther install disc its a normal pointer. but when updating to 10.4.6 the problem occurs.
i want my mouse pointer back
gigabit ehternet powermac g4 Mac OS X (10.4.6)Welcome to Apple Discussions!
Try swapping back in the original graphics card.
If that works, then the graphics card you put in needs a firmware update.
http://www.xlr8yourmac.com/ is the one stop resource I've found for many hardware upgrades for Macs. -
How to find square root, log recursively???
I need to find the square root of a number entered recursively and log as well. Your help would be greatly appreciated. Thanks in advance!
import java.io.*;
/**Class provides recursive versions
* of simple arithmetic operations.
public class Ops2
private static BufferedReader in = null;
/**successor, return n + 1*/
public static int suc(int n)
return n + 1;
/**predecessor, return n - 1*/
public static int pre(int n)
if (n == 0)
return 0;
else
return n - 1;
/**add two numbers entered*/
public static int add(int n, int m)
if (m == 0)
return n;
else
return suc(add(n, pre(m)));
/**subtract two numbers entered*/
public static int sub(int n, int m)
if (n < m)
return 0;
else if (m == 0)
return n;
else
return pre(sub(n, pre(m)));
/**multiply two numbers entered*/
public static int mult(int n, int m)
if (m == 0)
return 0;
else
return add(mult(n, pre(m)), n);
/**divide two numbers entered*/
public static int div(int n, int m)
if (n < m)
return 0;
else
return suc(div(sub(n, m), m));
/**raise first number to second number*/
public static int exp(int n, int m)
if (m == 0)
return 1;
else
return mult(exp(n, pre(m)), n);
/**log of number entered*/
public static int log(int n)
if (n < 2)
return 0;
else
return suc(log(div(n, 2)));
/**square root of number entered*/
public static int sqrt(int n)
if (n == 0)
return 0;
else
return sqrt(div(n, ));
/**remainder of first number entered divided by second number*/
public static int mod(int n, int m)
if (n < m)
return 0;
else
return mod(div(n, pre(m)), m);
public static void prt(String s)
System.out.print(s);
public static void prtln(String s)
System.out.println(s);
public static void main(String [ ] args)
prtln("Welcome to the amazing calculator");
prtln("It can add, multiply and do powers for");
prtln("naturals (including 0). Note that all the");
prtln("HARDWARE does is add 1 or substract 1 to any number!!");
in = new BufferedReader(new InputStreamReader ( System.in ) );
int It;
while ( (It = getOp()) >= 0)
prt("" + It + "\n");
private static int getOp( )
int first, second;
String op;
try
System.out.println( "Enter operation:" );
do
op = in.readLine( );
} while( op.length( ) == 0 );
System.out.println( "Enter first number: " );
first = Integer.parseInt( in.readLine( ) );
System.out.println( "Enter second number: " );
second = Integer.parseInt( in.readLine( ) );
prtln("");
prt(first + " " + op + " " + second + " = ");
switch( op.charAt( 0 ) )
case '+':
return add(first, second);
case '-':
return sub(first, second);
case '*':
return mult(first, second);
case '/':
return div(first, second);
case '^':
return exp(first, second);
case 'v':
return log(first);
case 'q':
return sqrt(first);
case '%':
return mod(first, second);
case 's':
return suc(first);
case 'p':
return pre(first);
default:
System.err.println( "Need +, *, or ^" );
return -1;
catch( IOException e )
System.err.println( e );
return 0;
}Hi,
Is there any one to make a program for me in Turbo
C++ for Dos, which can calculate the square root of
any number without using the sqrt( ) or any ready
made functions.
The program should calculate the s.root of the number
by a formula or procedure defined by the user
(programmer).
Thanks.This is a Java forum!
If you want Java help:
1. Start your own thread.
2. Use code tags (above posting box) if you post code.
3. No one will write the program for you. We will help by answering your questions and giving advice on how to fix problems in code you wrote.
4. The formula you need to implement is given above by dizzy. -
Newtonian square root help! im getting a zero!
Hi guys, this is my first post here, adn I'm taking first level Java. I just recently wrote this code and at first it had 2 errors which i was finally able to debug, and made a clean compile. But now when i run it, it always gives me a zero output. Hope you can enlighten me. I know this code may seem elementary to some here, I'm a newbie, so I hope you guys understand! Thanks! Here's the code...
public class NewtonianSqRoot
public static void main (String[]args)
double num;
//System.out.println("The square root of " + number + " is " + result);
System.out.println("The square root is " + newtonian(num));
System.exit(0);
public static double newtonian(double number)
double nextGuess;
double lastGuess;
double tolerance = 0.0001;
String gradeString = JOptionPane.showInputDialog(null, "Please enter a number, \nthe program exits if the input is zero (0)", "Newtonian Square Root", JOptionPane.QUESTION_MESSAGE);
number = Double.parseDouble(gradeString);
lastGuess = number;
for (int count = 0; count < 20; count++)
nextGuess = ((number / lastGuess) + lastGuess) / 2.0;
if ((number - nextGuess) < tolerance)
return nextGuess;
else
nextGuess = lastGuess;
//System.exit(0);
return nextGuess;
}Hi !
Your logic is wrong.....and your code could definetly give the compiler errors... here is the error free code..
but, you are getting the same number....
import javax.swing.JOptionPane;
public class NewtonianSqRoot
public static void main (String[]args)
double num=0.00;
//System.out.println("The square root of " + number + " is " + result);
System.out.println("The square root is " + newtonian(num));
System.exit(0);
public static double newtonian(double number)
double nextGuess=0.00;
double lastGuess=0.00;
double tolerance = 0.0001;
String gradeString = JOptionPane.showInputDialog(null, "Please enter a number, \nthe program exits if the input is zero (0)", "Newtonian Square Root", JOptionPane.QUESTION_MESSAGE);
number = Double.parseDouble(gradeString);
lastGuess = number;
for (int count = 0; count < 20; count++)
nextGuess = ((number / lastGuess) + lastGuess) / 2.0;
if ((number - nextGuess) < tolerance)
return nextGuess;
else
nextGuess = lastGuess;
//System.exit(0);
return nextGuess;
} -
Square root of an interval using Newton's method
Hello!
I am trying to create a method that calculates the square root of an interval, and I am having trouble with both the actual calculation part, as well as the base case for the recursion. I implemented a simple counter for the recursion, but was not seeing any kind of pattern for the values. (I am pretty sure the "better" values should converge to 0).
I was wondering if anybody wanted to take a swing at it and help me out. :)
Here is the code for my program, followed by the code for Newton's method for calculating square roots of doubles. I am supposed to use it as a reference.
I made the simple arithmetic methods with the help of http://en.wikipedia.org/wiki/Interval_arithmetic . They seem to work fine, so I am having issues with troubleshooting!
Thanks!
public class Interval {
double x1;
double x2;
public Interval(double newx1, double newx2){
x1 = newx1;
x2 = newx2;
public String toString(){
return "[" + this.x1 + ", " + this.x2 + "]";
//Add an interval to the current one.
public Interval add(Interval j){
double tempx1 = this.x1 + j.x1;
double tempx2 = this.x2 + j.x2;
Interval tempInterval = new Interval(tempx1, tempx2);
return tempInterval;
//Subtract an interval from the current one.
public Interval sub(Interval j){
double tempx1 = this.x1 - j.x2;
double tempx2 = this.x2 - j.x1;
Interval tempInterval = new Interval(tempx1, tempx2);
return tempInterval;
//Multiply an interval with the current one.
public Interval mul(Interval j){
double minx1 = Math.min(this.x1*j.x1, this.x2*j.x2);
double minx2 = Math.min(this.x1*j.x2, this.x2*j.x1);
double maxx1 = Math.max(this.x1*j.x1, this.x2*j.x2);
double maxx2 = Math.max(this.x1*j.x2, this.x2*j.x1);
double tempx1 = Math.min(minx1, minx2);
double tempx2 = Math.max(maxx1, maxx2);
Interval tempInterval = new Interval(tempx1, tempx2);
return tempInterval;
//Divide the current interval by a new one.
public Interval div(Interval j){
double minx1 = Math.min(this.x1/j.x1, this.x2/j.x2);
double minx2 = Math.min(this.x1/j.x2, this.x2/j.x1);
double maxx1 = Math.max(this.x1/j.x1, this.x2/j.x2);
double maxx2 = Math.max(this.x1/j.x2, this.x2/j.x1);
double tempx1 = Math.min(minx1, minx2);
double tempx2 = Math.max(maxx1, maxx2);
Interval tempInterval = new Interval(tempx1, tempx2);
return tempInterval;
static Interval step(Interval x, Interval y) {
// Compute a "better" guess than x for the square root of y:
// Code for doubles: Interval better = x - (x*x - y)/(2*x);
Interval two = new Interval(2.0, 2.0);
Interval better = x.sub( ( (x.mul(x)).sub(y) ).div(two.mul(x)) );
// For doubles:
if ( Math.abs(better.x2 - better.x1) < 0.001 ) { // base case
System.out.println(better.toString());
return better;
else {
return step(better, y); // try to get even better...
static Interval sqrt(Interval y) {
return step(y, y); //: start guessing at the square root
public static void main(String args[]){
Interval i = new Interval(4.0, 8.0);
Interval j = new Interval(4.0, 8.0);
Interval addij = i.add(j);
Interval subij = i.sub(j);
Interval mulij = i.mul(j);
Interval divij = i.div(j);
Interval sqrtj = i.sqrt(j);
System.out.println("Intervals:");
System.out.println(i.toString());
System.out.println(j.toString());
System.out.println("Add: " + addij.toString());
System.out.println("Sub: " + subij.toString());
System.out.println("Mul: " + mulij.toString());
System.out.println("Div: " + divij.toString());
System.out.println("Sqrt: " + sqrtj.toString());
}and newton's root finder for doubles:
public class SquareRoot {
static final double ALLOWED_ERROR = 0.001;
* Newton's method for finding square roots.
static double step(double x, double y) {
// Compute a "better" guess than x for the square root of y:
double better = x - (x*x - y)/(2*x);
// Are we close enough?
if ( Math.abs(x - better) < ALLOWED_ERROR ) { // => stop: base case
return better;
else {
return step(better, y); // try to get even better...
static double sqrt(double y) {
return step(y, y); //: start guessing at the square root
public static void main(String[] args) {
System.out.println(Math.sqrt(1234));
System.out.println(sqrt(1234));
// NOTE: you may need to adjust the error bound for these two to agree
}Nathron wrote:
Here is the code for my program, followed by the code for Newton's method for calculating square roots of doubles. I am supposed to use it as a reference.The only thing I can see that looks suspicious is the call to step(better, y) in your reference code.
Are you sure it shouldn't be step(y, better) or step(better, x))? Newton-Rhapson is supposed to be a progressive method, but as far as I can see the value of y can never change with the way you've got it. And if you've copied that to your new code, it might explain the problem.
Winston -
[solved] Wrong display of fonts (all square boxes now)
Hi!
I tried Infinality (https://wiki.archlinux.org/index.php/Fo … Infinality) for font-hinting a few days / weeks ago. Everything worked fine until I recently did - like every day - a
pacman -Syu
since that update my Fonts are all Squares now. Only the real standard fonts (e.g. Bitstream Vera Sans) are displayed correctly now.
Uploaded with ImageShack.us also tried already a
# pacman -S --asdeps freetype2 libxft cairo fontconfig
and I refreshed my font cache via
$ fc-cache -vf
I even followed the described command
pango-querymodules > '/etc/pango/pango.modules'
in https://bbs.archlinux.org/viewtopic.php?id=51316.
But none of the above mentioned worked. Would someone please be so kind and help me out?
UPDATE: Meanwhile I tried a
# pacman -Rscn gnome
and reinstalled gnome & gnome-extra. But this doesn't work either, fonts like 'Verdana' aren't displayed correctly.
UPDATE 2: After deleting my manual installed Windows 7 fonts and reloading the cache everything works fine now. I don't know why, but it works
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --
-- edit:Picture changed to thumbnail - sorry! --
Last edited by chiffre (2011-05-14 17:33:18)hacosta wrote:I highly doubt reinstalling gnome would actually do anything, since blackbox is not affected, have you tried just choosing another font in gnome's font thing
I fixed this by uninstalling gnome, all config files for pkg's removed, their dependencies, and all packages that depend on those - with the following command
pacman -Rscn gnome
This removed A LOT of packages. Then I had to reinstall gnome and my fonts were once again readable.
Before anyone tells me how stupid I was for doing that, or how there may have been a simpler theoritical solution - realize that I use my computer for work daily. I had made a few posts and wasn't getting the help I needed so I had to figure something out. I tried removing gnome and all it's packages without the '-n' option (config files), but that didn't work. So I reloaded gnome, then retried with the '-n' option and that did work.
I googled this and apparently many other people had this problem with gnome (not Arch-specific), but nobody gave any workable solutions to any of them either. Hopefully someone smarter than me can comment on the true cause of this, and maybe deduce a better solution - as I am sure some other poor sap will run into the same problem and surely come across this thread.
I appreciate everyone's input on this, and hopefully someone will chime in here with a much simpler solution that wont cause as much trouble as it did for me.
cheers. -
Weird/strange idea. I want to sync 3 ipads with a mac, to display a count of things being made.
My church is doing something called Operation Christmas Child. It’s a big service opportunity where anyone can come and pack a shoebox full of toys to be sent around the world for poor kids to get toys at Christmas. My church is doing a big shoebox packing party, where we are hoping to have about a thousand shoeboxes and tons of toys/school supplies/games/etc to fill them with.
I wanted to display the number of shoeboxes we have packed on a projector as we go. I’m wondering if there are any apps that would count the number of shoeboxes we make as we go.
Our setup is this: we have a Mac hooked up to a sound system and a big projector in our gym/worship area. It has ProPresenter5 on it which we use to display music lyrics, videos, etc. We are going to have three 50ft long tables in the gym that people will be walking along packing their boxes. At the end of these, we were thinking about having people with iPads to give people the option to donate a $7 fee to pay for shipping for their box(es). We thought about using a credit card app like Square, PayPal, or I was kinda leaning towards Intuit-GoPayment to take these donations. In a perfect world, I would be able to have three iPads, one at each table, that as people paid the fee or finished making their box, the iPad would sync/connect to our Mac, which would count that box, and display the total number of boxes made on the projector. I wouldn’t mind if that meant the person running the iPad (or even a laptop if that would work better?) had to push a button to count that box as they saw it finished, but I really want to have the multiple iPads or laptops to be able to send that information to one spot for a total count, specifically, our Mac that could display the total count.
Are there any apps/programs for the Mac that I could buy/download to make this happen? Is there anything in ProPresenter that anyone knows about that could perform this?
Any other ideas how to make this work?
I tried really hard to make this make sense, but it’s a confusing/strange idea. Please let me know if you have questions about what I’m wanting.
Much thanks!
DanUse a different IMAP (mail) account as described here:
http://support.apple.com/kb/HT4191 -
Missing Plug-In and Getting Blue Squares with Question Mark
I am on a brand new pc, 64-bit Windows 7, all programs downloaded in the last week. I have used safari for years on my mac and want to keep using it on the pc but video and images are not displaying. For video content it says "missing plug-in" but doesn't tell me what plug-in I need. Some images do not display and I get the blue square with a question mark.
I downloaded a plug-in from apple but it seems to be for Firefox. I installed the 64-bit beta Flash player and it didn't help. The next site I tried to access told me I needed the Flash player so I tried downloading the regular Flash player even though I knew it wouldn't work. It didn't download and seems to have taken the beta with it, wherever it went (have searched computer). Things that don't display in safari work just fine when I switch to Chrome.
I have the latest version of Quicktime which came with iTunes. I messed with some of the default program settings, trying to get QuickTime to take over whenever possible but it doesn't seem to have made any difference.
On my mac I had used Flip4Mac to take care of similar issues. I didn't think I would have similar problems on the pc. Help anyone?Blue box with a question mark means that images are not available now.
Servers storing those images may be down.
Best. -
When I hit "save as" and view the field that comes up, it does not give me the option any longer of saving to my personal file. This problem started a few days ago, when it took me into my personal files and allowed me to select a specific folder to save the document in, but no longer gave me the option of hitting "save" into that file folder. I know that I have made changes in trying to correct the original problem, but now I don't know how to get back to where I was before.no longer
Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love
Maybe you are looking for
-
How can i properly regain Time Machine HD Space
i goofed somewhere My time machine exeternal drive is full So i spent ONE HOUR deletely backups,Only keeping Oct 31,Nov 30 and Today so i could regain space for new backups The Time Machine read 111.79GB,45.39GB FREE before i started and reads the sa
-
Why do i have to RENDER a multi-clip in my timeline? but not reg clips?
don't recall that i've ever had to render a multiclip before in the timeline with no filters, etc... these are just standard multiclips. i'm in FCP 6 by the way.
-
Is there any way to go back to prvious version of software befoe 1.1 on ipod nano 6th generation. After update it switches off all the time after about 10 secs and I preferred it when I could listen to songs when in sleep mode without using too much
-
Can you exchange a new iPod Touch 4G 32 gb for the new one when it comes out?
I ordered one using points from my credit card, so I want to know if I can I exchange it for the 5 when it comes out??
-
Setup first Exchange 2013 with mixed mode exchange 2007/2010
my company has exchange 2007 hub and edge and exchange 2010. I'm planning to retire all exchange 2007 first follow migrate to exchange 2013. so I have few questions as below ? 1. Do I need to unsubscribe hub 2007 from edge first before uninstall ? Cu