Madden 08 Online and Linksys Wireless....??

Could someone give me a link, or leave me steps which would tell me how to set up my Linksys Wireless Internet router to be able to play Madden through a Playstation 2 system?

hi... are you able to go online using the Linksys wireless router?? if yes... logon to the router's setup page...open I.E. and in the address bar type 192.168.1.1, it would ask for username and password... put "admin" (default password) as password without any username...click on the "applications & gaming" >> port triggering and try triggering 6000-6999 and 10070-10080 ports...also try reducing the MTU values to 1365 on the router...check whether it works or not...
if it still doesn't work out let me know the model and the version no. of the router and the ISP details...

Similar Messages

Issues with Deskjet 5650 and Linksys wireless print server.

I have a iMac DP 1.8, a iMac G3 700 mhz running Tiger and a Toshiba laptop running XP and I am on a wireless network. I use a Linksys WRT54G router for the wireless and I am using a Linksys WPS54G wireless printserver to connect an HP Deskjet 5650 to the network. This was all working fine for the past 2 months until Monday evening when the Mac's lost connection to the printer. However the Toshiba can print to it just fine.
I cannot for the life of me figure out what happened. The iMac DP recently had a security update for intel installed this past Monday, but no updates have been installed on the G3 iMac. I have contacted Apple, HP and Linksys and they have been no help at all. Apple says it's a Linksys issue, Linksys says it's Apple issue and HP is just cluless. I would appreciate any assistance offered.
Thanks
iMac DP 1.8, iMac G3 700mhz Mac OS X (10.4.5) Linksys wireless router WRT54G, Linksys wireless printeserver WPS54G

Paul, I am amazed you were ever able to print via the Linksys wireless server on your mac. I have the identical router and print server, and only the Windows PC's on my wireless network have been able to share the printer on that wireless server. I've been unable to find a driver for my iMac, and could never get the iMac to find the server. Finally gave up and bought an HP 2600n color laser and connected it directly to the iMac via USB. You're right about lack of help from Linksys. There is an Apple folder under "unsupported" on the print server installation CD, but there's nothing helpful in there.
iMac (Intel) Mac OS X (10.4.5)
iMac (Intel) Mac OS X (10.4.5)

AAA configuration and Linksys Wireless Access Point

Hi,
Can we authenticate Linksys Wireless Access Point thru ACS TACACS+ or RADIUS ? If yes , please tell me the config steps.
Thnaks .
Anil K.

Hi,
Can we authenticate Linksys Wireless Access Point thru ACS TACACS+ or RADIUS ? If yes , please tell me the config steps.
Thnaks .
Anil K.
Check out the below link for Linksys with Radius server authentication:-
http://forevergeeks.com/setup-linksys-router-with-radius-server-authentication-2
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

What are the differences between aiport extreme and linksys wireless router

We currently have an apple macbook connecting to the internet via a linksys router. We are considering an airport extreme wireless router, we are considering the cost. What are the advantages of purchasing an Airport Extreme router.... ??? Currently my wireless access appears to be more than adequate.

ellis911 wrote:
What are the advantages of purchasing an Airport Extreme router.... ??
Besides Bob Timmons' comments, an AirPort Extreme supports these things, which your Linksys router may or may not support:
- A USB-connected networked disk drive
- A USB-connected printer that can be shared by all computers on your network
- MobileMe access to your local resources from outside your local network
- Configuration via a dedicated program, rather than via a browser interface
If none of these interests you or if any that interest you are already offered by your current router, and if you're happy with your Linksys router, then I'd keep the Linksys router.

Vista-64 and Linksys Wireless Print Server to cp1215

I have Vista-64 OS
I have a HP CP1215 Color Laserjet USB attached to a Wireless Linksys Print Server (WPSM54G).
HP website shows 2 different drivers for this printer for Vista-64:
1. Print Driver Package
2. PNP Print Driver Package
My question is, which should I be installing? The Printer is USB attached to the Print Server, but I'm printing wirelessly to the print server. So, not sure which of the two is the correct one to install.

It is probably a driver issue.
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.
Though for 10.3, this guide may also help.
Printing to a network ethernet printer (which has an IP address) from a Mac running OS 10.3.x
http://www.ifelix.co.uk/tech/3005.html
iFelix

New AE and Linksys wireless cameras (in over my head?)

I had a linksys wap and no issues opening ports for the external DDNS service to view the linksys camera outside of the network/via any internet connection.
now, on the AE, how do i open a port (1012) to allow the external DDNS service to see that device (it is on a static IP address).
I have no issue viewing the camera through the wirless network when on/in the local network - it's the port opening to the outside world... how do i set it up???

You'll need to forward port 1012 to the static IP that you have. Do that by going through Airport Utility/Manual Setup/Advanced/Port Mapping. See this as an example:
http://support.apple.com/kb/TA24799

Mac and Linksys Wireless Print Server

I have a wireless print server connected to an HP 940C that I cannot get my iMac to print to. It finds it on the network, but is not printing. Any ideas??

It is probably a driver issue.
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.
Though for 10.3, this guide may also help.
Printing to a network ethernet printer (which has an IP address) from a Mac running OS 10.3.x
http://www.ifelix.co.uk/tech/3005.html
iFelix

Re: NCF and Linksys Wireless LAN

I have tried this on three computers. All are Compaq. Two are
running Windows XP professional and the other has Windows XP home.
All are at Service Pack 1. Novell Client is used on all. Version
4.90 Service Pack 1.
>
>What Win and SP versions are you on?
>
>Scott Jones
>Product Line Manager
>Nsure Secure Access

Just to let anyone know - now replaced all phones with 1721 phones

Lost IP access to Linksys wireless router WRT54GS v.4. How to restore?

Apologies for the long post and multiple questions. If you can answer at least one of them, I will be appreciative!
While attempting to set-up wireless networking between my new Westell Model 6100G and Linksys wireless router WRT54GS v.4 (with most recent upgraded firmware), I lost access to the Linksys. When I hooked up the Linksys again via Ethernet to my XP PC with the modem no longer connected, I was unable to access it via IP 192.168.1.1. All I get is a blank web browser page (with the usual “diagnose, etc.” button). I assumed this is because the IP address conflicts with IP for the Westell, but I am also concerned if it is hardware failure. I have tried resetting the router, but no luck. I have tried ipconfig /all which gave me a different ip address. But when I tried to access the Linksys using this ip address, I was unsuccessful. I hooked up the router to a different pc with no present Internet access and tried IP 192.168.1.1, but still no luck. Trying the IP I got from ipconfig /all at this new pc failed as well.
Is there a chance I have a hardware failure? I had access last night when the linksys was at its original location (I only checked it once before turning in), but I seem to have lost access ever since I moved it closer to my desk and to a new electrical outlet. When turned on, the Linksys has green lights in the right places, so it looks fine, but, again, no access via IP.
If it’s not hardware failure, how do I find out what IP address the Linksys actually uses now if it is no longer 192.168.1.1? Or how do I change it?
Is a WRT54GS v.4 worth the trouble or should I start over and upgrade to a newer router?
Is Linksys the best choice with the Westell 6100G? The configuration procedures seem very complicated compared to my ease of router/modem configuring in the past.
Solved!
Go to Solution.

"_when I setup the Westell modem in bridge mode, will I lose my Internet connection?_ "
Answering my own question: "yes."
I found what looks like a good step-by-step guide to hooking up a Westell 6100 to a Linksys
router at:
http://www.dslreports.com/faq/vz/4._Hardware#13600
It provides more detail and up-to-date illustrations than Verizon's instructions at
https://www22.verizon.com/ResidentialHelp/HighSpeed/Networking/SetUp/QuestionsOne/87126.htm
(which appear to be for an earlier version of the Westell 6100), although they are otherwise similar. The DSLreports faq confirms that Internet and IP access to the modem will be lost during the setup phase. For a "newbie" at such linking, this bit of information is very helpful!
Thank you, Telcoguru, for confirming that I should have followed the instructions exactly from beginning to end before becoming concerned and skipping steps.
I will close this thread and wait for a long lazy day, to try linking the Westell and the Linksys again. If I need to post again, it will hopefully be with more specific questions about specific steps that haven't worked as they should.

HP AIO Remote shows wireless printer offline when it is online and can print to it.

HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly. How can I get it to recognize my wireless printer is online wirelessly? AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.

Hi rpmcintyre,
Thank you for the additional information. I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
I have two different documents for you. The first one is How to Use the HP AiO Remote App for Windows 8. It has a FAQ section at the bottom of the document with trouble shooting steps. I have also included the Supported Printers for the HP Scan and Capture App.
If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Sharing Linksys Wireless Print Server with MAC and PC - How to do?

I have lost the capability to share a printer on my network by using the Linksys Wireless Print Server-model number WPS54G -V2. Prior to having to return my previous Print Server on an RMA, I was able to use the MAC and PCs on my network. I have a PowerGook G4 with MacOS X 10.4.10. I also have a Airport Extreme Base Station V5.6. The printer on the network that is being shared is an Epson Stylus Photo 820. Recently, when trying to reconfigure the network, I updated the software on the Airport Extreme...so I think after that, I am no longer able to share this printer using current network configuration. As information, I will share how I got the network to share the printer BEFORE I had to replace the previous Print Server and BEFORE I updated the Airport Extreme. Please see this link:
http://www.macosxhints.com/article.php?story=20050406151311940
Even though this was for a different type of Print Server, this worked for me.
When reconfiguring the new Print Server, I contacted Linksys...as had some difficulty until I found out how to assign a static IP to the new Print Server. When trying to talk to them about the Mac issue, and sharing the printer, they shared this link with me...which may be helpful to some, but I found that this does not work for me...
http://www.macosxhints.com/article.php?story=20060404021600193
I have been trying to work through the issue, but feel I may now have some compatibility issues between the Airport Extreme and the Epson printer.
Further details are that I use 10.0.1.78 for the assigned IP address for the Print server. My router (which is the Airport address) is 10.0.1.1. I have tried IPP printing option, LPD printing option...and IPP printing at least returns a status on the Print Server as "printing" as opposed to "idle". I have checked the Print status on the Mac, and I have received two (2) different error messages as to why the print job failed. They are:
"the process "picwpstops" stopped unexpectedly with status 1"
and
"the process "rastertoprinter" stopped unexpectedly with status 1"
The latter happens when I follow the instructions on the second link I attached on this topic...with the only change being that I select IPP printing as opposed to LPD printing.
Anyone that has any insight into HOW to configure the mysterious settings for Mac OS printing so that it can be compatible with a Wireless Print Server, please feel free to comment. In the meantime, I am thinking that the links above could help some people...just not me at this point given my current configuration and versions of software/firmware and perhaps the printer I am using.
Greatly appreciate your consideration, and any suggestions to anyone that might understand what these error messages mean when checking the printer status after sending a file for printing.
Thank you

1. No, you don't have to make a bootable clone.
2. If you use the drive for a bootable backup, then you cannot use the drive for other types of storage unless you partition the drive and make more than one volume.
3. No, it will not try to boot the computer. You must designate the startup volume using Startup Disk preferences.
If you wish to use the drive on both a Mac and a PC, then either you make two partitions - one for Mac and the other for the PC or you must format the entire drive using FAT32 so the drive can be used for read//write by both operating systems. If you do this then you cannot use the drive for a bootable backup nor can you use it with Time Machine.
FAT32 is slower for read/write on the Mac than using Mac formatting.
Optimally, I would suggest you partition the drive into two volumes. One volume formatted for the Mac and the other formatted FAT32.
You can send files from a PC to a Mac and vice-versa using File Sharing. Select Mac Help from the Finder's Help menu and search for "file sharing" or "sharing" to find help articles. Also see,
Mac OS X 10.5 Help- Setting up a Mac computer to share files with Windows users
Mac OS X 10.5 Help- Setting up a Windows computer to share files with Mac users
Mac OS X 10.5 Help- Sharing with Windows computers

Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access? Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

Thanks for the help. Looked but not clear on what I am trying to do as being possible. Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it?
I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located. Would prefer to replace Linksys with all Apple, but just not possible financially yet. Thanks for the help.

If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

Linksys Wireless Print server and my Mac G4

I just set up my linksys wireless print server and it's printing from my PC just fine - not so on my G4. My printer is a Canon Pixma ip5200, and the appropriate drivers etc are installed.
I know the IP address and have tried setting up the printer via IPP (and pinged it from the mac successfully). Just no success printing. The printer utility looks like it is printing to the printer but nothing comes out.
Any ideas?

You won't be able to get this to work.
The Canon printer drivers won't allow you to connect to and print to a Canon printer attached to a wireless print server.
There is no solution, there is no way that this can work
You have three solutions.
Replace the Canon printer with another printer for which the drivers will work.
Replace the Canon printer with a networked Canon printer such as the iP4000r (or any other network printer) in which case you won't need the print server
Connect the Canon printer directly via USB to the computer to print.
iFelix

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly. The wireless light is blinking green very quickly and I connect and disconnect from the network constantly. How do I get the router to work properly

Hello James,
The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
Hope this helps,
Thanks
Vijay

Can I wipe out newer OS on ibook G4 and restore with OS 9 or 8 or even 7 so that I can run the hundreds of Educational CDs we still have at our school? We do not need to go online or be wireless or install any newer programs.

Can I wipe out newer OS on ibook G4 and restore with OS 9 or 8 or even 7 so that I can run the hundreds of Educational CDs we still have at our school? We do not need to go online or be wireless or install any newer programs.

Look on the outside of the case to see if it has a port with a symbol similar to a Y, or compare its specifications against those of the first two computers on this list.
(64597)

Madden 08 Online and Linksys Wireless....??

Similar Messages

Maybe you are looking for