Made a soundclip of my audio crackling... does it do it for you?

http://s64.yousendit.com/d.aspx?id=NIVMB82HZWAXW5E9JXXYEXP
Anyone?

Its from my rythem voices cds emotional bought it from hmv , out of all the tracks
that was the worst one... i have tested the cd in cdplayer and on another computer
it plays fine i also reconverted it on another computer again plays fine. But that
is the crackling what not i get with different types of music

Similar Messages

Is anyone using NETGEAR Push2TV with a MacBook Pro and AirPort Extreme and does it work well for you?

I am interested in buying a NETGEAR Push2TV display TV streamer to use with my MacBook Pro and AirPort Extreme.
I saw on the Netgear site that a Intel Wireless Display/WIFI driver software is required for PC's; do we have this software installed already on our MacBook Pro's? Is any one using this box and does it work well for you, any problems or setup issues?

trying to find out same thing , store said works with new intel processor, My mini dont finding.....

How quickly does photo stream sync for you?

how quickly does photo stream sync for you?

I have seen some posts floating about here complaining that photos don't or at least don't immediately sync to all devices. I think a small number of these people may not realise that syncing requires wifi and not 3G, one must also remember this community is like a doctors surgery, it is where people come if they have aches and pains.

Does this forum suck for you too?

I don't mean the content. I find these Flash forums very
useful and helpful. It's the performance of the actual forum site
that makes me increasingly want to avoid this place. Click any
thread and it may or may not load, and when it does (often on the
3rd or 4th attempt) it takes between 30 and 90 seconds to load. I
note that many newcomers to this forum post the identical messages
3 or 4 times, probably because the molasses-slow performance makes
them worry their message didn't get posted. Am I the only one this
is happening to? If not, has it gotten gradually worse and worse
for you over the past couple weeks?
It's very frustrating because I enjoy learning and
contributing to the discussions here. I just want to find out if
it's a problem for me alone.
I'm using latest IE and Firefox on a clear, unshared 6MB
broadband connection. No problems with any other forums on the web,
just this one.

I have noticed that the forum (and only this one for me) has
been increasingly slow in the last day or two. Looks like it is
time for them to do some pruning, heh. And as it seems, something
seems to keep refreshing on this forum bout every 15 secs or so. If
it is not just me, then that might be contributing to the problem.
Anyways, back to hoping for an answer to the question I posted.
And, btw, personally I stay away from using email clients for
just about anything but an intranet, due to a large portion of
viruses dedicated to mail clients....specially Microsoft made
ones.

Vinagre vnc client -- does the scaling work for you?

hello fellaz,
i tried vinagre from aur (both vinagre and vinagre-tweak) but scaling option was disabled, although i think it should work (gtk-vnc has been compiled with --with-gtkglext=yes). does it work for you?
thanks for reply,
joe
Last edited by jose1711 (2008-04-26 11:35:29)

my self-built packages don't work with scaling aswell.
however, vinagre should be in extra anyway, as it is officially part of gnome 2.22, so it should be in gnome-extra.

Does BT Openzone work for you?

I live in Central London and work in the City so I often find that my iPhone has connected to BT Openzone or The Cloud if WiFi is on.
The reason I usually discover this is that it is taking an age to download something or to move to the next page in Safari. I usually have to switch off WiFi in order to get the much faster connection I can get in 3G.
There is Cloud WiFi at Arsenal's Emirates Stadium and that appears occasionally on the phone but I can never get any downloads during a match via Cloud or 3G.
All in all, it seems to me that the public wi-fi connection to the iPhone is useless and the only useful such connection is a personal/corporate one.
What are other people's experiences? Am I doing something wrong?

dbir wrote:
Has anyone been able to get "DVR Manager" (go to Verizon's web site>My Verizon>Manage My TV, scroll down to "DVR Manager", click "Manage") to work? I always get the error" "We are having trouble communicating to your Set Top Box.".
I just had FIOS installed (TV, internet, phone) last week. Everything is working great. Except this. I've researched/tried lots of things unsuccessfully. "Home Agent" doesn't know DVR Manager exists. Neither does the online Automated Agent. I tried Verizon's online chat help, but their suggestions didn't help either. I'm wondering if it works for anyone, or is it some discontinued-but-still-advertised feature.
If DVR Manager works for you, please tell me what you did to get it to work.
-dbir
Yes, has worked for years. And while I don't use it very much, I just checked, still works fine.
Have you gone into the Menu on the DVR and set up the FiOS TV Remote DVR dialog? If not, you need to do so. You will need to set up a Parental Control PIN to access the dialog if you have not done so.
Menu ==> Settings ==> FiOS TV Remote DVR ==> Web Access ==> and enable it (at least that is what I remember you had to do at that point)
Hope this helps.
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 (VHO 1)

For people with an unlimited data plan...does it slow down for you after 2GB?

Ive had my unlimited data plan since i joined AT&T back in 2008 when i bought the iPhone 3G...ive been able to keep it for my current iPhone 4 and now ill be upgrading to iPhone 5 and was wondering if anyone else with an unlimited data plans suffers slowing down of data after 2GB? it mite b more than 2GB but it def does slow down...will this continue to happen or it is it just me?

AT&T's policy explained - http://www.att.com/esupport/datausage.jsp?source=IZDUel1160000000U
Click the "what you need to know". If you exceed 3GB you will be throttled, and you should receive a text message about it the first time you go over.

Does LIBGL_ALWAYS_INDIRECT still work for you?

Those of you who have AIGLX-capable video hardware: can you still force accelerated indirect rendering for OpenGL stuff, using LIBGL_ALWAYS_INDIRECT=1, without X freezing solid? Or does LIBGL_ALWAYS_INDIRECT cause a lockup?

Hmm, so this might be a little late to ask but I never really understood what actually happens when the driver detects AIGLX capable hardware and displays somehting like this in Xorg.0.log:
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
Does it use AIGLX or the regular DRI preferably? What about these btw:
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r200_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
Sorry, also want to ask someone before I go diggin in myself once.
Most importantly, yes LIBGL_ALWAYS_INDIRECT=1does still affects the Xserver. It is switching to indirect rendering as glxinfo suggests while most OpenGL apps such as neverball run just fine still. Sorry, didn't try beryl or anything heh. This is on a mac though using archppc, similar setup what goes for versions though.

How does time machine work for you ?

TimeMacine writes two files per time block and sometimes one like it should.
When I look over drive with Finder it seems okay to me. The plist telling
it which files are not included seems okay. The killer when I try to see what
could be restored TimeMachine silently fails to open.

Do you mean the "Star Wars" display won't appear? If so, see #E4 in Time Machine - Troubleshooting.
If not, please clarify.

How does After Effects work for you guys?

Love to hear feedback!

After Effects has been a stable and fabuously fun, ultimatley indispensible and valuable application on all of my Macintoshes since After Effects was called CoSA.
If you're looking for complaints, try asking, "What will not work for me in After Effects?" But that will depend on your hardware and your ability to learn this unbelievably deep and complex application.

Does my applet work for you?

I can see it fine on my PC but nobody else can view it.
http://www.info.com.ph/~arivera/game/testmain.html
I'm using SDK 1.4.2

I'm trying to learn how to use
MediaTracker right now - having some kind of problem
where I try and wait for all the images to load but it
would still run without having loaded everything.
I usually just use a boolean status, and while the "loaded" boolean is false, I dont even let the other game code run. Quick example:
import java.applet.*;
import java.awt.*;
public class Example extends Applet implements Runnable {
     Image buffer,images[];
     int w,h;
     boolean loaded;
     public void init() {
          loaded = false;
          w = getSize().width;
          h = getSize().height;
          buffer = createImage(w,h);
          new Thread(this).start();
     public void run() {
          while (true) {
               if (!loaded) { // not loaded?
                    loaded = load(); // try to load the images
               else {
                    // game processing
               Graphics g = buffer.getGraphics();
               if (g != null) paint(g); // try an active render
               else repaint(); // passive rend if active fails
               try {
                    Thread.sleep(10);
               catch (InterruptedException e) {
                    break;
     /* you should use a boolean loader so you can know
     * if the load fails or not */
     protected boolean load() {
          images = new Image[] { // images to load
               getImage("sprite.gif"),
               getImage("background.gif"),
               getImage("level.gif"),
               getImage("whatever.gif")
          MediaTracker m = new MediaTracker(this);
          for (int j = 0;j < images.length;j++) {
               m.addImage(images[j],j);
          try {
               m.waitForAll();
          catch (InterruptedException e) {
               return false; // there was an error, load failed
          /* the final step is to return whether or not MediaTracker didnt have a problem */
          return !m.isErrorAny(); // hopefully will return true
     protected Image getImage(String s) {
          return getImage(getCodeBase(),s);
     public void paint(Graphics g) {
          Graphics gfx = buffer.getGraphics();
          if (!loaded) {
               gfx.setColor(Color.black);
               gfx.fillRect(0,0,w,h);
               gfx.setColor(Color.white);
               gfx.drawString("Loading...",10,10);
          else {
               // game painting
          g.drawImage(buffer,0,0,null);
     public void update(Graphics g) {
          paint(g);
The music I haven't gone around trying to fix yet. You
can turn off the music by painstakingly closing all
browser windows though.
public void stop() {
    sound.stop();
I think the applet works if you have JRE 1.4 or above.
My friends can't seem to view it - so I'll put a note
on the webpage saying it requires JRE 1.4 or above.Well if you're sure you're using methods and classes that are available to previous versions of JRE, you can use the -target attribute to fix that problem. Like if you wanted JRE 1.2 and higher to run the applet instead of just 1.4, you'd compile:
javac -target 1.2 file.javaBy default JDK1.4 will compile it so only JRE1.4+ can view it (which means you'd need the plugin).

Does font-replacement work for you?

To set up this test:
1) Disable the MarkerFelt-Thin and GillSans fonts.
2) Start a new keynote, and choose a theme (I used 'gradient' but the rest have the same problem). You get an error that the fonts are missing.
3) Go to the master slides and change them to some font that you have. A simple Ctrl+a and font reassignment should do it. If you're on a bullet, make sure the bullet is not also GIllSans or MarkerFelt.
4) Save and close. Reopen.
PROBLEM: The fonts are still reported as missing, even though you assigned new fonts to the slides. You can go back over and over, and Keynote still says they are missing.

Are you changing the font defaults for the text element and shapes as well?
Keynote (and Pages) will allow you to set the fonts for spaes (as well as the color/texture) and it will also have a setting for the text you can place on the slide (which is not part of the normal body or title text)
Gerry
You can save yourself some trouble on this project by deleting all but one master slide to do your testing on. Much easier than changing it on ever single slide, at least for a test.
Message was edited by: Gerry Straathof

NiBiTor 2.0: It now does the temperature mod for you...

http://www.mvktech.net/index.php?option=com_remository&Itemid=26&func=download&filecatid=916
(You still need to do the BIOS flash though)
(Change any 450 you see to 500 and tick the option to enable temp monitoring)

I upgraded my BIOS to 1.6 and started installing my software. The software warned me that my CPU was over 80C and I saw it climb to 87C.
Could this be right? I have the BIOS set at FAST and the software says 3.04 for my 3.0 GHz P4.
I'm pretty sure I installed the HSF correctly and also have two other fans. One on the side of the case and the other in the rear. Although, the rear fan seems to be blocked by the case because the holes are not very big.
Any thoughts?
Thanks,
Andrew

How long does it usually take for you to fully charge your iPad 2?

My iPad takes forever to reach a full 100%. The fast charge cycle or whatever it is called only takes about 2-3 hours and it reaches 80% quickly. From 80% to 100% is a crawl and it can sometimes take 4 very long hours!
Anybody else facing such issues? Any fixes? I usually let my iPad 2 run out of battery or reach 5% levels before putting it to charge. Is this why it is happening? I know people advise to recharge when the battery reaches 30% levels but then what is the point of never using 30% of your battery's capacity???
Any thoughts, anyone?

Directly from Apple: https://www.apple.com/batteries/why-lithium-ion/
Your Apple lithium-ion battery uses fast charging to quickly reach 80% of its capacity, then switches to slower trickle charging. The amount of time it takes to reach that first 80% will vary depending on your settings and which device you’re charging. This combined process not only lets you get out and about sooner, it also extends the lifespan of your battery.

Ipod Touch Update question; How long does a backup take for you?

I have updated my ipod before and the backup took a few hours lets say around 5 or so... and i was just wondering because this is the second time it has asked me to do this for a new patch and i started around 3:40 p.m. and it is now 6:20 p.m..... the progress only has a 11 bars out of the entire bar (windows xp)... so i was wondering is somthing wrong i also want to know how i would disconnect it because it is taking to long and i might have to leave and i want to take it with me.
also i dont usually back my stuff up and it has like 600 mbs of apps, atleast 5gigs of music and a few videos with some pictures. (8 gig ipod touch first gen got it before speakers /cry)
Message was edited by: Blade1324

I have, just now, about 9 GBs of stuff on my 2G 16 GB and I'd say 8 minutes but I think it's less than that.
I'm constantly switching play lists and changing movies and TV shows as well as pod casts (I won't miss Rachel Maddows if I can help it.) so sync gets a work out.
It's true I've only got 3 apps so if you've got pages that might make a sync longer but not that much longer!
Something isn't working right with your sync.

Made a soundclip of my audio crackling... does it do it for you?

Similar Messages

Maybe you are looking for