Made a UD to 'Scrap'. But Stock Category is "Q" and does not show in MMBE "Blocked"..WHY?

Hi,
I made a UD of an Insp Lot to 'Scrap' in the Inspection lot stock tab.
The system automatically created a material document with movement type 553 (Direction -) and 551 (Direction +)
However the stock Category in the material document is "Q". IS THIS CORRECT? SHOULD THIS BE "S" (This is in the WM tab of the material document).
Also when I query MMBE after the above UD to Scrap, the batch quantity is not shown either in Quality or Blocked stock. IS THIS CORRECT?
Please advise.
Regards
Priyanka

My understanding was when I input a quantity in 'Scrap' field during UD
1) The stock should be blocked (hence it will show under blocked stock column in MMBE)
2) The stock category should be "S" and not "Q"
I agree that in MMBE based on your explanation the stock should not be shown in blocked.
But can you explain why the stock category is "Q" instead of "S"
Regards
Priyanka

Similar Messages

  • I have a iPad mini, I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

    I recently acquired a $15 iTunes card to get apps and music. I have forgotten my security questions and I cannot buy anything HELP (I tried to reset them in the Password and Security tab but the text under the questions does not show)

    Apple ID: Contacting Apple for help with Apple ID account security
    http://support.apple.com/kb/HT5699?viewlocale=en_US&locale=en_US
    Try the link above. Try to find a phone number for your country, call and ask for account security.

  • HT2250 I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour.  Is that correct?

    I have an Apple network utility that with the previous printer (Canon PIXMA iP 5000) found the printer on the Network for use on a wi fi system but a newish printer (Canon MG6150) does not show up as Bonjour.  Is that correct?
    paul.kelly

    Hi Steve,
    No expert, but since nobody else has piped in...
    Did you setup the DNS Server IP?

  • Trying to download OSX Lion from AppStore on my iMac but it just hangs everytime and does not download

    Trying to download OSX Lion from AppStore on my iMac but it just hangs everytime and does not download

    I downloaded Lion on my 17" Macbook Pro and it took about 17 hours. At first I thought it wan't downloading so I cancelled. The next day I tried again and let it ride for the duration; If the status bar is showing that it is downloading (the bar at the bottom will show some blue after about an hour), then be patient. It will download. The installation takes roughly 30 minutes.

  • Category drop down list does not show all taskes

    Hi, I created a project using product Upgrade Assitant for Release 12. I did not add any customized tasks. I just need to run the default tasks for upgrading 11i to r12. I did the setup following Maintenance Wizard User Guide Release 2 without any problem. But when I try to run the steps, the category drop down list only show one task: Configuration. Where are all other categories? Thanks

    Hi, Thank you for the reply. I did successfully finished all the 4 tasks for the configuration category without any errors. I want to continue with other tasks. But the drop down list does not show anything else except Configuration. From the user guide:
    Important Notes:
    • To view the full list of categories applicable to your installation, you must complete all of the steps in the Configuration category. When you complete these steps, you must refresh the lower left pane of your Web browser. The entire list of categories appears.
    What does this mean "you must refresh the lower left pane of your Web browser". I don't see anything to be refreshed. But even after I restarted mw (it must be refreshed now), the category list still now shown.

  • Podcast category for iPod Touch does not show in iTunes

    When connecting my iPod Touch to iTunes, the "Podcasts" category no longer appears in the sidebar under "Devices". The category DOES appear under the Library portion of the sidebar, however. I prefer to manage and sync my podcasts manually within iTunes, but I now have no way of removing old podcasts from my iPod.
    I'm running iTunes 10.0.1.22 under Windows XP and my iPod Touch 3rd generation is running iOS 4.0.

    Start here:
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows

  • IPod Touch shows up on My Computer, but freezes iTunes, and does NOT show up on iTunes, how can i fix this?

    I have honestly spent countless hours trying to fix this, I FINALLY got it to show in My Computer, driver is updated, I have re-installed iTunes numerous times, recently did a FRESH Windows 7 Ultimate re-install, i can't restore the iPod (because it has been restored, and I can't even access it via iTunes) My iPod is NOT broken, it works on my laptop fine, it shows up on iTunes and My Computer, no problem. However, I need to use my iPod on my main computer for songs (iPod's practically new by the way) Like my question states, my iTunes freezes up, and it's very strange because it freezes, then a couple minutes later iTunes works fine, BUT my iPod doesn't show up on the side like it's supposed to. I've done everything, I hope I get some good support, thanks in advance!
    ~Thomas
    Edit: I have the latest update for the driver, and iTunes, iPod has 4.3.3
    Message was edited by: Havocks

    http://support.apple.com/kb/TS2972

  • I seem to have an account set up in iCloud, but when I sign it, it does not show all of my content. It only shows a few of my apps, photo stream is missing How do I view everygthing on my iphone and ipad ?

    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.

    deltajane wrote:
    My iphone4 and my ipad mini were synced to my computer, but now I don't seem to be able to see all of my content nor my photo stream.  I did see everything there several weeks ago, so I know it worked. How do I access those from my computer.  I can't find how to sign on. 
    This is the article that will assist with this part of your post:
    http://support.apple.com/kb/ht4486
    deltajane wrote:
    I signed on to iCloud, but it only shows the icons for Mail, Contacts, Calendar, Notes, Reminders, Find Phone, Numbers, Pages and Keynotes. Where's everything else ?
    What you've outlined in this part of the post is all that icloud stores for you outside of the backup. If you want to restore from the icloud backup you will then have for all practical purposes a carbon restoration back to your device if you restore from the icloud backup.
    deltajane wrote:
    I want to delete photos that are on my iphone, by doing so from the computer, not my phone.
    Syncing your device with itunes will then enable you to remove whatever photos you wish to remove from your device deleting them with the computer and not the iphone.

  • Firefox downloads but does not install on my Win7 64 bit laptop and does not show any files in the software list of programs installed.

    I have installed and uninstalled several times with no success. I had a previous version installed in April 10 but it will not reinstall or run. This problem started about a month ago, in early July.

    moirl wrote:
    5.  I can not get anything off the Blackberry (photos etc.).
    As was stated above:
    1. Go to Options >> Media Card (or Memory)
    (some themes or BlackBerrys may call this "Settings >> Media Card")
    2. Check the following settings (if they are not listed this way, then change to reflect the following:
    a) Media Card Support: On
    b) Mass Storage Mode Support: On
    c) Auto Enable Mass Storage: Yes
    3. Save the settings and exit
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT1386 When I try to sync, my iPod classic goes immediately into 'do not disconnect' (normally), but it is perpetual (hours) and does not transfer the iPod files to the iTunes library. It remains locked into this 'do not disconnect' until I shut down my M

    Hi out there... this problem began when I uninstalled Lion and reinstalled Snow Leopard on my older MacBook. If you have some advice for me, thanks! John

    Try restoring the iPod via iTunes.
    BTW, you posted in the iPod touch forum.

  • You recently sent me a new sim but it is too small and does not fit into my phon

    I don't know what you mean

    Hi,
    You need to call EE and ask them to send you the correct size. Make sure they don't charge you.
    Or you can go into store.
    Thanks,

  • Can connect to computer but window does not show up

    We are having issues with Apple Remote Desktop connecting to a couple of servers. Server version varies. It is happening on one server running 10.6.8 and one computer running 10.5.8 and one running 10.4.11
    When we connect to the server it appears to connect (the computer shows up in the windows menu) but the window to the computer does not show up. It is almost as if there is a no pixel window open. I have tried forcing the VNC server and ARD processes on the server but this doesn't change anything. The only solution for this problem is to restart the server and then ARD works noramlly for a while but it will eventually return to this behavior.
    Has anyone else run into this problem?

    when the issue happens, can you connect using other proticals / programs? ie VNC via connect to computer in the go menu of finder? OR ssh in the terminal to connect to the server?
    if you can ssh into the server, you could try the kickstart command to restart ARD.
    if you can't connect to the server at all. Can you ping the server? Ether way, if you go to the server , will it browse the internet?
    if you can't ping the server, are you using the Fully qualified DNS name to ping? or the IP to ping? or the server.local name to ping?

  • I have rented a movie in ITunes, however it does not show up in the movies on my ATV, but purchased movies do. What's up?

    I have rented a movie through ITUNES, but it does not show up on my ATV movies menu as they have in the past in a category called rentals.  In fact that category isn't shown.  My purchased movies are showing up.  What's up?
    Bindlach61

    A number of people have reported similar issues recently, many appear to have found a discrepancy of some kind in their account settings and making changes to these settings or simply resetting them has resolved the matter.
    Check your account details are correct, check that you are using the correct details for Location, Region and Time Zone. You may want to change these settings and then change them back to see if that helps.
    You might also try logging out of and then back into your iTunes account (Settings > iTunes Store > Apple ID’s > Sign Out) and restarting your router. (Some have reported that after doing this, they need to check for rentals even though it may report that there aren’t any, after which rentals once again appear in the ‘movies’ feature)
    Rentals should appear under their own heading in the ‘Movies’ feature, you might also check at Settings > iTunes Store > Check For Rentals.

  • I have an iphone 4 with the latest updates, but icloud does not show store option. My pics and music are not on the cloud, how do I upload them from my phone to the cloud? I just paid $20 thinking i needed more storage, but that did nothing. help

    I have an Iphone 4 with OS 5.1.1 and it does not show store or music under my icloud tab in the phone. Also, my music and photos don't show on my icloud?
    My contacts show and find my iphone....on the icloud. I just paid $20 thinking more storage would help, but it didn't. How can i cancel that and get a refund?
    Where are is my music on the cloud? How do I upload my music to it? If I lose my phone, it looks like there is no where to go to retrieve my music.
    And itunes won't let me sync my music to my computer. It is all music that I've purchased on itunes.
    Thanks!

    You need to subscribe to iTunes Match to store your music on iCloud:
    http://www.apple.com/itunes/itunes-match/
    To transfer iTunes Store purchases made on your phone to your computer, connect your phone then choose "Transfer purchases..." from the File menu in iTunes.
    Photostream transfers photos taken on your iOS devices to other devices and your computer. For troubleshooting Photostream see: http://support.apple.com/kb/TS3989

  • HT1349 I have registered with my local library and can download books.  But these are not being shown in ITunes, the Library does not show 'audiobooks'.  I have an ipod 6G.  can anyone help please?

    I have recently purchased (from the States) an ipod nano 6th generation.  I belong to a local library and can download books from the audiobooks online section.  Problem is, my iPod when synced to iTunes, does not show Library as a category and audiobooks.  For some reason, it is allowing me to download the books to my iPod, but I am unable to delete them from the iPod, and also, it is giving an echo (I think somehow it is downloading twice which is giving an echo effect).  Not sure what is going on, but if anyone can advise me on this I would be very grateful.

    Hello mrsbonniesue
    If you have an issue with the audiobook showing up in music, check to see if those tracks are labeled as audio books or music. The article below will explained as well as I have highlighted the main portion for changing that information.
    iTunes 11 for Windows: Edit song and CD information
    http://support.apple.com/kb/PH12360
    Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook
    Regards,
    -Norm G.

Maybe you are looking for

  • TS1702 I can't download apps it says they are not available how do I fix this?

    I can't download apps it says they are not available how do I fix this?

  • How well does Aperture 2.1 work with Adobe Photoelements 6?

    I am currently working with Aperture 2.1. I understand from the Apple one-to-one trainers that I would get improved editing if I installed Adobe Photoelements 6. Yet, when I had Adobe Phototoelements 5 on my Leopard, it crashed iPhoto and iPhoto cras

  • Compiling CSS into SWF, folders

    Hello all! I'm compiling a few CSS files into SWF to have them available at runtime. Unfortunatly, these are currently located in the root directory of my application but I would like them to be in a style folder. Any idea on how to do it (At compile

  • Change of user name

    Hi all, I just bought a Macbook pro. I was wondering if anyone knew how to change the user name of the computer. The one associated to the little house icon. I have been trying unsuccessfully to do it! A part that I'm really enjoying my new computer!

  • ABAP: Dynamic creation of transparent container

    Hello, I have this code and it fails (null pointer exception): transparent_container = cl_wd_transparent_container=>new_transparent_container( ).   cl_wd_grid_data=>new_grid_data( element = transparent_container ).   ui_container->add_child( transpar