Made site in Dreamweaver, doesn't display correctly using free hosts

Hello everyone
I'm just a beginner using DW and have a slightly older
version - DW MX2004. I have built my site in DW, and wanted to try
a free web hosting service until I see if I like having a website
and will actually be good at keeping it updated before I find a
paid service.
The problem is that whenever I upload my files into the free
webhosting service (I've tried several - Bravenet, Freehostia,
110mb) the pages don't display any of the formatting shown in DW. I
used a page design CSS sample to create the pages in DW, would that
make a difference?
Is it just that the free hosting services don't support DW?
Am I missing a step in my design before I try and upload them?
Any help gratefully received.
Thanks.

Are you using an external css file? If you are make sure to
point it to the root directory by placing a "/" slash (minus the
quotes. So for example if your path is
href="css/style.css"
change it to
href="/css/style.css"
I don't actually use any of dreamweaver templates or wizards,
so I'm not sure how it creates the paths. Hope this helps.
Note: As far as I know dreamweaver is just an editor
(glorified notepad) and doesn't have any effect on your files and
doesn't need any support on hosts. There may be some advanced
features that require support but none that I am aware of.

Similar Messages

WRT54G version 6 - router setup screen via Internet Explorer 7 doesn't display correctly

Hi,
I've just set up my WRT54G router. I'm able to connect to the internet and I'm able to connect directly to the router via IE but the setup screen doesn't display correctly. I've tried resetting the computer and updating the firmware but it still doesn't display correctly. Almost all of the text is missing except for the Linksys logo and a few drop down menus. Any help/suggestions would be great, thanks.

Hi gang,
There a number of things that you can do to solve this problem but most of them involve changing the rules that you have already configured in your ZoneAlarm profile. My preferred solution is to:
-unplug your router from the WAN (why not?)
-turn off zone alarm
-access your router's administration page at http://192.168.1.1
-find the admin page where you can switch admin access from http to https
--- **save your changes !!**
-reboot your router
-plug the WAN cable back into your router
-turn ZoneAlarm back on
-access your admin page at https://192.168.1.1 ( note the 's')
Bob is your sister's brother! Your admin page should work as it is supposed to. Your router and ZoneAlarm should be playing nicely together. You haven't borked your finely tuned zonealarm rules. You were going to bookmark your admin page anyway, and if you want to allow remote administration, you would want to use https anyway. Nothing is broken and you fixed two things. "Its a good thing."Message Edited by ubuibi on 12-27-200609:10 AM
There are really only 10 kinds of people in the world;
Those who understand binary and those who don't.
ubuibi

[SOLVED] urxvt doesn't display correctly some special characters

Hello everyone,
I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
Here is a comparison between xfce4-terminal and rxvt-unicode (I used theses characters as exemple):
xfce4-terminal :
urxvt :
And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
!Font
URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
!General
URxvt.scrollBar: false
URxvt*imLocale: fr_CH.UTF-8
URxvt.saveLines: 5000
URxvt.geometry: 95x26+50+50
Has someone an idea what the problem could be?
Thank's in advance.
Last edited by mwm (2013-11-13 13:15:48)

This is what I think is happpening.
PragmataPro may not contain those glyphs. It appears to have a wide array of glyphs but it is not unicode complete.
Xfce-terminal is a vte terminal. When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font. Urxvt will only use the glyphs in the font or fonts specified. If PragmataPro does not contain the glyphs, urxvt will display boxes.
You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify. Here's an example from my urxvt configs:
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me. This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

Vim doesn't display correctly utf8 characters

Hi,
I don't use an utf8 locale, but some files (like latex sources of my reports) are in utf8 for compatibility with other pcs. Since a while, but i cannot recall exactly when (normally, I don't use vi for latex), it doesn't display correctly such files. Emacs does, kate does, but not vim. I tried to set encoding and file-encoding in vim, but it didn't fix the issue. Any clue? Is vim broken?
Related question. It is safe to switch to utf8 locale (I mean, in rc.conf) months after the installation?
domanov

lang2 wrote::set enc=utf8
It didn't work (as i said in my previous post).
I changed from it_IT@EURO to it_IT.UTF8 in rc.conf, restarted and now vim is fine (the corresponding line in locale.gen was already uncommented and I rerun locale-gen just to be sure). Now man pages are really ugly, even worse if I erase the option -Tlatin1 from NROF line in man.conf (as suggested in the man.conf manual). Ok, let's deal with that, now.
Do I risk to broke anything more important? Shall i convert to utf-8 all the text files in /home, /etc and so on??

Youtube doesn't display correctly since I installed latest version of firefox

youtube doesn't display correctly anymore...adobe flash has been updated and java is enabled. This is what it looks like now...
"Loading...
Videos
Music
Shows
Trailers
Live
All Categories
Categories "

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Firefox Doesn't display correctly and is very laggy on sites with CloudFlare DDoS Protection

Since 35.0 and above i have been getting weird behaviour on sites with CloudFlare DDoS protection.
When i open the site in a new window, it takes a really long time and sometimes doesn't display at all and gives me a blank page. and now it just starts to say "New Tab" and i can't hit refresh.
When the site actually loads after 20 something attempts, the site is laggy, any action takes upwards of 20 seconds.
Whenever i try to open something, i get a blank page with the URL at tabs. Whenever i try to like or post anything, it delays by 15-20 seconds.
Site i am trying to use with much failure. http://hypixel.net/
Anyone else having this issue?

''Gnospen [[#answer-693501|said]]''
<blockquote>
maybe it would help if you open "troubleshooting information" (under help)
and copy it to clipboard and paste it here
</blockquote>
"application": {
"name": "Firefox",
"version": "35.0.1",
"userAgent": "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:35.0) Gecko/20100101 Firefox/35.0",
"supportURL": "https://support.mozilla.org/1/firefox/35.0.1/WINNT/en-US/",
"numTotalWindows": 1,
"numRemoteWindows": 0
"crashes": {
"submitted": [
"id": "bp-267af71f-8bf3-46cc-883e-ff65e2150222",
"date": 1424594056152,
"pending": false
"pending": 1
"modifiedPreferences": {
"accessibility.typeaheadfind.flashBar": 0,
"browser.cache.disk.smart_size.first_run": false,
"browser.cache.disk.smart_size.use_old_max": false,
"browser.cache.disk.capacity": 358400,
"browser.cache.disk.smart_size_cached_value": 358400,
"browser.cache.frecency_experiment": 4,
"browser.fixup.domainwhitelist.googler": true,
"browser.fixup.domainwhitelist.google": true,
"browser.fixup.domainwhitelist.gmail": true,
"browser.fixup.domainwhitelist.totaldramawiki": true,
"browser.fixup.domainwhitelist.omegle": true,
"browser.newtab.url": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw",
"browser.places.smartBookmarksVersion": 7,
"browser.sessionstore.upgradeBackup.latestBuildID": "20150122214805",
"browser.sessionstore.max_resumed_crashes": 100,
"browser.sessionstore.enabled": true,
"browser.startup.homepage_override.mstone": "35.0.1",
"browser.startup.homepage": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw|http://www.youtube.com/",
"browser.startup.homepage_override.buildID": "20150122214805",
"dom.max_chrome_script_run_time": 0,
"dom.mozApps.used": true,
"extensions.lastAppVersion": "35.0.1",
"font.internaluseonly.changed": true,
"gfx.direct3d.last_used_feature_level_idx": 0,
"keyword.URL": "http://mystart.incredibar.com/?a=6PRnKQcHXQ&i=26&did=10963&loc=skw&search=",
"media.gmp-gmpopenh264.lastUpdate": 1423171183,
"media.gmp-gmpopenh264.version": "1.3",
"media.gmp-manager.lastCheck": 1424516177,
"network.cookie.prefsMigrated": true,
"places.database.lastMaintenance": 1424565640,
"places.history.expiration.transient_current_max_pages": 104858,
"plugin.disable_full_page_plugin_for_types": "application/pdf",
"plugin.state.nppdf": 2,
"plugin.importedState": true,
"privacy.sanitize.timeSpan": 0,
"privacy.cpd.cookies": false,
"privacy.sanitize.migrateFx3Prefs": true,
"privacy.cpd.sessions": false,
"storage.vacuum.last.places.sqlite": 1424326926,
"storage.vacuum.last.index": 1
"lockedPreferences": {},
"graphics": {
"numTotalWindows": 1,
"numAcceleratedWindows": 1,
"windowLayerManagerType": "Direct3D 11",
"windowLayerManagerRemote": true,
"adapterDescription": "Intel(R) HD Graphics 4000",
"adapterVendorID": "0x8086",
"adapterDeviceID": "0x0166",
"adapterSubsysID": "00000000",
"adapterRAM": "Unknown",
"adapterDrivers": "igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32",
"driverVersion": "8.15.10.2712",
"driverDate": "3-26-2012",
"adapterDescription2": "",
"adapterVendorID2": "",
"adapterDeviceID2": "",
"adapterSubsysID2": "",
"adapterRAM2": "",
"adapterDrivers2": "",
"driverVersion2": "",
"driverDate2": "",
"isGPU2Active": false,
"direct2DEnabled": true,
"directWriteEnabled": true,
"directWriteVersion": "6.2.9200.16571",
"webglRenderer": "Google Inc. -- ANGLE (Intel(R) HD Graphics 4000 Direct3D9Ex vs_3_0 ps_3_0)",
"info": {
"AzureCanvasBackend": "direct2d",
"AzureSkiaAccelerated": 0,
"AzureFallbackCanvasBackend": "cairo",
"AzureContentBackend": "direct2d"
"javaScript": {
"incrementalGCEnabled": true
"accessibility": {
"isActive": false,
"forceDisabled": 0
"libraryVersions": {
"NSPR": {
"minVersion": "4.10.7",
"version": "4.10.7"
"NSS": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"NSSUTIL": {
"minVersion": "3.17.2",
"version": "3.17.2"
"NSSSSL": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"NSSSMIME": {
"minVersion": "3.17.2 Basic ECC",
"version": "3.17.2 Basic ECC"
"userJS": {
"exists": true
"extensions": [
"name": "Adblock Plus",
"version": "2.6.7",
"isActive": false,
"id": "{d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}"
"name": "FastFreeConverter",
"version": "5.6",
"isActive": false,
"id": "extension@Fast_Free_Converter.com"
"name": "Mozilla hotfix",
"version": "2.0",
"isActive": false,
"id": "[email protected]"
"name": "Updater By SweetPacks",
"version": "2.0.0.609",
"isActive": false,
"id": "{8E9E3331-D360-4f87-8803-52DE43566502}"
"experiments": []
}

Yahoo home page doesn't display correctly. All my other sites are OK. Page style is set to "Basic Page Style. What else can be wrong?"

Yahoo home page does not display properly, while all my other web pages do display correctly. I checked View, Page Style, and it is set to Basic Page Style. What else can be wrong?

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

PhoneGap Build Dreamweaver Extension not displaying correct build state

Starting yesterday the PhoneGap Build Dreamweaver Extension doesn't display the correct build state for Android or Symbian after clicking "Rebuild Application". They always show as Build Queued but if you look at the build.phonegap.com site they have completed the build. I have tried loging out of the screen and logging back in. I have tried closing out of Dreamweaver and reopening. Both sections display correctly until the next time you hit "Rebuild Application".

Ok.
I backed up PGB and deleted the folder.
I created a new empty site and submitted it to Build. Once I reached the Key screen asking for your iOS, Android and Blackberry keys, I clicked continue and recieved the attached error.
I then clicked ok and it added a index.html and config.xml to the empty site. No matter how many times I clicked OK this error would not go away. So then I closed out of dreamweaver and reopened submitted the build again this time I made it past the Key screen but it said I had exceeded the number of Build projects I am allowed. A Project Settings file was never created for the new empty project.
I will send the Project Settings file for the project I am having issues with and the original PGB and the new PGB.

Website doesn't display correctly, some areas cut off

All pages of my website cut off some text at the top and bottom. This does not happen with any other web pages I browse! The site was created by our developer and based on a Themeforest theme (from Envato) called Franklin Crowdfunding. Interestingly, my wife's computer does not have this problem and also uses Firefox. So I compared add-ons, extensions, etc. with hers and disabled those on my machine only. Also reinstalled latest Java, Firefox, started in Safe Mode, disabled acceleration and everything else I could find in the troubleshooting section. Nothing has worked. BTW site displays correctly on ipad as well.
I did notice that the first time I navigated to the page after reinstalling Firefox it worked fine. But after closing and restarting Firefox the problem reappeared.
Website is www.accoladesintl.com ...red copy at top is partially cut off (bottom half, not top half) and bottom half of the contact info at bottom.
This problem does not happen in IE. I would rather use your product than it or google, so please help me find the problem!

You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
*Hold down the Shift key and left-click the Reload button
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Command + Shift + R" (Mac)
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make sure to backup this data or make a note.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Design View Doesn't Display Correctly

I am new to this forum so hope I do things correctly!
I have Vista and am using Dreamweaver 8 to produce 4 of my
websites, but I am having trouble on my www.victorian-cards.com
site. All the files where I have the problem validate without
errors and display correctly in both IE and FF. I have nine files
with this problem. One of the problem pages is
http://www.victorian-cards.com/funny-cards2.htm
When I look at these nine files in the Design View, all I can
see are the correct picture at the top, the top and bottom
navigation, Google Search, and the footer. Where the body is I see
horizontal lines and </td>. The </td> is highlighted in
yellow. I thought perhaps I had a coding error, but it validates
without any errors.
Help! I sure would appreciate some words of wisdom. I can
work in the code, but I like to check the design view before I
upload my files.
I have read that a lot of people are having this problem. I
did try changing the magnification, but this did not help.
Jeanne
Victorian Cards

> Thanks for the quick reply. I tried this, but nothing
changed. Any other
> ideas?
>
> Jeanne
the page has html syntax errors- having to do with tr and td
tags.
Look at the code view in dw- see the yellow highlights??
It's probably just one error, find that one out and most of
the others will
be gone. There's too much stuff on the page for me to
sight-read the code
and find the error.
suggestion? Make a copy of the page, then start deleting
content so the
problem syntax error is more obvious. Delete working complete
tables to
isolate the problem one
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

32bpp application doesn`t display correctly or crashes when we remote via SCCM 2007 remotetool

By default remotetool’s Color Depth is set to 16 bpp
Daniel
Synapse application is a PACS viewer used by radiology department in our hospital.
Synapse is designed to run in 32 bpp, therefore when we remote to it, the picture is not dispayed.
Instead it displays an error Your display is configured for 65536 colors. This mode is unsupported. Use 24 or 32 colour mode.
As soon as we disconnect or end the remote session. The picture on users workstation
turns black. Synapse needs to be re-launched in order to display properly again.
Is there a way to set the Color Depth default on remotetool to 24bbp ?
When we close the remote session, Synapse crashes or doesn’t display any pictures, leaving them black.
Here’s how the user would see it
On the other hand if we pre-set the colour depth to 24bbp before opening Synapse. Everything is displayed correctly on both admin and the remote workstation, while in a remote session.

Yes, I know this is an old post, but I’m trying to clean them up.
To my knowledge there is no way to do this, however I would suggest looking at remote desktop instead of CM0-7 Remote control.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Custom ErrorDocument doesn't display correctly

I have created a custom ErrorDocument 401 to use in
.htaccess. After the user cancels out of the login screen in
Firefox or Opera, they are redirected to the authreqd.html file for
the custom error message. However, when that page is diplayed in
Firefox or Opera, none of the background images load. The Alt text,
when available, is shown instead. Why would the images not load for
this file when they work correctly for all other links.
Interestingly, when you type in the URL and go directly to that
page, it does display correctly.
P.S. Safari doesn't load the custom error page at all. An
incorrect username/password returns the login screen repeatedly,
and cancelling returns you to the page you were previously on.
Here is the custom error
file

There are tonnes of possibilities and many websites with suggestions. I tried all sorts of these option (clear cache, clear cookies, anti-virus changes, page style options etc) with no success until eventually I accidentally changed my character encoding autodetect (firefox 6) from "off" to "universal" and everything is fine.

Local Calculation (Summation) in query doesn't display correctly in web

Hi All,
I have been working on a complicated query where I have formulas that perform calculations. I then Hide these formulas and use them in another formula for further calculations. The new calculations I then use local summation to basically just add the columns values and come up with an overall result. Works perfect and is displayed perfectly.
Problem is now in the web. Either using a Pie Chart or just simply an Analysis item, the values are not displayed correctly at all. The Pie Chart only displays the first row of data (not the overall result...which is a local summation...which is what I would prefer) and suprised that the Analysis item doesn't basically display what the query does. I'm guessing it has to do with this local calculation.
Can someone explain this behavior?
Thanks.

Anyone any ideas?

Horizontal Spry Menu doesn't display correctly in browser. Displays correctly in live view and prev

Hello,
I am new to web building and am having trouble with my Spry menu. It won't display correctly.
www.denverphotographics.com
Please Help!!
Thanks,
Rob

#1 Upload your Spry Assets folder to your remote server. The necessary CSS & JavaScript files are 404 not found. That's why your menu looks un-styled.
#2 Loud, gratuitous, unsolicited music on web sites is a very bad idea. It forces a lot of people to click away from your site and never return. It so happens I was listening to other media when I clicked on your site. That cacophony of competing noise was not the least bit enjoyable.
Nancy O.

SVG text doesn't display correctly in Illustrator

The following SVG (generated via Cairo) displays correctly within browsers (Firefox and Safari), but not within Illustrator: the glyph symbols are drawn at the wrong scale, upside-down, and on top of one another. Is the problem within the SVG file itself? That doesn't seem likely, given that the browsers have no problem with the file. If the problem is within Illustrator... what is the root of the problem, and is there any possible workaround?
<?xml version="1.0" encoding="UTF-8"?>
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="700pt" height="700pt" viewBox="0 0 700 700" version="1.1">
<defs>
<g>
<symbol overflow="visible" id="glyph0-0">
<path style="stroke:none;" d="M 11.3125 -9.078125 C 8.914062 -9.078125 7.253906 -8.800781 6.328125 -8.25 C 5.410156 -7.695312 4.953125 -6.765625 4.953125 -5.453125 C 4.953125 -4.398438 5.296875 -3.5625 5.984375 -2.9375 C 6.679688 -2.320
312 7.625 -2.015625 8.8125 -2.015625 C 10.457031 -2.015625 11.773438 -2.597656 12.765625 -3.765625 C 13.765625 -4.929688 14.265625 -6.476562 14.265625 -8.40625 L 14.265625 -9.078125 Z M 17.21875 -10.296875 L 17.21875 0 L 14.265625 0 L 1
4.265625 -2.734375 C 13.585938 -1.640625 12.742188 -0.832031 11.734375 -0.3125 C 10.722656 0.207031 9.488281 0.46875 8.03125 0.46875 C 6.175781 0.46875 4.703125 -0.046875 3.609375 -1.078125 C 2.523438 -2.117188 1.984375 -3.507812 1.9843
75 -5.25 C 1.984375 -7.28125 2.660156 -8.8125 4.015625 -9.84375 C 5.378906 -10.875 7.410156 -11.390625 10.109375 -11.390625 L 14.265625 -11.390625 L 14.265625 -11.6875 C 14.265625 -13.050781 13.8125 -14.101562 12.90625 -14.84375 C 12.00
7812 -15.59375 10.753906 -15.96875 9.140625 -15.96875 C 8.109375 -15.96875 7.101562 -15.84375 6.125 -15.59375 C 5.144531 -15.351562 4.203125 -14.984375 3.296875 -14.484375 L 3.296875 -17.21875 C 4.390625 -17.644531 5.445312 -17.960938 6
.46875 -18.171875 C 7.488281 -18.378906 8.476562 -18.484375 9.4375 -18.484375 C 12.050781 -18.484375 14 -17.804688 15.28125 -16.453125 C 16.570312 -15.097656 17.21875 -13.046875 17.21875 -10.296875 Z M 17.21875 -10.296875 "/>
</symbol>
<symbol overflow="visible" id="glyph0-1">
<path style="stroke:none;" d="M 16.0625 -9 C 16.0625 -11.1875 15.613281 -12.898438 14.71875 -14.140625 C 13.820312 -15.378906 12.585938 -16 11.015625 -16 C 9.453125 -16 8.222656 -15.378906 7.328125 -14.140625 C 6.429688 -12.898438 5.984
375 -11.1875 5.984375 -9 C 5.984375 -6.820312 6.429688 -5.113281 7.328125 -3.875 C 8.222656 -2.632812 9.453125 -2.015625 11.015625 -2.015625 C 12.585938 -2.015625 13.820312 -2.632812 14.71875 -3.875 C 15.613281 -5.113281 16.0625 -6.8203
12 16.0625 -9 Z M 5.984375 -15.3125 C 6.597656 -16.382812 7.378906 -17.179688 8.328125 -17.703125 C 9.285156 -18.222656 10.425781 -18.484375 11.75 -18.484375 C 13.9375 -18.484375 15.710938 -17.613281 17.078125 -15.875 C 18.453125 -14.13
2812 19.140625 -11.84375 19.140625 -9 C 19.140625 -6.164062 18.453125 -3.878906 17.078125 -2.140625 C 15.710938 -0.398438 13.9375 0.46875 11.75 0.46875 C 10.425781 0.46875 9.285156 0.207031 8.328125 -0.3125 C 7.378906 -0.832031 6.597656
-1.628906 5.984375 -2.703125 L 5.984375 0 L 3 0 L 3 -25.078125 L 5.984375 -25.078125 Z M 5.984375 -15.3125 "/>
</symbol>
<symbol overflow="visible" id="glyph0-2">
<path style="stroke:none;" d="M 16.09375 -17.359375 L 16.09375 -14.578125 C 15.257812 -15.046875 14.421875 -15.394531 13.578125 -15.625 C 12.734375 -15.851562 11.878906 -15.96875 11.015625 -15.96875 C 9.097656 -15.96875 7.609375 -15.359
375 6.546875 -14.140625 C 5.484375 -12.921875 4.953125 -11.207031 4.953125 -9 C 4.953125 -6.800781 5.484375 -5.09375 6.546875 -3.875 C 7.609375 -2.65625 9.097656 -2.046875 11.015625 -2.046875 C 11.878906 -2.046875 12.734375 -2.160156 13
.578125 -2.390625 C 14.421875 -2.617188 15.257812 -2.96875 16.09375 -3.4375 L 16.09375 -0.6875 C 15.269531 -0.300781 14.414062 -0.015625 13.53125 0.171875 C 12.644531 0.367188 11.703125 0.46875 10.703125 0.46875 C 7.984375 0.46875 5.820
312 -0.382812 4.21875 -2.09375 C 2.625 -3.800781 1.828125 -6.101562 1.828125 -9 C 1.828125 -11.945312 2.632812 -14.265625 4.25 -15.953125 C 5.863281 -17.640625 8.078125 -18.484375 10.890625 -18.484375 C 11.804688 -18.484375 12.695312 -1
8.390625 13.5625 -18.203125 C 14.4375 -18.015625 15.28125 -17.734375 16.09375 -17.359375 Z M 16.09375 -17.359375 "/>
</symbol>
</g>
</defs>
<g id="surface1">
<g style="fill:rgb(0%,0%,0%);fill-opacity:1;">
<use xlink:href="#glyph0-0" x="100" y="130.94043"/>
<use xlink:href="#glyph0-1" x="120.222656" y="130.94043"/>
<use xlink:href="#glyph0-2" x="141.169922" y="130.94043"/>
</g>
</g>
</svg>

Yes, a browser displays it fine. But they also often display invalid html code fine. Your code does validate. And InkScape does open it fine. InkScape does have it in the root rather than on a layer, don't know if that is making a difference to Illustrator or not. Nothing else I have that opens SVG files deals with it as well as Illustrator.
Here is the same file, text put back and resized down a bit. Run it through validation. You'll note Illustrator does not use the MathML 2.0 extensions. Perhaps that is the hang up.
<?xml version="1.0" encoding="utf-8"?>

<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
<svg version="1.1" id="Layer_1" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" x="0px" y="0px"
width="612px" height="792px" viewBox="0 0 612 792" enable-background="new 0 0 612 792" xml:space="preserve">
<symbol id="glyph0-0" viewBox="-7.617 -9.477 15.234 18.953">
<path id="path9_1_" fill="#010101" d="M1.711-0.07c-2.398,0-4.059,0.277-4.984,0.828c-0.918,0.555-1.375,1.484-1.375,2.797
c0,1.055,0.344,1.891,1.031,2.516c0.695,0.617,1.641,0.922,2.828,0.922c1.645,0,2.961-0.582, 3.953-1.75
c1-1.164,1.5-2.711,1.5-4.641V-0.07H1.711z M7.617-1.289V9.008H4.664V6.273c-0.68,1.094-1.523,1.902-2.531,2.422
C1.121,9.215-0.113,9.477-1.57,9.477c-1.855,0-3.328-0.516-4.422-1.547C-7.078,6.891-7.617,5 .5-7.617,3.758
c0-2.031,0.676-3.563,2.031-4.594c1.363-1.031,3.395-1.547,6.094-1.547h4.156V-2.68c0-1.363- 0.453-2.414-1.359-3.156
c-0.898-0.75-2.152-1.125-3.766-1.125c-1.031,0-2.039,0.125-3.016,0.375c-0.98,0.242-1.922,0 .609-2.828,1.109v-2.734
c1.094-0.426,2.148-0.742,3.172-0.953c1.02-0.207,2.008-0.313,2.969-0.313c2.613,0,4.563,0.6 8,5.844,2.031
C6.969-6.09,7.617-4.039,7.617-1.289z"/>
</symbol>
<symbol id="glyph0-1" viewBox="-8.07 -12.773 16.141 25.547">
<path id="path12_1_" fill="#010101" d="M4.992,3.305c0-2.188-0.449-3.898-1.344-5.141C2.75-3.074,1.516-3.695-0.055-3.695
c-1.563,0-2.793,0.621-3.688,1.859c-0.898,1.242-1.344,2.953-1.344,5.141c0,2.18,0.445,3.887 ,1.344,5.125
c0.895,1.242,2.125,1.859,3.688,1.859c1.57,0,2.805-0.617,3.703-1.859C4.543,7.191,4.992,5.4 84,4.992,3.305z M-5.086-3.008
c0.613-1.07,1.395-1.867,2.344-2.391C-1.785-5.918-0.645-6.18,0.68-6.18c2.188,0,3.961,0.871 ,5.328,2.609
C7.383-1.828,8.07,0.461,8.07,3.305c0,2.836-0.688,5.121-2.063,6.859c-1.367,1.742-3.141,2.6 09-5.328,2.609
c-1.324,0-2.465-0.262-3.422-0.781c-0.949-0.52-1.73-1.316-2.344-2.391v2.703H-8.07v-25.078h 2.984V-3.008z"/>
</symbol>
<symbol id="glyph0-2" viewBox="-7.133 -9.477 14.266 18.953">
<path id="path15_1_" fill="#010101" d="M7.133-8.352v2.781C6.297-6.039,5.461-6.387,4.617-6.617
C3.773-6.844,2.918-6.961,2.055-6.961c-1.918,0-3.406,0.609-4.469,1.828s-1.594,2.934-1.594, 5.141c0,2.199,0.531,3.906,1.594,5.125
s2.551,1.828,4.469,1.828c0.863,0,1.719-0.113,2.563-0.344c0.844-0.227,1.68-0.578,2.516-1.0 47v2.75
C6.309,8.707,5.453,8.992,4.57,9.18C3.684,9.375,2.742,9.477,1.742,9.477c-2.719,0-4.883-0.8 52-6.484-2.563
c-1.594-1.707-2.391-4.008-2.391-6.906c0-2.945,0.805-5.266,2.422-6.953c1.613-1.688,3.828-2 .531,6.641-2.531
c0.914,0,1.805,0.094,2.672,0.281C5.477-9.008,6.32-8.727,7.133-8.352z"/>
</symbol>
<use xlink:href="#glyph0-0" width="15.234" height="18.953" id="use20" x="-7.617" y="-9.477" transform="matrix(6.3499 0 0 6.3499 102.2407 253.0596)" overflow="visible"/>
<use xlink:href="#glyph0-1" width="16.141" height="25.547" id="use22" x="-8.07" y="-12.773" transform="matrix(6.2672 0 0 6.2672 218.9004 233.1802)" overflow="visible"/>
<use xlink:href="#glyph0-2" width="14.266" height="18.953" id="use24" x="-7.133" y="-9.477" transform="matrix(6.3016 0 0 -6.3016 326.4082 253.5166)" overflow="visible"/>
</svg>
Take care, Mike

Made site in Dreamweaver, doesn't display correctly using free hosts

Similar Messages

Maybe you are looking for