Maemo / MeeGo for N series devices?

Hi,
is there a chance Nokia offers an update of N series devices like the N97 to Maemo / MeeGo? I think this would offer a whole new world of software to these devices. I am pretty sure one or the other engineer has already played with this idea in his lab

It's not possible and it won't happen ! I would think there is a good chance we may get a tiny overspill from Symbian^3, but that's the best you can hope for, the N97 has neither the memory or the processor speed to perform much better. More likely that memory management may be improved in later updates and would think there will be at least another 12 months support from Nokia, but that's about it. That said, it's only my opinion , but I wouldn't hold your breath !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Can any one suggest me how to use drawPixels method for 40 series devices

Hello!
I am using drawPixels method of DirectGraphics class the code I have written is :-
Image offscreen=DirectUtils.createImage(width,height,0x00000000);// width and heights are integer value
public final int MODEL=DirectGraphics.TYPE_INT_8888_ARGB ;
Graphics offgra = offscreen.getGraphics();
DirectGraphics directgraphics = DirectUtils.getDirectGraphics(offgra);
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,MODEL); // imgData is a int array(int imgData[]) which contains required pixels of image.
The above code is working fine with NOKIA 60 series device but when i use it with NOKIA 40 series device it gives java.lang.IllegalArgumentException.
same time if i use :-
directgraphics.drawPixels(imgData,false,0,width,0,0,width,height,0,DirectGraphics .TYPE_USHORT_4444_ARGB ) ;
// imgData is a short array(short imgData[]) which contains required pixels of image. i have used different formet here.
it works fine with 40 series device,
can any one suggest me how to use drawPixels method for 40 series devices with format
DirectGraphics .TYPE_INT_8888_ARGB .

If Remote wipe is activated it can't be undone. And Once the Wipe is done, the device can nö longer be tracked.
Sorry.

SCB-68 Reference Label for M series devices

What's the difference between the SCB-68 Reference Label M series devices connector 0 and connector 1? I'm installing a NI PCI-6221-M series Multifunction DAQ and the SCB-68 connector block, and I don't know how to make the physical connections. With the SCB-68 kit, I received the Reference Label for the E-series devices. In the NI site, there is info about the connector 0, but what is the connector 0 and connector 1?
Thanks,
ZeK

Good question Zek. The M series family uses a smaller version of the 68-pin connector used on E series so that two connectors can be located on the same board. The second connector is available on certain M seriies boards in order to provide connectivity to additional channels. In the case of the 6221, there is only one connector.
The 6221 is fully compatible with the SCB-68. The following link provides a revised version of the SCB-68 label adapted for M Series devices:
http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/61ed77983ad7cca386256f66008215f1/$FILE/SCB68%20M%20Series%20Connector%200.pdf
For pinout specific to a particular M Series device, you can refer to the M series help available at either one of the following locations:
http://digital.ni.com/manuals.nsf/websearch/9477D6DF1FE5A72986256FAB00633DE4?OpenDocument&node=132100_US
http://digital.ni.com/manuals.nsf/websearch/3AE9D4533E03A6EF86256FE300809FE6 (HTML format)

Qualified Disks for px-Series Devices

Note: The following information pertains only to px-Series network devices. If you have any other StorCenter network device, including ix-Series devices, this does not apply to you.
Before adding new hard drives to your StorCenter px-Series network device, please be sure to familiarize yourself with the following information. If you still have any additional questions about this topic, feel free to post them below.
Supported Drives:
For the current list of drive brands and models that have been tested with the StorCenter px devices and are supported for use, please visit https://iomega-na-en.custhelp.com/app/answers/detail/a_id/26012. Our approved hard drive list is still growing! Please check back with the list often or subscribe for updates by clicking on the "Notify Me" button on the above link.
Important: All disks within a single storage pool must meet the following requirements:
Same manufacturer
Same rotational speed
Same capacity
Failure to meet these requirements may result in unpredictable device behavior and will not be supported by Iomega. If you need technical assistance, please be prepared to backup your data and remove any unsupported drives or configurations.
Pre-Installed Drives:
If you purchased your px device either fully or partially populated with drives, the device’s operating system resides partially on the drives. To replace all of the drives from the original configuration, follow the steps here: https://iomega-na-en.custhelp.com/app/answers/detail/a_id/27190

What model px4 do you have? Version 4.0.8.23976 is the latest LifeLine firmware release for the px2-300d and px4-300d network storage devices while Version 4.1.4.24001 is the latest for the px4-400d.
There is not any supported way to disable or restrict the services you are referring to. Debian is the operating system of the device so it would not be able to disable that unless by turning the device off.
Apache is the web interface of our devices so if you disable Apache you will not be able to access the web management console and would have to do any configuration by SSH at that point. It might be able to disable Apache if you really wanted to, but the device may just restart the service after disabling it as it is a main function of the device.
I'm not sure about OpenSSL and PHP, but if you are concerned about the Heartbleed bug, it only affects the px4-400d and px4-400r. Please see the following release from Lenovo: OpenSSL Heartbleed security vulnerability
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Connection Managers for N-series devices

Does anyone know of a connection manager like the Birdstep SmartConnect program that is available for say the N95 8GB? I currently have a Nokia E71 which has the Birdstep program availble from the Download! application but I wasn't able to find it on the N95 8GB.
Nokia E71-1 (254.03)
110.07.127
RM-346

It's not possible and it won't happen ! I would think there is a good chance we may get a tiny overspill from Symbian^3, but that's the best you can hope for, the N97 has neither the memory or the processor speed to perform much better. More likely that memory management may be improved in later updates and would think there will be at least another 12 months support from Nokia, but that's about it. That said, it's only my opinion , but I wouldn't hold your breath !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

SCB-68A Reference Label for R series

Cannot find anywhere a working pdf/lisf for SCB-68A for R series devices.
Thanks

Let's try this KnowledgeBase Article:
Where Can I Find NI SCB-68A Quick Reference Labels?
Joey S.
Software Product Manager
National Instruments

Ribbon cable for M-Series VHDCI connector

Looking for ribbon cable for NI's new M Series boards which use VHDCI
connectors. These are 68 pin connectors, 34 on each side, 0.8 mm
pitch cable.
Connectors can be obtained fom DigiKey # 787131-3 or from Honda
Connectors who carry 4 with different wire gauges (HDRA series).
Steve

Sean,
I think the SHC68-68-EP is for E series. The SHC68-68-EPM is for M
series (VHDCI connector).
I simply need a short length of bare ribbon cable so I can attach it
to my existing bare conector and bring out its digital outputs. I've
not been able to locate ribbon cable with this 0.8 mm wire spacing.
Steve
On Mon, 18 Oct 2004 17:12:29 -0500 (CDT), "Sean C."
wrote:
>National Instruments only makes 1 type of cable for M-Series devices
>(SHC68-68-EP). If you would like a ribbon cable, you will need to
>build one.

Demand Paging for E-Series

When will nokia develop new firmware with demand paging for e-series devices like e61i, e65 and e90 ? we already know that n95 has demand paging. Even n73 has it in the latest firmware. This had sped up n73 tremendously (note: n73 is older than most e-series & it does not have wifi)
so my question is :
1) is demand paging exclusive for n-series ?
2) will future versions of firmware for e-series devices have
demand paging ?
3) will there be new versions of firmware for e-series devices as
fast as nokia has developed new firmware for n-series
almost every 3-6 months for each n-series model.

Jaakko Kaidesoja
N-Gage boss: 'We're not scared of the PlayStation phone'
N73 will be one of the mobiles supporting the new n-gage platfrom
http://www.pocketgamer.co.uk/r/N-Gage/N-Gage+(next+gen+platform)/news.asp?c=5917
The N82 and both N95 handsets will be next in line for the commercial launch, but bad news N73 owners: you're going to have to wait a while.
"We promised the N73 earlier, but we found some memory issues, as it has a lower memory spec than other devices," says Kaidesoja. "That gives some headaches, but we'll deal with that, and will release for the device during the second quarter."
so clearly from here we can understand that something drastic is going to be done to the n73 yet again... to support the new n-gage platfrom and improve its performace.... why these improvements are never made to the e-series ?
PS : can anyone enlighten me on the processor specs for both n73 and e61i...
Message Edited by jananan on 02-Mar-2008 08:25 PM

VMS 2.3 Device package for 3800 Series

hi
We are having VMS 2.3 installed which is not able to monitor or to perform any operations on 3800 series routers.
How we can add device pack for 3800 series routers ?
And from where to download the pack ?

The device pack is available for download on Cisco.com and you can get it if you have correct licence. After downloading the pack stop the cisco works deamon manager service and and apply the pack.

Will ni-daq drivers for an E-series device work under WinXP?

I now use them to program the device using Visual C++ under win 98.

Hello
NI-DAQ 6.9.3 does provide support for XP and 98, so you most certainly can use it in XP with an E-series device.
Thanks
Bilal Durrani
NI
Bilal Durrani
NI

My Ipad 2 external speakers does not work and headphones has popping sound. This all occured at the same time as my Iphone and Ipod headphones only played mono (no, the "mono" option is not on). How can there be audio issue for all these devices?

My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?

Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie

Error message when saving for web and devices

I cannot save for web and devices for some reason. I get the error message shown in the screen shot below.
I'm using CS5 extended, version 12.1, 64 bit. My OS is windows 7.
It doesn't matter whether it's a JPG file or a PSD, I get the same error message, and I am unable to find a solution so far.

Hi,
See if this solution works (from this post):
regards,
steve
26. leonty16,
Jun 26, 2010 11:17 AM    in reply to turtle_
Report
FIXED .....
OK guys....I had this problem for the longest time & Whenever I tried to use "save to web" feature, I would get the same error.... after a lot of research & finally found a resolution.....
I wanted to take this opportunity to share the resolution why this feature was not working properly....
Here is the link where you will find what the problem was...
http://www.techsupportforum.com/microsoft-support/windows-vista-window s-7-support/235245-solved-error-1324-when-installing-applications.html
Basically, go to this registry location:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\U ser Shell Folders
& make sure that your current "my documents" sub folders are set to:
My Music       REG_EXPAND_SZ         %USERPROFILE%\Music My Pictures    REG_EXPAND_SZ         %USERPROFILE%\Pictures
My Videos      REG_EXPAND_SZ         %USERPROFILE%\Videos
Personal         REG_EXPAND_SZ         %USERPROFILE%\Documents
etc...etc...etc....
When I fixed my registry...this error went away & I had no problems with it anymore...please post this resolution on the website for others!

IPS SSP module vs standalone 4200 series devices

Looking at price to performance ratio it seems that the IPS SSP modules are the winner.
The 4200 series devices however has hardware bypass which can ensure traffic flow is not interrupted even if the power to the IPS goes down. How likely is it that a malfunction of the IPS SSP affects the work of the ASA?
We are looking at ASA5585X S20 with IPS SSP S20 or same ASA with IPS 4260.
Any and all input in terms of pros and cons you are aware of will be appreciated.

Yes, you can have the IDSM2 module in your CAT 6K. However, please check how much traffic will be traversing the IDSM2 module since you mention internal as well as traffic towards the internet. Please ensure that the performance of the internal traffic is not impacted. Also depends on whether you will be configuring the IPS in promiscuous or inline mode.
Here is the datasheet for IDSM2:
http://www.cisco.com/en/US/products/hw/modules/ps2706/products_data_sheet09186a00801e55dd.html
You might even want to bundle a few IDSM2:
http://www.cisco.com/en/US/prod/collateral/modules/ps2706/ps5058/product_data_sheet0900aecd804b91d7.html
Hope that helps.

I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this purchases. It worked, however, for another series. What can I do?

I had purchased and downloaded a tv series to my ipad. Then deleted it due to space constraints. Now I wanted to download it permanently to my MacBook but itunes does not show this purchases. It worked, however, for another series. What can I do?
Thanks for any help!

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad.
If you haven't synced to a computer them (from here) :
If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

Is the AT-MIO-16DE-10 an E series device?

I'm trying to reinstall labview and I'm not sure which option to select. The choices are the recommended one, the one for all non-E series devices, and neither, and there's a note at the bottom for which devices should use neither.

The AT-MIO-16DE-10 is an E Series device. Thus, I would pick the "recommended one" because that seems to apply to the E Series boards which are the regular boards produced by NI.
If you still have troubles, let me know what version of LV you are trying to reinstall.
L Aguila
Applications Engineer
National Instruments

Maemo / MeeGo for N series devices?

Similar Messages

Maybe you are looking for