Magenta cast ( strong) on Canon 9000 MKII

Question

After changing to a different paper all my pictures come out with a strong magenta cast . Really strong, as if no other color exist. Having profiled the printer again with ColorMunki the result is the same. Have gone through all the forums reporting a similar problem, I haven't found any workable solution. It is really strange that even Canon has no real answer, although the problem seems to exist for years...AND only with Canon. Have also an Epson R1800 and never encountered a problem.
Does anyone have a workable solution without having to buy "other" programs to solve the problem. Printing from PS 6 on Windows 7.  Any suggestion is welcome. Thanks !
P.S. All previous suggestions have been tried, but no luck. Have always been using own printer profiles generated by CM.

Answer 1

First, you must not let the printer set anything.  Turn off every bit off control it has.  You can do this with the Canon My Printer under the Printer Settings tab.  Do you know how?  I will guess, yes, for now but if you don't get back to me.
Second, you need to have your photo editor handle all the settings and color matching.  You know how to do this? I prefer Photoshop.
And lastly, it is essential you get some settings on your monitor that somewhat matches what the printer is printing.  Your printer may be doing exactly what you are telling it to do and you have no idea it is, because your monitor is off.  If you don't do this step, you can forget the other steps.  However, there are only a few things that you need to be concerned with.  You don't need any fancy extra add-ons to do this.  No additional sortware or gadgets, etc.
But you must get the grey-scale very close.  You need to get the brightness very close and you need the contrast very close.
After you do these things you can make adjustments to your prints by just looking at your screen.  Because you know the monitor and printer are on the same level.  One more point, you can NOT get a printer to print every color exactly the way you saw it.  It isn't possibile as all colors and adjustments effect all others.  My goal is to get the skin tones right.  That is what people notice most. Remeber you are dealing with two different disciplines here.  One is colored light and the other is colored dyes.  They are not the same thing.
For instance, I know my Pro-100 tends to print darker than what I see on the monitor (typical).  So, I automatically know to set it's prints 1/2 to one stop brighter in Photoshop, in my case.  It also prints with a slightly warn tone.  Most of the time, with protraits especially, this if OK but sometimes it is not.  In that case I adjust the "temp" setting slightly cooler in PS.
All the Canon photo printers I have ever seen have this warm/magenta cast.  Canon engineers must prefer this look.  It can not be changed.  You need to "fix" it in post.
Make sure you have the correct ICC profiles and you are using Canon brand ink and paper untill you get good with the printer.  Very, very important, otherwise you don't know if the printer is doing exactly what you are telling it to or not.
Important though is, use the USB connection until everything is right.  You are just adding another issue when you try to set up the printing and the wireless all at the same time.  Just like using Canon branded products until it is a go.  Use a real printer USB cable.  Not just any old USB cable.
EOS 1Ds Mk III, EOS 1D Mk IV, EF 50mm f1.2 L, EF 24-70mm f2.8 L,
EF 85mm f1.2 L II USM, EF 70-200mm f2.8 L IS II,
Sigma 120-300mm f2.8 EX APO, Photoshop CS6, ACR 9, Lightroom 6