Magic Bullet Instant HD Advance Is Tanking forever to render

Don't know if it normally takes this long to render in Adobe After Effects CS4.
I have a 64-bit sytem and I hardly got anything on my pc just a few music and music videos so its probably not the computer.
I must of done somthig wrong.Heres what I did.
I imported my 4:3 video then I draged the video under the project panel once i draged the video under the project panel it created a new comp.
I double click it and it open in the timeline panel then i selected the time panel by pressing ctrl+k the new com press setting opend and in the comp I set the resolution to 1920x1080 and the aspect ration to square pixels.Then I scale the video till it fit the comp.
After I did all that I added magic bullet instant hd advance to the video.I set the output to HDTV 1080 ( 1920X1080 ) so that it maches.
It's been it's now 2 hours and still it's rendering.It's says that it's rendering 1 of 2 what's that about?
Does it render with the plug-in and with out?
Anyways if someone reads all this can u tell if I did anything wrong.If so explane what I did wrong and how to do it right.

it frezes up and pauses threw out the whole video eveytime.
don't know why it does that when i upscaled the video without magic bullet the video was blurry but when i added magic bullet instant hd advance the video wasn't blurry anymore instad the keeped frezing and pauseing.

Similar Messages

Problam with magic bullet instant hd advance

after i changed my sd video to 1080p and added magic bullet instant hd advance i set it so that it renders in h.264 codecs but every time i tryed i got this message.

The H.264 format only permits a limited, constrained set of frame sizes. In After Effects CS4, these constraints were communicated in the Comments field of the H.264 Export Settings dialog box, and you must follow those instructions or else get the error message that you got.
In After Effects CS5, if your settings don't match one of the sets of settings allowed by the H.264 specification, then a warning icon in the Output Module Settings dialog box appears, and After Effects tells you what it's going to do to make the video fit.
The F4V format (which contains video encoded using H.264) has a different set of constrained sizes, including the 1920x1080 size that you're looking for. And other formats (like QuickTime) aren't constrained in this way at all. So, you might have better success choosing a different output format, if you need that output frame size.

Rendering with magic bullet instant hd advance

i'm trying to change the video resolution on my sd videos to 1080p hd.
what is the best way to do so to get the best results??
the quailty on my sd videos are good.I just wanna make them 1080p and if possiable make the quailty even bettter with magic bullet instant hd advance.

You can't spin hay into gold, so have realistic expectations of what a plug-in can do.
The Red Giant website has a few before and after clips. (But keep in mind, these are best case scenarios) I have had mixed results with Instant HD. It's not a miracle Easy Button.
Here's something I've wanted to test: capture video with a Blackmagic/AJA board and an upscaling DVD player (like a PS3), using 1080i and analog component connection. PS3 has one of the best consumer hardware upscalers available. Hmmmm... maybe I'll try it this weekend. I'll post my results

Blue Screen When using Magic Bullet Instant HD in Premiere Pro CC

When using Adobe Premiere Pro CC, using Magic Bullet Instant HD to convert a 720p video to a 1080p. The system will blue screen and the problem dll file seems to be hal.dll.
What is the cause of this?
and how to fix it?
System Specs:
OS: Win 7 Ultimate 64 bit
CPU: i7 3770k 3.5 Ghz
RAM: 16 GB
GRAPHICS: AMD Radeon HD 7700
MOTHERBOARD: ASRock Z77 Extreme6
STORAGE: 1 TB local disk, 3 2TB Expanded driver attached to 3.0 port
Wireless mouse and keyboard

Hi Kris,
I have checked all the three dumps, they all showed the same bugcheck 124.
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 124, {0, fffffa8010821028, be200000, 21136}
Probably caused by : GenuineIntel
Followup: MachineOwner
6: kd> !analyze -v
* Bugcheck Analysis *
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa8010821028, Address of the WHEA_ERROR_RECORD structure.
Arg3: 00000000be200000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000021136, Low order 32-bits of the MCi_STATUS value.
Debugging Details:
BUGCHECK_STR: 0x124_GenuineIntel
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: Adobe Premiere
CURRENT_IRQL: f
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
STACK_TEXT:
fffff880`0350ab58 fffff800`03413a3b : 00000000`00000124 00000000`00000000 fffffa80`10821028 00000000`be200000 : nt!KeBugCheckEx
fffff880`0350ab60 fffff800`035d6463 : 00000000`00000001 fffffa80`10817950 00000000`00000000 fffffa80`108179a0 : hal!HalBugCheckSystem+0x1e3
fffff880`0350aba0 fffff800`03413700 : 00000000`00000728 fffffa80`10817950 fffff880`0350af30 fffff880`0350af00 : nt!WheaReportHwError+0x263
fffff880`0350ac00 fffff800`03413052 : fffffa80`10817950 fffff880`0350af30 fffffa80`10817950 00000000`00000000 : hal!HalpMcaReportError+0x4c
fffff880`0350ad50 fffff800`03412f0d : 00000000`00000008 00000000`00000001 fffff880`0350afb0 00000000`00000000 : hal!HalpMceHandler+0x9e
fffff880`0350ad90 fffff800`03406e88 : 000007ff`fda7f140 00000000`00000b40 00000000`00000000 00000000`00000000 : hal!HalpMceHandlerWithRendezvous+0x55
fffff880`0350adc0 fffff800`034be4ac : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : hal!HalHandleMcheck+0x40
fffff880`0350adf0 fffff800`034be313 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KxMcheckAbort+0x6c
fffff880`0350af30 00000000`0352f2c9 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiMcheckAbort+0x153
00000000`36c0cdd0 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x352f2c9
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: GenuineIntel
IMAGE_NAME: GenuineIntel
DEBUG_FLR_IMAGE_TIMESTAMP: 0
IMAGE_VERSION:
FAILURE_BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
BUCKET_ID: X64_0x124_GenuineIntel_PROCESSOR_CACHE
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x124_genuineintel_processor_cache
FAILURE_ID_HASH: {270f58cb-a20a-a72d-6d81-eb8c82f01f7a}
Followup: MachineOwner
Information for Bugcheck 124:
Bug Check 0x124: WHEA_UNCORRECTABLE_ERROR.
Bugcheck 124, This bug check indicates that a fatal hardware error has occurred. This bug check uses the error data that is provided by the Windows Hardware Error Architecture (WHEA).
Which is probably caused by "GenuineIntel". Make sure we have updated the BIOS drivers, take a check with the hardware tool provided by the manufacturer, or you may take a check with them.
Best regards
Michael Shao
TechNet Community Support

Magic Bullet Instant HD Converter

Hi Gang
I downloaded the trial version of this HD converter, but I don't really know yet if it's worth it. I always thought there was no way in the world anything like this would really work. In a sense I guess all it does is perhaps enhance standard def footage. It can never create something that wasn't there in the first place.
Does anyone have any opinons or results using this software???
http://www.redgiantsoftware.com/products/all/magic-bullet-instant-hd/
Thanx
Mike

Hey ttom
Thanx for this - this program is cheaper than the Magic Bullet program. But is it for a MAC or PC? Wonder if it's as good? But it sure looks easy to use.
How bout this one;
http://www.applemacvideo.com/mac-video-converter.html#179
Anyone else out there have any experience with the Magic Bullet HD converter?

Anyone else is having problems with magic bullet instant hd 1.2?

i've tried to download the trial from there website but it had a virsus and i couldn't install the trial cuz my norton block it.
did anyone eles had this problem?

I just installed Instant HD onto two different systems with PPro CS5 5.0.2, and Instant HD 1.2 isn't working on either one. It gives me an error, then crashes PPro. I sent a bug report to Red Giant, but I haven't heard back yet.
Something is up with the plugin...seems to work fine in AE.
As for internet access, I don't have antivirus software on my edit machines, but I also can turn off and on the internet connection. I just keep it off most of the time...

Rendering times - Magic Bullet & Nattress

I love the fact that Nattress works inside of FCP, but before I buy I'd like to hear about rendering times. Up til now, I've been using Magic Bullet. How do the two stack up, in terms of time they take overall to get to the finish line?

I performed just those tests and reported my findings here:
www.lfhd.net (near the bottom).
I put a bleach bypass filter form both sets onto a 41 second DVCPRO HD footage. MB took 22 min, Nattress took 7 min. But I expected that. Nattress has a reputation for not only quality, but speed.
THEN I received a copy of Magic Bullet Editors 2 which I was told would render faster. And it did. Same bleach bypass filter took 7:55. But take note, render speeds are not only processor based with MBE2, but also graphics card based.
MBE2 is $349, or $99 if you bought MB AFTER July 2005. Nattress is still $99, and still faster.
Shane
"There's no need to fear, UNDERDOG is here!"

Magic Bullet Editors & Deinterlacing

hi all,
i just picked up Magic Bullet Editors for a big project i'm working on in FCP 5. my question is, what's the best stage to apply MBE and when to deinterlace?
a) in the main timeline, apply colour correction, MBE and deinterlace each shot?
b) in a nested sequence (after CC and MBE each shot), deinterlace entire subclip?
c) in Compresser, deinterlace using Frame Controls?
also, is the FCP Deinterlace filter the best way to go? what about Shift Fields, or one of Joe's Filter's?
FYI, the footage is from an old four year old Sony MiniDV camera (not my choice) and i'm working on a pretty tight budget, so i can't really afford any bigger, more expensive toys.
thanks in advance,
Craig

I too can confirm that MBE 2 works with FCP 6.
And as for FCE...you gotta ask that in the FCE forum.
Shane

Which Magic Bullet.

There seems to be a few magic Bullet editors on sale,
Red Giant Magic Bullet editors
Red Giant Magic Bullet Suite
Red Giant Magic Bullet Suite Unlimited Bundle
Red Giant Magic Bullet Suite Render Unlimited
Red Giant Magic Bullet Suite Upgrade
Red Giant Magic Bullet Bundle
The editors is chaper but I dont wanna buy that on eto find out that I have to spend more money on it going forward. Any ideas which one to get?
Daz

Editors is an add-on for Final Cut Pro, Premiere and a couple of others. Suite is for After Effects only, with a few extra tools for 24p conversion. I don't know about the others.
But Red Giant's site is not showing these any more. They are only offering Magic Bullet Looks and Magic Bullet Colorista. These are more advanced tools so it looks like the others might have been discontinued.

I am having problem when I am installing magic bullet look 1.4 please help

Hi, I am having an issue with my Red giant magic bullet look 1.4
When I am installing this plug ins I receive a message saying: your graphic card did not meet the minimum requirement but actually my graphic card did meet the requirement and I was looking at the requirement for this in website and my Gcard met the requirement. Why is it not installing?
please help me
I use premiere pro CS3
Win 7 OS 64bit
My graphic card is: NVIDIA GeForce 9800 GT (Microsoft corporation-WDDM v1.1)
The minimum requirements for the plug ins are: Magic Bullet Looks supports a wide range of cards from both ATI or NVIDIA. For ATI cards, we require a 9600 XT or greater, or an X series card starting with the X700 series. Cards with greater model numbers and at least 128 MB of RAM can run the Looks engine.
For NVIDIA cards, we support the 6600 model and higher or QuadroFX 1300 and up. Cards with higher model numbers and a minimum of 128 MB of RAM can run Looks. For users working with HD images, we require that the video card have at least 256 MB of RAM. In all cases, we suggest using the latest video drivers for your graphics card.
Please Note Since all media is processed at 32 bit, you will absolutely need a 256 MB graphics card or larger. For newer cards from ATI and NVIDIA, we recommend a minimum of 320 MB of RAM. For 2K projects, we recommend 512 MB or a larger amount of RAM on the graphics card.

Run this.
http://www.maxon.net/downloads/cinebench/cinebench-115.html
Report back the results.

Red line with Magic Bullet Looks

Magic Bullet Looks in the Video Effects panel shows as a 32 GPU accelerated effect.
However, when I add it to a clip in timeline one, two or three, I go from no lines (including yellow) to a red line above that clip.
If it's a GPU accelerated effect why am I seeing a red line above the clip when I add that effect?
My card is a 285 that works fine with everthing else.

Magic Bullit Looks is not a accelerated effect, so that is why you are seeing the red line.
Effects with the icon on the left are accelerated.

PP CS4 crash - because of magic bullet stabilizer??

I'm using PP CS4 and I have a wedding video that I've been working on and it all of the sudden crashed on me. I used time machine to pull up an older version which opened fine but I lost the hours of work I put in. So I tried again to open the file that crashed and it worked. I sent it to the media encoder to render out but woke up to an "unknown error" message. I'm back to being unable to open the file with all the work.
My hunch is that the problem is an effect, more specifically Magic Bullet Stabilizer. This is only a guess but I remember it acting funny when I dropped it on the video layer. (It didn't seem to work and it would freeze up a little.) I could be wrong, other effects I'm using are Magic Bullet Denoiser and a bunch of standard color effects.
When I try to open the file I see what looks like chopped up pieces of an error message and my desktop background in the project window and then it crashes. I'm unable to do anything before PP crashes.
If anyone can help, please do...
Thanks...

Hi there,
I have seen crashes using Magic Bullet Denoiser in Premiere Pro CS5. Red Giant says Denoiser is currently unsupported for CS5, and I assume that goes the same for CS4. The Denoiser compatibility notes are here:
http://www.redgiantsoftware.com/products/all/magic-bullet-denoiser/compatibility/
Unfortunately, I don't have compatibility info on Magic Bullet Steady for CS4. I know it is discontinued for CS5. Perhaps you could contact Red Giant directly to ask them. Even better, if you could post back your results for other users who may have the same question.
Cheers,
Zac

After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

Hi,
I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
I am running:
MacBook Pro
OS 10.9.4
Processor 2.3 GHz Intel Core i72.3 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Cuda 6.0.54
The footage is Apple Quicktime ProRes HQ
I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
I am at a loss as of how to fix or even work around this. Any help would be appreciated.
Thanks

There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

Adobe premiere pro cc 2014 freezing with magic bullet looks

Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-Lok

I don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

Magic Bullet Instant HD Advance Is Tanking forever to render

Similar Messages

Maybe you are looking for