Magic Bullet Looks plugin problem

Hi everyone!
I installed MB Looks for FCP. FCP does not show/detect the plugin. So I am wondering - is there a specific plugin folder where all the effects are kept for FCP to check what is going on?
Thanks!
Jo

look in the Effects menu in FCP and select "all" effects in case it isn't showing them to you.
look in root drive (usually Macintosh HD) Library>Application Support>Final Cut Pro System Support>Plugins

Similar Messages

Photoshop crash when i use Magic Bullet Looks

Hello, good, I need help because I have been dating a message to start photoshop, which tells me card graphics is not supported, and attempting to open a plugin, such as Magic Bullet Looks, to put ok, shut me photoshop, and this had not happened to me before, what can i do?
i have WIN 7
Intel core (TM) i7 2.00 GHz
6 gb of ram
64 bits

I did a quick google search for "Magic Bullet Looks plugin" The first one I found does not even seen to be a Photoshop Plug-in Is this the plug-in your trying to use in Photoshop? Seems to be for video editing software. Photoshop can do limited video editing but is not listed as supported by this plugin.
Red Giant - Products - Magic Bullet Quick Looks Free 1.4
System Requirements
Quick Looks Free works with:
Adobe After Effects CC, CS6, CS5.5, CS5
Adobe Premiere Pro CC, CS6, CS5.5, CS5
Apple Final Cut Pro 6, 7

XML Crashing FCP while importing. Magic Bullet Looks could be the problem

Hi All,
Need a little help here.
I am using FCP 6.0.5 on a power mac G-5.
I am trying to open an XML which was exported out of FCP 7 as a version 4 XML.
Magic Bullet Looks is being used on the project, and I think this is were the problem is.
when importing the XML it crashes FCP when I select the Include Video/Audio Effects.
When I import the XML without this option selected it opens fine.
I have MB Looks Installed on machine, so the Plugins are there.
Just wanted to see if anyone has dealt with this issue or might have any insight to the problem.
I can post the Crash info on the specific thread if that can help.
Thanks!

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

When ever i try to use magic bullet looks it says that it could not complete the command because of a problem with the filter module interface what do i do to fix that please help

i dont know what the problem is everything else works my photoshop runs really well its just when i try to use magic bullet looks then it gives me the error message

Contact Red Giant and see if they have an update to the plugin that fixes the bugs in the plugin that are preventing it from working correctly.

Photoshop cc problem with Magic Bullet Looks 2 !

I am having trouble with using Red Giants' Magic Bullet photolooks 2 plugin with PS CS6 (32&64).
The standalone program works fine on its own but fails to launch properly from PS's filter menu. It tries to launch the app but then reports an error Sorry, an error occurred (12288), Corrupted memory profile, then an error Can't open dest profile. These errors can't be cleared except by going into task manager to kill the app. Photoshop reports the error as LooksBuilder failed to launch. Please ensure the application has not been renamed or moved from the install location and then Could not complete the Photolooks command because of a problem with the filter module interface.
Please Help
i heard that the fix is by the color management , but i dont know how

Disable those plugins until you can get an update from the plugin manufacturer. Just change the name of the folder they're in to start with ~ and relaunch Photoshop.
Also, the magic bullet looks have nothing to do with color management.

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

Probleme final cut pro x -magic bullet look 2

Bonjour, je travaille avec un tout nouveau imac, 16Go de ram, carte graphique de 1 Go, dessus il y a snow leopard 10.8.2, et j'ai un probleme de compatibilité avec magic bullet look 2 qui génére des images vertes et fonctionne lentement. Peut on m'aider

C'est un problème qui est déjà connu d'incompatibilité avec 10.0.6.
Je crois que la seule solution c'est d'attendre une mise à jour par Red Giant.
Il ya eu de plusieurs discussions sur ce sujet:
https://discussions.apple.com/thread/4475636?start=0&tstart=0
https://discussions.apple.com/message/20151907#20151907#20151907
et autres.

I am having problem when I am installing magic bullet look 1.4 please help

Hi, I am having an issue with my Red giant magic bullet look 1.4
When I am installing this plug ins I receive a message saying: your graphic card did not meet the minimum requirement but actually my graphic card did meet the requirement and I was looking at the requirement for this in website and my Gcard met the requirement. Why is it not installing?
please help me
I use premiere pro CS3
Win 7 OS 64bit
My graphic card is: NVIDIA GeForce 9800 GT (Microsoft corporation-WDDM v1.1)
The minimum requirements for the plug ins are: Magic Bullet Looks supports a wide range of cards from both ATI or NVIDIA. For ATI cards, we require a 9600 XT or greater, or an X series card starting with the X700 series. Cards with greater model numbers and at least 128 MB of RAM can run the Looks engine.
For NVIDIA cards, we support the 6600 model and higher or QuadroFX 1300 and up. Cards with higher model numbers and a minimum of 128 MB of RAM can run Looks. For users working with HD images, we require that the video card have at least 256 MB of RAM. In all cases, we suggest using the latest video drivers for your graphics card.
Please Note Since all media is processed at 32 bit, you will absolutely need a 256 MB graphics card or larger. For newer cards from ATI and NVIDIA, we recommend a minimum of 320 MB of RAM. For 2K projects, we recommend 512 MB or a larger amount of RAM on the graphics card.

Run this.
http://www.maxon.net/downloads/cinebench/cinebench-115.html
Report back the results.

Render Problem with Magic Bullet Looks

Can't render effects from Magic Bullet Looks with Final Cut Pro. I receive this error message: 'The effects looks failed to render: your hardware cannot render at the requested size and depth.'
However, it renders fine with CS4.
The graphics card I have is the ATI RADEON HD 2600 XT. 256MB
All this is on the same computer.
Any suggestions?

Did anyone know?

After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

Hi,
I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
I am running:
MacBook Pro
OS 10.9.4
Processor 2.3 GHz Intel Core i72.3 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Cuda 6.0.54
The footage is Apple Quicktime ProRes HQ
I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
I am at a loss as of how to fix or even work around this. Any help would be appreciated.
Thanks

There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

Adobe premiere pro cc 2014 freezing with magic bullet looks

Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-Lok

I don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

Crash upon return to FCP from Magic Bullet Looks

Problem:
MacPro 2.8Ghz, Early 2008, Nvida 8800GT GFX Card, FCS3, Decklink HD 10.6.4, Magic Bullet Looks 3, ProRes 1080 footage cut on ProRes 720 timeline.
After returning from placing a grade on a clip in Looks, at the first click of the mouse inside FCP, the whole app crashes. Digital Rebellion - Crash Analyzer says is a Graphics Cards/ Driver issue and the crash is related to quick draw!.
Everything on the System is updated.
I don't believe that the GFX card needs to be updated and work on other suites using older hardware and don't have this issue.
Anyone know anything more as to why this would be happening?

Hi -
Check this out - it restored functionality for me (don't know if this is the latest info, this is the link I had on file):
http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/ 175/
MtD

Why does Magic Bullet Looks not work

Help,
I am having troubles with the plugin Magic Bullet Looks working with FCP X. I understand it is up to Apple to update and fix this.
Andy news on this issue?
Tjapko

Don't have the plugin.
http://www.apple.com/feedback/finalcutpro.html
Or: bugreport.apple.com if you have a developer account...

Magic Bullet Looks is fixed...

For those of you who use Magic Bullet Looks, you may have noticed that it didn't work so well with CS4 - no preview image. Well, Red Giant released an update today. So far, it works great. I did catch one little bug in that you need to have the play head over the clip you select to edit in Looks, otherwise the preview image will be where ever the play head is.
If you're like me, this is good news...I've really grown to depend on Looks.

Yeah I beta tested it Looks when it came out and they were pretty adamant about not being able to move the preview around. Evryone in the beta asked for it but they layed down the law and said: Basically, it's not gonna happen so stop asking. Guess it's in the coding or something.
Micah from Red Giant and Stu have said over and over that Colorista is for matching all your clips's color for a scene then Looks is meant to be applied as an over all correction for a scene. This would work better if Premiere had adjustment layers. It was never meant to be a single clip corrector, even though I find myself using the Lens effects (like the awesome swing/tilt, edge softness and grad) for single clips.
They did say that scrubbing in looksbuider might happen for version 2.0 but it's not in google color correction beta group right now. So I don't expect it to happen any time soon.
Eric, are you saying that it picks a random frame from the clip for your preview. That's not the way it's supposed to work. In fact doesn't that kinda negate the reason for keyframing looks?
It's always pulled up the frame the CTI is over. If the CTI isn't over the clip then it pulls up the first frame. Works the same way in AE. If it doesn't work that way for you there's some sort of problem. I'm looking at it right now on Premiere CS4 and it's working for me.

Adjustment layer and Magic Bullet Looks corruption

I often find using the adjustment layers to apply colour correction an easy trick and therefore love the concept.
However, I've recently noticed that PP CS6.0.2 does not like MB Looks to be applied to adjustment layers all that well.
On two recent projects, the primary sequence has become corrupt (PP loads and quits immediately) and I have to recover the edit by copying the none adjustment layer tracks to a new sequence and then relinking the media.
Today, I spent 4 hours recovering another complex sequence and wanted to know if any other person has had a similar experience applying MB Looks to an adjustment layer?
A word of warning to others who might be thinking of the same 'trick'.
Perhaps I am expecting too much of the adjustment layer concept.
Thanks for any responses.
J.

I found myself here because... I was trying to open last saved project and it just crashes.
I did use Magic Bullet "Looks" and "Cosmo" on both footage and adjustment layers.
"Panic... Drink Coffee" !!!!! idea !!!!
Uninstall Magic Bullet
Launch CS6APP
Open same project file warning you don't have plugins installed.
Delete the "Adjustment Layers" (you won't be able to get the adjustment layer settings back but, you will get the edit back
Save project "new name"
Re-install plugins
Re-open CS6APP
"new name" project file opens fine without the adjustment layers.
But wait!!! Why should you uninstall Magic Bullet?????
Open a new project
Import entire project file into new project
Go to media bin and delete the "adjustment layers"
Find last Sequence that had the adjustment layers and you can go back to working
We put finishing effects on entire or even sections of full edit
1. Select edit < New Sequence from clip... apply effects on new sequence
2. Not "adjustment layers" BUT!!
2. Right now I found this just be an issue with RedGiant plugins I'm going to pass this post along to them..
This is a link to our project we had this happen too. (Sound tweaking)
Superfine Bakery : Who we are on Vimeo
CS6APP 6.0.5
MacBookPro Retina 16 gigs of ram
Thunderbolt 2 drive with source
USB 3 drive writing scratch
(2) external monitors attached

Magic Bullet Looks plugin problem

Similar Messages

Maybe you are looking for