MAGIC BULLET LOOKS

anyone tried it with final cut express 4 yet? curious to see if it would work since they implemented the FXplugin.

i am going to.. my copy of final cut express 4 is in the mail.. hasnt got here yet.. thanks for the response though.. =] do you use it with no problems?

Similar Messages

  • I am having problem when I am installing magic bullet look 1.4 please help

    Hi, I am having an issue with my Red giant magic bullet look 1.4
    When I am installing this plug ins I receive a message saying: your graphic card did not meet the minimum requirement but actually my graphic card did meet the requirement and I was looking at the requirement for this in website and my Gcard met the requirement.  Why is it not installing?
    please help me
    I use premiere pro CS3
    Win 7 OS 64bit
    My graphic card is: NVIDIA GeForce 9800 GT (Microsoft corporation-WDDM v1.1)
    The minimum requirements for the plug ins are: Magic Bullet Looks supports a wide range of cards from both ATI or NVIDIA. For ATI cards, we require a 9600 XT or greater, or an X series card starting with the X700 series. Cards with greater model numbers and at least 128 MB of RAM can run the Looks engine.
    For NVIDIA cards, we support the 6600 model and higher or QuadroFX 1300 and up. Cards with higher model numbers and a minimum of 128 MB of RAM can run Looks. For users working with HD images, we require that the video card have at least 256 MB of RAM. In all cases, we suggest using the latest video drivers for your graphics card.
    Please Note Since all media is processed at 32 bit, you will absolutely need a 256 MB graphics card or larger. For newer cards from ATI and NVIDIA, we recommend a minimum of 320 MB of RAM. For 2K projects, we recommend 512 MB or a larger amount of RAM on the graphics card.

    Run this.
    http://www.maxon.net/downloads/cinebench/cinebench-115.html
    Report back the results.

  • Red line with Magic Bullet Looks

    Magic Bullet Looks in the Video Effects panel shows as a 32 GPU accelerated effect.
    However, when I add it to a clip in timeline one, two or three, I go from no lines (including yellow) to a red line above that clip.
    If it's a GPU accelerated effect why am I seeing a red line above the clip when I add that effect?
    My card is a 285 that works fine with everthing else.

    Magic Bullit Looks is not a accelerated effect, so that is why you are seeing the red line.
    Effects with the icon on the left are accelerated.

  • After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

    Hi,
    I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
    I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
    On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
    I am running:
    MacBook Pro
    OS 10.9.4
    Processor  2.3 GHz Intel Core i72.3 GHz Intel Core i7
    Memory  8 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6750M 1024 MB
    Cuda  6.0.54
    The footage is Apple Quicktime ProRes HQ
    I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
    I am at a loss as of how to fix or even work around this. Any help would be appreciated.
    Thanks

    There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

  • Adobe premiere pro cc 2014 freezing with magic bullet looks

    Hi-
    I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it.  The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable.  Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved.  I've already done hours and hours of editing in 2014 only to keep having crashes.
    Is anyone looking into this or has any recommendations so I can get work done.
    Thanks!
    -Lok

    I don't use magic bullet Looks but is that a 3rd party plugin?
    If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

  • I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

    I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

    What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
    What are the audio settings?
    What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
    If possible, post screenshots of the inspector for the project.
    It could be related to the audio frequency?

  • XML Crashing FCP while importing.  Magic Bullet Looks could be the problem

    Hi All,
    Need a little help here.
    I am using FCP 6.0.5 on a power mac G-5.
    I am trying to open an XML which was exported out of FCP 7 as a version 4 XML.
    Magic Bullet Looks is being used on the project, and I think this is were the problem is.
    when importing the XML it crashes FCP when I select the Include Video/Audio Effects.
    When I import the XML without this option selected it opens fine.
    I have MB Looks Installed on machine, so the Plugins are there.
    Just wanted to see if anyone has dealt with this issue or might have any insight to the problem.
    I can post the Crash info on the specific thread if that can help.
    Thanks!

    Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
    R

  • I am not able to use Magic Bullet Looks with the After Effects trial

    Jeff,
    I am having troubles with downloading a trial. I am currently trying to find ways to edit videos using Magic Bullet Looks. I have found many ways, but when I go to download the Magic Bullet looks, it says After Effects cs6. For some reason it does not install even though I have the trial version of After Effects. So when I open After Effects, and go to the effects tab, it does not show up. I have looked on tutorials and many other ways.
    I also tried downloading the trial of After Effects at, http://prodesigntools.com/adobe-cs6-direct-download-links.htmlrfer
    Please Help,
    - jhsurfer

    If you're having difficulty installing or using Magic Bullet Looks, then I recommend asking the folks who make that plug-in, Red Giant:
    http://www.redgiant.com/products/all/magic-bullet-looks/

  • Magic Bullet Looks Error in After Effects CC 2014 (Latest)

    My PC specs:
    Windows 7 Home Premium
    Processor: Intel(R) Core(TM) i3-2350M CPU @ 2.30Hz  2.30Hz
    RAM: 4.00GB
    System Type: 64-Bit
    This is for Adobe(R) After Effects(R) CC - 2014.1.1 Release (Version 13.1.1.13
    I didn't get this issue when i was using Adobe After Effects CC (Version 12.2) instead of After Effects CC 2014 (Version 13.1.13)
    Here is the issue:
    When i add Magic Bullet Looks onto my clip and then press edit:
    Gyazo - a978019a26d81a694b2eb7c7b222c333.png
    It brings up the "Looks Builder" window:
    Gyazo - 0c5413ac656bc4f251053331b455f635.png
    After i hover over or click on a preset from the "Looks" tab and then after effects says "Not Responding" and I also get an error message saying "After Effects error: crash occured while invoking effect plug-in "Magic Bullet Looks.":
    Gyazo - d20bd9ad8215288401e7194ccc2e75d4.png
    Please respond as soon as possible
    Thank you,
    Thifyan123

    By the way i am extremely sorry for my the name "Jimmy Savile" it was my friend who did it . And I don't know how to change it. I'm sorry if it offends you.

  • Render Problem with Magic Bullet Looks

    Can't render effects from Magic Bullet Looks with Final Cut Pro. I receive this error message: 'The effects looks failed to render: your hardware cannot render at the requested size and depth.'
    However, it renders fine with CS4.
    The graphics card I have is the ATI RADEON HD 2600 XT. 256MB
    All this is on the same computer.
    Any suggestions?

    Did anyone know?

  • Slow loading of magic bullet looks

    Hello. I have GeForce GTX 670M video card and 32 GB of ram. Running on Windows 7 64 bit. Everytime i try to use the effect Magic Bullet Looks. I never get to see the image. It always loads slow and shows black background like pic below
    Anyone know what settings to change to make it work

    In addition to Peru Bob's hints (update the drivers, try to go back to when it worked, if at all), here's what I'd do:
    clear Premiere Pro and MBL preferences (and try again)
    create a new user ID on the system, try it from that user ID
    check Red Giant forums to see if anyone else has a similar issue; post it if not
    open a support ticket with Red Giant for the issue.

  • How can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

    how can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

    That model MBP gives you a choice of cards to use – one at a time. it is not designed for them to run in tandem - splitting up the workload.
    Russ

  • Crash upon return to FCP from Magic Bullet Looks

    Problem:
    MacPro 2.8Ghz, Early 2008, Nvida 8800GT GFX Card, FCS3, Decklink HD 10.6.4, Magic Bullet Looks 3, ProRes 1080 footage cut on ProRes 720 timeline.
    After returning from placing a grade on a clip in Looks, at the first click of the mouse inside FCP, the whole app crashes. Digital Rebellion - Crash Analyzer says is a Graphics Cards/ Driver issue and the crash is related to quick draw!.
    Everything on the System is updated.
    I don't believe that the GFX card needs to be updated and work on other suites using older hardware and don't have this issue.
    Anyone know anything more as to why this would be happening?

    Hi -
    Check this out - it restored functionality for me (don't know if this is the latest info, this is the link I had on file):
    http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/ 175/
    MtD

  • Why does Magic Bullet Looks not work

    Help,
    I am having troubles with the plugin Magic Bullet Looks working with FCP X. I understand it is up to Apple to update and fix this.
    Andy news on this issue?
    Tjapko

    Don't have the plugin.
    http://www.apple.com/feedback/finalcutpro.html
    Or: bugreport.apple.com if you have a developer account...

  • Does Magic Bullet Looks works with FCP X?

    Hi guys, does magic bullet looks or mojo work with FCP X?

    http://www.redgiantsoftware.com/blog/2011/06/24/final-cut-pro-x-and-red-giant/

  • Magic Bullet Looks is fixed...

    For those of you who use Magic Bullet Looks, you may have noticed that it didn't work so well with CS4 - no preview image. Well, Red Giant released an update today. So far, it works great. I did catch one little bug in that you need to have the play head over the clip you select to edit in Looks, otherwise the preview image will be where ever the play head is.
    If you're like me, this is good news...I've really grown to depend on Looks.

    Yeah I beta tested it Looks when it came out and they were pretty adamant about not being able to move the preview around. Evryone in the beta asked for it but they layed down the law and said: Basically, it's not gonna happen so stop asking. Guess it's in the coding or something.
    Micah from Red Giant and Stu have said over and over that Colorista is for matching all your clips's color for a scene then Looks is meant to be applied as an over all correction for a scene. This would work better if Premiere had adjustment layers. It was never meant to be a single clip corrector, even though I find myself using the Lens effects (like the awesome swing/tilt, edge softness and grad) for single clips.
    They did say that scrubbing in looksbuider might happen for version 2.0 but it's not in google color correction beta group right now. So I don't expect it to happen any time soon.
    Eric, are you saying that it picks a random frame from the clip for your preview. That's not the way it's supposed to work. In fact doesn't that kinda negate the reason for keyframing looks?
    It's always pulled up the frame the CTI is over. If the CTI isn't over the clip then it pulls up the first frame. Works the same way in AE. If it doesn't work that way for you there's some sort of problem. I'm looking at it right now on Premiere CS4 and it's working for me.

Maybe you are looking for