Magic bullet plugins premier

Hola a todos.. tengo una duda y les agradecería mucho si pudieran ayudarme con esto.
Instalé premier Pro y magic bullet Looks.. primero no me reconocia el looks por mi capacidad gráfica. Partí a comprarme un Tarjeta de Video (gráfica), ahi pude abrir el Looks. pero mi problema es que en el "builder" hago todos los cambios que deseo, presiono Ok, y la pantalla de previsualización del proyecto queda en BLANCO.. como que si estuviese bloqueado el efecto. Yo creo que debe ser alguna configuración, porque cuando en el control de efectos desactivo el "Looks" vuelvo a ver la pelicula.
Por favor agradecería si pudiesen ayudarme con esto, o alguna orientación.
Saludos

Hola, Daniel:
¿Conseguiste resolver el problema? A mí me está pasando exactamente lo mismo.
Por favor, si has averiguado algo nuevo, dímelo.
Gracias.

Similar Messages

Magic Bullet plugins and FCP

I'm trying to resurrect an old project, wherein I'd used my Magic Bullet plugins. That was two or three versions of FCP ago. My FCP 6.06 says it can't 'load' the MB plugins for this resurrected project. I check the FCP Plugins folder and they are there - along with my Nattress filters etc., in a folder marked:
Magic Bullet Editors FCP +(k)
Perhaps the protocol has changed. I've changed houses and studios at least three times since I made that film, and can't find my MB manual and whatever info might help me to reconnect plugin to project.
Any suggestions would be most appreciated...
Ben

I'm just thinking I could get a lot of the same effects using Color, couldn't I? I remember a bunch of presets in Color that reminded me of the Magic Bullet stuff.
I'm off to check that ... though I'd have to redo the color corrections from scratch ... but I've been meaning to start using Color for awhile; time to start...
B

Anyone familiar with Magic Bullet software??

If so, I have a question. With all the new cameras that have features such as "cine-gamma" and more detailed control over color and image, is it necessary to even purchase/use something like MB anymore? I was interested in it at some point in the past, seeing as how the filters could help you achieve the elusive "film look." But, it seems these new cameras have that issue covered by processing it for a "film look" as they record, instead of you trying to fix it in post with MB.
Anyone had experience with MB and/or new cameras mentioned (Panasonic DVX100, for example)? I'd like to hear your thoughts. I'm beginning to look at new cameras; I've had my XL1 for nearly 6 years now, and although it's still a workhorse and still going, I'm liking what I'm seeing on the market.
Thanks,
Sean Kirkland

I have the Magic Bullet Movie Looks plugins. I also use a Sony HVRZ1U (which does NOT have true 24P) and tonight, as a matter of fact, I'm doing a shoot using a DVX100.
I'll say this: If you use the Magic Bullet plugins, prepare yourself for VERY LONG rendering times. Applying one of their plugins to even a small piece of footage almost quadruples rendering times. Unless you have a RAID 0 and lots of RAM or you're only doing a small piece...well, there it is.
The piece I'm doing tonight is, in fact, going to only be about 7 minutes total when finished, and I may actually apply some Magic Bullet to this piece when it's all finished. It's a promotion for a cigar company, and I think a certain look coupled with the the DVX100 may be pretty cool. In a way, your post is actually what got me thinking about this, so thanks!
I hope I've helped you in some way.
Gman

Magic Bullet Denoiser II Plugin Not Showing Up in Effects Panel on CS5.5

Very bizarre. I have Looks working, as well as a trial of Neat Video.
I have tried holding down SHIFT to reload the plugin cache.
I have tried reinstalling Denoiser II , including older versions of it.
Of note: Reviewing the Plugin Loading Log shows the following:
Loading C:\Program Files\Adobe\Common\Plug-ins\CS5.5\MediaCore\Magic Bullet Denoiser\Denoiser2-64.aex
Loading from disk...
No loaders recognized this plugin, so the plugin is set to Ignore.
Following this thread (http://forums.adobe.com/message/4058748), I saw in the Registry that IGNORE is flagged as (1), which means to ignore upon load.
Manually changing as that thread recommends, however, doesn't help, as when I reload Premiere it resets the IGNORE flag to (1). Which is of course as the message indicates (No Loaders Recognize, so setting to Ignore).
I'm stumped here. What does it mean by No Loaders REcognized? I'm working with Magic Bullet support also and they don't seem to have an answer either.

Moved to Premiere Pro forum

After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

Hi,
I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
I am running:
MacBook Pro
OS 10.9.4
Processor 2.3 GHz Intel Core i72.3 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Cuda 6.0.54
The footage is Apple Quicktime ProRes HQ
I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
I am at a loss as of how to fix or even work around this. Any help would be appreciated.
Thanks

There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

Adobe premiere pro cc 2014 freezing with magic bullet looks

Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-Lok

I don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

XML Crashing FCP while importing. Magic Bullet Looks could be the problem

Hi All,
Need a little help here.
I am using FCP 6.0.5 on a power mac G-5.
I am trying to open an XML which was exported out of FCP 7 as a version 4 XML.
Magic Bullet Looks is being used on the project, and I think this is were the problem is.
when importing the XML it crashes FCP when I select the Include Video/Audio Effects.
When I import the XML without this option selected it opens fine.
I have MB Looks Installed on machine, so the Plugins are there.
Just wanted to see if anyone has dealt with this issue or might have any insight to the problem.
I can post the Crash info on the specific thread if that can help.
Thanks!

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

Fcpx with magic bullet green and pink flash frames

Hi I'm using fcpx with magic bullet. all recent updates. an imac 3.4ghz 32gb ram 512ssd drive and 512mb card. I keep getting pink and green flash frames whenever i colour grade in magic bullet.
first 22 secs of project were fine, next day I added to it, flash frames everywhere throughout the entire project. tried everything. is it a bug?
cheers

This problem is completely averted, for me (and reportedly most others), by exporting using "Send to Compressor" rather than using any FCPX presets. That is, no flashes or green/purple/upside-down frames show up in the final output.
I would hardly have believed that the "engine" used in Compressor is different to FCPX - but that is obviously (simplistically) the case.
This is also some confirmation that the problem is with FCPX - not the plugin.

Why does Magic Bullet Looks not work

Help,
I am having troubles with the plugin Magic Bullet Looks working with FCP X. I understand it is up to Apple to update and fix this.
Andy news on this issue?
Tjapko

Don't have the plugin.
http://www.apple.com/feedback/finalcutpro.html
Or: bugreport.apple.com if you have a developer account...

When ever i try to use magic bullet looks it says that it could not complete the command because of a problem with the filter module interface what do i do to fix that please help

i dont know what the problem is everything else works my photoshop runs really well its just when i try to use magic bullet looks then it gives me the error message

Contact Red Giant and see if they have an update to the plugin that fixes the bugs in the plugin that are preventing it from working correctly.

Im trying to use magic bullet photo looks with photoshop CC and everytime i use photolooks photoshop crashes and closes

Im trying to use magic bullet photo looks with photoshop CC and everytime i use photolooks photoshop crashes and closes

If Photoshop runs OK otherwise, then the problem is with the plugin
Red Giant - Products - Magic Bullet PhotoLooks 2.0 - Compatibility

Adjustment layer and Magic Bullet Looks corruption

I often find using the adjustment layers to apply colour correction an easy trick and therefore love the concept.
However, I've recently noticed that PP CS6.0.2 does not like MB Looks to be applied to adjustment layers all that well.
On two recent projects, the primary sequence has become corrupt (PP loads and quits immediately) and I have to recover the edit by copying the none adjustment layer tracks to a new sequence and then relinking the media.
Today, I spent 4 hours recovering another complex sequence and wanted to know if any other person has had a similar experience applying MB Looks to an adjustment layer?
A word of warning to others who might be thinking of the same 'trick'.
Perhaps I am expecting too much of the adjustment layer concept.
Thanks for any responses.
J.

I found myself here because... I was trying to open last saved project and it just crashes.
I did use Magic Bullet "Looks" and "Cosmo" on both footage and adjustment layers.
"Panic... Drink Coffee" !!!!! idea !!!!
Uninstall Magic Bullet
Launch CS6APP
Open same project file warning you don't have plugins installed.
Delete the "Adjustment Layers" (you won't be able to get the adjustment layer settings back but, you will get the edit back
Save project "new name"
Re-install plugins
Re-open CS6APP
"new name" project file opens fine without the adjustment layers.
But wait!!! Why should you uninstall Magic Bullet?????
Open a new project
Import entire project file into new project
Go to media bin and delete the "adjustment layers"
Find last Sequence that had the adjustment layers and you can go back to working
We put finishing effects on entire or even sections of full edit
1. Select edit < New Sequence from clip... apply effects on new sequence
2. Not "adjustment layers" BUT!!
2. Right now I found this just be an issue with RedGiant plugins I'm going to pass this post along to them..
This is a link to our project we had this happen too. (Sound tweaking)
Superfine Bakery : Who we are on Vimeo
CS6APP 6.0.5
MacBookPro Retina 16 gigs of ram
Thunderbolt 2 drive with source
USB 3 drive writing scratch
(2) external monitors attached

Photoshop crash when i use Magic Bullet Looks

Hello, good, I need help because I have been dating a message to start photoshop, which tells me card graphics is not supported, and attempting to open a plugin, such as Magic Bullet Looks, to put ok, shut me photoshop, and this had not happened to me before, what can i do?
i have WIN 7
Intel core (TM) i7 2.00 GHz
6 gb of ram
64 bits

I did a quick google search for "Magic Bullet Looks plugin" The first one I found does not even seen to be a Photoshop Plug-in Is this the plug-in your trying to use in Photoshop? Seems to be for video editing software. Photoshop can do limited video editing but is not listed as supported by this plugin.
Red Giant - Products - Magic Bullet Quick Looks Free 1.4
System Requirements
Quick Looks Free works with:
Adobe After Effects CC, CS6, CS5.5, CS5
Adobe Premiere Pro CC, CS6, CS5.5, CS5
Apple Final Cut Pro 6, 7

Photoshop cc problem with Magic Bullet Looks 2 !

I am having trouble with using Red Giants' Magic Bullet photolooks 2 plugin with PS CS6 (32&64).
The standalone program works fine on its own but fails to launch properly from PS's filter menu. It tries to launch the app but then reports an error Sorry, an error occurred (12288), Corrupted memory profile, then an error Can't open dest profile. These errors can't be cleared except by going into task manager to kill the app. Photoshop reports the error as LooksBuilder failed to launch. Please ensure the application has not been renamed or moved from the install location and then Could not complete the Photolooks command because of a problem with the filter module interface.
Please Help
i heard that the fix is by the color management , but i dont know how

Disable those plugins until you can get an update from the plugin manufacturer. Just change the name of the folder they're in to start with ~ and relaunch Photoshop.
Also, the magic bullet looks have nothing to do with color management.

Crash in After Effects CS5 When Applying Magic Bullet Looks 1.4

Hey guys Magic Bullet worked fine for me in CS4 but it's not doing so well in CS5 :/
Here's a screenshot of the crash I get when I try to apply the Magic Bullet Looks 1.4 plugin to some source footage:
Source footage is a .avi file and my setup is as follows:
And for the video card I've got a ATI HD 5770.

Please stick with this existing thread about this issue:
http://forums.adobe.com/thread/650949

Magic bullet plugins premier

Similar Messages

Maybe you are looking for