Magic iDVD Not Working

Some strange issues with Magic iDVD. If I click the Magic iDVD button on the iDVD start window the window closes and no project comes up, if I go and Quit iDVD the window appears and asks me to save project *Magic iDVD*.idvdproj. Now if I open iDVD create a blank project close the project then click magic iDVD it works with no problems. Anyone have any ideas?

Its somehow related to:
http://discussions.apple.com/thread.jspa?threadID=313109&tstart=45
I had the same problem. when I removed all the .avi files from my "Movies" folder (~/Movies) Magic iDVD worked as advertised.
You should also remove the iDVD folder in /home/Library/Application Support/
Hope this helps.
V
Some strange issues with Magic iDVD. If I click the
Magic iDVD button on the iDVD start window the window
closes and no project comes up, if I go and Quit iDVD
the window appears and asks me to save project *Magic
iDVD*.idvdproj. Now if I open iDVD create a blank
project close the project then click magic iDVD it
works with no problems. Anyone have any ideas?

Similar Messages

Magic mouse not working in mountain lion

magic mouse not working in mountain lion....What can I do?

Have you tried a fresh set of Alkaline Batteries?
Was it ever paired to another divice?

IDVD not working in 10.4.11

Anybody--
Can open iDVD, can select Magic iDVD, can put movies in movies and
photos in photos, Cannot get music to load--can see iTunes library,
get message cannot locate original file, also. cannot get a preview
of what I have placed. Get a blank screen and so dippy tune preloaded
into the program. Any suggestions?
Have downloaded latest update, not installed.
Got tip on how to load music from MUG member.
Still cannot get iDVD to preview and/or create Project.
Jake Reynolds

Quit iDvd. Then drag and drop the plist for iDvd to the trash followed by a complete restart of your mac.
com.apple.iDvd.plist
Repair permissions with apple's disc utility. Now try iDvd again.
Feel free to post back with your results.
(if it's still a no go, then run apple's software updater and repeat the final step I recommended above).
Message was edited by: SDMacuser

Right click on Magic Mouse not working

Hi
I am having this right click problem with my magic mouse. The right click function just suddenly stopped working two days ago.
I have checked the Mouse>Preference> Secondary click is enabled to "Right"
However, when I changed the secondary click to "Left", the "right click" function works perfectly fine w/ the left click, but when I change it back to "Right" nothing happens. I even tried unchecking the secondary click function (someone said that will work in another support site) but that doesn't help either.
I have tried removing batteries from my mouse, turning it off, turning bluetooth off, restarting the laptop...
Very confused right now. Please help!!

The post is a month old now, but I did stumble upon it after I suddenly lost my "Magic Mouse" right click functionality. Just as posted my; Mouse>Preference> Secondary click was enabled to "Right", though it would not work...
I tried everything including; restart iMac, enable and disable "Secondary Click", disconnecting the Mouse bluetooth and reconnecting it using my Magic Trackpad, etc.... until this ended up being my solution:
I went into System Preferences, Mouse>Preference> and disabled "Secondary click". Then restarted the system. Then returned to System Preferences, Mouse>Preference> and re-enabled Secondary Click. That worked and was my solution and has been working fine since yesterday.
I hope this helps anyone who encounters the same as we have.

Magic Mouse not working in 32 bit mode?

Hello,
I decided to boot my 64-bit 8 core Mac pro in 32 bit and the mouse (bluetooth apple magic mouse) was not working... The keyboard did work however.
Im not necessarily looking for a remedy to this problem as I don't really plan on using my system in 32 bit mode on a regular basis..... I was just wondering why it might be doing this..
Anyone have an idea?

Never mind... this is the MAC Pro section!
I must be really out of it this morning.... :/
Message was edited by: MACATTACK2010

Magic Trackpad not working on iMac after 10.8.5 update Help!

The Magic Trackpad was working fine antil I did the OS X Lion 10.8.5 Update yesterday and the trackpad has not worked since.

Look your System Preferences - Trackpad and see if it needs adjustment. If sill no joy then try doing a SMC reset 3x and if that fails try resetting the PRAM 3X. If you are not familiar with these please click
https://discussions.apple.com/docs/DOC-3603
for instructions.

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

IDVD not working right with Snow Leopard...a possible fix

I was having the following issue with iDVD and my new fresh install on a new hard drive of snow leopard 10.6.4:
iDVD would open to the screen where you chose what you want to do
I would click create a new project and get to name it
Nothing would happen but I knew the program was still running. I could see it in the activity monitor
I would go to quit iDVD and it would ask me to save changes and the beach ball would start spinning and I would have to force quit from the dock
Then I found this post after looking litterally all day for a fix....these instructions worked for me and my iDVD is now working normally...
(1) Go this folder:
/System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Framew orks/
(2) There should be 3 aliases there:
ImageIO.framework
ImageKit.framework
QuartzComposer.framework
(3) In my case, the QuartzComposer.framework was actually a folder. I removed this and created a new alias to
/System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzComposer .framework
After making the new alias, iDVD now works just fine. Not sure why this frameworks folder had become damaged like this. I am hoping that there are no negative effects on any of my other applications, but I've kept a backup of the original folder just in case.
I moed the quartzcomposer folder to 2 levels back and made an alias and put it in the A/frameworks folder and viola...iDVD worked for me! I am a happy mac user now

Thanks, had exactly the same problem.
Switched to administrator
$ su adminusername
Navigated to the folder
$ cd /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works
Listed the contents of the folder
$ ls -le@
Renamed the folder QuartzComposer.framework
$ sudo mv QuartzComposer.framework/ QuartzComposer.framework.old/
Replaced with a symbolic link to the correct framework
$ sudo ln -s /System/Library/Frameworks/Quartz.framework/Versions/A/Frameworks/QuartzCompose r.framework /System/Library/PrivateFrameworks/GraphicsAppSupport.framework/Versions/A/Frame works
iDVD works!!!

Magic Mouse not working in 64-bit mode

I just booted up in 64-bit on my new iMac i7, and it seems the magic mouse will not work. I tried to turn it off and on with no luck. Am I missing something??
Thanks.

got it working. I had to re-connect it in the BT pane.
Message was edited by: gr8fl4295

Magic Mouse not working correctly??

I just installed the new Mountain Lion OS and now my Magic Mouse does not work correctly. First after I log in, I have to turn the mouse off and on then then it will move. When I goto the options menu for the mouse none of the addtional features are there for the mouse including the scrolling. Any suggestions?

Hi Hunters Dad. I also had this problem and it turned out to be the bluetooth connection. After I upgraded, the bluetooth connection dropped off system preferences.
To locate your bluetooth connections click on the Apple logo in top left hand corner of screen, select System Preferences and look under Internet & Wireless. You should see Bluetooth there. If you don't, then power cycle your computer (see below). Afterwards go back to the System Preferences and Bluetooth should be there.
To Power Cycle my computer Apple support had me shut down my computer, take out the power cable and all other connections for one minute then plug back in and restart as follows:
press your computer ON button and then hold down the p r command option keys at the same time until the 2nd chime. I also have been having long boot ups since upgrading and the chimes didn't come on. Applecare instructed me to stop holding the keys and the computer eventually booted up. Lo and behold the bluetooth connections were visible and my magic mouse and trackpad now work fine.
Hope this works for you.

QooQee Text Magic Widget Not Working Properly

Hi,
I recently installed the QooQee text magic widget on my Muse website. (Here's the page in question.) It has always worked great in "preview in browser." But when I uploaded it to my site via ftp, it no longer functions. (I use BlueHost as my host.) Any idea why this might be happening. I already contacted QooQee and this was the response I received:
"I am not sure, but to make sure that the muse project uploads correctly, please use the “upload to FTP host” option in muse instead of uploading manually. If that does not work you need to contact your hosting to see why you do nougat all the scripts uploaded.
Note that the widget functions as it shows up in the preview but it will not upload so it will not in the hosted site."
I upload my site using the Muse upload to FTP host option.
So I contacted BlueHost and they said they couldn't help me since it was 3rd party software.
Please, any help would be appreciated.
Thanks,
-Kristine

Thanks for trying anyway, Bernard!
Yeah, I've now had two of QooQee's widgets either not work or completely break my site. Bummer.
Time to stop using them.

WOL/Magic Packet Not working with new EA9200

I just replaced an Cisco E4200 with a LinkSys EA9200. I transfered all the port forwarding and other settings and everything appears to be working except that a desktop that is hard wire connected to the router no longer appears to be getting Magic Packets sent to it over the internet. The packet ispassed fine interenally. The computer is static mapped and I have double checked the port and addressing informatuion on the new EA9200 and it is all correct -- it is just not working. The EA9200 has the latest firmware.
Ideas?

I have experienced the same problem since updating to Mountain Lion from Snow Leopard on my mid 2011 iMac. Tried taking out batteries, putting fresh fully charged ones back in and turning switch on underside of mouse on and off - does get connected eventually but because the pointer is inactive it is difficult to get it working.
Have found as a back up that a Microsoft wireless USB mouse works perfect - so this is my back up plan....sorry Apple!
Any bright ideas to rectify this annoying problem would be helpful. Always have the other contingency plan of using a wired mouse, but I find that the tracker ball gets clogged up.

LightShow Magic popup not working?

Hi folks, I am trying to import content from the existing site to the new BC site, and I have uploaded the relevant js files and folders, but even though the linked files are seen in the Inspector on the live page, the popup link to Enlarge and create a lightshow is not working:
http://joden.businesscatalyst.com/cat/artnouv/index.htm
I am wondering if there is a limitation in BC that is preventing the js from working or if there is some other error on my part.
Any help appreciated.
Thanks
Jeff

Hi,
I can see that there is no magnify.gif image in your "image" folder and your <a href tag is set to '#' and this is why it is not working. Also the linking is not correct to image folder, make sure you select the path carefully, See the image below
Hope this helps.

Black Magic Decklink not working on mac

I switched recently from final cut pro to premiere. However the blackmagic decklink videocard is not working. That is i can monitor the clips via the card in the viewer but not from the timeline. So i can't monitor my work anymore.
Does anybody have a clue what to do?

You have to select a Blackmagic Sequence preset to initialize the Blackmagic card in the Program monitor. I/O cards in Adobe will not initialize if you dont select one of their sequences. It's not like Final Cut where you can just select or change your output to the card.
Eric
ADK

Why does Movie Magic Screenwriter not work on iMac intel?

Is anyone else having a problem with Screenwriter software not working on an iMac 24" intel computer running Leopard latest OS? The program keeps deleting my text, and only reappears when I resize the window. But as soon as I scroll, the text disappears, or becomes all jumbled. Any one experiencing this, and know how to resolve it?
Thanks!

Sounds like a question for the software developer.

Magic iDVD Not Working

Similar Messages

Maybe you are looking for