Magic Mouse and Employing Pinch to Open and Close Feature
I have purchased a magic mouse and would like to employ the "pinch to open & close" features (option on multi-touch trackpad) with the magic mouse. This is not the same as zoom (e.g. hold control key with mouse wheel).
I have tried using bettertouchtool and magicprefs, but it appears that neither accommodates this feature easily. If there were a keyboard shortcut to employ this feature then I think I can assign it to a magic mouse gesture via BTT or Magic Prefs, but I cannot find such a keyboard shortcut.
Does anyone have any ideas?
It could be you are approaching it incorrectly. It can be a tricky little gadget that actually works with minimal pressure.
Try turning over the mouse so the compartment panel faces you, optical sensor topmost. Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards. The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place. Remember to move the small switch next to the optical sensor upwards which should turn on the green light. Then click twice to connect.
Similar Messages
-
Magic Mouse not not able to open folders or files
Magic Mouse not able to open folders or files on desk top. I can drag folders around but not able to open either with a double or single click of the mouse.
Tried an older BT mouse with same effect.
Command O works fine.Hey there kwilli2,
It sounds like your mouse left click is not functioning correctly. I have a couple of things to recommend and see what might be happening. First check in the Universal Access preferences pane to see if either, the double click speed is set to high.
From the Apple () menu, choose System Preferences.
From the View menu, choose Universal Access.
Click the Mouse & Trackpad tab.
For Magic Mouse, click Mouse Options to show these slider controls:
Adjust the sliders to your preference for double-click and scrolling speeds.
From: Magic Trackpad and Magic Mouse: How to adjust double-click and scrolling speed in Lion
http://support.apple.com/kb/ht4930
If lowering the double click speed does not resolve the issue, I would next try these troubleshooting steps in this article named:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Mouse buttons do not work as expected.
The Mouse preference pane allows users to customize the mouse features to meet their needs.
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
The window 8 store and all other app open and then close immediately .
The window 8 store and all other app open and then close immediately .I
have tried many methods like sfc /scannow,, powershell
-ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml without the quotes but , changed registery entries but found no effect . kindly help me !Hi ObaidMaki,
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
I would suggest you posting it in the dedicated Windows Forum
http://answers.microsoft.com/en-us/windows for more efficient responses, where you can contact Windows experts.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anywayOn Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/ -
my iphone 3gs is showing errore wen i turn on debug and some apps will open and then close
There's an apple store in my city but it is about a 20 minute drive and I do not have apple care. Do you think they would still help me?
-
The camera on my iPhon 4s is not working correctly. It is colored all strange and the shutter keeps opening and closing trying to fix the problem but it cant. I have already reset my phone and turned it off and on again. How do I fix this??
If resetting the camera app doesn't work you can try restoring your iPhone's software. The entire process takes about an hour to an hour and a half. Make sure you do a backup. Make sure you do a backup.
Backup:
http://support.apple.com/kb/HT1766
Restore:
http://support.apple.com/kb/HT1414 -
texmate and git 1.8.4.2 won't work on OS X Mavericks. I've downloaded them repeatedly and the following errors display "Textmate is damaged and can't be opened" and Git states "can't be opened because it's from an unidentified developer". Please help!
MedlockDustin,
for TextMate, you’ll need to download TextMate 2.0 alpha, since earlier versions of TextMate aren’t supported on Mavericks. The file will be named “nightly”; save it to your desktop. Once the “nightly” file has finished downloading, rename it to “TextMate.app.tar.bz2” — that will give it the “BZ” icon on your desktop. Once it’s been renamed, you can double-click on it, and TextMate.app will appear on your desktop. Use your administrative login to move TextMate.app to your Applications folder.
Regarding the “unidentified developer” message displayed by trying to open git 1.8.4.2, please refer to this Apple page for the workaround. -
I have a mac OS X and when I close it and reopen my screen opens and then shuts down for an instant and then reopens. Does anyone have this occur?? I have shutdown and restarted often.
A Safe Mode boot might help ..
Startup your Mac in Safe Mode
A Safe Mode boot takes much longer than a normal boot so be patient.
Once you are in Safe Mode, click Restart from the Apple () menu.
See if the problem persists. -
I have Firefox version 3.6.22 (Mac) & keep downloading Firefox 6.0.2 for Mac (as prompted) to my new Macbook Pro, running Lion (OS 10.7.1) and it won't open and install. WTF?
something similar has been happening to me for a a couple weeks (even before the most recent update, but now is definitely worse) on my 2010 MacBook Air. Firefox freezes upon startup, and then freezes maybe every twenty minutes or so when I'm actively using it, staying frozen for at least a minute or two. it drives me crazy.
-
I have a Windows laptop running with Windows 7 (64 bits). i was using itunes normally. Few days ago I upgraded to 10.5.2. When I completed download and install process, itunes opened and got stuck.It says "Updating itunes library". What can I do?
Hi Drgeert-
The hub may not be broken per se, but Apple has made adjustments to the limits on current that can be drawn from ports.
You probably need a new hub.
These may be helpful and/or interesting:
USB: High Bandwidth and Isochronous Devices Must Be Separated
USB Product-Specific Details
Luck-
-DaddyPaycheck -
Garageband does not start and I get this open and do not shut down or restart
garageband does not start and I get this open and do not shut down or restart
Such an error is always caused by inconsistent files in the Firefox program folder (application.ini and/or platform.ini and possibly others) and your only option is to reinstall that version of Firefox, either via the software repositories or the Mozilla server.<br />
Be sure to delete all files in that folder before copying the files from that tar.bz2 archive.<
*http://kb.mozillazine.org/Installing_Firefox#Linux
Note that the current ESR version is 10.0.5
*http://www.mozilla.org/en-US/firefox/organizations/all.html
*http://www.mozilla.org/en-US/firefox/17.0.5/releasenotes/
*http://www.mozilla.org/en-US/firefox/17.0.5/system-requirements/
All Firefox releases:
*https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/ (17.0.5esr/, latest-esr/, latest/) -
I have a partition on my IMac disk and Windows 7 loaded on one partition. I tried to open and W7 will not open and cannot repair itself. Is there a diagnostic/disk repair from Apple that I can try before reloading W7?
Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.
-
i am john and I need help downloading a progmmme yesterday and wanted to finish downloading open it and I am not told me that the program was shut down unexpectedly and restart ponia not opened and went back to download it and not opened my back probe to turn off the computer and there was no case
i am john and I need your help yesterday bought a program called DJAY when I finish the download and got an error opened and I saw him there was no case to install and thank you for your help anyway
-
MacBook Pro is operating more and more slowly in opening and closing, opening and closing programs and accessing and closing from mobile broadband. Is there a solution to this problem?
Did you try rebooting?
Maybe you are looking for
-
Lightroom 1.3 and Leopard 10.5.1
Hi Just downloaded and installed Lightroom 1.3. Print module now finally works!! But, Lightroom still doesn't print using profiles. I am using an HP B9180 with all the latest drivers. I had a print made using Lightroom 1.2, then 1.3 before resetting
-
Hi all, My report needs dynamic image changes. My issue is i was taking images using boimg://myimagename.jpg. defaults images such as skin_bo are coming on the report .but images which i inserted to it manually dose images i am not able to display on
-
Share contact with yahoo email
Has anyone noticed that when using the "Share Contact" function to email a vCard to someone doesn't work correctly when sending from a Yahoo! account? With my Gmail account, the email includes the .vcf file and can easily be added to any contacts app
-
I'm hoping the experts can help me! My Macbook Pro has gotten progressively slower, both in booting and loading pages. Restarts are not terrible, about 2 minutes, 15 seconds, but definitely longer than in the past. Often, pages I click on the intern
-
Workflow definition of task 'WS90123456' cannot be activated
Hello Experts, I am trying to activate a workflow on document event change, and i am getting this error in the event trace: Workflow definition of task 'WS90123456' cannot be activated In the receiver data i have: receiver type : ws90123456 object ke