Magic Mouse continually fails to left click, and keyboard problems

Since my Yosemite 10.10.1 update, my mouse, and keyboard keep failing periodically. After a nights sleep, when I try to open a program, by left clicking, it will occasionally only right click. Being able to left click, is very crucial, even more then right clicking, especially when trying to enter a website into a url, or when selecting a bookmark. Anyway I will restart my computer, and when I then try to enter my password, certain keys will then fail, and respond wt a low ping. It usually requires at least 5 to 10 minutes of a complete shutdown, until the keyboard and mouse work again. I keep fearing that my keyboard will fail, while entering this message. It occurs so very randomly, but has been occurring more often as time goes by. I worried that it might occur, before I'm done typing this post. Does anyone have any idea, what the problem could be, and have any remedy reccommendations?

Nubz,
actually I'm still using a standard wired apple keyboard, wt the magic mouse, because the wire goes under my desk, and I was actually considering getting a trackpad. Still since my Yosemite upgrade, I'm having problem after problem, so I'm not sure I will even stay wt Mac. Honestly I've examined any and all solutions, in that support article, but none of them were relevant to my problem.
I did check & repair my Yosemite Disk Permissions using Disk Utility, and although it found only a few things wrong, and none were related to my keyboard, or mouse (most were for my HP printer), repairs seemed to rectify the problem.

Similar Messages

  • Magic Mouse randomly enabled tap to click

    Hey guys. I've had a magic mouse for over a year now, and I've loved it for all those years.
    Until recently, when it decided to randomly enable the "tap to click" feature.
    I didn't even know there was a tap to click feature, and I can't find a way to disable it in system prefs.
    I've tried disabling MagicPrefs, restarting the mouse, restarting the computer, restarting bluetooth, and putting new batteries in the mouse, all to no avail.
    It's driving me insane.
    How do I get rid of this?

    There isn't a "tap to click" in standard OSx mouse preferences, only a physical click. This must be coming from MagicPrefs. Open the preferences for MagicPrefs (it should be listed under "other" in System Preferences) and select the "clicks & Taps" tab. Under Taps, uncheck all the one finger options.
    Regards,
    Captfred

  • Can`t left click and drag clip into timeline..Need advice

    Can`t left click and drag clip into timeline, or drag clips around in timeline.
    Can insert into timeline from Source Window but can't drag from source window.
    Can cut and paste within timeline.
    Restarting cs5 doesn`t help, but restarting computer solves problem for a while.
    Tried many mouses, but that didn`t help.
    Have no idea how I got the name OLD PRO, must have been drinking champagne years ago, because I am a bumbler par excellence!
    Message was edited by: old pro

    Thank you so much for asking
    In the Project Panel a left click highlights the asset but ignores the drag.
    In the timeline, a left click highlights the panel and when I try to drag it gives a flicker but that's all.
    I can cut and paste in the timeline.
    A restart of CS5 has no effect. Restarting the computer solves the problem for a while.
    Four different mouses--same problem.
    Doug

  • Is there an option to left click and open a bookmark in the same tab and right click to open bookmark in new tab?

    I want to be able to open bookmarks in the same window without having to right click and then select open. I would like it to be like internet explorer where you have the option to open a bookmark in the same tab or new tab. I had downloaded an add on that solved the problem with a simple right click to open in new tab and left click to open in same tab. This makes things soooo much easier. Am I missing an add on or a configuration where I can solve this problem. Thanks for your time.

    Very, very, very confusing!!!!! Exactly which is it that you want to do????? Left-click = same tab or left-click = new tab????
    Your initial subject line:
    '''''Is there an option to <u>left click and open a bookmark in the same tab</u> and <u>right click to open bookmark in new tab</u>?'''''
    Your last post (3rd post):
    '''''Is there a way I can <u>left click and automatically open a bookmark in a new tab</u>...'''''
    '''''''''...rather than having to left click and then select "open in new tab."'''''''''
    Right-click, '''<u>not left-click</u>''', has the "Open in new tab option".
    Easy answer is listed in my initial reply; left-click, same tab; middle-click, new tab!
    What are your Extensions?
    -List them.
    -You obviously set up some extension with some kind of conflict.
    To find out which Extension is causing the problem, <u>'''enable one-at-a-time'''</u>, restart Firefox for the change to take effect (File > Restart Firefox), test. When the problem re-appears, you know the extension causing the problem.
    See:
    '''[[Troubleshooting extensions and themes]]'''
    '''[[Troubleshooting plugins]]'''
    '''[[Basic Troubleshooting]]'''

  • Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ; then I click on the taskbar and the keyboard is active again during a few click then it stops again etc.

    Using Firefox 3.6 after a few mouse click/ keyboard input the firefox window is no more active, mouse click and keyboard input is inactive ;
    to solve it I click on the taskbar and the keyboard is active again during a few click then it does not work any more and I click again on the task bar etc.
    after several repetitions, I have to call the task manager alt+del+ctrl, then come back to the firefox window to be able to use keyboard and mouse again

    Attaching the picture for the tab shape I want...

  • I forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?

    i forgot how to use the setting, move the mouse to the upper left corner and the windows become smaller for an overview?

    I'm not quite sure what you want - if you want an overview of all open windows, use the F key.. Otherwise please post back and be more specific.

  • How do I enable the feature that allows you to left-click and drag cursor left to be same as back button?

    how do I enable the feature that allows you to left-click and drag cursor left to be same as back button?

    Do you mean something like clippings?
    *Clippings: https://addons.mozilla.org/firefox/addon/clippings/

  • How to disable right-click and keyboard shortcuts in adobe reader?

    Hello All,
    We are currently working on an issue. We want to display a pdf to users but not allow them to save it. Though we are able to hide the menubar and toolbars, the Shortcuts F8, F9 and Ctrl+Shift+S is the undoing of all. The user can still use these shortcuts to enable toolbar and menubar. Can anyone suggest how to disable the right-click and keyboard shortcuts in adobe reader?
    Thanks in Advance

    Impossible, and illogical. PDF files are not streamed or RAM-cached so if someone is viewing a file they must have already saved it.

  • Magic Mouse fix-it-yourself ~ right click/left click Design solution.

    May 5, 2011
    I initially admit that I am a genuine, bonafide Magic Mouse un-coordinated user or retard.  I’m habitually right-clicking with my Magic Mouse on matters that I meant to be left-clicking on; and had even thought, (w/o looking) that I was left-clicking accurately on.  Until the pesky, tell-tale, rectangular dialog box appears on my Mac mini, flat-screen desktop ... Informing me immediately that I just screwed up again and right-clicked where I thought that I was left-clicking.  It’s obviously a Magic Mouse disorientation issue, and it’s up to me or my action to resolve it.  And that is what I end up always scolding myself with, because I hadn’t first felt for the mouse’s side edge to secure an accurate click.  Well this ‘my bad’ self-denigration flogging is over!  ‘It’s not just mine alone spaz condition to blame!’ is my claim.  There is an obvious void, error or design flaw of the hollowed Magic Mouse ~ that I beg to share in responsibility, along with my personal malfunctions.  Doy!  The humpbacked, Apple Magic Mouse simply doesn’t even have a right-click/left-click divider or embossed spine on it at all, which is the obvious, inherent problem.  Such as PC mice have always had, haven’t they?  So I’ve do-it-yourself, (or done-it-myself) solved it by merely cutting a precise three-sixteenth inch, slightly-tapered sliver of black (my preference entirely) duct tape approximately 2” long and have successfully adhered it into it’s pre-determined, center position, (like cleavage), to achieve a resounding, accoladed victory!
    My summation is that the spineless Apple Magic Mouse is not for everyone.  But can be easily and inexpensively remedied to be so!
    Thank you,
    http://LSDexitOzAmerica.org

    Hi Eric,
    Thanks for trying to help, but this isn't a configuration problem, nor I want a workaround.
    Actually, I just solved it. I swapped the Apple Rechargeable Batteries for regular ones and it is now working as it should. Probably it's a bad charge problem with the batteries.
    Cheers!

  • Magic Mouse continually shows context menu on all mouse clicks

    Periodically the magic mouse gets into a mode where all mouse clicks result in the context menu appearing.
    I can't even double click on a application to open.
    I can sometimes get the behavior to stop by rebooting the machine (but not always).  And there are times if I keep banging on the keyboard in a text entry area the all context menu all teh time behavior will stop.
    Originally I thought it was just a magic mouse problem, but I see the same behavior if I swap it out with an old tethered mouse.  Any ideas?
    Thanks

    It sounds like the Control/alt key may be stuck down.  The CNTL click is another way to perform secondary click.
    You can check for that by starting the Keyboard viewer.  System Preferences > Keyboard > Keyboard tab > check "Show Keyboard and character viewer in the menubar".  Then click the icon in the menubar and start the Keyboard viewer. Any pressed keys will be reflected.
    Regards,
    Captfred

  • Using Apple Magic Mouse With Windows 7 64 bit and Parallels Desktop 8 questions

    I will be getting an iMac in the coming months and installing Parallels Desktop 8 and Windows 7 64 bit.
    I was wondering if I would have the functions of been able to left click, right click, scroll (preferably vertically but also occasionally horizontally) with the Apple Magic Mouse when I'm running Windows 7 through Parallels Desktop 8?
    I just wondered if anyone has installed Parallels Desktop 8 and Windows 7 and have you been able to do what i mentioned above and also have you come across any other issues, problems whilst using the Apple Magic Mouse on the Windows side?
    If there is any problems/issues with doing the above, is there anything I will need to do to get the above functionality to work?
    Thanks in advance.

    stz-42 wrote:
    I'm using Parallels 8 Win 7 64 bit, on an iMac.
    - leftclick and rightclick is working
    - i miss the middle button in my cad-software
    The same with the trackpad!
    Sometimes scrolling is a bit too fast, becuase Win 7 isn't made to use with the Magicmouse or trackpad.
    The only thing i miss / doesn't work ist the middle mouse button!
    Thanks very much for the help stz-42 its much appreciated.
    Providing I can left click, right click, scroll, then that's OK for me as I will be spending the vast amount of my time on the Mac side.
    Are you able to scroll both horizontally and vertically when using Parallels 8 Win 7 64 bit on your iMac?

  • Magic Mouse Scroll Fail

    Hi,
    I have just bought a Magic Mouse, and am trying to install it. My MBP recognizes it, I can move the cursor and have use of the buttons, however I cant scroll. At All.
    When I go into System Preferences>Mouse, I only have two sliders, Tracking Speed & Double Click Speed. When I click on 'Setup Bluetooth Mouse' it just says 'No Mouse Found' while the searching wheel continuously spins.
    Im running Snow Leopard, and my previous Mighty Mouse worked fine until the scrollball called it quits, which is why i bought a new magic mouse, which doesnt scroll.....

    If you are running 10.6 like your profile says, you need the Magic Mouse Software Update for Snow Leopard.
    http://support.apple.com/kb/DL950
    The link above requires you to have 10.6.1 before installing the update so you might want to just move up to 10.6.2
    You can update your machine to 10.6.2 and change your profile also.
    http://support.apple.com/kb/DL959

  • Magic mouse continues to disconnect

    This hasn't happened to me until now. The mouse gets disconnected every few hours, and the batteries and power are fine. I have to put my computer to sleep mode and restart it to regain the connection. It also happens when I gently hit the magic mouse on the mouse pad.

    Have you tried making it a favorite?
    System Preferences>Bluetooth - highlight the mouse and then click on the 'cog' at the bottom left side of the window and select 'add to favorites' (you may need to select 'Show more info' first in order to be able to choose Add to favorites).
    This fixed it for me when I was experiencing the same problem - added the keyboard as a favorite as well, even though that wasn't playing up.

  • In panorama, when I left click and drag to open a new tab group, unclicking doesn't create the new group and left clicking again only creates another group without finalizing the first one.

    In Firefox 4.0 beta 11 (Windows 7 Professional) left clicking in panorama creats a new tab group but letting go doesn't finalise the group. I have XP mode on my computer and firefox b11 works fine in the virtual PC.
    Edit:
    This has continued into Firefox 4 RC2

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Magic Mouse continually flashing light

    We have had our Imac and magic mouse for a fortnight and we are experiencing problems with the Magic mouse!!  It dropped on the floor earlier and the batteries fell out...since putting them back the light on the back is continually flashing and it does not appear to be making any connection to the Mac.  We have tried changing batteries in case, have gone through system preferences etc on the menu and nothing appears to be working.
    Any words of advice would be greatly appreciated.

    You are my hero!!!!
    I have had exactly the same problem with my mouse.  green light underneath the magic mouse double flashing.  No connection to my iMac.
    Took the mouse back to the Apple store and they tested it and swapped for a new one (can't complain about customer service there, very good).
    Still didn't work though when I got back home.
    Just tried what you said, deleted the mouse from the list and re-added it - it works!!
    Thank you.

Maybe you are looking for

  • Ethernet cable length

    Granted this isn't exactly an MBP question, but it relates to it. Is there some sort of limit on how long an Ethernet cable can be? Basically I would be running a 100' cable from where the router is to my new home office which happens to be on the ot

  • Refresh of single sheet in  a workbook

    Hi all, I have a workbook with 5 sheets and each sheet has 2 different queries. Users want to have a refresh button on each sheet, so that when they click on refresh button only that sheet should be refreshed. I know this can be done using VBA but do

  • FCP or Compressor Audio Problem - Please Help!

    Please Help! I have completed my wedding project in Final Cut and it includes 4 extra stereo tracks (music etc) on the Final Cut Time line, therefore 5 stereo tracks in total. Music was just imported into the browser and then placed according in the

  • Error Message= x Cannot find the HTML help browser installed on your system.

    Help! I cannot seem to find the solution for the error message I get when trying to generate a layout in Microsoft HTMl Help (Primary Layout). I am using the trial version, but it didn't seem to be an issue for anyone else in my class that was also u

  • Applet is UNABLE to resize browser frame !!!

    Hello, I've developed signed swing applet that I want to be able to resize or move its parent frame (the browser). In a case of the appletviewer there is no problem, but when working with the browser the applet's command to the parent frame (IE6) to