Magic mouse forward backward swiping does not work from time to time
Hello...
from time to time the forward/backward swiping functionality of my magic mouse does not work (The scrolling works though). Disconnecting and reconnecting does not do the trick. So I guess it might be a software problem. Restarting the iMac does not always help at once. After a couple of times it will work though again.
Can anyone help?
Regards
Bjoern
your answer should be here.
http://discussions.apple.com/thread.jspa?threadID=2211072&start=0&tstart=0
Similar Messages
-
In 5s, personal hot spot does not work from time to time. Not detected
In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.
Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good. -
Magic mouse zoom (swipe ctrl) does not work after mountain lion upgrade
Magic mouse zoom functionality does not work. Tried pram and scm...still broken. Advice?
pref>Accessiblity>zoom then use the modifier
-
TableView : sort = "SERVER" ...does not work for "TIME"
Hi,
TableView sort = "Server" works automatically for "Date" Fields and "Text" Fields.
But it does not work for "Time" field with data element "CDUZEIT". It shows the below error message:
Note
The following error text was processed in the system IFD : Invalid sort field type in "SORT ... AS TEXT".
The error occurred on the application server ifdmain_IFD_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Form: IF_HTMLB_ELEMENT_DELEGATED~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: DELEGATED_END of program CL_HTMLB_ELEMENT==============CP
Form: IF_BSP_ELEMENT~DO_AT_END of program CL_HTMLB_TABLEVIEW============CP
Form: ONLAYOUT of program CLO27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: %_ONLAYOUT of program CL_O27OLHO7EA9KVWPONPDC2NLTDFHCP
Form: DO_REQUEST of program CL_BSP_PAGE===================CP
Form: CALL_VIEW of program CL_BSP_PAGE_BASE==============CP
Form: CALL_VIEW of program CL_BSP_CONTROLLER=============CP
Form: DO_REQUEST of program ZCL_ZPR_C_ACTION_LOG==========CP
Form: DO_REQUEST of program CL_BSP_CTRL_ADAPTER===========CP
Thanks and Regards,
BindiyaWelcome to SDN.
This problem and solution to it is exaplined in the following oss note number.
<a href="https://service.sap.com/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=893210&_NLANG=E">893210</a>
Regards
Raja -
Lenovo wireless mouse middle scroll button does not work
lenovo bluetooth wire mouse works fine with click buttons but the middle scroll wheel does not work. scrolling with the wheel should move the browser screen up and down and it does not.
click buttons work fine just the scroll wheel in the middle of the mouseI tried this setting (adding Firefox as an exception) and it had no effect :-(
Mouse wheel still does not work with Firefox (but works with everything else). -
Mouse Forward/Back Button - Frames not Working
FireFox 4 - The mouse back button (programmed Alt/left arrow + Alt/right arrow) does not support browser window with split panes - multiple scrolling window panes. The front/back mouse buttons works with the left window pane, but not the right frame does not work. This worked in previous version.
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
Mouse pad (track pad) does not work,
Started Macbook w/o mouse. Track pad can move cursor, but "enter function" does not work.
Did the MBP come with the trackpad, or do you have a mouse as well? To turn off the trackpad, there is a botton on the right side, see picture. Hold, you will see a light, wait until it goes off. To turn on, hold until you see the light.
-
To boot my MacPro now, I have to go thru the reset Pram. Doesn't work each time. I usually don't turn my machine off. Booting in Safe mode does not work...when it doesn't boot I get only a gray screen, no icons in the screen like bad disk etc. I have replaced the battery. My professor son tells me to setup a new drive internally and install a new system and see if the new OS works. I have 3 internal drives with all data on bays 3 and 4... Bay 1 is the system drive with apps only. I'm 70 miles from the closest Apple store and thought I would ask tonight before driving in.
Replacing the PRAM ("backup") battery on the machine may be needed. Here's how, go to page 50 of the user manual:
http://manuals.info.apple.com/en_US/Mac_Pro_User_Guide.pdf -
I have upgraded to Lion OS only to find that my NAS (Iomega Home Media Network hard drive) does not work. It tells me that it is not configured. Are there any solutions . Have Iomega sorted out the problem?
Same issue here. Based on what I can tell, iomega still has not developed a solution to the problem. See below:
https://iomega-na-en.custhelp.com/app/answers/detail/a_id/28327/kw/Mac%20OS%20X% 20Lion -
Error: ELM does not work from UI
Hello guru´s,
hard to explain this briefly, but here it goes.
We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
Thanks in advance.SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik -
AT&T Microcell does NOT work with Time Warner Technicolor Modem!
After a frustrating two weeks of working through problems with AT&T, trying to get my Microcell on-line, Time Warner finally informed me that the Microcell does not work with their new Technicolor modem. Incredibly annoying that none of the AT&T reps I spoke to knew this. I walked in the Time Warner office to swap out the moden, the clerk there immediately knew the problem because he use to work at AT&T. How a former AT&T rep knew this and none of the new ones did, is beyond me.
There are so many ISP configured routers and gateways out there that it is impossible for AT&T support to keep track of what is compatible and what is not. We are just starting to see reports of incompatibilities with the Technicolor gateways (TWC equipment has a long history of problems with the MicroCell). Unfortunately the support reps are limited in what they can tell the customer and unless AT&T documents and verifies equipment incompatibilites they can't say anything. What the "former AT&T rep" knew may have been in-house discussions. AT&T, like any provider, has to be careful not to immediately blame the other party without "proof". The more documented complaints AT&T receives concerning a specific piece of equipment the better. However, it is up to the ISP to fix and/or replace their equipment when it comes to compatibility problems. Specific firmware pushes for specific equipment by AT&T to the MicroCell is not a viable alternative nor is it realistic.
-
Icloud log in with Apple id does not work from my mac when i try to run on photo stream
When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!
yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.
-
Cache clear does not work in timer mode
Hi,
I am using the webshop (ISA) on CRM 5.
In the b2c/admin application you have the option to clear the cache, this works when I click "clear" (manually), but you should also be able to specify an interval (TTL), this does NOT work. Do I have to have a separate Timer of Notifier application running to make this work?
Kind regards,
DickI believe the voice control is activated when the home button is pressed for more than a few seconds, this only happens to me when I put the phone unlocked in my bag or trouser pocket and had to contact Apple phone support.
For anyone who needs step by step instructions (like me), whilst voice control is activated the phone responds differently until voice control is turned off.
1) Slowly, (using 2 fingers can help), slide to the right to unlock screen
2) Tap the first number in your passcode until a square appears around the number key. This shows that number is activated. Then double tap the number key and a dot should appear in the first box. Tap the next number key in your passcode until the box appears around that number and then double tap until dot appears and continue.
3) Main menu > Settings (tap settings until square appears and then double tap) >General (following double tap principle)> Accesibility> VoiceOver (on), slide to off (tap once to activate and slide to off).
If you haven't got access to your home computer when this happens, I hope this helps. -
Roaming profiles not working from time to time
We have 6 Terminal servers and at random on the servers and at random with the users, the roaming profile will not be delete after the users log off.
The folder that remains in the user folder, this folder however is empty, not even hidden folders or files are present: C:\Users\"username"\AppData\LocalLow\Microsoft\CryptnetUrlCache
What we have tried is to run a log off script that has following in it "net stop CryptSvc" but this also does not work. We have had 6 users again today that had the problem. All on different servers.
We can manually delete the users folders without any problems when the problem occurs but this is not something that we would like to do every day.
I see a lot of similar problems but nowhere a real solution for this.
Ah the event viewer:
Windows cannot delete the profile directory C:\Users\"username". This error may be caused by files in this directory being used by another program.
DETAIL - The directory is not empty.
- System
- Provider
[ Name] Microsoft-Windows-User Profiles Service
[ Guid] {89B1E9F0-5AFF-44A6-9B44-0A07A7CE5845}
EventID 1533
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-06-06T07:27:05.906799700Z
EventRecordID 777512
Correlation
- Execution
[ ProcessID] 900
[ ThreadID] 6092
Channel Application
Computer TS05."domain".be
- Security
[ UserID] S-1-5-18
- EventData
Folder C:\Users\"username"
Error The directory is not empty.
Services installed:
- File Services
° File Server
° Services for Network File System
- Remote Desktop Services
° Remote Desktop Session Host
All the latest updates have been installed on all the terminal servers. The users are on different servers who have the problems and they aren't always the same users who have the problems so
don't start by asking if everything is configured correctly cause that is the case!Thank you for your answer.
The entry in that registry key remains indeed there. Is it safe to just remove that registry key when the user is no longer logged into that specific server?
The KB that you have send me is with the following explanation:
Notes
This issue occurs when the Windows Search service is enabled.
When this issue occurs, the registry subkey that represents the stale user profile is deleted. This subkey appears in the following location:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
But we do not have the Windows Search service installed nor is it enabled in the services list? But the subkey does remain in the registry.
With kind regards,
Thijs -
Hey guys,
About a month agop I got a Magic Mouse as a Birthday present and have been using it semi regularly on my Macbook. However, last night I accidentally left the mouse on while the computer was off overnight. Initially the mouse was completely not working, so I managed to reboot it by deleting certain things in the extensions folder (AppleBluetoothMutlitouch.kext and AppleMultitouchDriver.Kext) and while the mouse works fine now, the scrolling and swiping functions no longer work. I've tried downloading the update on the mac site, but everytime the message "a newer version of this software already exists" pops up!
I'm completely stumped (and I do not have USB Overdrive on my Mac)It's obvious that you need a screen repair.
This tells you prices: http://www.apple.com/support/ipod/service/prices/
If you bring your ipod into an apple store, they can also ship it out for repairs. Also you should back up your ipod onto your computer before you bring it anywhere, so your memory doesnt get wiped out. If you have itunes IOS 6.1.3, plug the device into the computer, bring up itunes, in the top right hand corner click the button that says ipod, then click summary. Near the center of the page should be a button that says back up now. Click that and it will save all of your ipod's ino to your computer so you can re-download it when its fixed. Hopes this helps!
Maybe you are looking for
-
Can see shared CD drives on MBA, but cannot read any data from disks
Puzzling one here. Have a MBA and am trying to use the shared drives on either a Windows XP computer, or MacBookPro notebook. Both computers are on the same wireless network, and both computers have DVD/CD sharing enabled. In the RemoteDisk shortcut
-
How do I transfer photos from iPad to Facebook..new iPod user
New iPad user have transfers my photos off the camera onto iPad but not sure how to get them onto Facebook..?
-
Dump in prodcution server while downloading ALV report to excel sheet
HI ALL, ALV report is working fine in bother DEV and PROD servers....but in production while downloading report to excel sheet it is going to dump. "dump is below: Short text Field symbol has not yet been assigned. What happened? Error in the ABA
-
I want to run a LabVIEW application on several machines remotely that do not have LabVIEW installed (licensing issues). Hence I have built a LabVIEW executable with the RunTime Engine to install on all of these remote machines. The VI has a bi-direct
-
Rollover images not properly aligning in design view
Hello, I am a self taught Web design teacher and I have seemed to run into an issue with roll-over images as links. I am teaching my students to use photoshop to create two images for rollover buttons. When the students insert the images, everything