Magic Mouse multi-touch surface not working.

Three months ago, I purchased the Magic Mouse. Recently, the multi-touch surface has not been responding. The tracking and bluetooth connections are fine. I have checked the Mouse Preferences and these appear to checked correctly. Any suggestions?

A few things come to mind....
Reset your computer's PRAM
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mh26871.html
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964

Similar Messages

  • TS2662 my new magic mouse scrolling & swiping will not work

    my new magic mouse scrolling & swiping will not work. Help??

    I had this happen to me as well. just last week (july 28, 2014) I brought my magic mouse from home to work since my work mouse was going south. paired it with bluetooth, it moved and clicked but no scroll or gestures. searched till I nearly ready to give up. then I installed USB overdrive. many forum posts said too remove that. I didn't have it, so I installed it. and then un-installed it.  everything works great now.
    hope this helps someone.

  • Multi touch gestures not working in mountain lion?

    Any one else having problems with their multi gesture trackpad not working when you wake your notebook from sleeping with Mountain Lion? If I restart it fixes it but once it falls asleep it stops working again.

    I've been having the same problem.  When my MBP would wake from sleep any touch gestures that used more than two fingers would not work.  I also had the issue where the MBP would forget the wireless network when it woke from sleep.  I found this answer on another thread and it worked on both issues for me.
    Instructions:
    Reset PRAM: http://osxdaily.com/2010/11/15/reset-pram-mac/
    Reset SMC:  http://osxdaily.com/2010/03/24/when-and-how-to-reset-your-mac’s-system-managemen t-controller-smc/

  • Magic mouse swipe between pages not working "only" in finders and preferences

    Hi community,
    I'm a new comer in this mac world like I just bought it less than a month ago and I'm already having trouble with it.
    My apple magic mouse cannot swipe between pages "only" in finder and preferences. I mean it works perfectly fine with Safari and stuff but when it comes to finder, I cannot move between folders by swiping with one finger. Ironically, it works fine if I change it to two finger swipe option by sacrificing 'Swipe between full-screen app' feature as it uses two fingers. Apple customer support that I talked to could not figure it out and I'm hoping to find answers here. I mean it's really awkward as it works with two fingers but not with one finger. Plus, one finger swipe works fine in Safari and other apps.
    I did what I can - restarting, -switch on and off the mouse, - PRAM reset, - trying in serfdom, -remove and pair up again the mouse, -run repair permission in disk utility.
    I use Mac Mini late 2014 with Yosemite 10.10.1 and this just happened all of sudden.
    Please help!!

    Just figured out it also does not work with the Mail app.

  • Magic mouse and number keys not working

    Last year, Wet Baloney had a problem:
    I have a first generation iMac with the wireless keyboard of that vintage and a new Magic Mouse.
    All of a sudden the keys on the numeric keypad part of the keyboard do not work. The number
    keys at the top do work.
    Also (all of a sudden) this computer is not detecting my wireless Magic Mouse. There is no battery
    problem. The mouse works fine with my MacBook Pro.
    Does anyone have any troubleshooting ideas ??
    While this question was not answered, Apple decided to archive it anyway so I'm reposting. I had this problem and my sysadmin wizard figured out what is happening. The solution is to open "System Preferences" --> "Universal Access" and select Mouse. Turn off "Mouse Keys". What I don't know is how that got turned on but it happened when I did a Mac OS update that came out around March 28, 2011. Anyway, that fixed both the mouse and the keypad problems. I'm posting so that someone doing the same search I did can find this answer.

    Thank You for this!! I was having problems using my Numeric keypad on a wired keyboard - when I used the number keys, the wireless magic mouse would lock up - the only way out was to Force Close the Application . . . Turning off "Mouse Keys" and hitting Shift > Clear turned everything back to normal.

  • Magic Mouse - Two Finger Swipe not working in Finder + iTunes

    Hello,
    since OSX 10.8 I realized that in Finder & iTunes the backward/forward navigation has stopped working with Magic Mouse (two-finger-swipe gesture).
    I have already read a lot of forums as well as apple-discussions and didn't find a solution apart from MagicPrefs or any other 3rd-party-app.
    Is that a bug or just not meant to work? Does anybody know why Apple stopped providing this - very useful - gesture?
    Thank you for your time and have a perfect day
    Sascha

    Pual_31 suggested good advise...
    I would also recommend if that does not work, to reboot and run "repair permissions" from Disk Utilities.
    Also might suggest downloading and trying MagicPrefs, it's a free program for the Magic Mouse and it really works great. May help with your problem, may not but I'd give it a try.

  • Synaptics multi-touch driver not working

    Hello,
               I've got a problem with my multi-touch pad. I have, without meaning to, deleted my synaptics pointing device driver and, obviously, it stopped working. I have already followed severeal times instructions by other forums but it wouldn't work anyway. The driver is already installed but it doesn't work any way. I have also tried to enable it but it was already enabled. Rebooting and restarting my computer wouldn't work.
         please help me.
    my computer model: an ultrabook/sleekbook HpENVY 14-k010us sleekbook

    Andy,
    A couple of things to try:
    Be prepared:
    Create a Restore Point   Create a Restore Point – Win7  OR  Create a restore point Win8
    Next:
    Perform the Hard Reset .  Boot the computer and log in
    That may do jar loose any cobwebs.
    Version update...
    If you are not using this version and you are running Windows 8 or 8.1,
    you might install this driver for HP ENVY 14-k010us Sleekbook :
    sp62794 Synaptics TouchPad V17.0.2.4
    =======================================================================================
    Click the Kudos Star!
    It is a great way to say “Thank You” for the help.
    Kind Regards,
    Dragon-Fur

  • Magic Mouse - browser navigation backswipe not working.

    Hey, is anyone else having a failing experience using the back nagivagation swipe function of the magic mouse?
    As of OSX Mavericks install, the single swipe does not swipe back to previous pages visited.
    I am sure this is a bug, and kind of surprised it wasn't caught during beta?
    I am however, running dual screens (15" retina monitor, and 27" thunderbolt) but can't imagine that would make any difference.

    Nadnerb, you are using the "magic" mouse correct?
    I might suggest switching the power off the magic mouse, then under your bluetooth devices, remove the magic mouse. Then turn on the mouse, and reconnect it bluetooth again.
    Then test the functionality of the mouse. If it still does not scroll, go into the system:mouse settings and check that those functions are enabled.
    If they are, and it's still unable to scroll, is it 100% not working under Safari - or are all applications not working with the scroll? If no applications aren't working, there may be a chance that the sensor in the magic mouse failed.
    Would be surprised if that was the case.

  • After reinstall my magic mouse and keyboard are not working properly

    so i've had various problems with my mac so did a clean reinstall, now my magic mouse wont scroll and my the f buttons on my wireless keyboard don't work ie volume buttons, i've checked the system preferences and all is well there, any ideas????
    i have a 2008 24' imac

    Hi
    It is not easy to say much about this issue.
    Do you use wireless devices? Are batteries OK?
    Have you noticed the same problem using other USB devices?
    I presume both devices uses USB port on your notebook.

  • Magic Mouse Right click menus not working

    Just got a magic mouse (using 10.5.8) and when I right click on a dock icon, the menu comes up (ie empty trash) however I cannot (left) click any of the choices and the menu freezes. I have to right click the desktop to snap out of it. This is happening for all icons/menus. Anyone know of this issue? All other mouse functions (swiping, scrolling etc...) seem to be working. Regular right click functions work, it's just this menu issue.
    thanks

    First, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
    If not then move these files to the Desktop...
    /Users/YourUserName/Library/Preferences/com.apple.finder.plist
    /Users/YourUserName/Library/Preferences/com.apple.dock.plist
    /Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
    /Users/YourUserName/Library/Preferences/com.apple.sidebarlists.plist
    /Users/YourUserName/Library/Preferences/com.apple.desktop.plist
    /Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
    Reboot & test.
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.

  • Multi touch pad not working Dell XPS

    The multi touch features on my touchpad are not working on Firefox 9.0.1. Dell XPS L702X with Synaptics PS/2 TouchPad. Multi touch works on all other programs, including IE. While attempting to use multitouch, for example scrolling, the icon changes to show that it is working - but it is not.

    Silly question....
    Has the trackpad been turned off by any chance? A lot of laptops come with a button you press or hold to turn the trackpad itself off (or may be a function button using the F keys)

  • Multi-Touch still not work! MacBookPro 13' late 2013 model!

    Sometimes in Safari,still crush and not work!
    My EFI is the latest 1.3!
    Always happen.......“Two-finger swipe to navigate” always not working. I have to reboot my Macbook,after that everything will be fine.......

    Hi 66-pro,
    If you are having erratic trackpad behavior, you may want to try resetting your System Management Controller (SMC); you may find the following article helpful:
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964
    Regards,
    - Brenden

  • Multi-touch trackpad not working on new MBP

    I know I've seen this listed elsewhere, but I have something to add to the conversation.
    My MBP does not seem to recognize the Advanced trackpad functionality.
    I go into the System Preferences and first, the Keyboard/Mouse option takes a long time to load, and then the advanced features show up without a checkbox next to them. I've gone into iPhoto and tried the pinch-zoom and it doesn't work.
    Could this be due to the fact that I used Migration Assistant from an older model MBP? Wouldn't it have brought over my System Prefs as well?
    Just trying to get this figured out.
    topher

    I presume you are still able to use the trackpad but without the advanced features. I've been searching for the possibly simpler options to try. One of these is to remove any preferences relating to the trackpad from the Libraries which store these. What should happen if you do this is that the system will recreate these files and enable standard usage of the relevant software/hardware if the software/hardware is in good order.
    You can also check System Profiler to make sure that it is detecting your keyboard/Trackpad.
    I've located several files that might affect your situation. Moving the preferences out doesn't worry me very much but I'm not sure what will happen if you move a +preference pane+ out. There is a pp that relates to keyboard/trackpad in /system/library/preferencepanes/.
    Preferences that you can remove fairly safely are:
    /users/(yourusername)/Library/Preferences/com.apple.systempreferences.plist
    I don't know what settings this will remove but it might free up system preferences to allow the advanced features to be set.
    Beyond this the only suggestion I can make is that you do an 'archive and instal' of the system to get a brand new system running.
    Neville

  • Magic Mouse left right swipe not working

    I got the mouse with my computer about a month ago. And suddenly, the left/right swipe has stopped working. I've wiped down the top and changed the batteries. I restarted. It doesn't seem to be working.
    Has anyone else had this problem? Does anyone know how to fix it?

    Take it back to Apple and get a new one, yours is still under warranty.

  • The Multi-touch surface of the Magic Mouse could be more smoother and the sensor could be more sensitive on different kinda surfaces.

    The Multi-touch surface of the Magic Mouse could be more smoother and the sensor could be more sensitive on different kinda surfaces.

    ) I have a ProLink bluetooth mouse with me labelled 2.4GHz wireless mouse with this USB bluetooth stub that is inserted into the USB port in order for the mouse to connect to my iMac. (i'm not a techincal guy)
    Is this mouse connected at the same time as the Magic Mouse? If so, unplug it.
    Try resetting the PRAM: http://support.apple.com/kb/PH14222
    Try putting it on a mouse pad.
    Barry

Maybe you are looking for

  • If I disinstall iTune and reinstall it will I loose all my music?

    If I disinstall iTune and reinstall it will I loose all my music? I am constantly alerted that I must install an updated version but each time I try to do it it does not work. What should I do?

  • How can I tell the length of an overall project in Captivate 5?

    In Captivate 4, the project length appeared in the bottom left of the screen when you first opened the project.  By project length I mean the total time of all slides added up.

  • Designer - complex join not displayed correctly

    Post Author: Jon80 CA Forum: General Feedback I've created a complex join as part of a tutorial for aggregate aware tables.  So I've created a complex join as follows within the e-fashion universe: Calendar_year_lookup.Yr=Agg_yr_qt_mt_mn_wk_rg_cy_sn_

  • What are the differences between iPod 2nd and 3rd Generation models?

    Hi: I have a couple questions about the differences between some of the iPod Touch models: 1) What is the difference between the *2nd Gen 8GB iPod touch* and the *3rd Gen 8GB iPod touch?* 2) What are the differences among the *3rd Gen iPod Touch 8GB*

  • Displaying Excel Gridlines

    Hi, I have Office 2004 installed on MacPro with Leopard 10.5.7 When I open a new Excel file and start using it, NO gridlines are displayed (the View Gridlines checkbox is checked). I have to go to Excel->Preferences and change the Gridlines colour fr