Magic Mouse only works with Mobee Rechargeable

I have had a Magic Mouse for years. I don't recall how long. A couple of years ago I bought the Mobee Magic Charger and have mostly been happy with it. However, lately I cannot get my Magic Mouse to work with anything BUT the Mobee rechargeable unit. Normal batteries won't turn it on.
Anyone have ideas of what could be wrong?

After the initial full charge of the battery pack I get nothing. The green light is steady. However, when I power on the magic mouse and try to pair it with my iMac, it never connects. Also, the green light on the mouse itself is no longer lighting up.
Does it not blink when you flip the switch off then on?
Some people have complained about not being able to re-pair after a battery change. Smc and/or pram reset might help here but don't bother since you apparently have a bigger problem to solve.
And if that weren't enough, the battery pack is stuck and I cannot remove it from the mouse. The mouse was working just perfectly when I was using the AA alkaline batteries. Am I missing something? Or is this a defect in the product?
Defect in the battery pack perhaps. I would call Mobee and ask them for their opinion. Maybe the batteries were defective and swelled in the case (just guessing).

Similar Messages

Magic Mouse only works with laptop open

I bought the Magic Mouse so I could wirelessly awaken my laptop while it was closed and connected to the television.
It worked for months. Now when I awaken the laptop with the mouse it turns on for one second and then turns off.
The mouse works perfectly fine with the laptop open and using the television as a "second monitor". It no longer works how I prefer it with the laptop closed (it's much better because then the sound comes through the TV and not the laptop speakers).
Why did this suddenly happen?

Hello Siôn Dafydd,
Welcome to the Apple Support Communities!
I understand that you are using an external display with your MacBook Pro and when you close the display on your MacBook Pro, the second display turns off. It sounds as though your MacBook Pro may not be connected to power while using with display closed. Please read over the attached article for information on using a second display in closed-clamshell mode.
How to use your Mac notebook computer in closed-clamshell (display closed) mode with an external display - Apple Support
Have a great day,
Joe

Does Mighty Mouse only work with desktop Macs??

I just bought an Apple Wireless Mighty Mouse, assuming it'd work with my new Leopard OS X Macbook. I followed the instructions on the Mighty Mouse booklet...but no installation start-up window ever appeared. I'm a beginner with Apple, so I figure I've done something wrong....does the Mighty Mouse only work with desktop Macs and not MacBooks?
Please help if you can.

Ah! sorry, my mistake! "wireless" was the key word. And yes, prior to my new mighty mouse, I also used the wireless one. And you need to do the following:
1) Turn bluetooth ON (either from finder icon (you can have it placed on your finder bar by tick box in sytem preferences/bluetooth.
2) Then, you need to "pair" your mouse via bluetooth setup assistant.
3) once "paired" off you go.

Magic Mouse Not Working with Boot Camp.

Hi All,
I have a wired issue here. I installed Windows XP on my iMac 27" using bootcamp and all worked fine till one day my Magic Mouse stopped working in Windows. Now the funny part is windows is able to detect my mouse and says that the device is working normally but the green light under my mouse is OFF. No matter what i try i cannot get it to come on. But the moment i boot to Mac OS X the mouse works perfectly fine. My Apple Wireless KB works just fine in Windows. A USB mouse also works fine. I have also installed Parallels on my Mac and when i boot into the Windows partition using Parallels the Magic Mouse works fine. Any idea as to whats going on here.?
John.

I have a new (July 2009) iMac24 and neither the wireless mighty mouse nor keyboard work with Boot Camp XP Home Edition SP3. They install OK with the Bluetooth control panel, but then after five or ten seconds, drop out of the control panel and have to be discovered again. I spent two hours today with a Mac support expert, but no joy. We both gave up. It seems the wireless mouse/keyboard does not work with Boot Camp. If anyone hears of a solution, please let me know.

Magic Mouse not working with rechargeable batteries

Hello,
I have a Magic Mouse. I ran out of alkaline batteries and replaced them with Philips rechargeable batteries.
Magic Mouse refuses to turn on.
The same batteries, used in a MS Mouse work just fine. In fact, it works even with only one of them.
Are there incompatible batteries with Magic Mouse? Can anyone advise?
Thank you.

I suspect it may be a voltage issue. Virtually all rechargeables work in my Mighty Mouse but I have not been able to get rechargeables to work at all in my Magic Trackpad. I have tried about 5 different varieties. What I have not tried, as I did not have any with me in France, are these "instant on/ready to use" rechargeables. I measured the voltage of newly recharged NiMh cells at about 1.47V, which quite quickly dropped to about 1.3 to 1.4V and then stayed there a long time. Fresh Alkaline were about 1.6 to 1.8V and fresh Oxyride or Lithium, about the same. For high current devices, the lower voltage of the NiMh cells may not be an issue, as their internal resistance is much lower than alkaline, so that the effective voltage in use may the same. However for very low current devices like Mice or trackpads, the free voltage may be more important,
Wilson

Why does magic mouse not work with duracel batteries

I bought an iMac a few months ago.
Now the batteries from the magic mouse are empty and I had to buy new ones.
Only they don't work. I had to pick cheap batteries from others devices.
Can anyone tell me which brand wil work?
Thanks,
Bernadette

I bought my iMac 2 years ago, it came with a Magic Mouse, within several months I started having the same battery issues. I looked here, and on the Internet to find out if the problem was already known about, but found only people guessing wrongly at what the problem is. I do hope Apple has fixed this, but unfortunately many of got stuck with a junk Magic Mouse. As an Engineer with 25+ years of experience in the design of electrical contacts & connectors which includes over 2 dozen patents ... believe me when I say the problem here is that the recessed positive contacts (at the on/off switch end) are too deeply recessed to make contact with the industry allowed variation in AA batteries. Those contacts are too deeply recessed because the plastic is too thick (in the hole that forms the recess) and the metal contacts are not tightly up against the backside of that plastic wall, in fact it looks like they are installed with a gap and/or can deform/bend away further opening that gap even larger. As mentioned above many industry AA battery standards define the positive button contact height as being 1.0mm or larger ... however that plastic wall is about 1mm thick, add the gap for the metal contacts and you have no electrical contact no matter how much contact spring force there is at the negative end. Unfortunately, there is no simple good fix for the average person to perform, the recessed contacts can't be accessed to bend them to remove that gap and the pastic is too thick anyway .. leaving us with a "duct tape" fix, like wadding some tin foil into that positive terminal recess and swearing when it falls out during battery changes. A nice elegent fix, would involve disassembling the mouse, machining plastic, backing up those terminals... absurd right?... would be easier if Apple sent us a new mouse that works.
This problem has nothing to do with overall battery length, battery diameter, or inadequate spring contact force from the negative mouse contacts. Also I doubt the brand or type of battery is the issue for anyone, the positive button heights vary among brands/types, but probably are 1.0mm or larger per the industry specs, Apple just didn't design this mouse to that industry spec, or they did not control their manufacturing quality to yield what they designed. This iMac was my FIRST Apple purchase after decades of avoiding and dismissing Apple, ironically they won me over with their progress and high quality products ... I'm rather disappointed.

Magic trackpad only working with a wet finger.

Since I cracked open my box I have not been able to get my magic trackpad to work continously. While I am able to get a bluetooth connection, when I move my finger across it I only sometimes get a response from the mouse. This becomes only slightly more effective if I lick my finger or cleaned the surface of the trackpad with a slightly damp towel. Once the surface and/or finger are completely dry again however, the trackpad returns to it's almost zero response. Is there some film to remove or special cleaning I should be doing when I opened the box?

I just noticed the same thing = I hadn't used it much but just moved up to Lion and started to and it wouldn't work = but when I read your issue I tried it with a wet finger and it worked. I can't even read the serial number on it so can't call for help. Any other suggestions?? I bought it in late April.

Magic mouse doesnt work with new macbook air

Hey guys,
Just bought the magic mouse and it pairs just fine to my new 13" macbook air. But it only moves around and clicks and nothing else. Does not scroll or do any multitouch functions. I have checked all software is up to date and all settings are correct.
Thanks in advance.

I was having the same issues as Cawlin and called up AppleCare. They suggested resetting the PRAM, and then a SMC reset. That didn't work, so they had me do a re-install of the OS and system updates. None of that worked, and then it suddenly occurred to me that I had installed USB Overdrive a little while back and turns out that it was the culprit. A quick uninstall and everything's back to normal. The mouse preference panel is now displaying the correct options for the magic mouse. So if you have any 3rd party software for a mouse or keyboard installed, I would suggest uninstalling or disabling it and see if that does the trick.

Magic Mouse not working with Lion

My Magic Mouse does not scroll with Lion. Preferences are set up correctly. What am I doing wrong? Thanks.

I've been using my Magic Mouse on and off this year, but it worked perfectly fine when I upgraded to 10.7.0. I haven't used the MM since my desk finally arrived today and in 10.7.2 vertical scrolling of the MM just won't work. It's so frustrating because of those iOS-like scrolling bars that vanish. It's SO HARD to find them to scroll and then my wrists are in an awkward position just forcing my mouse to scrolling vertically (by clicking, no gesture).
I have however noticed that when I put my MBA Rev A to sleep and wake it again, that vertical scrolling on my MM will work again for about 10 seconds. My batteries are at 100%, so it can't be that.
This absolutely *****! Apple's attention to detail on these small things have slipped. I even had an issue with iPhoto 11 the other day when I noticed that you literally have to jump through hoops to manually force face detection on photos that the application can't automatically detect on . That feature used to be so intuitive in iPhoto '09. Too many balls in the air, Apple?

Magic Mouse Not working with iMac. EXTREME lag.

Here's a link to video of whats happening - http://www.youtube.com/watch?v=SOogRQu93g0
The whole time I was just moving it around in a circular motion. Batteries = 97% I just got my logicboard repaired on my iMac G5 and this has been happening ever since

Try unpairing it. Do you have another mouse that you can use to see if it is the mouse, rather than the computer? If the second mouse works properly, try rep-pairing Magic Mouse.

Magic mouse not working with mountain lion

Hey is anyone else loosing connection with their magicmouse since the mountain lion release... I have had three sets of new batteries and it still keeps losing connection.
Can anyone else help me?

I have experienced the same problem since updating to Mountain Lion from Snow Leopard on my mid 2011 iMac. Tried taking out batteries, putting fresh fully charged ones back in and turning switch on underside of mouse on and off - does get connected eventually but because the pointer is inactive it is difficult to get it working.
Have found as a back up that a Microsoft wireless USB mouse works perfect - so this is my back up plan....sorry Apple!
Any bright ideas to rectify this annoying problem would be helpful. Always have the other contingency plan of using a wired mouse, but I find that the tracker ball gets clogged up.

Scrolling and rightclicking with magic mouse doesnt work anymore

Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

Also tried the universal access thing. Doesnt work.

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

HT2845 can't get my apple magic mouse to work on my boot camp on my early 2011 macbook pro with latest Marveric OS

I can't get my apple magic mouse to work on my boot camp,running Windows 7 Ultimate on my early 2011 macbook pro with latest Marveric OS........ It works perfectly on the Apple ,

Not sure if this will help anyone, but I had trouble installing on 10.8.
I then found this particular support page:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&s w_lang=&product=4231205#N228
Be patient with the download, it takes some time ... When it has downloaded, follow the install instructions. It works well.
I use the printer through usb but my wife uses wireless from her PC laptop.
Andre Francis

I have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

have a touchscreen laptop running Windows 8.1. Is it possible to use the touchscreen with Firefox? I've installed Firefox but it only works with the mouse etc

Hello Sirving575, sorry but the metro version of firefox has been cancelled, see : https://blog.mozilla.org/futurereleases/2014/03/14/metro/
thank you

Magic Mouse only works with Mobee Rechargeable

Similar Messages

Maybe you are looking for