Magic Mouse swipe not working

It is not working no matter it's one finger or two fingers swipe.
Any solution please?

Thanks for the reply. What I meant was I doesnt go back to previous page on my Firefox browser by using swipe. It worked last time.

Similar Messages

  • My magic mouse does not work with OS X Mountain Lion?

    My magic mouse does not work the direction of vertical displacement with the update OS X Mountain Lion?

    You are correct that you cannot install version 5.x of the AirPort Utility on OS X Mountain Lion. However, once installed it will run just fine. One workaround is to extract the utility directly from the disk image (.dmg) file.
    Here are the basic steps to install version 5.6 under Mountain Lion using CharlesSoft's Pacifist:
    If you haven't already download the AirPort Utility disk image file directly from Apple Support Download
    Place the resultant AirPortUtility56.dmg file onto your Mac's Desktop.
    Run Pacifist.
    Click on the Open Package option. Find the disk image file that you just placed on your desktop, and then, click on Open.
    The utility is located as follows: Contents of AirPortUtility56.dmg > Contents of AirPortUtility56.pkg > Contents of AirPortUtility56Lion.pkg > Applications > Utilities > AirPort Utility
    Drag AirPort Utility to your Mac's /Applications/Utilities folder.
    You can now run the AirPort Utility from the Utilities folder.

  • TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Try resetting the PRAM and SMC.  Try making the device a favorite .

  • Magic mouse gestures not working

    the gestures of my magic mouse stop working.
    I've tried another mouse on my laptop and it work
    I also tried my mouse on another laptop and the same problem happens.
    it's behaving like a "normal" mouse.
    Is this a hardware problem? if yes, How do I fix it?
    Please advise,

    Reset the SMC and PRAM, it make take 2-3 attempts to fully clear them. If those do not work restart in Safe Mode to clear some caches.
    Shut down the computer.
    Unplug the computer's power cord and all peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Magic Mouse click not working

    I have a magic mouse, with a MBP and 10.6.1 and the wireless mouse update installed.
    The mouse more or less works if "Secondary click" is checked. If I uncheck it, clicking does nothing. The mouse moves and scrolling works, but clicking has no effect.
    Also with "Secondary click" checked, if any part of my hand is touching the top surface of the mouse, I get a right-click when I click - makes the grip kind of awkward.
    Tried re-installing the software update.
    Any ideas? Thx.

    Not sure why it worked this time, but I deleted
    from the User preference folder again, and now the mouse is behaving as normal. I did not touch the .globalpreferences file.
    I did clean all the system/user caches (using Cache Out X), and then deleted this file again, but now the behavior seems correct
    - with Secondary Click deslected, the surface acts as one big single click button
    - with Secondary Click selected, it acts as a two button mouse
    - in Secondary Click mode, resting your second finger on the contexual side surface while clicking on the single click side surface does not interfere with the single click as it had before
    - in Secondary click mode, you need to lift your finger off the single click side when clicking the contextual button side, or it will not register as a contexual click. I presume this is expected behavior, as it is physically a one-button mouse, and Apple opted for a two-finger click to be interpreted as the more common single click request.
    Hope this helps some

  • Magic Mouse Momentum - NOT WORKING!

    Started using my brand new Magic Mouse and the momentum feature does not work. It does scroll like any other mouse on the market but no momentum. Also, I the tracking is slow even when set on the max setting. I've seen the posts with slow tracking, but is anyone having an issue with no momentum?

    Ok, this is what I did:
    Searched for, open it (It should open, by default, in Property List Editor).
    Open >Root. It will show a list of properties. BUT the 2 buttons at the top of the window will be greyed out. Just click on the property "UserPreferences" and the buttons at the top will become active.
    Click the "Add Sibling". In the new property that appears enter MouseMomentumScroll. Set it to Boolean and set to Yes and restart.
    And it works!
    YES, YES, I know I'm saying basically the same thing as DanielZ360, but I think "open the domain overview" might be confusing.

  • Magic Mouse scroll not working.

    Has anyone found a solution to the Magic Mouse, not scrolling all of the time after the latest OSX update (10.9).  Tried forgetting the mouse and then reactivating it.  No luck.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot insafe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • HT3904 Magic Mouse: laser not working

    Without warning, the laser appears to have stopped working in my Magic Mouse. It connects using Bluetooth, I have full fuctionality with the left and right click features as well as the surface of the mouse, however I am unable to move the cursor on the screen of my MacBook. Could anyone offer a solution, or do I have to buy a replacement? Thank you in anticipation.

    Try resetting the PRAM and SMC.  If that does not work, take it to an Apple store (if one is close) and have them test it.

  • Keyboard and Magic Mouse Bluetooth not working

    I have an imac 21.5 late 2012, the problem is that every time you turn on the computer, keyboard and mouse do not respond, to make it work I have to turn it off and unplug all cables and let it without energy about 10 seconds, then i turned it on, and works great.
    Anyone have any similar problem? The imac has only one month of purchasing it and this is driving me crazy, it´s not suppose to act this way.
    I'll be very grateful if someone helps me

    Hey csaady,
    Thanks for the question. I understand you are having issues with your wireless peripherals when starting your computer. The following article may be of assistance to resolve this issue:
    Troubleshooting wireless mouse and keyboard issues
    If you continue to have issue, you can also reset the PRAM for your computer:
    OS X Mountain Lion: Reset your computer’s PRAM
    Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
    Matt M.

  • Magic Mouse will not scroll in Windows 7 boot camp, but works fine in Mac OS

    I have a Magic Mouse that was working fine it would scroll and everything, then one day it just randomly stopped working in my Windows 7 bootcamp partiontion. I went to the Mac OS to see if there was anything wrong with the mouse, but it works fine in the Mac OS. I already made sure to install all available software updates but that doesnt seem to have helped. Any help would be appreciated.
    Thank you

    My wireless mouse is not recognized by Bootcamp bluetooth.
    Have you been able to solve your mouse issue?

  • Just downloaded Yosemite and now the swipe feature on my mouse does not work. Why?

    Just downloaded the new OS onto my iMAC and now the "swipe" feature on my mouse does not work, i.e. I can't go back and forth between web  pages.  Is this a function of the new OS?

    What kind of mouse do you have? USB? Have you tried to plug it in - try all the USB ports (maybe there is a problem with one). It should automatically detect it.

  • We just added Maverick to our Mac and now the magic mouse will not scroll with finger tips!!

    We just upgraded our system to Maverick. Now our majic mouse does not respond to the finger swipe at all.
    Also the volume contro;s stopped working on the wireless keyboard.

    Hi davidgraham193,
    Thanks for visiting Apple Support Communities.
    If your Magic Mouse is not scrolling, first go to the Mouse section of System Preferences and try toggling the "Scroll direction: natural" checkbox to see if it has an effect.
    Scroll direction: natural:
    Select this option to move the contents of a window the same direction as your fingers.
    OS X Mavericks: Change the way your trackpad works
    If the issue persists, see this link for additional troubleshooting steps:
    Troubleshooting wireless mouse and keyboard issues

  • 10.10.1 magic mouse will not scroll now

    10.10.1 magic mouse will not scroll now
    anyone else having this problem
    mouse works... is recognized but the preference pane
    has not swipe selection and i cannot turn off bluetooth

    To resolve this issue try the following:
    from the upper left corner of your screen click:
    1.  / system preferences / bluetooth
    2. Locate your mouse under the devices panel
    3. Remove your mouse
    Click on it so it is highlighted in blue
    Click in the blue "x" or you can click delete after you have selected your mouse.
    4. Reconnect your mouse (re "pair" ) your mouse
    This should resolve the scrolling issue if it occurred after the 10.10.1 update.

  • TS3048 my magic mouse does not want to right click anymore?

    My magic mouse does not seem to right click anymore, any suggestions?  For example, I used to right click on my icon of my memory card from the camera that I have inserted into the side of the IMac and I could choose "eject" now it doesn't want to right click and open up those options.  Am I doing something wrong?

    This seems to be a common issue.
    I've seen mixed posts on the net about the ES8000 working with the Apple Keyboard but from what I've seen the Apple mouse tends to fail the sync constantly.
    Sad, I just bought a mouse to improve navigasting on the ES8000 and dissapointed that it doesn't sync. Maybe an issue with drivers on the TV.
    Which Dell mouse (model number) works for you?

  • Magic mouse no longer works after Lion upgrade

    After upgrading to Lion my magic mouse failed to work. I plugged in an older USB mouse and thankfully it does work. It appears the System Preference for Blue Tooth no longer has my machine name in it, instead it has "Name not available" and the "On" check box will not stay checked when I reopen the preference. The syncing process "Set Up New Device..." doesn't seem to work either, it searches but doesn't find eventually the flashing LED on the mouse goes out.
    I've tried to solve this but failed. I believe its something wrong with the installation of Lion on my iMac because I installed Lion on my lap top and the magic mouse WILL sync with it.
    What do you suggest I do to remedy this situation?

    Solved it myself. Re installed Lion.
    Thanks Radio for your help

Maybe you are looking for

  • BB Torch 9810 direct access mailbox Microsoft Exchange 2010

    Hi, Wanna check whether in anyway my BB could direct access mailbox Microsoft Exchange 2010 without BES (private and/or Company). Thanks BR

  • Cash flow statement (direct)

    Hi experts, I'm using SAP ECC6 and I'm aware of SAP has provided "Liquidity Planner" process. Anyone knows where to get the step by step configuration on this ? I heard that Russia has a model in standard SAP. Any example of configuration documentati

  • Currency and Quantity fields in Nested Table

    Hallo Experts, I have created a Interface  with import Sturcture SLS_PRT_COM. This Sturcture have many nested Sturctures. Now I created a Table type ZEBFO with line type VBDPA. VBDPA has many currency and quantity fields such like GEWEI. Now I have c

  • Audigy Se & Prince of Persia Forgotten Sands!!!!!

    Hi AlL.... Somone help me... Today i installed Prince of persia Forgotten sands in Xp Sp3.... The game sound is muffled[lack of detail & treble bass is good] while playing, but on cutscenes it's good but low audio output through out the game..... Ins

  • Download problem with Adobe Flash Player 11

    I downloaded Adobe Flash Player 11 a long time ago, when it first came out; however, every time I need it, I get a window saying I need to download Adobe Flash Player in order to view it. What in the world is happening that it isn't downloaded and th