Magic Mouse & Trac Pad Not Working Properly

How do I get full functionality working on my magic mouse and magic trac pad running in Windows 8 in Bootcamp?

This post must have made me think more. Found the solution. Thanks for allowing me to share some thoughts with you.

Similar Messages

I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

I am facing problem in playing yahoo pool in Firefox 4 while it was working fine in Firefox 3.6. In Firefox 4 the combination of mouse keys are not working properly.

I updated to Firefox 4.01 today and the middle scroll button on my Lenovo T400 stopped working. I downloaded the updated Ultranav utility and the Ultranav driver for my T400 from here http://www-307.ibm.com/pc/support/site.wss/MIGR-72858.html and then uninstalled the "Thinkpad Ultranav Driver" from Add/Remove programs rebooted and then installed the updated utility and driver (another reboot) and it now works perfectly.
So glad to get this working again.

Does magic mouse track pad functions work with OSX10.5.8?

Does the Magic Mouse track pad function work with OSX 10.5.8? Or do I need updated software to use all of the functions?

The Magic Mouse system requirements:
Mac OS X v10.5.8 or later with Wireless Mouse Software Update 1.0* or Mac OS X v10.6.1 or later with Wireless Mouse Software Update 1.0
The Magic Trackpad requires 10.6.4 or later.

Touch pad not working properly for iphone 4s

touch pad not working properly for iphone 4s. Few letters are not working at all and my phone ios slowly loosing touch sensitivity. I lost my phone and got the new phone 10 months back.

Try here > iPhone: Troubleshooting touchscreen response
Also go to settings>general>reset>rest all settings phone will turn off and turn on by itself
Once the phone is press and hold the home and power button at the same time wait for the apple sign then release the buttons phone will turn off and on.
Update the software of your iphone or restore the phone to its factory settings

Magic mouse and trackpad not working

All of a sudden my magic mouse and trackpad stopped working.
I tried everything, preferences, bluetooth config, but nothing works.
Sometimes in the mouse prefpane, I get the message that the mouse is connected, then after a few seconds it shows disconnected.
In Bluetooth config I get the message that the mouse is connected but the wheel keeps spinning and then it says "connection failed. software configuration and bluetooth may be invalid or are not supported".
Same for the trackpad.
My second mac is also seen, and "connected ?" , but when I try to open the connection it fails also.
System is lion 10.7.5. imac 3,6 Ghz corei5 from 2011.

Found out myself how to solve the problem.
Simply resetting the PRAM and everything was ok.
Thanks anyway

Will the magic mouse track pad functions work with OSX 10.8.5?

Will the Magic Mouse track pad functions, i.e. scroll, zoom work with OSX 10.8.5.? Or do I have to upgrade to get those functions to work?

Yes, they'll work with 10.8.5.

MY LAPTOP MOUSE TOUCH PAD NOT WORKING

MY LAPTOP MOUSE TOUCH PAD NOT WORKING

When requesting assistance, please provide the full HP model name and/or product number of the computer in question.
It is possible that the touch pad was accidentally turned off... please looking for a symbol on a "F" key tha look like the touch pad and press it. It is also possible that the touch pad on/off button is located elsewhere on the computer. Once we have the requested information, we will be better able to assist you.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Bamboo Track Pad not working properly

My Bamboo track pad is not working properly. Plugged it in into my macbook pro via USB like usual today and for some reason when I try to use it and begin using the pen tool in illustrator my pointer only stays in the top left corner of my screen and wont move with my pen. This is the first time I have had this problem with my Bamboo track pad. Not sure why it is doing this. My MBP recognizes the track pad but for some reason it just won't work properly. Not sure if I need to reinstall the driver or what? Any help would be grateful, thanks.

Ralph, thanks for the quick reply. All of the Trackpad preference boxes are checked for "Point & Click" except "Three finger drag." Once "Three finger drag" is checked, this action spawns a simultaneous action in the Trackpad "More Gestures" area that changes the gesture for Mission Control from "three finger swipe up" to "four finger swipe up."
Since I am having this problem on an early 2009 iMac, I decided to check-out my 2013 MBPr for the same behavior. Amazingly, all was working well with the built-in trackpad functionality regarding the "double-tap select and drag" until i checked and then un-checked the "Three finger drag" box (in Trackpad preference > point & click). Now my "double-tap select and drag" is BROKEN on my 2013 MBPR.

Mouse pad not working properly having downloaded Windows 8

Hi, having downloaded Windows 8 to my laptop (HP Spectre xt 13-2000ea) the mouse pad has stopped working properly. The "two finger" page down/up and left/right has stopped working.
I have looked at the mouse settings and it currenlty states the synaptics hardware is installed and working correctly.
Have even gone onto the Synaptics website but have been unable to download something that can correct it. The HP hardware updates page on their support website does not appear to have anything that deals with Windows 8 problems.
Any help much appreciated. Thanks

Had exactly the same issue with my HP laptop. The Windows 8 driver installed with the OS works OK but the Synaptics driver in the latest Windows Update will not scroll. I had to uninstall the existing (newest) driver and install the HP Windows 7 driver from this site (an older version) then in Windows Update you have to wait for the Synaptics driver update to be offered (obviously you have to do a manual update and not allow it to install automatically) and then right click on it and select hide update.

Magic Mouse: Scrolling/Swiping not working

I just bought a Magic Mouse for my MacPro. I downloaded and installed "WirelessMouseSoftware.dmg"
Got it BT connected, but the multitouch surface doesn't works. I can't scroll or swipe or anything as it should do.
Any tips for such problem?
Thanks

Alrighty, it looks like I have figured out the source of the problem. The program is called "USB Overdrive." What I did was went under System Preferences, and did a right-click on the USB Overdrive to remove the item from my computer. Turns out that that is not enough. The main problem is inside Extensions. Click on the Apple at the top of the screen, and go to About This Mac. Then, go to more options, and go under software, and then under Extensions. It should take about 10 seconds to load. Once that is done, scroll down to near the bottom of the list, and if you see one called USBOverdrive then open up a new window in Finder. Click on Macintosh HD, and then go to System, then Library, and then Extensions. Find the one called USBOverdrive.kext and drag it to the trash. You may have to enter the admin password to allow Finder to make changes. Empty the file from the trash and restart the computer, and get rid of the mouse from Bluetooth prefs, and then pair it again. That should solve the problem. By the way if you don't have Snow Leopard (10.6.2) run a system update, and if not, then buy a copy, it's well worth the cost.
Message was edited by: Apple Helper

Apple Magic Mouse--right click not working, left-right scroll not working

Brand new out of the box, right click does not work and neither do the left-right swipe. Is it likely I have a faulty mouse, or is there a software update or setting I have failed to find? Running 10.6.4 on brand new MacBook Air. Experts--help please

I have the same issue. My magic mouse is only about a year old and i honestly don't use it that often... it seems to me the right click is not "connecting" well as i have to click several times or very hard to get it to make a clicking sound. not sure if its stiff or broken or not.
Overall I'm pretty frustrated as this thing was EXPENSIVE.
Any ideas how to fix it?

Mouse scroll wheel not working properly in ff5

Since upgrading to FF5 the scroll wheel on my mouse doesn't work properly in Firefox - it's works as normal in everything else, just not in Firefox.
When I try scrolling, the wheel clicks (it clicks when turned) 7 or 8 times before the window in FF will scroll, and even then it only scrolls 2 or 3 lines per click. In all prevous versions of FF it would scroll in the same way as it does in all other programs, ie it would scroll 6 lines per wheel click.
It's clearly an issue with FF5 as it only affects FF5 and is annoying enough to make me start using Internet Explorer, which I haven't done for some years.
Anyone else having this problem?

Sorry, this is not possible in the current version of Firefox, but we have an open bug report where we are tracking this issue here:
https://bugzilla.mozilla.org/show_bug.cgi?id=686228
With luck it will be fixed in a future version.

Synaaptics Touch pad Not working properly

From many days my synaptic touchpad is showing a problem.......when i turn on my laptop my touchpad works properly for nearly three mnts and then it stops to respond then when i go to mouse settings and moves toward the divice settings tab.......and select synaptics touchpad ....and then first disabled it and unable again then again it starts to work properly for few mnts but it stops after few mnts........ again and again i have to repeat the same process to make it to work....... i am too perplexed to do so again and again... i really need to get rid of that.... i have searched alot on differents forrums support but not of any worked for me......please now help me!!!!!!!!
Laptop: HP Probook 450 G1
Original Name: Abdullah Abro
And advance thanks to one who helps me.....!!!!
please make me to get rid of this .......

Hello @venis ,
To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, here is a document on how to troubleshoot the mouse and Touchpad sensitivities.
If you will go to the section on Adjusting TouchPad or ClickPad pointing sensitivities it should help resolve the issue.
Here is a link for your driver Window 8 for the Synaptics TouchPad, if needed uninstall the old driver and install the new.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

My track pad not working properly

Hi Guys
I have been reading loads of forums on trackpads not working due to updates but I only have 10.7.5.
My track pad was working fine all day then when I get home to open computer again it starts playing up randomly selecting folders and wont click.
I restarted my computer checked for udates now I cant click and drag but the cursor and tapping and two three fingers is fine. Any suggestions.
The pad can click all the way to the bottom and if I want to use soming in the top bar I can click on it but nowhere else
Please help

Hello Vikas,
It certainly can be inconvenient and frustrating when your trackpad is acting erratically. I recommend reviewing the following article for an issue like this:
Portables and Magic Trackpad: Jumpy or erratic trackpad operation
http://support.apple.com/kb/ts1449
Thank you for using Apple Support Communities.
Best,
Sheila M.

Re: Satellite L750 - advanced mouse settings are not working properly

Satellite L750 model (One month old). The problem is that every time I start the computer, only works the point device of the mouse synaptics , but retains the advanced settings as pressing with three fingers, turns or you can use the wheel to move up and down the page. The funny thing is that is activated by clicking the mouse icon in the Control Panel. Once I access the icon, the mouse works perfectly and appears in the toolbar.
In Device Management, tells me that works perfectly and that the driver is updated.
Does anyone think of any solution? thanks

Hi
To be honest, I dont really understand what you are talking about.
Do you have problems with the USB mouse or the touchpad?
What device does not work correctly: mouse or touchpad?
The L750 series supports an touchpad with additional feature called Gesture (Multi Touch).
Here you can find nice description on Synaptics page how it works.
http://www.synaptics.com/solutions/technology/touchpad
Furthermore the settings could be found in control panel -> mouse -> Advanced tab
FYI: You can disable and enable the touchpad function pressing the small button above the touchpad surface (On/OFF).

Magic Mouse & Trac Pad Not Working Properly

Similar Messages

Maybe you are looking for