Magic Mouse won't reconnect after Lion upgrade

Okay, I'll lay this out as quickly and consisely as possible.
I've searched every post and site I can find and tried everything suggested, and still no luck.
I have Mac Pro with an external bluetooth dongle, Magic Mouse, and I have just upgraded to OSX 10.7 Lion.
My Magic Mouse has always reconnected flawlessly to my machine after booting or waking, but after upgrading to Lion, it refuses to re-pair after booting or waking.  In bluetooth preferences, I can see in the Devices pane that "Steven's Mouse" is disconnected, but every couple of seconds this will flash green and show "Connected" - but only for a half second - and then it's back to "Not Connected".
I've set BT setup assistant to open on startup, and only when I have manually deleted and re-paired my Magic Mouse using the keyboard does the Magic Mouse connect.
Then sleep and wake and I'm back to square one.
I have:
Restarted after trashing every bluetooth .plist file (~/Library/Preferences and also HD/Library/Preferences) - and bluetooth drivers
Sone several SMC Resets
Zapped my PRAM
Made my mouse a 'Favorite'
Deleted and re-paired it more times than I can count
Turned the mouse on and off
Clicked it
Double-clicked it
Kept clicking it
Turned it on and off
Triple-checked the batteries
Tested my mouse with another machine running SL
Tested another mouse with my machine
- All with no luck whatsoever.  I'm about down to writing a suicide note or something!!!
Any help would be appreciated.
Steven
(BTW I'm 100% sure the issue is within the Lion system somewhere - not my hardware.

Hi, I had the same problem but it's fixed now.  It seems that the order you turn mouse and bluetooth off and on makes the difference.  This is what worked on my macbook pro (eventually!):
turn off bluetooth and mouse.  Turn on bluetooth.  Open system preferences.  Open mouse. It starts searching. then Turn on mouse.  Hey presto! (and much to my surprise) it found it.
It also worked if I left the mouse on, and turned it off and on after opening the mouse in system preferences and it had started searching.  But if, for example, I turned on the mouse before opening system preferences,it was no go.
There is another issue:  I (like I suspect a lot of people) switch between lion and snow leopard (Macbook Pro and Mac Mini respectively), and every time it has to be paired manually. I have found I have to use the entire process shown above with both OSs.
Also, the mouse has to be paired to Lion at every startup.  I never have to re-pair the mouse with Snow leopard on startup (unless it's been paired to Lion in the meantime!). 
I hope that some of this might help someone, even just a little.

Similar Messages

  • Magic mouse no longer works after Lion upgrade

    After upgrading to Lion my magic mouse failed to work. I plugged in an older USB mouse and thankfully it does work. It appears the System Preference for Blue Tooth no longer has my machine name in it, instead it has "Name not available" and the "On" check box will not stay checked when I reopen the preference. The syncing process "Set Up New Device..." doesn't seem to work either, it searches but doesn't find eventually the flashing LED on the mouse goes out.
    I've tried to solve this but failed. I believe its something wrong with the installation of Lion on my iMac because I installed Lion on my lap top and the magic mouse WILL sync with it.
    What do you suggest I do to remedy this situation?

    Solved it myself. Re installed Lion.
    Thanks Radio for your help

  • Quicktime won't work after lion upgrade

    quicktime won't work after installing Lion

    I am having the same problem. Anyone else have this problem and find a solution??

  • Iphoto won't start after lion upgrade

    I installed the Lion upgrade and now I am unable to open iPhoto 09.  Any ideas?  Here is the message:
    Process:         iPhoto [9483]
    Path:            /Applications/iPhoto.app/Contents/MacOS/iPhoto
    Identifier:      com.apple.iPhoto
    Version:         8.1.2 (8.1.2)
    Build Info:      iPhotoProject-4240000~8
    Code Type:       X86 (Native)
    Parent Process:  launchd [8176]
    Date/Time:       2012-01-02 12:43:31.672 -0600
    OS Version:      Mac OS X 10.7.2 (11C74)
    Report Version:  9
    Sleep/Wake UUID: A70FC8E4-B25F-4686-80D4-884636B345CB
    Interval Since Last Report:          1236 sec
    Crashes Since Last Report:           10
    Per-App Crashes Since Last Report:   10
    Anonymous UUID:                      EE8765B0-FA49-422E-9613-08D9A3A796D4
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
      Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
      Reason: image not found
    Binary Images:
        0x1000 -   0x9fbfee  com.apple.iPhoto (8.1.2 - 8.1.2) <436E886C-E26D-2C7D-9745-252829318EFE> /Applications/iPhoto.app/Contents/MacOS/iPhoto
      0xb31000 -   0xb5cff3  com.apple.DiscRecordingUI (6.0 - 6000.4.1) <008D8106-E34E-3F05-AB98-24AAC8344D03> /System/Library/Frameworks/DiscRecordingUI.framework/Versions/A/DiscRecordingUI
      0xb74000 -   0xb76fff  com.apple.ExceptionHandling (1.5 - 10) <7C514CC4-7951-31CA-AEB3-D4AF49F44AE7> /System/Library/Frameworks/ExceptionHandling.framework/Versions/A/ExceptionHand ling
      0xb7c000 -   0xc29ff7  libcrypto.0.9.7.dylib (0.9.7 - compatibility 0.9.7) <7B6DB792-C9E5-3772-8734-8D0052757B8C> /usr/lib/libcrypto.0.9.7.dylib
      0xc6e000 -   0xc78fff  com.apple.UpgradeChecker (1.0 - 1.1) /Applications/iPhoto.app/Contents/Frameworks/UpgradeChecker.framework/Versions/ A/UpgradeChecker
      0xc82000 -   0xd1effc  com.apple.MobileMe (8 - 1.0) <47DF6C20-78C5-1AA2-1D64-274EAE522D93> /Applications/iPhoto.app/Contents/Frameworks/MobileMe.framework/Versions/A/Mobi leMe
      0xd80000 -   0xd80fff +eOkaoCom.dylib (??? - ???) <17ADB0F4-BF83-0B0B-5293-F843F1724644> /Applications/iPhoto.app/Contents/MacOS/eOkaoCom.dylib
      0xd84000 -   0xdb7fe7 +eOkaoDt.dylib (??? - ???) <673BD0C5-FAC4-ABB7-B55E-FD8A75E4759D> /Applications/iPhoto.app/Contents/MacOS/eOkaoDt.dylib
      0xdbd000 -   0xf23fff +eOkaoFr.dylib (??? - ???) <684982FE-55E4-174D-9CF3-DA4319BD57F9> /Applications/iPhoto.app/Contents/MacOS/eOkaoFr.dylib
      0xf27000 -   0xf4bff2 +eOkaoPt.dylib (??? - ???) <E2ED8DE8-7A2D-8309-3CB5-2E87F135A8A8> /Applications/iPhoto.app/Contents/MacOS/eOkaoPt.dylib
      0xf52000 -   0xf99ff7  com.apple.proxtcore (1.0.0 - 1.0.0) /Applications/iPhoto.app/Contents/Frameworks/ProXTCore.framework/Versions/A/Pro XTCore
    0x8fe0a000 - 0x8fe3c9c7  dyld (195.5 - ???) <BCC83F99-7244-3DBA-867D-6226D53DD9F2> /usr/lib/dyld
    0x90a79000 - 0x90d85ff1  com.apple.MessageFramework (5.1 - 1251.1) <9A36CBE7-C9B0-37E3-94CD-0617D81297C4> /System/Library/Frameworks/Message.framework/Versions/B/Message
    0x90dd9000 - 0x9108bff7  com.apple.security (7.0 - 55010) <BE0350C5-5221-3BFF-B674-646AB1BA0F2E> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x9108c000 - 0x911a3fe9  com.apple.WebKit (7534.52 - 7534.52.7) <BC37DBEF-DC40-3FF0-A2EA-7B445FE4A3A8> /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    0x938cf000 - 0x938ddfff  com.apple.opengl (1.7.5 - 1.7.5) <81166D23-DE8E-3938-AAD3-29B1FA5E446E> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    0x93b47000 - 0x93babfff  com.apple.framework.IOKit (2.0 - ???) <D14460ED-2B6C-375D-B3A4-B8C82E922666> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x951e8000 - 0x9534afff  com.apple.QTKit (7.7.1 - 2306) <5A7E5ED0-C4DC-3CEC-ABE0-24899134ACE1> /System/Library/Frameworks/QTKit.framework/Versions/A/QTKit
    0x9562c000 - 0x9570dfff  com.apple.DiscRecording (6.0 - 6000.4.1) <6BD9120F-8128-3B85-8ACB-0924615425DD> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
    0x95918000 - 0x95a27ff7  libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <90D36793-04A5-3BFF-BE83-EEEDCBEDC756> /usr/lib/libsqlite3.dylib
    0x9632f000 - 0x96344fff  com.apple.iChat.InstantMessage (6.0 - 835) <F80F4A61-5EDE-3995-9FFE-49A1AD1BC9D0> /System/Library/Frameworks/InstantMessage.framework/Versions/A/InstantMessage
    0x9638f000 - 0x9640dff7  com.apple.iLifeMediaBrowser (2.6.1 - 502.1.5) <15323460-62E8-39BC-ACF0-E0C3A916C994> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x9697f000 - 0x96b33ff3  libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <6AD14A51-AEA8-3732-B07B-DEA37577E13A> /usr/lib/libicucore.A.dylib
    0x96bb1000 - 0x96bedfff  libcups.2.dylib (2.9.0 - compatibility 2.0.0) <AA56493C-D7C6-3D4F-8DC8-855405AFF57B> /usr/lib/libcups.2.dylib
    0x96bee000 - 0x96beeff0  com.apple.ApplicationServices (41 - 41) <C48EF6B2-ABF9-35BD-A07A-A38EC0008294> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x96bf1000 - 0x96bf1fff  com.apple.Cocoa (6.6 - ???) <5FAFE73E-6AF5-3D09-9191-0BDC8C6875CB> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x99aea000 - 0x99cc0fe3  com.apple.CoreFoundation (6.7.1 - 635.15) <AC9F6462-6315-3D89-8075-D048DB4DBF7E> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x99f29000 - 0x99f29ff2  com.apple.CoreServices (53 - 53) <7CB7AA95-D5A7-366A-BB8A-035AA9E582F8> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x9a146000 - 0x9a3f5ff7  com.apple.AddressBook.framework (6.1 - 1062) <8992D5C7-DC3C-3009-8A9E-A6937B91BB4D> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x9a564000 - 0x9a564fff  com.apple.Carbon (153 - 153) <F996332A-390E-3337-A09E-A1E54004B567> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9a565000 - 0x9a573fff  libz.1.dylib (1.2.5 - compatibility 1.0.0) <E73A4025-835C-3F73-9853-B08606E892DB> /usr/lib/libz.1.dylib
    0x9a828000 - 0x9aaadfe3  com.apple.QuickTime (7.7.1 - 2306) <F8C64DC4-3FE4-3A06-B10B-59E7F3BA6FDD> /System/Library/Frameworks/QuickTime.framework/Versions/A/QuickTime
    0x9b71a000 - 0x9b71afff  com.apple.Accelerate (1.7 - Accelerate 1.7) <4192CE7A-BCE0-3D3C-AAF7-6F1B3C607386> /System/Library/Frameworks/Accelerate.framework/Versions/A/Accelerate
    0x9ba43000 - 0x9ba8afff  com.apple.SystemConfiguration (1.11.1 - 1.11) <CA6CE2B6-DC18-31FF-9668-70BB2FD8D7BB> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.21f4
    Graphics: ATI Radeon HD 2600 Pro, ATI,RadeonHD2600, PCIe, 256 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F1900000000, 0x4D4943533338554642203247422020202020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F1900000000, 0x4D4943533338554642203247422020202020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.11)
    Bluetooth: Version 4.0.1f4, 2 service, 18 devices, 1 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: WDC WD3200AAJS-40RYA0, 320.07 GB
    Parallel ATA Device: OPTIARC  DVD RW AD-5630A
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 3
    USB Device: USB2.0 Hub, 0x05e3  (Genesys Logic, Inc.), 0x0606, 0xfd100000 / 2
    USB Device: Mass Storage Device, 0x058f  (Alcor Micro, Corp.), 0x6366, 0xfd110000 / 7
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd120000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfd122000 / 6
    USB Device: USB Flash Memory, 0x0930  (Toshiba Corporation), 0x6544, 0xfd140000 / 4
    USB Device: External HDD, 0x1058  (Western Digital Technologies, Inc.), 0x0910, 0xfa400000 / 3
    USB Device: hub_device, 0x050d  (Belkin Corporation), 0x0237, 0xfa200000 / 2
    USB Device: HL-5250DN, 0x04f9  (Brother International Corporation), 0x002b, 0xfa240000 / 7
    USB Device: Officejet Pro 8000 A809, 0x03f0  (Hewlett Packard), 0x3612, 0xfa230000 / 6
    USB Device: USB2.0 MFP(Hi-Speed), 0x04b8  (Seiko Epson Corp.), 0x083c, 0xfa250000 / 5
    USB Device: FreeAgentDesktop, 0x0bc2  (Seagate LLC), 0x3000, 0xfa220000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x1a100000 / 2

    You need to reinstall as iPhoto is missing background frameworks required to work.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

  • Magic Mouse Won't reconnect

    I've had this new magic mouse for less than a week. It worked fine until today. I've been turning off the mouse at night. When I woke my computer today, the mouse wouldn't connect. I also tried using my mighty mouse to delete from the Bluetooth preference pain and start the process over. It didn't work.

    Can you tell if Bluetooth is working and devices discoverable (by looking at the Bluetooth icon in the right of the menu bar)? If so, just a guess, but try:
    - turning off the Magic mouse,
    - removing the batteries,
    - if possible test their strength, if standard batteries, they should be 1.5V
    - reinserting the batteries,
    - turning on the mouse,
    - clicking the mouse a few times.
    If this fails and your Mighty mouse and keyboard is working, try to reset PRAM.

  • Safari and iChat won't work after lion upgrade

    I just completed an upgrade to lion on my 2010 Mac mini and after reboot, safari won't open a web page..it just gets stuck with the blue loading bar about 1 inch from the left and iChat won't connect either.  I've repaired permissions and rebooted several times, checked for 3rd party add-ons and still they won't work.  Help! I need Internet again.  I'm posting this on my iPad 2 because I can't get safari to load a page or download another browser like chrome or firefox:(

    OK... i had a quick look around and it seems many peoples various issues were solved by just restarting their macs a few times... i downloaded the java update from the apple support site and then restarted twice and everything now working perfectly.

  • Brand new iMac 27 2011 won't boot after Lion upgrade

    Got a brand new iMac 27 2011 yesterday and did an update to 10.6.8 first before installing OSX Lion over it...
    After restarting it just shows then the "prohibitive icon" on screen and shuts down after few seconds...
    It won't even boot from an USB stick with the OSX Lion image on it...
    Recovery partition works but can't do a reinstall from there....
    So going back to 10.6.8 now...

    Just so you know I purchased brand new imac in July and did the same upgrade as you. I just installed Lion but did not have any issues. Only one concern overall though, it slowed down my new imac a bit. Not sure if there are settings or not but Leopard was faster than this. AppStore, iTunes are eating lot of memory and CPU util goes up.

  • Mail won't send after Lion upgrade and AT&T won't help

    I upgraded my new MBP to Lion and now I can't send mail if I'm on my network at home. After looking at other threads (like this one: https://discussions.apple.com/thread/3192956) and based on the symptoms I'm having, I think the problem is likely an AT&T problem. When I use the Lion laptop on a different network, mail works and I can send mail with no problems. That suggests to me that the network is the issue.
    I called AT&T to tell them this and they feel everything is working on their end so it must be my email client. They want to charge me to talk to tech support because I'm using an email client instead of their web interface.
    Does anyone using AT&T have the same problem? Does anybody know how you get through to a big company like AT&T who isn't listening?

    Hey Kerry,
    Believe it or not, sending mail from home seems to now be working for me. The strange thing is that when I made the change I'll tell you about, it didn't work at first, but now it does. The only explanation I can think of is that I've rebooted my machine since I made the change and that seems to have made the difference.
    Anyway, here's what I did. In Mail, go to File > Preferences > Accounts. Now, select the account in the left pane if it isn't already selected. In the main pane at the bottom you should see an option for TLS Certificate. Mine had 'None' selected so I opened the combo box and saw there was a certificate I could choose (just a big long string of numbers and letters). I chose that, saved my changes, and that was it.
    Like I said, nothing changed immediately after I did this yesterday. But this morning, I can now send mail. So either this change (and a reboot) fixed the problem for me or coincidentally AT&T fixed the issue on their side - I don't know.
    Give this a shot and let me know what happens.
    Jim

  • Mail won't send after lion upgrade

    I've an account on me.com and after upgrading to lion mail app doesnt not send mails. All account settings are correct. Any solutions?
    Or i should to wait until the next update?

    I had the same problem, and tried recommendations that were posted on other threads. It finally occurred to me that I should try signing out and back in on the Mobile Me system preference and it worked. Hope this helps...

  • ITunes won't open after Lion Upgrade

    try to open and get this error.
    Process:         iTunes [2469]
    Path:            /Users/USER/Desktop/iTunes.app/Contents/MacOS/iTunes
    Identifier:      com.apple.iTunes
    Version:         10.7 (10.7)
    Build Info:      iTunes-10702101~1
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [2364]
    Date/Time:       2012-10-10 15:51:36.467 -0400
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          8763 sec
    Crashes Since Last Report:           22
    Per-App Crashes Since Last Report:   8
    Anonymous UUID:                      BCF193B2-012B-4A36-B13F-307E1E0F9658
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
    Dyld Error Message:
      Library not loaded: @executable_path/../Frameworks/iPodUpdater.framework/Versions/A/iPodUpdater
      Referenced from: /Users/USER/Desktop/iTunes.app/Contents/MacOS/iTunes
      Reason: unsafe use of @executable_path in /Users/USER/Desktop/iTunes.app/Contents/MacOS/iTunes with restricted binary

    ive tried to download both the 10.7.5 and the 10.7.4 updates both state do not meet requirements so downloading 10.7.3 now. im also having a java problem after installing it on lion(since i know it does not include) thank you.
    Process:         Java Preferences [2524]
    Path:            /Applications/Utilities/Java Preferences.app/Contents/MacOS/Java Preferences
    Identifier:      com.apple.java.JavaPreferences
    Version:         14.4.0 (14.4.0)
    Build Info:      JavaApplicationSupport-255000000000000~2
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [2364]
    Date/Time:       2012-10-10 15:57:19.875 -0400
    OS Version:      Mac OS X 10.7 (11A390)
    Report Version:  8
    Interval Since Last Report:          9109 sec
    Crashes Since Last Report:           24
    Per-App Interval Since Last Report:  157 sec
    Per-App Crashes Since Last Report:   1
    Anonymous UUID:                      BCF193B2-012B-4A36-B13F-307E1E0F9658
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000008
    VM Regions Near 0x8:
    -->
        __TEXT                 0000000100e3a000-0000000100e3b000 [    4K] r-x/rwx SM=COW  /Applications/Utilities/Java Preferences.app/Contents/MacOS/Java Preferences
    Application Specific Information:
    Crashing on exception: -[NSScreen backingScaleFactor]: unrecognized selector sent to instance 0x7fb660e40570
    objc[2524]: garbage collection is OFF
    Java information:
    Exception type: Bus Error (0xa) at pc=7fff85891acb
    Java VM: Java HotSpot(TM) 64-Bit Server VM (20.10-b01-428 mixed mode macosx-amd64)

  • Keychain won't work after lion upgrade.

    Hi
    I upgraded to lion os and a few things wont work. the keychain opens but when you go to add an item it then says unix error.
    Cannot find a fix.
    Also ical opens then gives an error saying it has no permissions
    aaron

    From the Keychain Access menu bar click Keychain Access / Keychain First Aid. Verify & Repair if necessary.
    Hopefully someone else can offer help for the permissions issue.

  • Logic Express 8 won't startup after Lion upgrade

    Well, today I upgrade my iMac from Snow Leopard to Lion. While trying to startup Logic Express 8, I got the a message saying that this version could not be run with the current OSX version.
    That is strange, because I thought LE8 was an Universal Binary application. Does somebody know what I can do to fix this, except for upgrading to Logic 9 or so?

    Hi,
    1st: The joke's on you. NEVER, absolutely NEVER touch a running system unless you have to. Next time, you'll know. Hope you made a backup?
    2nd: No, sorry, Logic 8 isn't compatible with Lion. You'll have to upgrade to Logic Express 9.1.4, which is the only version that is compatible. Shame on apple for this, but that's just the way it is.
    3rd: Downgrade to snow leopard to run Logic 8 again or buy Logic 9 and upgrade it to 9.1.4.
    4th: Even better: Wait for Logic 10 to appear if you want to save some money. Guess it'll be out sooner or later.
    Fox (will wait for a long, long time before upgrading)

  • Software Updates won't install after Lion Upgrade

    I can't install the iTunes or iWork for Lion update.

    try restarting the computer and the selecting software update from the apple menu, having no other apps open, and click install all, if any fail deselect them and do the other ones, restarting the and doing the ones tht failed after installing the ones that worked

  • After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

    after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

  • Magic Mouse won't work in Windows 7 anymore

    Hey there,
    I've got an iMac running OS X 10.6.8 and Windows 7 via Boot Camp. I just updated a bunch of the Apple stuff on Windows -- iTunes, Quicktime, "boot camp" (I assume that meant drivers and such), and whatnot. Now my Magic Mouse won't work in Windows 7. It was fine before, so I assume the update screwed something up. Help? I know nothing of retrieving old drivers and stuff like that.
    Note: I am running Snow Leopard, NOT Lion.

    Hi bsruff,
    If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
    Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
    http://support.apple.com/kb/TS3092
    Regards,
    - Brenden

Maybe you are looking for

  • Use of special characters in Search String

    What is the use of special charaters like in the search string in the Find & Replace of ABAP editor ? I want to search for all strings starting with V which are followed by alphabets like VA VB... If I use V*, it also gives me results like V/R... Whe

  • Allow popup

    I have disabled all extensions and add-ons and I still can't get a popup window to do a chat from aiowireless.com. I added the website to the exceptions list to allow popups. I also tried by having the popup blocker turned off. Nothing seems to allow

  • Warning while processing the BDC session for ME11 - create info records

    Hi, I have succesfully created a BDC recording(SHDB) for ME11 transaction. but when I am trying to process the session(SM35) with file having correct data, I an getting a warning message" Please check Unit of measure and conversion factor" eventhogh

  • Problems installing java edition

    Hi, I've encountered several problems during the NW04 java edition installation. After several locks, I finally discovered that the 1500 MB database log area was full. I then allocated 3000 MB and got the following error during the 'java database loa

  • Difference in expresscard functionality in a Macbook Pro 5.1 vs 5.2?

    I have a Macbook Pro 5.1 that I'm trying to use with a 3rd party expansion chassis that connects via the expresscard 34 slot. I've used this chassis successfully with several other models of Macbook Pro, but I can't get it to work with the 5.1. Now t