Magic mouse won't work on my mac mini

why won't my magic mouse work on my Mac mini

You need to provide a lot more information. Is it new? Was it paired with another device?
Barry

Similar Messages

My Magic Trackpad won't work on my Mac Mini?

My Magic Trackpad won't work on my Mac Mini? The cursor moves a little and then will not respond at all. Gestures do not work

Yes, it's one of the things that can interfere. Here are some others including airport. Try changing your access point to use 5 Ghz or a lower 2.4 GHz channel.
http://support.apple.com/kb/HT1365
Captfred

After upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down then restore power to get it to function.

after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

after upgrading to yosemite my magic mouse won't work when I wake up my mac mini. I have to power down and restore power for it to function. Also cannot send email from mac mini or iPad.

Magic Mouse won't work in Windows 7 anymore

Hey there,
I've got an iMac running OS X 10.6.8 and Windows 7 via Boot Camp. I just updated a bunch of the Apple stuff on Windows -- iTunes, Quicktime, "boot camp" (I assume that meant drivers and such), and whatnot. Now my Magic Mouse won't work in Windows 7. It was fine before, so I assume the update screwed something up. Help? I know nothing of retrieving old drivers and stuff like that.
Note: I am running Snow Leopard, NOT Lion.

Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden

Problems with Magic Mouse, OS 10.9.2 with Mac Mini (mid 2010)

My mouse connects fine to the computer but I can´t use any magic movements at all. What can be the problem? I use Magic Mouse, OS 10.9.2 with Mac Mini (mid 2011).

Troubleshooting wireless mouse and keyboard issues
OS X: Bluetooth devices become unresponsive

My magic mouse won't work.

I got a low battery warning yesterday & went to change then today. Well, one of the batteries had exploded. I cleaned the area as best I could (it even ate through the cover) but the mouse won't work with the new batteries. Did the acid "kill" my mouse or is it just time to replace it? I got the Magic Mouse right after they came out.

I already cleaned the contacts before I posted. I would think my Magic mouse would last longer than a couple years. I am going to take the remaining package of batteries back to Costco as they are supposedly good to 2016. I will take the magic mouse too so they can see the damage. Now, If I can only get my bluetooth "Mighty Mouse" to pare with my iMac I would be happy. Good thing I have my laptop!

My Samsung Sync Master 225UW's camera (webcam) won't work with my Mac mini

Hi,
I need help making my monitor's webcam work with my Mac mini. I have Mac OS X 10.5. When the computer launches the screen turns on, everything's perfect but the webcam will not turn on when I launch Photo Booth or iChat....what should I do?

That camera doesn't work with my mac either (I'm using it right now with a g4 powerbook, but will try again with my new power mac coming in... though I doubt it will make a difference)
The 225UW is specially made for Windows Vista, and I wonder if it needs a mac driver for the camera or something. We may be S.O.L. I knew that was a possibility when I ordered this monitor. Oh well... pay yer money... take yer chances.

Magic Mouse won't work on mac pro with d-link dongle

For the first time I am very unhappy with a purchase of an apple product. I today have finally gotten 2 of those magic mice; one is a present for my best friend (who is also excited) and the other one I wanted to keep for myself. Not more to say as an introduction.
Before I went back home I tried my mouse on one of my late 2007 macbooks, and after the mm update everything was great. I loved the handling, the style, simply everything about that kewl new gadget. I couldn't wait to get home to connect it to my "big boy", my mac pro, where I usually work on all my tasks in my office.
Since my "bb" is already a bit older (one of the first intel xeons -- 2x2 dual core engines, already upgraded for several times with drives and RAM) and didn't come yet with the internal bluetooth module I have a D-Link DWB-120M USB dongle in use which always has been reliable and so far has connected anything that cried for a bluetooth connection. Till today...
I installed the software update 1.0 on my big boy and started the recognition routine. The name of the magic mouse appeared, it tried to connect, but then broke up with something I've never seen before: "The pairing attempt was unsuccessful. Click "Continue" to try again."
I clicked "continue" for several times, read all the trouble shootings around the globe, reconnected it to my macbook (where it still worked fine and said, batteries are 100%), and finally must face the fact that maybe the dongle (or the procedure with it) must be the reason for the failure.
I am not really a dull-one; so I finally understand that the D-Link DWB-120M from 2004 might be inoperable in regard of the magic mouse. My bluetooth logi mouse still works with it, but I cannot make the magic mouse work at all.
So I want to ask into the big bubble if there are people around who could make the new mouse work on on a xeon mac pro with only a usb dongle, and which dongle it would be.. I already tried the support pages of D-Link, but, hey, ...should I really install IE6 or 7 on my mac to get support there??? I guess not.
Any hint is appreciated. I gladly will get myself a working usb dongle for my big boy, which would make the magic mouse work on it.
Thanks for your attention. Please add your experiences to my thread; maybe they're more people who would love to take advantage of your experiences.
..Blinky shiny magic mouse awaits its first job on big boy..
Take care
P

PS: I run 10.5.8 on all of my macs. I didn't upgrade to snow leopard yet, which I expect would not change anything until the mouse update has been done on all of my macs.
Thanks again
P

My wifi won't work on my mac mini but works on my other devices?

Ok so I'll try to word this as best as possible. Basically, my family recently got a new wifi network. It works perfectly fine on my iphone, ipad, and all of my family member's macs, phones, and ipads. When I used my mad mini for the first time since getting a new network, the wifi won't work on it. it says i have 3 bars when I am connected to the new network, but when i try to use safari, it won't load. i even tried using chrome so the browser is not the issue. what do i do to fix it? i've already tried restarting my computer and all of that stuff.

I can't post a screenshot because the internet on my conputer doesn't work. I'll just type it out:
(Network Name)
DIsconnect from (Network Name)
IP Address:
Router:
Internet: Reachable
Security:
BSSID:
Channel:
Country Code:
RSSI:
Noise:
Tx Rate:
PHY Mode:
MCS Index:
and on the dns servers is just says:
under dns servers it says: 10.0.1.1
and under search domains it says: brittanyroad.com

My magic mouse does not pair with my mac mini help please

i get a error message pairing unsuccessful i have paired it ok with my Macbook AIr ok

If the mouse is paired with the Air, you will need to delete from there before it will pair wiht the mini. Bluetooth devices may be only paired with one thing at a time.
Barry

Magic Trackpad won't work with Magic Mouse on brand new 2011 27" i5 iMac

I have a brand new 2011 27" i5 iMac which I bought with Snow Leopard pre-loaded. Naturally, I included the new Magic Trackpad in my purchase, and though there were some problems with the device in SL - such as it going haywire without explanation - it generally worked, although battery levels were erratic (one day 80%, then an hour later 42%, then 80% again).
When I installed Lion I did a clean install after backing up to Time Machine - and a Super Dupered external drive. I had some difficulties trying to install Lion from an external flash drive so I deleted again and reinstalled SL, then reinstalled over the SL install I did (with no other software except Mac OS X 10.6.8 and other system updates to facilitate install). Rather than copying apps from my old SL drive, I downloaded fresh copies and reinstalled one by one. I don't use a lot of apps apart from Microsoft Office, browsers and iLife and have not installed any additional scripts, extensions or add-ons (like USB Overdrive). It's a pretty clean install.
Since then, although I'm generally happy with Lion, the Magic Trackpad won't work! It does work for a little while with basic gestures - mainly moving the cursor and scrolling - then it gives up the ghost and loses connectivity. I have done the following:
Disconnected and reconnected the MTP after turning it on and off. MTP works for about two minutes, goes crazy then no response.
Shut the computer down, pulled out the plug, waited two minutes, then started up again. MTP works for about two minutes, goes crazy then no response.
Run Onyx, shut down computer, then pulled out plug (see above).
Checked options in Universal Access, shut off "Ignore other devices when trackpad in use" (or whatever the option is). MTP works for about two minutes, goes crazy then no response.
Turned off the Magic Mouse. MTP works for about two minutes, goes crazy then no response.
But none of this seems to work! I know the MTP is connected because I can see it in the BT menu in the menu bar and also in System Preferences. I have noticed since upgrading that my permissions - which when I bought the computer were totally clean - now run lines and lines about "Library/Core Services" so I am unsure whether this is related. I also notice a lot of people are in the same boat as me, which makes me wonder if it's either a hardware issue or a release issue - after a week or so of totally silent running, my 2TB Hitachi HDD started up with the grumbly tum. I'd really appreciate any tips from anyone out there!

Hi, marksaner
You could try installing the latest version of the Synaptics driver. Synaptics is the company that makes the UltraNav driver and drivers for many other computer brands. This driver should have the same functionality as the UltraNav driver, so there's no worry there. You can find the driver here.
Hope it helps,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Bluetooth mouse won't work in windows

I have a microsoft bluetooth notebook mouse 5000 that works well in mac osx but when I go to windows 7 in bootcamp it reports that the bluetooth hid device driver is not working and the mouse won't work.
I can get it to detect the mouse and try to load the driver but then it says that the driver installation did not work.
In device manager the bluetooth hid device has a warning icon next to it and it says that the device is not working.
When I try to use my magic mouse in windows the same error happens and it says that the hid bluetooth device driver is not working.
Both mice work fine in mac osx and the microsoft mouse was working ok in windows until last week.
Since then, my son installed a couple of games in the windows side and the mouse started acting up the following day.
Any advice would be very appreciated. Thanks.

Hi!
I suffered this problem time and time again, I kept on pairing/un-pairing/re-pairing etc. and then for no reason at all it suddenly worked. What happened I do not know. Be patient. First off use a wired keyboard and wireless mouse and if that works stay with it for a while. Then try both wireless. I found my mouse was more temperamental than the keyboard. You may have to try wireless keyboard and wired mouse (USB into the computer direct).
Good luck let me know how it goes.

Suddenly my magic mouse won't track properly, can anyone help?

Suddenly my magic mouse won't track around the screen properly, can anyone help? It was working fine then it started sticking. It scrolls from top to bottom fine just the on screen movement is effected. The battery is showing 100%, I've changed the fast/slow slider all the way to the right which has helped a little and unpaired it from bluetooth then re-paired it, did an SMC shut-down, cleaned ball, battery points but it still does not feel totally right? Am I missing something?

hi, i had the same problem.
i just put my mac into sleepmode
apple logo left corner --> first option above restart
then i connected my magic mouse ( holding the button)
and then it worked
i hope it is working for you too

Magic Mouse won't stay paired with booth Boot Camp and Windows 7

So I have a Broadcom Bluetooth 2.1 dongle on Mac Pro 1,1, Lion, Boot Camp 3.3 and Windows 7 latest service pack and latest drivers/operating system. Everything is up-to-date.
My problem started with Windows 7 not wanting to pair with mini alluminum keybord AND magic mouse. I followed a post somewhere and I was able to get the keyboard to pair and work when I switch between Lion and Bootcamp Windows 7 by removing it from Bluetooth Prefs in Lion, adding it to Windows 7 BC, and then adding it again in Lion.
However, magic mouse will still work with onlly one: If I add it to Windows 7 and then restart to Lion, add it there and then restart in Windows, it shows as paired in Windows but it does not respond. I then remove it from Windows 7 and add it again, and it works. Then I reboot in Lion. It is on the list, but not connected. Even the option to connect is not available. I try restarting the mouse, no luck. The only way I can get it to work in Lion again, is to remove it and add it again. Now, I go back to Windows 7, It is there on the list, but it does not respond. In short, the Magic Mouse only seems to want to stay paired (or work) with either Win 7 or Lion. Getting it to work with one cancels the other.
BTW, every time I pair it with Lion, I set it as a Favorite.
Any suggestions?

Some more info I have gleaned from my 13" white Core 2 Duo Macbook (not sure what generation - came with Tiger though). If I uninstall the Intel graphics drivers, the Sleep option is gone from Windows 7 but it will hibernate, and when resuming from hibernation the screen comes back on. However, when the Intel drivers are reinstalled the "screen off" problem is present for both hybernate and sleep. Two other data points: the power manager can't turn off the screen (after X minutes, etc) and I can't get any picture on an external monitor either. Just wanted to share.

Double Click on Magic Mouse No Longer Works after 10.9.1 Mavericks Upgrade

I just recently updated to Mavericks 10.9.1 and once the computer restarted, I noticed that double-click on my Magic Mouse no longer worked. I searched the forum and couldn't find anyone experiencing this. I also went into System Preferences --> Mouse but there is nothing about enabling double-click or adjusting double-click speed on there.
Would appreciate if someone were able to help me solve this. Thanks!

Try resetting the PRAM.
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Magic mouse won't work on my mac mini

Similar Messages

Maybe you are looking for