Magic mouse

Hello:
I upgraded to 10.8.3. on 2013-03-25. I'm getting erratic behavior such as:
The Magic Mouse features such as scrolling no longer work. Tapping or pressing gets the commands shown in the .png. Right click to select no longer works. Just moving the mouse across the pad reandomly increases or decreases window size, etc.
Yes,I have gone to Mouse under Preferences and selected/deselected the appropriate boxes. Battery is not an issue.
The track pad works fine, no undesireable changes.
Any thoughts?

In the above post I said I upgraded to 10.8.3. I should have said that new security measures were available and I upgraded to these: at this point my magic mouse started 'misbeaving'. Thanks

Similar Messages

Magic Mouse and Employing Pinch to Open and Close Feature

I have purchased a magic mouse and would like to employ the "pinch to open & close" features (option on multi-touch trackpad) with the magic mouse. This is not the same as zoom (e.g. hold control key with mouse wheel).
I have tried using bettertouchtool and magicprefs, but it appears that neither accommodates this feature easily. If there were a keyboard shortcut to employ this feature then I think I can assign it to a magic mouse gesture via BTT or Magic Prefs, but I cannot find such a keyboard shortcut.
Does anyone have any ideas?

It could be you are approaching it incorrectly.   It can be a tricky little gadget that actually works with minimal pressure.
Try turning over the mouse so the compartment panel faces you, optical sensor topmost. Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards.   The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place.   Remember to move the small switch next to the optical sensor upwards which should turn on the green light.   Then click twice to connect.

My magic mouse scrolling is stuttering in safari 5.0.5. Can anyone help?

Hi all,
This has been a problem for a while now but am finally getting around to do something about it. I've increasingly noticed that when scrolling in Safari 5.0.5 it becomes stuttery/jittery using the magic mouse.
I've updated everything (OS, updates etc...) to the latest versions, have plenty of space left on my HD.
Does anyone have suggestions to get it fixed? Smooth scrolling is selected in mouse preferences.
Kind regards,
Jack

Same problem here. As well, every few minutes, the mouse doesn't scroll at all until I've scrolled up and down two or three times. Other forums have posts about this problem, too. Things that didn't help:
• quitting/restarting Safari
• restarting
• resetting PRAM
• turning off smooth scrolling
The problem occurs independently of:
• Flash websites
• complex pages
• currently loading pages (active, or background tabs)
• any other wireless activity

Is there a way to open the notification pane using magic mouse?

Is there a way to open the notification pane using magic mouse? i mean it would be great if i could two finger swipe to the right for the notification pane (two finger swipe left opens dashboard)
I have Magic Prefs if it helps

It doesn't seem like this is possible in 10.9.1. Can someone at Apple confirm or provide a solution?

Falta ao Magic Mouse compatibilidade de hardware para o terceiro click! Aplicativo consome muito processamento da CPU. Haveria como a Apple tornar este um gesto padrão?

Caros,
Existem diversos programas que utilizam o terceiro click como atalho de comandos, principalmente os de criação e edição em 3D.
Estes atalhos realmente aumentam a produtividade do trabalho no software: zoom, orbit, pan, etc...
Entretanto, após adquirir um Apple Magic Mouse tenho de me abster de usar estes atalhos, causando uma grande lentidão na produção.
Tentei instalar aplicativos que fazem a interpretação de outros gestos no mouse a fim de suportar tais interações.
Entretanto, há o consumo de quase 10% da carga da CPU nesta tarefa! Não há condições de trabalho com os diversos "soluços"do sistema, além de que estes aplicativos falham na interpretação constantemente, tornando a solução inaceitável.
Acredito que com uma adoção via hardware do terceiro click, com um gesto nativo do próprio mouse, traria grandes benefícios para todos que utilizam este Magic.
Alguém sente falta, ou sou apenas o único?!

Dont work the left click of magic mouse

hi
when i want open a folder or a file the button left of the magic mouse don't work. the rare thing i can close programs or click on a link.
please help me

Take a look in system preferences > mouse and see if your mouse buttons are enabled.

Can anyone tell me why my apple magic mouse isn't working on my computer i've tried new batterys but it still doesn't work

I bought a macbook pro and apple magic mouse 6 months ago and it has worked in the past, but when I tried to use it earlier it doesn't work. The macbook seems to recognise it but when you move the mouse the curser stays put. The track pad still works though, any sugestions?

I bought a macbook pro and apple magic mouse 6 months ago and it has worked in the past, but when I tried to use it earlier it doesn't work. The macbook seems to recognise it but when you move the mouse the curser stays put. The track pad still works though, any sugestions?

Is anybody else struggling with an intermittent connection when using the Magic Mouse/Trackpad ONLY on Boot Camp?

Hi,
I've seen thousands of posts about Bluetooth connection issues and interference and stutter/lag for both the Magic Mouse and Trackpad (affecting both Mac OS X and Windows under Boot Camp) but my problem is different.
To summarise my setup, I use:
- Retina MacBook Pro (lid closed or open, doesn't make a difference to this problem)
- Thunderbolt Display
- Wireless Keyboard
- Magic Trackpad (have also tried a Magic Mouse and experience similar issues to the Trackpad)
And in Mac OS X, everything works perfectly. The keyboard and trackpad work smoothly when I'm 6-7 metres from the machine, whether or not the laptop lid is open or closed, and whether or not the Thunderbold Display is connected.
But on to my problem: the bluetooth connection is incredibly unreliable/intermittent when in Windows (I run Windows 7 64-bit and Boot Camp 4.0, and got both devices connected without any trouble via Bluetooth).
But during usage, the cursor stutters/lags frequently, and tap to click (when enabled) seems to get triggered by mistake all the time (even when I'm not touching the Trackpad or even at the computer, clicks get registered).
The Wireless Keyboard is perfect, and works well 5 metres from the machine. The Mouse and Trackpad, though, don't even work reliably when they are 6 inches from the machine. The built-in trackpad on the laptop works perfectly too, in Windows and Mac.
I spent a week assuming I was suffering from Bluetooth interference, so I tried:
- using the laptop with the lid open
- removing the Thunderbolt display completely and trying the Magic Trackpad
- repositioning items on my desk
- disabling wifi
All of these adjustments made minor differences to how good/bad the Trackpad was, but none came close to fixing the problem or making it work as smoothly as under Mac OS X. It was only after doing all of this that I realised perhaps it was just a Apple driver for Windows issue, so I booted into Mac OS X and tested everything out, and sure enough, it's all perfect. But back into Windows, the Trackpad doesn't work reliably at all.
Obviously, the hardware is not at fault, and I assume the signal strength doesn't vary between operating system (why would it?) so I'm left believing this must be a driver issue. The TrackPad and Magic Mouse drivers have been out for a couple of years, so I'm surprised they can still be this bad. I tried both the latest driver from Boot Camp 4.0 (3.2.0.0) for the Trackpad, and also the older one from Boot Camp 3.2 (3.1.0.7) and both are equally bad for me.
So my question is: has anybody else struggled with using the Trackpad (or Magic Mouse) with Boot Camp 4.0 and Windows 7 64-bit, whilst finding it to be perfect under Mac OS? I haven't found many posts complaining about the Windows driver, which is why I assumed it was an interference issue. But I'm almost sure it isn't, having spent 2 weeks investigating.
Any thoughts/suggestions/answers much appreciated!
Kyle

SOLVED!
After much testing, I have found the cause of lagging/jumpiness on the Bluetooth Magic Mouse and Magic TrackPad in Boot Camp. Hopefully this will help others:
The drivers for the Broadcom 802.11n Wireless Adapter have a setting called "Bluetooth Collaboration" that is Disabled by default. Enabling this option removes the problem instantly. My Magic Trackpad now works flawlessly, even if I stand 6 metres from the machine. It now works just as well as under Mac OS. The setting can be found under:
Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK.
I narrowed the problem down to the wireless card by disabling ALL startup services and processes for Windows, then re-enabling one by one. As soon as I enabled the Windows Wireless Service, the problem came back. Similarly, disabling the Wireless Card inside the Network and Sharing Center (or Device Manager) removes the problem. This led me to believe it must be a driver issue with the wireless card, since the problem didn't occur with the Magic TrackPad under Mac OS, or on my mother's Windows 7 64-bit computer. So when I went into the Driver Properties to check for an update, I found this setting about Bluetooth Collaboration.
I really hope this helps others trying to use Bluetooth devices under Boot Camp. All Apple notebooks use the Broadcom card (and have done for years), so this driver is installed for almost anybody using Boot Camp on an Apple notebook. I'd assume this problem would affect anybody using Boot Camp + wifi + a Bluetooth device.
Cheers

Cannot get Magic Mouse to work in Windows 7 64-bit using Boot Camp

I recently purchased a Magic Mouse and installed it on the Mac OS X partition of my MacBook Pro. After successfully installing on the Mac side, I switched to Windows 7 Ultimate 64-bit using Boot Camp to install on the Windows partition. When I try to "Discover" a new Bluetooth device, the Magic Mouse does not show up in the list of devices (the mouse is powered on and next to the computer).
I am using the most recent version of Boot Camp (3.0.2) and have updated Windows 7. Has anyone else experienced this problem? If so, is there a fix for it?
I appreciate any help!

OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

My magic mouse is now jumping around every time I pick it up / put it down. It started in the last few days. Any ideas?

Hi all -
I looked around the forums and couldn't find an existing solution...
This afternoon, I started using my Magic Mouse again, after about a week without turning it on. The mouse now jumps around erratically and sends spurious click commands - menus pop up all over the place, links are clicked, apps opened, etc. Usually it takes the form of the mouse jumping 1-8" to the left, and it seems proportional to the impact - if I put it down normally, it jumps about 4" to the left. If I put it down a little harder then normal, it usually jumps to the upper left corner.
This ONLY seems to happen when I pick up the mouse to reposition it on the mouse pad. If I slide it smoothly along the pad, then there don't seem to be any issues.
It has been in my backpack, and was turned on (I realized this afternoon when I took it out), so I wondered if it might have been the batteries. I checked them, and they're fine. It also had trouble connecting, though, and I had to cycle both the mouse and BlueTooth on the MBP.
I also saw several posts here that said it might be the optics, so I tried blowing those out, but they look crystal clear.
Just to be safe, I also updated the Wacom tablet drivers to the latest, no luck.
MBP (July 2011) 15" i7, upgraded to 8 G RAM
Lion 10.7.4
Magic Mouse
Wacom Intuos 5 tablet
no external monitors
It's possible this started when I installed the Wacom drivers, since it 'feels' kinda like using a tablet in absolute mode, rather than mouse mode - but with the mouse hardware. I have not tried swapping out the mouse for another one, nor tried this mouse with another Mac. I can try those in the next few days when I get an opportunity, but figured I'd ask in the meantime.
I'm suspicious of either the Wacom tablet (but I can't imagine there would be a problem, as SO many people would have experienced it already).
I'm also suspicious that maybe something has been jiggled loose inside the mouse, but have no idea how to tell.
Can anyone save me a trip to the (distant) genius bar?
Thanks!
Aaron

hey try a smc reset
EDIT (smc reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.)
if that doesnt help look at replacing the batteries in your magic mouse and try it then
if the issue still presists take it into a apple store and they can test it there to see whats up

I use an iMac (27" 3.4) and have problems with the Magic Mouse. It does not use contact, but opens useless and unrelated submenus with every click, even on the empty desktop. I can't shift, open or close pages. Has anyone out there the same problem?

I use an iMac 27" (mid 2011). Until recently I had OSX 10.6.8 installed, but both, the HDD and SSD had to be replaced, and I lost all the memory.
After the repair through Apple Care I had OSX 10.7.5. (Lion) installed, which developed a Magic Mouse problem.
Unlike with most users, I have no problems with connection, but grapple with a different kind of erratic behaviour.
All fancy stuff is turned off in the mouse preferences. When I try to move, open or close pages, unrelated submenus pop up and hinder the
required task. No matter how often I click, these menus stay there, and they even come up when clicking on the bare desktop.
It renders the mouse absolutely useless, as no work can be done with it.
The first 'Magic Mouse' had depleted batteries every few days, despite switching it off after use.
I was supplied a new Mouse, which does better battery-wise, but the problems are the same. I can't get a result by clicking on any link, due to
the pop-up menus, so both 'Magic Mice' are totally useless.
At present I am using the old USB mouse from my Mac Pro, and that works still o.k.
The problem are not the mice, but the software. The first 2 weeks after installation of OSX 10.7.5 the Magic Mouse worked though.
I have no idea as to what the reason may be.
Has anyone in the community ever experienced that particular problem. Any hint would be welcomed.
Thank you!

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Most of the time when i click my magic mouse on an item it gives me options like back, open new page, etc.

When I try to use my magic mouse, most of the time it won't open an item but instead will give me options like: back, open new page, open link in new window, and I am actually on top of for instance, the comment field in facebook...It takes several attempts of clicking off the entire page to get it to just open the link or respond appropriately...

the mouse performs a right click instead of a left click. Check your mouse preferences in the system settings.

Scrolling and rightclicking with magic mouse doesnt work anymore

Suddenly scrolling and rightclicking with magic mouse doesnt work any more. Left clicking and cursor moving works normal. I have checked the system preferences for the mouse and find nothing strange or unchecked. Any ideas?

Also tried the universal access thing. Doesnt work.

Magic Mouse and Windows 7: Discovered but will not Connect.

Windows 7 (W7) can "Discover" the Magic Mouse (MM) but doesn't seem to be able to connect. Here is asolution.
1. Turn Off your MM.
2. Restart W7
3. Connect a "Wired" USB mouse. (My Track Pad would not Right Click.)
4. Open "Hidden Icons". (In the Right lower corner of your dispaly, in the "Tray" is a small "Triangle" icon. Mouse over this and you will see that this is the "Show Hidden Icons" icon. Click on it.)
5. You should now see a Bluetooth icon. This is the "Bluetooth Devices" icon. Click on it.
6. A Pop Up Menu appears. Click on "Add a device."
7. Turn on your MM.
8. Your MM should appear in the "Select a device to add to this computer." window.
9. It will probably just say "Mouse" or "Bluetooth Mouse" If you have used your MM before on your Mac, it may display your Mac's "Short User Name". This means that W7 has "Discovered" your MM.
10. Right Click on your displayed device.
11. Click on "Add device..."
12. Click on "Properties"
13. Select/Click on the "Services" tab.
14. Tick the "Box" for "Driver for mice, keyboard, etc. (HID)"
15. Click "OK" and exit.
Your MM should now work! Sort of!! Left & Right Click works and Up and Down scrolling works. Right & Left scroll does not.
Also, you will note that your MM becomes "Inactive" after a few seconds of disuse. Just give it a single Left click to get it going again. I've posted a solution to this problem in another post.

Thanks! That fixed my issues with my Apple bluetooth mouse and keyboard in Win7.

Magic Mouse and Bluetooth

I just bought the new Magic Mouse as a gift for a friend and after watching him use it I'd like to get one for myself. Problem is my Mac Pro isn't installed with Bluetooth. Does anyone know: can I just buy a USB Bluetooth adapter and plug it into the Mac Pro or do I need a serious upgrade/install? And if a simple adapter is enough, is there a recommended brand?
I'm open to all sorts of suggestions.
Thanks,
Alan

The only adaptor I ever tried was the D-Link. I opted fro the internal bluetooth module for my Mac pro. Its not a serious upgrade. its rather easy. You can find instructions on the internet. Just make sure you purchase the proper one. It will work so much better.

Magic mouse and Macbook Pro Sleeping issues

Since I upgraded to Lion a few months ago, I've noticed that occasionally my Macbook Pro (early 2010) won't sleep when I close the lid. I think I've narrowed down (at least one of) the cause(s): if I turn off my bluetooth Magic Mouse after the lid is closed, the computer won't sleep. In fact, it will run hotter and hotter with the lid closed and, when I open the computer, it's non responsive, necessitating a hard reboot. I've checked the pmset log and I see the EHC2 (bluetooth mouse) waking the computer immediately after the clamshell sleep. Has anyone else seen this problem (I've seen similar things on the foroum, but not quite the same) and does anyone know what to do about it?

Repair disk permissions. Open this app:
Applications > Utilities > Disk Utility.app
Ensure your current volume is selected in the left hand column. Click 'First Aid' (if its not already selected), then 'Repair Disk Permissions' at the bottom.
Ignore the various warnings that come up in the 'Details' window, so long you get a message at the end saying 'Permissions repair complete'.

Magic mouse

Similar Messages

Maybe you are looking for