Magic Move Doesn't Work

I am having trouble using Magic Move in Keynote '09. When I duplicate the slide and content, it works when I move only, but if I try to scale it, the transition fades out and back in to the new location. It doesn't create a smooth transition from one scale to the other like it usually does?
Any assistance with this would be greatly appreciated.

Thanks for your help.
I checked everything you mentioned and none of those solved the issue. The item is an image without any text on it. I even took a completely different image and the same thing happened... so it doesn't appear to be a result of the image itself. The problem carried over to the new image? However, when I used a completely new slide and dropped the same image into the slide as if I started from scratch, it seemed to create the magic move transition. I also copied in all the text from the previous slide.
I'll go ahead with that hack, it's not really a solution, but it will have to work for now.
Still curious what the problem was, but thank you for your assistance. If you still have an idea of a solution, I would love to know in case it comes up again.

Similar Messages

Magic move doesn't work anymore

Hello everybody,
after opening a presentation (I had prepared in Keynote 09) in Keynote 6, magic move is no longer working.
Any help you might provide? Is there a user manual for Keynote 6?
Humble thanks,
Oliver

Could you walk me through the steps? Perhaps I'm looking for "Magic Move" and it's not there. There are three tabs in animation afterall.
Never mind. I was missing an important step, like "duplicate the slide."
Message was edited by: theminibishop

My apple magic mouse doesn't work in windows 7 after installing maverick os x

My apple magic mouse doesn't work in windows 7 after installing the maverick operating system on my mackbook pro. How do I fix this problem?

Hi bsruff,
If you are having issues with your Magic Mouse in Windows 7 via Boot Camp after upgrading to Mavericks, you may find the following article helpful:
Apple Support: Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
http://support.apple.com/kb/TS3092
Regards,
- Brenden

Magic Charger for the Magic Mouse doesn´t work

Hi,
I´ve recently did my first purchase on the apple store,
I´ve bought the magic charger from mobee for the Magic Mouse,
which has been working all good with the normal batteries,
but since I´ve install the new magic charger batteries I just can´t make
work the magic mouse, I´ve plug the magic charge into a usb from the iMac 24"
I´ve wait almost a day so tha the Magic Mouse charge the batteries than
when I switch on the Magic Mouse doesn´t work, the green light from Magic Mouse stands off,
so obviously the bluetooth from iMac 24" doesn´t recognize Magic Mouse,
¿Any suggestion?
Thank you very much in advance.

Hi Allan Jones,
I don´t know under with authority you´ve answered this thread,
but and don´t get me wrong, your message was completely worthless.
Since I did a purchase on the apple store, the apple store should answer
for every inconvenient with the product than I did purchase, and as Apple
is a big multinational who cares for his customers, they did so Apple store sended
special transport to my home to get the malfunctional Magic Charger and than
they send me a new one which seems would work fine.
Thank you very much in advance.

Bluetooth keyboard and magic pad doesn't work after sleep

This only recently developed, once my 2013 iMac goes into sleep mode, when I tap the keyboard to wake it up to put in my security password, the bluetooth keyboard doesn't work. Also, the track pad shows no point, i.e. I have a sign in screen, but can't sign it.

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
-Griff W.

Swipe left and right with magic mouse doesn't work in safari

Hey there,
I accidently deleted something in the navigation bar in safari.
Now when i swipe left and right with my magic mouse, it doesn't go to the previous pages anymore. But the wierd thing is it still works with my magic trackpad.
And even wierder the swipe left and right of my magic mouse still works in other programs.
So can anyone help me with this?
Thanks in advance!

Check Gestures in System Preferences > Trackpad
It's working here on Safari 7 / v10.9 Mavericks

Director movie doesn't work online in Firefox

When I publish movie it works fine locally both in Firefox
and IE. But when I upload it to the server it works fine only IE,
in Firefox it freezes during execution and I can't figure out what
causes that. The movie loads external 3D model and XML through
XMLParser. I suspect that there is smth with loading and/or parsing
XML file, but again - it works fine in IE.
Any ideas why this may happen in Firefox?
Thanks.

What does the Adobe test page say?
http://www.adobe.com/software/flash/about/
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See also [[No sound in Firefox]] and [[Video or audio does not play]]

.mov doesn't work!

Dear Common Wisdom:
I have a Keynote presentation that I exported as a .mov.
Then I put the .mov file in an iWeb movie template.
I export it to a folder and them upload it to my site.
The problem is that it works fine when I run the page locally, but the uploaded version has two problems:
1. The QuickTime bar for pause, start, stop and sound disappears, and
2. the .mov file stays on the first frame of the Keynote presentation, repeating it over and over again.
It's here: <http://web.mac.com/terssfrc/Access_Online_Presentation/Online_Access_to_Manuscripts_Containing_ByzanitneChant.html>
Thanks in advance for your suggestions!
papa-kostas

Autoplay was not chosen, while show movie controller has been chosen from the very beginning, which is still a mystery to me.
As previously explained, there is also a "Controller" setting embedded within the movie file itself which appears to override your iWeb setting. This is what it looks like:
I have downloaded your file, changed both the "Fullscreen" and "Controller Type," and posted the movie back to the internet. As you can see HERE, if you wait for the file to completely cache, the movie controller is now visible.
Maybe these are bugs in iWeb?
As to the movie not fast starting, it appears that your movie will not play until the entire "Sprite" track has downloaded to memory. Since the tracks are processed in parallel and not sequentially, the entire interactive slideshow must be downloaded before the viewer can play it. Since you modified the movie to make it interactive and the player is working as it was designed to to, I would not consider this a bug. However, as interactivity is not an are of expertise for me, would suggest you check out QuickTime Kirk's site (often posted in the QT forum area) for possible interactivity alternatives.

Rotate movie doesn't work!

I'm trying to rotate a .mov filmsequence in my recently installed and upgraded(PRO) Quicktime 7.5.
When I open the film and go to <window <movie properties, it doesn't look anything like the window featured on the apple website and gives me no option to rotate the film.
Anyone knows why? Is 7.5 not the latest version? why can't I rotate?
PLEASE give me a clue, this is the only reason I bought the QuickTime software.. :o(
/elin

Open the file and then open the Movie Properties window (Control-j).
In the Movie Properties window "highlight" (single click) on the Video track and you'll notice the lower half of the window updates to show more options.
Click the "Visual Settings" tab of that lower part of the window to use the rotate feature. Use Save As to make it part of the new file.

Magic Charger Mobee for Magic Mouse doesn't work with Mac OS X lion Mountain

The Magic Charger Mobee for Magic Mouse Apple
with Mac OS X lion Mountain
makes connections overflows and stops the system work.
What could I do, other that disconnect Magic Charger?

When you say you cannot add the printer, with the Add Printer pane open, is the 6250 visible in the Default Add Printer view? If no then it could be the USB cable at fault and I suggest you try another cable.
If the printer is visible but the Mac fails to locate a driver when you select it then you may have to trash the contents of the BJPrinters folder (HD > Library > Printers > Canon) and then run the iX6250 driver installer again.

Magic Mouse doesn't work as it should

Hello everybody,
after reading tons of docs and forums without finding a solution I tell my problem to you:
some days ago I got myself a Magic Mouse. Aiming to use it with my Macbook Air running Lion (all updates installed) I paired it but I only got a very basic menu. No scrolling options, the only things I can adjust is the double click and the pointers speed. The sexiest mouse in the unverse behaves like something I bought at the radio shack for 2,50 €. Then I paired this mouse with my Mac mini (Snow Leo, all updates) and everything worked well. Going back to my MB Air I recognized that the mouse had been renamed by my Mini, but nothing else happened. I just can't get it running the way it should. I read some tons of docs and did the following:
- removed the batteries
- did a pvram reset
- removed the non-apple kernel extensions
- erased com.apple.bluetooth.plist and lockfile
- installed the MacOSComboUpdate several times
- checked my MBA for apps like USB overdrive and uninstalled anything
Nothing helped.
Before I go berserk, has anybody any suggestion how to proceed now?
Thanks in advance

Hello X423424X,
thanks for your hints. Unpairing the mouse from the MM at least gave it back its old name. I did the smc reset - at least I pressed the right keys, but there was no feedback about it - but the result is still the same. Uninstalling Onyx, Deeper, Fink and CoolTerm was useless too. I installed MagicPrefs today and it recognized the mouse as a magic mouse, I can configure it there, but the functionality still isn't there . All I get is this:
I think I'll continue uninstalling. Maybe I find out that keynote smashes my system.

Magic mouse doesn't work with new batteries

my magic mouse green led light won't turn on after putting in new batteries. I've changed the batteries a few times with no problems, but now it won't work. Can my mouse be defective/broken only after a few months??

I have exactly the same issue. Whenever I replace the batteries in my magic mouse I have a few days of constant disconnections. At first it's very annoying and the mouse disconnects every 3 minutes or so. It reconnects automatically in about 15 seconds but it's a huge pain. After a couple of days the connection seems to smooth out and become very stable. My guess is that it is something to do with the actual BlueTooth radio and that the signal strength might actually be too high at first. One note is that I have a magic mouse that I use with an iMac and that never seems to have the trouble, but the mouse that I've used with my laptops has always had this problem even with a couple of different laptops. It might be the mouse, but it also could be that when I'm using my laptops the mouse is only a few inches from the computer, but on the desktop the mouse is probably 2 feet from the computer.
Seems like it's a radio issue to me.

Hi guys! movie doesn't work -- stops in the middle...

i downloaded a movie that actually stopped at minute 32 --> movie frozen.. what can i do to get my money back? anyone had a similar experience? thank you!

Cost component structure 01 is not active
Diagnosis
You are costing with cost component structure 01. This cost component structure is not active.
System response
The costing results can be saved for analysis together with the log. The cost estimate receives the status costed with errors and cannotbe released.
Procedure
If you want to release the cost estimate, you must use an active cost component structure, or activate cost component structure 01.
How should i activate cost component structure 01?
OKTZ?

How can I choose the target image in Magic Move?

Hello,
I'm trying to use Magic Move to transition between slides. There are multiple shapes that are the same size and color on the target slide. Is there a way to control what the "target" shape is in Keynote?
Here's what I mean (please pardon my corniness):
Could I make it so that this image "shrinks" into the box on the far right ("Already")?
Right now, it's defaulting to the third box from the left each time.
Thank you so much for any help!

Hello HanktheCat,
Thank you for providing the details of what you are trying to do with Magic Move in Keynote. I found a couple of resources that I think might help.
To use Magic Move, you set a target location by moving the original object to a new location or changing the size on the following slide. I found an article with some tips on how to set this up:
The Magic Move transition uses graphics and text that appear both on the current slide and the following slide. During the transition, the objects are moved into their new position and size on the following slide. This transition only works when you use an identical image, shape, or text box in a different location or with a different size on the next slide. Magic Move doesn’t work with tables, charts, or movies.
For best results with a Magic Move transition, duplicate the slide and apply the Magic Move transition between the original and the duplicate.
To set up a Magic Move transition:
Create a slide and place the objects (text, shapes, images) where you want them.
Select the slide in the Slide Navigator and press Command-D to duplicate the slide.
On the copy of the slide, reposition and resize some or all of the text, shapes, and images on the slide.
Add any additional text or graphics you want to add to the copied slide, and delete any objects you don’t want on it.
Select the first slide of the pair and apply the Magic Move transition. For detailed instructions on how to add a transition between slides, see Adding Transitions Between Slides.
You can find the full article here:
Keynote '09: Tips for Creating a Magic Move Transition
http://support.apple.com/kb/PH6129
You can also watch a video of implementing Magic Move in this article:
Keynote '09: Animate Objects Between Slides with Magic Move
http://support.apple.com/kb/VI119
Thank you for using Apple Support Communities.
Best,
Sheila M.

Keynote: magic move: How do I make it add a 3rd slide?

Hi,
I made a 2 slide Magic Move transition that seemed to work ok, then I added a 3rd, checked all 3, used the Change button and assumed this would work. But it just won't accept that 3rd slide no matter what I do. Any suggestions?

Magic Move doesn’t work with tables, charts, or movies.
Select the second slide in the Slide Navigator and press Command-D to duplicate the slide
On the duplicate slide, reposition text, shapes, or images on the slide.
Select the second slide and apply the Magic Move

Magic Move Doesn't Work

Similar Messages

Maybe you are looking for