Magic Packet - How to get my router to send one

I have the Quantum Gateway 1100 router. I have a NAS Server on my home network. The NAS server has the capability to Wake on LAN if the router can send that packet. Can anyone tell me how to get the router to send the Wake-on-Lan packet to the server. FIOS Tech Support is completely and totally useless.

Hi,
You can do a fresh installation using the installer bits available at the following link/location Download CS5.5 products
For suites, you need to download and copy both .7z and .exe in the same folder. Clicking .exe will extract all relevant installer files. You can then install the suite. Use your existing Serial number when prompted.
regards
Aj

Similar Messages

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get all the values in one column of a JTable

How to get all the values in one column of a JTable as a Collection of String.
I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column.

I don;t want to write a for loop to say getValueAt(row, 1) eg for 2nd column. You could always write a custom TableModel that stores the data in the format you want it. It would probably be about 50 lines of code. Or you could write a loop in 3 lines of code. I'll let you decide which approach you want to take.

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

How to get a routing consistent to the Database

Hi ABAP,
my task is to program a RFC-function which can generate routings, copy routings, read routings, and modify routings (with Headdata, Operations, Materialtaskallocation).
I can use BAPI_ROUTING_CREATE to generate a routing, and to copy a routing.
Reading a routing is quite easy with normal selects.
Means i already have accomplished these tasks.
BUT now i have to modify the routing. The modification itself again is quite easy and doesnt make much problems. The Problem is: How to get the modified routing to the Database in a consistent state? Does anyone of you know of any BAPI´s/Functions/anything which can do that for me?
Or if not does at least anyone know how the data-model of a routing is?
If i had a data_model i could do the konsistency checks myself, but since i have no model i dont know what to check against.
anyway guys thanks for listening.

Hi Florian ,
SAP will track changes happend on some Objects.So u have to find out object class for ROUTING then u can get the data from CDHDR/CDPOS.
Regards
Prabhu

How to get majority of speed on one device

I have multiple devices on the e1200 router and i am trying to figure out how to get majority of the speed on one device.
And give all the other devices low speeds.
help?
Solved!
Go to Solution.

Hi Capo202, you can try to use the QoS settings of the router. Just access the setup page of the router and look for this page http://ui.linksys.com/files/E1200/2.0.00/qos.htm. Hope this can help you.

How to get a value from select one choice (created by static view)

Hi,
Whene ever Iam trying to get value from select one choice which is created by static view iam getting only index.How to get the actual value in 11g .please help me anybody .Thanx in advance....
Edited by: 874530 on Jul 22, 2011 11:05 PM

Thnax for your quick reply..
Iam using 11.1.1.3.0 version.
My code is
<af:selectOneChoice value="#{bindings.DenialLevel.inputValue}"
label="#{bindings.DenialLevel.label}"
required="#{bindings.DenialLevel.hints.mandatory}"
shortDesc="#{bindings.DenialLevel.hints.tooltip}"
id="soc2"
valuePassThru="true"
binding="#{backing_denialcomment.denialLevelList}">
<f:selectItems value="#{bindings.DenialLevel.items}" id="si6"/>
</af:selectOneChoice>
and in bean am not able to get value of attribute .Iam getting only index...

How to get a value for Select One Choice in the backing bean

Friends,
Does any one have any idea, how to get the value of a selected item value from the Select One Choice component in the backing bean iin valueChangeListener method. Right now I am always getting the sequence of the selected item, instead the actual selected value. I tried using 'ValuePassTrhough=true' also.. but didn't help
Below is the my code snippet
<af:selectOneChoice value="#{bindings.country.inputValue}"
required="#{bindings.country.hints.mandatory}"
shortDesc="#{bindings.country.hints.tooltip}"
id="soc1" autoSubmit="true" valuePassThru="true"
valueChangeListener="#{pageFlowScope.Bean.onValueChange
<f:selectItems value="#{bindings.country.items}" id="si2"/>
</af:selectOneChoice>
Thanks in advance.

check my other post at Re: Pass data from a variable to another page

How to get server certificate before sending off confidential content?

If my mail client knows for example the SHA1 value of TLS/SSL enabled receiving MTA's certificate, subversion of DNS and Root-CAs could be prevented if after establishing the connection, the com.sun.mail.smtp.SMTPTransport.serverSocket were accessible to retrieve that certificate:
X509Certificate[] certs = null;
if (serverSocket instanceof SSLSocket) {
SSLSocket ssl = (SSLSocket) serverSocket;
certs = ssl.getSession().getPeerCertificateChain();
byte[] sha1 = MessageDigest.getInstance("SHA1").digest(
certs[0].getEncoded());
//TODO now validate with the sha1 you already know
Unfortunately com.sun.mail.smtp.SMTPTransport (let alone javax.mail.Transport) have a public getServerSocket() or even better a getX509ServerCertificates() method.
Any other ideas how to get at those certificates short of using gnu classpathx?
See also http://forum.java.sun.com/thread.jspa?threadID=615422

I found the solution for server side. We will use Handler. And base on technology to generate web service's stuff (my server using axis, but my client using jaxWS), we have different ways to implement and deploy Handler. My purpose is only write input/output xml message to log, so with my server, I only adjust server-config.wsdd as bellow:
<deployment
xmlns="http://xml.apache.org/axis/wsdd/"
xmlns:java="http://xml.apache.org/axis/wsdd/providers/java">
<handler name="log" type="java:org.apache.axis.handlers.LogHandler"/>
<globalConfiguration>
<requestFlow>
<handler type="log"/>
</requestFlow>
<responseFlow>
<handler type="log"/>
</responseFlow>
</globalConfiguration>
<transport
name="http" pivot="java:org.apache.axis.transport.http.HTTPSender"/>
</deployment>
But now I still can not control directory and log file name yet (now it's axis.log by default).
Edited by: mydesktop on Nov 15, 2010 6:20 PM

How to get rendered JSF page (send it as HTML email)

Hello,
I would like to send notification email in my application. Could you please help me to find a way how to get HTML result of JSF page as string-file-stream. Simply anything I could handle and use it as email body or attachment.
My use case: User click to button (raise a action) which change something in DB and confirmation.xhtml(.jsf) is shown to him to confirm that this action was succesful. And I would like to send notification email to all other users with this page (simplified version).
I need a something like String getJsfPage(String url) but I could not find anything in JSF API.
Thanks for any clue.

quote gimbal2: +...now write the code to generate the email body...+
Thanks for reply...
Is that mean that I could not use already written code (confirmation.xhtml)? The beuty on JSF is that JSF parser take care about CSS styles, EL, templating (ui: ...), ... When anybody (administrators) wants to change how this email looks - just change this XHTML file.
How should I write email body? I thought about several way but nothing what looks good:
- I really dont want to use StringBuilder do build HTML.
- I dont want to write my own parser of .xhtml template (confirmation.xhtml).
- Write HTML (xml) template and parse it with XSLT transformation seems to me acceptable but complicated. Needs a special library to perform XSLT, complicated template service (future changes)
- JSP page, more-or-less the same problems like JSF page
The sad is that this email (html) body is quite small but highly dynamic (css, language of texts, logos...).

How to get video of more than one security camera in java

I want to get video from more than one security cameras and i really donot know yet how we do this that get videos continously with more than one camera
olz i a beginner help me

Hello.
I don't know if the topic still matters, but as I took advantage from the information in the preview posts, I decided to give my share.
I successfully ran three webcameras at the same time in a Linux machine with JMF.
The two main issues are:
1. It is necessary to run the binary "jmfregistry" ($JMFHOME/bin/jmfregistry) to detect the cameras every time a new one is added to the system. (Remember to run the binary with a user with write privileges on the registry file ($JMFHOME/lig/jmf.properties)).
2. It is mandatory to plug each camera in a different usb bus. In my case, the PC I was using had three accessible two-ports buses, two in the rear and one in the front of the box. If we try to use two cameras in the same bus, one of them won't work or the detecting procedure in the "jmfregistry" program will hang.
I hope it helps. Any question, please feel free to ask.
Andr� Braga
My configuration:
Java:
Java(TM) SE Runtime Environment (build 1.6.0_01-b06)
JMF-2.1.1e_linux_native
The machine:
OpenSuse Linux version 10.2 (kernel 2.6.18.2-34-default)
running in a Celeron D processor 2.66 GHz
Motherboard: Giga-byte GA-8IPE1000 Pro2 motherboard (865PE)
The result of the "lsusb" command:
Bus 004 Device 004: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
Bus 004 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 002 Device 023: ID 0c45:6007 Microdia
Bus 002 Device 001: ID 0000:0000
Bus 003 Device 004: ID 0ac8:301b Z-Star Microelectronics Corp. ZC0301 WebCam
Bus 003 Device 001: ID 0000:0000
In time (for linuxers): It was necessary to download and install the gspcav driver (http://mxhaard.free.fr/). It is also necessary do load this driver before the camera driver:
modprobe gspca
modprobe zc0301 (this one comes with the distribution)

How to get 2 columns data in One Column

Hi,
I have requirement like below
EName       Sal
Smith         1000
Scott          2000
Miller          3000
I want to display this two column like as follows
Emp
Smith
1000
Scott
2000
Miller
3000
Thanks & Regards,
Hari Babu

Hi,
That's called Unpivoting.
In Oracle 11.1 (and higher) you can use the SELECT ... UNPIVOT feature. For details and examples, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_10002.htm#sthref6810
In any version of Oracle, you can cross-join your table to any table or result set that has at least 2 rows, and use CASE (or DECODE) to get the results you want.
Remember that a column can only have 1 datatype: it's impossible to have a column that's a VARCHAR2 on some rows, but a NUMBER on other rows. You'll have to convert some data so that everything in the 1 output column has the same datatype. There's no way to express 'Smith' as a NUMBER, but you can convert all the NUMBERs to strings.
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements), and also post the results you want from that data (if not what you posted already).
Post your best attempt at a query. Point out where it is getting the wrong results, and explain, using specific examples, how you get those results from the given data in those places.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How to get icloud email to send email with windows live mail

What setting do i need to use get icloud email to send email through winndows live mail. I can receive email

The settings for iCloud's servers are listed here:
http://support.apple.com/kb/HT4864

How do I make my waveform send one point per iteration in a loop?

Hello,
I am trying to create a demonstration/lab for a future course at my university. I am trying to send data from a wind turbine to a third party DAC in order to run a motor. I have found out that when I send a wave form to the DAC I must send one point per iteration if I use the arbitrary signal generator. I would like to be able to send a file to the DAC without manually loading it as the arbitrary signal generator does. I was wondering how to send the data using one point per iteration using the build waveform or other waveform function that can have the waveform built from a file that is added on the front panel. I am using labview 8.0.
Thanks,
Laura
Message Edited by lhoising on 03-30-2007 01:21 PM
Message Edited by lhoising on 03-30-2007 01:25 PM

Maybe I am asking the wrong question. Maybe I should be asking why it is that when I send a waveform to the the DAC (using active x controls) the signal that is sent to the DAC is just the final value. I probed the wire connected to the data input of the DAOUTPUT node and it shows the entire waveform graph and not just the last value.
Thanks,
Laura

After getting the bom ,find routing,workcenter,how to get component routing

hi experts.
 the requirement is find the find the routing details of the given materials.
input is
material using select-options.
plant
out put
1.operator
2.material
3.material description
4.workcenter
5.vendor
6.operation description
7.uom
8.qty
9.uom
10.setuptime
11.processingtime
12.deliverytime
example.
 materials t4595959----this materials bom is give below
 3939393----
procurement type is f
 3393939 -
procurement type is e
 3939393------- procurement type is x
 i explanied what i tried.
 tables : marc,mapl,plpo,crhd,eord,eina,eine.
 1. using cs_com_expl_mat_v2 to get the bom explosion
 2. after got the materials with bom
 MARC MAPL MATNR MATNR
WERKS 1 WERKS
BESKZ =======> E OR x PLNTY
 PLNNR
 2 3
MAPL =====> PLPO =====> CRHD
 PLNTY OBJID
 PLNNR ARBPL
 VORNR
 ARBID
 LTXA1
 VGE01
 VGW01
 VGW02
 1 2 3
MARC ==> EORD => EINA => EINE
BESKZ == 'F' MATNR MATNR INFNR
 LIFNR LIFNR APLFZ
 FLIFN = 'X' INFNR
followed this method to explode the bom and got the operation.
but its only fetch the header materials operation ,not component operaion
h we get the opeations of the component
thanks in advance
Regards
ds

hI,
 Yes i checked the debugging mode ,its only fecthed the header materials
but not component materials,
i here give the query for ur review ,pl give me a solution
START-OF-SELECTION.
CLEAR ISTPO. REFRESH ISTPO.
LOOP AT ITAB.
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
 EXPORTING
 CAPID = 'PP01'
 MEHRS = 'X'
 MMAPS = ' '
 MDMPS = ' '
 BREMS = 'X'
 DISMM = ' '
 LIFNR = ' '
 WEBAZ = ' '
 DATUV = SY-DATUM
 MTNRV = ITAB-MATNR
 WERKS = P_WERKS
 EMENG = '1'
 STKKZ = ' '
 FBSTP = ' '
 FTREL = ' '
 IMPORTING
 TOPMAT = W_TOPMAT
 DSTST = DSTST
 TABLES
 STB = ISTPO
 MATCAT = MATCAT
 EXCEPTIONS
 ALT_NOT_FOUND = 1
 CALL_INVALID = 2
 MATERIAL_NOT_FOUND = 3
 MISSING_AUTHORIZATION = 4
 NO_BOM_FOUND = 5
 NO_PLANT_DATA = 6
 NO_SUITABLE_BOM_FOUND = 7
 OTHERS = 8.
WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
 W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
 SELECT MATNR WERKS OBJID BESKZ FROM MARC INTO CORRESPONDING FIELDS OF TABLE IT_ITAB_IDEL
WHERE MATNR = ITAB-MATNR AND BESKZ = 'X' OR BESKZ = 'E' OR BESKZ = 'F'.
SELECT MATNR WERKS PLNTY PLNNR LIFNR FROM MAPL INTO CORRESPONDING FIELDS OF TABLE IT_MAPL_IDEL
 WHERE MATNR = ITAB-MATNR AND
 WERKS = 'IN01' .
SELECT PLNTY PLNNR ZAEHL VORNR ARBID OBJTY LTXA1 VGE01 VGW01 VGW02 PLIFZ FROM PLPO INTO CORRESPONDING FIELDS OF TABLE IT_PLPO_IDEL
 FOR ALL ENTRIES IN IT_MAPL_IDEL
 WHERE PLNTY = IT_MAPL_IDEL-PLNTY AND
 PLNNR = IT_MAPL_IDEL-PLNNR AND
 WERKS = 'IN01' AND ARBID <> 0.
 SELECT OBJTY OBJID ARBPL FROM CRHD INTO CORRESPONDING FIELDS OF TABLE IT_CRHD_IDEL
 FOR ALL ENTRIES IN IT_PLPO_IDEL
 WHERE OBJID = IT_PLPO_IDEL-ARBID.
LOOP AT ISTPO.
IT_FINAL_IDEL-POSNR = ISTPO-POSNR.
IT_FINAL_IDEL-IDNRK = ISTPO-IDNRK.
IT_FINAL_IDEL-OJTXP = ISTPO-OJTXP.
IT_FINAL_IDEL-MENGE = ISTPO-MENGE.
IT_FINAL_IDEL-MEINS = ISTPO-MEINS.
LOOP AT IT_PLPO_IDEL.
 IT_FINAL_IDEL-VORNR = IT_PLPO_IDEL-VORNR.
 IT_FINAL_IDEL-ARBID = IT_PLPO_IDEL-ARBID.
 IT_FINAL_IDEL-OBJTY = IT_PLPO_IDEL-OBJTY.
 IT_FINAL_IDEL-LTXA1 = IT_PLPO_IDEL-LTXA1.
 IT_FINAL_IDEL-VGE01 = IT_PLPO_IDEL-VGE01.
 IT_FINAL_IDEL-VGW01 = IT_PLPO_IDEL-VGW01.
 IT_FINAL_IDEL-VGW02 = IT_PLPO_IDEL-VGW02.
 READ TABLE IT_CRHD_IDEL WITH KEY OBJID = IT_PLPO_IDEL-ARBID.
 IT_FINAL_IDEL-ARBPL = IT_CRHD_IDEL-ARBPL.
 APPEND IT_FINAL_IDEL.
 CLEAR : IT_FINAL_IDEL,IT_PLPO_IDEL,IT_CRHD_IDEL,ISTPO.
ENDLOOP.
 ENDLOOP.

Magic Packet - How to get my router to send one

Similar Messages

Maybe you are looking for