Magic Track Pad Issues?

Hi guys!
I've just installed my new Seagate, which is going like a cracker, and have reinstalled the peripherals (Apple Keyboard & Apple Track Pad) and they all work BUT the track pad has kinda lost the ability to scroll, zoom, etc, etc with two fingers, which I thought was sort of cool. Any tips for me?

Heya,
Just Click the Apple Menu - > System Preferences - > Trackpad,
and then you can check boxes to reenable these features
Regards,
John

Similar Messages

  • Magic Track pad issue

    I have been using the magic track pad for about a 9 months with no issues
    however over the last couple of months I've had this problem.
    Whenever I'm watching a online video and the quality is not good enough
    to go full screen I use the the 2 finger zoom gesture on the
    track pad to zoom in to were the video is of acceptable size and quality.
    However when I do this I can no longer control the video if I click on the
    video controls or progress bar nothing happens and I have to
    zoom back out to its original size before I can pause, rewind or fast
    forward, can anyone help resolve this cheers.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Magic Track Pad disconnecting after upgrading to Maverick

    My magic track pad has worked flawlessly since purchased with my iMac in 2011. After upgrading to Mavericks it now randomly disconnects and is scrolling in reverse. In order to get it working all I need do is turn on the mouse and when it connects, then the magic track pad reconnects. Why it will only reconnect after doing that, I have no idea ? The new reverse scrolling action is also a mystery. Help please ! 

    Hello Frank,
    It can be difficult to accomplish much if your Magic Trackpad does not stay connected.  I found an article with steps you can take when you have issues with a Bluetooth device not connecting.  I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    Bluetooth Quick Assist
    http://support.apple.com/kb/ht1153
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Magic Track Pad with Lion 10.7 and Safari zoom aA vs Pinch to zoom

    Hi,
    I enjoy a Mac Mini (early 2009) hooked to a 50 inch plasma and surf from my couch, stream etc... We browse with Safari 5.X and enjoyed the new Magic Track Pad with Snow Leopard. You could zoom / scale Safari with Snow Leopard beautifully, with a pinch out on the trackpad, same function as aA option on the browser task bar.
    Now with Lion, the pinch to zoom feature zooms but doesn't scale the safari window the same way aA option used to.  In lion a pinch out to zoom in will push a significant part of the browser screen off / out of view.
    The aA option on the safari task bar scales the window, and keeps everything visible but larger, but now in Lion it is not available from the Magic Track Pad Gestures. The Button is still there on the browser but there is no option to access it from the track pad with a gesture.
    How can I revert to the old way of zooming / Scaling a Safari web page with my Magic track pad in Lion?
    Thanks,
    H

    You can see in that screenshot that a lot of browser.gesture.pinch prefs have an empty string as their value and thus won't have any effect.
    You can restore some zoom feature by modifying the values of the related prefs on the <b>about:config</b> page via the right-click context menu.
    * browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
    * browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
    * browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
    * browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
    You may want to toggle this pref (I don't know what effect this has):
    * browser.gesture.pinch.latched -> <b>false</b>
    *pinchy: https://addons.mozilla.org/firefox/addon/pinchy/

  • Magic track pad freezes up after I wakeup my iMac

    After upgrade to Mavericks my Magic track pad for my Imac 27" Mid 2011 freezes up! I have to push and hole the button on the trackpad to disconect it! The screen dosen't show that it has been disconected! Then I press the button on the trackpad, and it is working again until the next time it happen again1 i have change out batteries , delete and restored it to bluetooh! The problem comes back! I even exchanged the trackpad with another magic track pad the problem come back to it!

    Hi Blackout5,
    Welcome to the Support Communities!
    The articles below may be able to help you with this.
    Click on the links to see more details and screenshots. 
    Portables and Magic Trackpad: Jumpy or erratic trackpad operation
    http://support.apple.com/kb/TS1449
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    OS X Mavericks: Reset your computer’s PRAM
    http://support.apple.com/kb/ph14222
    I hope this information helps ....
    Happy Holidays!
    - Judy

  • Magic Track Pad won't click

    I just got a Mac Mini.... connected by Magic Track Pad... all features work except "click"..... any ideas?

    I had the same problem.  I attached an old USB mouse to get through the initial setup.
    Under System Preferences --> Trackpad there are three lists of gestures and a check box by each to allow or disallow.  The single click on mine was not selected.
    One other gotcha.  Under the "Point and Click" tab there is the "Three Finger Drag".  Under "Other Gestures" there is "Mission Control" which should be swipe up with four fingers.  There is an option to make it swipe up with three fingers.  If you change it to three, it will disable the Three Finger Drag.
    I'm having trouble getting the four finger Mission Control gesture to work but otherwise the track pad works beautifully.

  • New Track Pad Issues After 10.6.4 Update

    I understand that the Mac OS X 10.6.4 was meant to address some track pad issues. I was not experiencing any track pad issue on my Late 2009 MacBook Pro prior to the update. However now my laptop is almost unusable!
    The pointer tracking remains accurate on all areas of the track pad, however most clicks are not recognized, requiring an average of 3-5 clicks to initiate an response. Also the bottom half of the track pad surface now seems less responsive to input than the top half. Multitouch gestures like selecting and dragging often lose track of my fingers before I've completed the action. Scrolling still seems to work fine.
    Again, I've had this MacBook Pro for 9 months now and prior to the 10.6.4 update the track pad was highly responsive and accurate regardless of how I placed my fingers. Please look into this matter immediately! Thank you.

    Exact same problem here. I hadn't notice what you write about the bottom half of the trackpad being less sensitive than the upper one, but now that you said it, I think the same thing it's going on with mine.
    I think my problems didn't appear right after I installed 10.6.4, or at least I didn't notice until 2 or 3 days ago. Maybe it worths the try to make a downgrade to 10.6 and check if the problem stop. Let's hope that someone came with the answer to this things, I really hate to use the 'tap to clic' function.

  • MBP running windows 7 in bootcamp.  Magic Track Pad doesn't work properly

    Hi,
    The trackpad on my MBP works great with my Win7 OS. I can use to fingers to click and scroll etc. For some reason when I use the Magic Track Pad it doesn't allow me to interact the same way. I've tried installing some 3rd party apps that are meant to make Windows work with the device on NON apple hardware but that hasn't helped. Anyone have any clues?
    Best,
    Jay

    When you connect it & open it WMP click on the SYNC tab of the program. Choose the files you want to sync to the computer then hit SYNC . The files should transfer to the computer. (check your settings as to where you want the files to go.)

  • Can't select at log in with magic track pad

    when I get to the log in screen I can move my curser but can't select nothing when I tap the magic track pad I end up hooking up a wired mouse to select user name to input it

    Untill you solve the problem, here's a workaround:
    If you type the first letter or two of the user you are trying to login as and then press return it will select that user at which point you can input the password.

  • How to pair Magic Track pad

    Hi every one , I just got Magic track pad -- MC380LL/A Model A1339 to use with Macbook pro 17" late 2011 , I tried to pair it with the Macbook pro , it keep
    looking for the magic pad without finding it , Can you please help to what to do .
          Thanks
          CTF

    You are quite welcome...amazing how many new batteries are actually not strong enough to handle the task.
    There is a solution I have found for my Magic Mouse at home after going through many sets of batteries: the Apple store has a battery charger/rechargable battery set that comes with 6 AA rechargable batteries ($30 US).  I just replace the batteries when they get low with a charged set and pop the low batteries in the charger for a few housrs.  Always have a set ready to go that way.

  • Non-Scrolling, Non-Zooming Magic Track Pad???

    Hi guys!
    Any ideas here? I love the Magic Track Pad when its working, but now I seem to have lost the ability to two-finger scroll and zoom. I've probably done something wrong setting-wise to get back to where I was.
    Help appreciated for a happy Mac user in sunny Western Australia!

    I thought the whole point of an iPad was touching the screen.......
    Submit your feedback directly to Apple using the appropriate link on the Feedback page:
    http://www.apple.com/feedback
    Best of luck.

  • I just upgraded to OSX Mavericks and when i use the gestures on my magic track pad it responds oddly.  Sometimes it won't recognize when my simple gesture of scrolling through a document.

    I just upgraded to OSX Mavericks and when i use the gestures on my magic track pad it responds oddly.  Sometimes it won't recognize when my simple gesture of scrolling through a document.

    Gestures is not working like it did before. The side to side, forward back swipe, is very picky. Sometimes it takes four or five tries before it works. And yes I know how to do it. I have had a magic trackpad for about one year. And was greatly pleased by how it worked, BEFORE Mavericks. It has has indeed changed.

  • Magic track pad preferences

    Hello,
    since this morning I am using the magic track pad and really love it.
    But when I open the preferences for the magic trackpad i almost immediately have a message that the preferences left unexpectedly, with the question to send a repport to Apple.
    What is happening.
    Freddy

    It could possibly be a corrupt plist file.
    Look in your hidden user library for
    ~/Library/Preferences/com.apple.driver.AppleBluetoothMultitouch.trackpad.plist
    Drag it to the desktop and logoff/logon.  The plist will be recreated.
    To reach your hidden library, start a finder window and on the menubar, Finder > Go > Hold the Option key down > select Library.
    Regards,
    Captfred

  • Magic Track Pad blues

    A problem with my magic track pad, bad enough that I regret buying it. Sometimes a mere brush will send the cursor across the screen, other times it turns everything blue, text and pictures, as the cursor is moved across the screen. This isn't selecting, as the blueness doesn't select for copying. But it stops the cursor doing most everything else. To get rid of it requires a firm left click, and only with the cursor over to the left of the screen.
    There's nothing in the help file or the System Prefs trackpad about this blueing.
    What causes the blueing, does it have any function? So far no function seems to be attached to the blueness, despite it looking just like selection.

    other times it turns everything blue, text and pictures, as the cursor is moved across the screen.
    Probably you're inadvertently touching the trackpad with three fingers; this comes from the "dragging" setting for three fingers in the Magic Trackpad setting.
    This isn't selecting, as the blueness doesn't select for copying.
    Actually it is, unless there's something wrong with your trackpad. If after selecting you press command-c, it will copy the selection to the clipboard.
    If this behavior is a problem for you, uncheck the box under "Three fingers" and it will stop (unless, again, there's something defective).
    Regards.

  • Magic track pad

    How do people like the magic track pad after using a mouse?  Is it hard to adjust?

    On a positive note ... mice do not "pinch and zoom" like a trackpad can.
    I love the trackpad in general on my MBP (unlike the worthless slabs of vinyl found on most PCs).  The fact that it does not move but I do means less desk space.
    But I have tried the external trackpad after learning my MBP trackpad that is placed right between my hands on the keybaoard.  What I found awkward is the constant moving of my "click" finger from the keyboard sideways to the trackpad so my "scoll" fingers can do the rest ... never did get adjusted to the thumb holding the the fingers scrolling at the same time.
    But that is just me and we are all individuals.  I suggest uo go to an Apple store and camp out for an hour, constantly trying anything that seem comfortable to you in the keyboard/trackpad manipulation.

Maybe you are looking for

  • Weird behavioiur of show_alert()

    Hello folks, I'm working on oracle 10g R2, i wrote a when_push_button trigger where there's a simple code as follow: declare reb number; begin :my_block.text_item1:='hello'; rep:=show_alert('alt_1'); end; the weird thing is that the alert window is a

  • Ecg baseline wandering[​need quick expert help]

    Hello everyone! I'm new user here, and I have an urgent problem considering my faculty project. I have looked at previous topics on this matter, and also I've checked the tutorial here http://zone.ni.com/devzone/cda/tut/p/id/6349  but I didnt find th

  • Customer Service... ? Refuse Escation Lie! Recorded conversations....

    I have just composed an email to Gary Acors who is out of office can you please advise of another contact for escalation purpose? Case Ref: WB-SE-00096087

  • In which language is ICM in NWCE7.1 written?

    Hi, I happen to find that ICM in NWCE7.1 seems not be a java program, so by what language is ICM written in? C language? Many thanks. Eric

  • How to get Material standard price: MBEW-STPRS?

    Hi BW experts, I am wondering what is the best way to extract data for <u>material standard price</u> in Material master data - Accounting view (<b>MBEW-STPRS</b>)? I checked existing extractors for material master, but I didin't find one which could