Magic Trackpad Power Off?

Just got a Magic Trackpad. Downloaded the software update and everything is working great. I even read the manual.
The manual says how to power on - it talks about turning the trackpad off when not using it, but it doesn't say how to power it off. I'm asking because I'd like to carry it around when traveling and I don't want the battery drained when it's in my bag.
Anyone know how to turn the power off, other than removing the batteries?
Message was edited by: Rudy

I just received trackpad, Followed directions to install, can move cursor can not get into it to program gestures. I have been talking to tier two support and engineering all afternoon. Their recommendation fresh install of operating system on other partition update to 10.4 then reinstall trackpad, still downloading updates. Not very happy it works but it doesn't , it sees it but can not be programed to do what they say it will, may have to go back to my wacoom tablet, it does even more but takes up more room on desk, it the trackpad is better than unmagic mouse.

Similar Messages

  • Do I have to power off a wireless keyboard and magic pad ?

    Hello,
    I am a new iMac user. I recently purchased it with a wireless keyboard and a magic pad. The question may be simple. When I shutdown the iMac, do I still have to power off the keyboard and magic pad ? Or do they power down as well ? From little research I made, it seems like they would power down themselves provided that there is no other Mac with Bluetooth enabled within range. Thoughts ?
    Thanks.

    The wireless mouse and keyboard that came with my Mid 2010 iMac are now paired with my MacBook Pro when it's on the desk, and the trackpad is on my wife's new iMac with 10.8. I don't turn them off unless I'm traveling with them. The trackpad and mouse can go over a year that way on a set of batteries.
    The keyboard on the other hand, behaves differently. Where the other two devices will show slow but consistent decay of battery power over time, the keyboard batteries will stay at 100% for quite a while, then drop suddently to 50%, stay there a while, then give up. I've learned to pack a few extra AA batteries in my travel kit as a result of the unpredicitable dropoff instead of short life.
    Still the battery life is pretty good for all three and I don't think it hurts anything to leave them on. I do, and the devices are quickly recognized when I open the computer.
    It's up to you and what makes you comfortable. Either way they work.

  • How do you turn Magic Trackpad off when shutting down?

    Hi folks--
    I just got a Magic Trackpad and I am learning to use it on a Mac Mini 2.0 Mid 2007, My question is; how does one turn it off, as I shut down my computer every night. I have seen that I could turn "off" Bluetooth before shutting down. I have tried the on/off switch on the Trackpad, but it seems to always stay On. Does it matter? I am concerned about battery life.

    On the right side of your track pad is the switch. When you press and release the switch it will turn on, to turn off, press and hold the button until the green light goes out then release.
    If you use rechargeable batteries you can just let the track pad go into sleep mode which is what I do. With Alkaline I would turn it off and make sure to take them out if you don't plan to use the track pad for an extended period. Alkaline batteries are prone to leaking once fully discharged.   

  • How to turn OFF trackpad on MacBook Air when using Magic Trackpad

    How to turn OFF trackpad on MacBook Air when using Magic Trackpad. Anyone have a clue on how to do this?

    Do you get more than one trackpad in system preferences? If not, which trackpad does it show in the "movie" in Preferences?

  • Button (or leg) came off back of my magic trackpad

    The semicircle leg came off the back of my Magic Trackpad. There are two of them so one is still on there. I have the piece but you can't exactly just jam it back in there. Anyone have a suggestion?
    Thanks!

    So, I had the same issue and I believe that I have found the solution (at least, it was the solution to my problem). I use a bluetooth keyboard and trackpad and noticed this issue when my trackpad got to about 40% life. As it turned out, when I plugged in a USB mouse and went to my bluetooth devices, I had two pointing devices listed. One was a bluetooth magic mouse that was just out of range. The other was my trackpad. The mouse was on a shelf and had something on top of it that was holding the button down. It was turned on somehow and had a battery level of about 90%. When I went and turned that unit off, my trackpad started working again without any issue. I turned it back on (where it was left) and I lost my trackpad. I then changed the batteries in my trackpad and it worked. I took out the changed batteries and put the original ones back in and, sure enough, it stopped working until I turned off the old magic mouse.
    So, it looks like if you use multiple pointing devices and have them in range, it defaults to the one with stronger signal. The reason why trackpad worked was that it had the stronger signal until the batteries started to die.

  • My MacBook Pro is apparently powered on, but no screen display and cannot power off.  Cap lock works so keyboard is working but trackpad not responding.

    MacBook Pro is powered on but no screen display.  Track pad not working and cannot power off.  Have tried wireless mouse and no response.

    Bring it to an Apple store or AASP. Power down by holding the power button down.

  • Turning off magic trackpad without waking computer?

    Is there a way to turn off the Magc Trackpad after putting the Mac to sleep. I don't want to change the sleep settings on the Mac and the Trackpad is the only input device. When I turn off the Trackpad it wakes the Mac. If I turn off the Trackpad first then I can't put the Mac to sleep.

    Hi Malcolm,
    Thanks for the answer. You sound a bit skeptical, but there are as many different situations as there are people.
    As someone who wanted a wired trackpad, shutting off the trackpad is important to me. In fact it's recommended by apple. Also, in our multi-purpose work space, it's very easy for the trackpad to wake the Mac.
    Thanks for the keyboard shortcut to put the computer to sleep. That solved our problem.

  • New mac mini - magic trackpad - won't do initial pairing (hence no anything

    So I just got a Mac Mini server, and I've only had laptops in the house up until now (so no USB keyboards or mice), so I got a Magic Trackpad and the wireless keyboard. Upon booting for the first time, I get the expected image to turn on the wireless mouse to pair, so I turn on the magic trackpad and... nothing. I turn it off, I turn it back on. I turn it on and hold the power button. I turn off the MacMini and restart and try again. I do a little dance to the Bluetooth spirits, and still nothing. Anyone have any ideas aside from go out and buy a wired mouse? (Note: I cannot go to preferences, as I cannot get past this initial waiting-for-bluetooth-mouse-screen.)

    Probably, it is because the Magic Trackpad requires at least 10.6.4 (and an additional update), or 10.6.5 (out of the box): so, if the install disc is only 10.6.3 or less, maybe it won't detect the trackpad.
    You could try first with a wireless (for example, the Magic Mouse works) or wired mouse, and install the trackpad afterwards, after having updated the OS to 10.6.5.

  • Magic Trackpad gone wild

    Has anyone seen a Magic Trackpad go wild?
    It seems to be OK all morning then last two days around now all of a sudden it just seems to scroll over and click on everything on my desktop so fast I cannot really see what is happening. Applications launching etc. like crazy. I do not think it is inteference. If I turn it off or take it way out in the garage the iMac settles down. It has been a bit be humid down here.
    When the trackpad goes wild I battery-up a standby magic mouse to do my work. After awhile I can power the magic trackpad back up or go out retrieve it from the garage and it seems ok.

    Again, If I understand the technology correctly these devices can be sensitive to humidity. I am 99% sure mine became very sensitive. They run on the electronic principle of capacitance. If you have ever been to Las Vegas, which is really dry, you will be shocked by the static electricity. The other side of the coin is humidity.
    Notice if you leave mosturizer on your hands or if they are not completely dry any of these devices can act weird. I could see how the they could go bad - or become more sensitive. Capacitors tend to be the weak link in lots of electronics.
    I took mine back to the Apple Store and the new one is just fine.  Humidity or not.

  • Magic Trackpad works with one iMac ..not another?

    I have both an earlier Intel iMac and a 27", i5 iMac .. the Magic trackpad is a wonder. I love it, but I have lost contact with my 27" ... there seems to be nothing I can do for it to make contact?!   I've done all sorts of fixes, but neither Bluetooth nor the trackpad window in the Sys. Prefs will see it.
    I have read references to people saying; "Make it a favorite."  I do not know what that means, nor how to do it.   I was just going to buy another Trackpad, but this works fine with my intel iMac.  As soon as I walk in the other room - I can use it. 
    I'd appreciate a little advice.  Thanks.
    Jim

    Jim,
    The trackpad can be paired with multiple machines but Connected to only one.  When it's connected the other machine will ignore it and even refuse to pair.
    If the macs are in seperate rooms at least 33 ft way you can do it by powering off the trackpad (this will disconnect from mac1), walk to the other room and power on. Mac2 should grab it.  If your too close it's possible Mac 1 will grab it again.
    Regards,
    Captfred

  • Magic Trackpad won't connect to new MacBook Air

    I'm running OS X Yosemite 10.10.1 on a new 13-in MacBook Air.  My Magic Trackpad shows up under the Bluetooth menu bar but won't connect when I click on connect. When I go to Bluetooth preferences, it doesn't appear in the list of devices and when I go to Trackpad preferences and try to set it up as a bluetooth device it also doesn't show up. I've tried turning the power off/on on the trackpad and making sure that it's discoverable. The indicator light flashes to show that's it discoverable but it just doesn't seem to be picked up by my MacBook Air. I've also tried loading fresh batteries in the trackpad but still nothing. Suggestions?

    Was the trackpad connected to something else? If so, it needs to be deleted from there first.
    Barry

  • Magic trackpad won't come on

    I leave my computer on & when I wake it up the magic trackpad won't turn on for about 10 to 15 minutes.  Batteries were changed & computer was turned off & on.  Any suggestions?

    Hello esmeralda724,
    Welcome to the Apple Support Communities! I understand that you are experiencing issues with your Magic Trackpad after waking your computer from sleep. Have you tried clicking the Trackpad in an attempt to wake it up? Check out the following resource for more information:
    Wireless input devices: Bluetooth frequently asked questions - Apple Support
    http://support.apple.com/en-us/HT3887
    9. After my computer starts up or wakes from sleep, when will the wireless devices become active?
    Wireless devices are usually available a few moments after the computer completes the startup process. After waking from sleep, Apple Magic Mouse and Apple Wireless Keyboard (2009) should be available right away. Other wireless devices can take up to 5 seconds to be recognized when waking from sleep. You may need to click a button on the wireless mouse once or twice to wake it up.
    Some Bluetooth devices—such as audio headsets—may disconnect to conserve the devices battery power after no audio or data is present for a certain amount of time. In such cases, you may need to push a button on the device or headset to make it active again. Check the documentation that came with your device for more information.
    Cheers,
    Matt M.

  • Magic trackpad question

    I posted this question in another section of this site and didnt get a response so I thought Id put it in another section and maybe Ill get a response this time.  Basically, my problem is after my computer goes to sleep and I click a key to wake it up my arrow is frozen and wont move, Ive checked the battery power in my trackpad and my keyboard and they both have plenty of battery power and it shows that my trackpad is connected onscreen yet my arrow still wont move.  I have to mess with turning my trackpad off and on and have to turn my computer off and on again as I have no way of clicking boxes because the arrow wont move.  This has just started happening in the past 2 or 3 days and I havent done anything out of the ordinary.  It finally comes around and starts working but I would like it to work instantly after I click a key to wake my computer up like it used to do for years before this started happening.  Could anyone help me with this and tell me why this may be happening and what I can do to fix it?  Any help would be GREATLY appreciated!

    Bluetooth and 802.11b/g (sometimes n) WiFi 2.4GHz frequences.  Also on some Macs the WiFi and Bluetooth antennas are either shared or very close to each other.
    So you can have interference from 2.4GHz WiFi.  You can also have interference from 2.4GHz cordless phones (yours or your close neighbors), 2.4GHz baby monitors (yours or your close neighbors), microwave ovens (which also use 2.4GHz frequencies).
    As an experiment, when they happens again, turn off your Mac's WiFi (WiFi menu -> Turn Wi-Fi Off.  See if your Magic Trackpad will connect.  Then turn WiFi back on.
    If you have the option of use 802.11n 5GHz only WiFi in your home, give that a try (I understand that many handheld devices often only have 2.4GHz WiFi support, so this might ONLY be an experiment).
    You could try the suggestions in the following article
    <http://www.computerworld.com/article/2475598/mac-os-x/os-x-mavericks--fixing-wir eless-keyboard-mouse-connections.html>
    You could try deleting
    /Library/Preferences/com.apple.Bluetooth.plist
    reboot your Mac
    Pair all your bluetooth devcies again.
    Wild idea, maybe AirDrop is causing problem (not my best idea, so do not assume it will be of any use).
    <http://www.tuaw.com/2014/11/25/heres-the-root-cause-and-a-workaround-for-ios-8-a nd-yosemite-wi>
    Skip the iOS beginning of the article and go to the Mac OS X portion.

  • HT4254 I cannot connect my magic trackpad to my macbook

    My macbook is not detecting the new magic trackpad.

    Which OS are you on?  The trackpad requires 10.6.4 or later.  If you are later versions of Snow Leopard or Lion, go to System Preferences > Trackpad > turn off the trackpad by holding the power button on the right side for 5 seconds, then tap the button once to turn on.  The green light should flash and be detected.

  • Magic Trackpad battery usage

    Hello Apple Discussions,
    I am a brand new Magic Trackapd user (since 13th of August 2010), but I already noticed something strange. My battery power dropped from 100% to 89% for less than 4 days of continuous usage. My trackpad has been delivered with Energizer Alkaline batteries. I hope that situation will be better with Energizer Lithium batteries, but most of all should like to see a firmware update that is fixing the issue as soon as possible.
    I also have Apple Wireless Keyboard (latest two battery release) which consumes less power. There are almost two months since I got the keyboard and battery dropped with only 1%. Hope to see the same with the Magic Trackpad as this tiny gadget is really working one of my favorite things having the Apple logo.
    Anyone of you noticed the same higher consummation of power with the Magic Trackpad or it is just me?

    chillvisio wrote:
    Hello Apple Discussions,
    I am a brand new Magic Trackapd user (since 13th of August 2010), but I already noticed something strange. My battery power dropped from 100% to 89% for less than 4 days of continuous usage. My trackpad has been delivered with Energizer Alkaline batteries.
    Here's my battery life story.
    Obviously, days between battery changes depend on use. I started with Alkaline batteries (Duracell) when I got the MT (Magic Trackpad) working. Battery life was about a month on the first set. I use the trackpad exclusively (of my three different devices- Magic Trackpad, Wacom tablet, Logitech S530 wireless mouse+keyboard) now, on my desktop MacPro.
    I am now trying the Sanyo brand Eneloop batteries to compare. I didn't even notice the battery warnings until the screen flashed a battery low indicator. I also have been using two Eneloop's in my Logitech keyboard, with I think, excellent results (about three months of constant use, and the charge indicator does gradually falls off in that time until blinking a warning).
    When I first inserted the rechargeable batteries their charge level said 83%. So I don't know if the life expectancy of the rechargeables will be close to that of alkaline (which said 98% when first started). Certainly it's more economical to use rechargeables. I use the mouse a lot. I see in this thread that results vary from a week or two to months.
    Questions:
    Does turning off the Trackpad make a big difference compared with leaving it set unused?
    Does a rechargeable give way lower life than an alkaline?
    What is the comparable battery life between the types of power sources- Alkaline, Eneloop, NIMH, Lithium?
    Is there an app for archiving battery life information on the MT? There is one for the laptop and there is history in Profiler, so it seems there could be a way to get the data. Has anyone done it?
    Is the low battery indicator (1.0V??) a false indication?
    Henry
    about the battery indicator...Message was edited by: HenryS

Maybe you are looking for

  • HttpURLConnection and cookies!!

    hello evrybody, i want to write a program which connect to a URL and load some data from there. but the problem is that site writes cookies you will only receive an hint to allow cookies. How can i write a program or simulate a client that accepts co

  • BOM Validity Using ECM

    Hello All, We are currently reviewing the ECM functionality to assistn in BOM validity maintenance.  I have made the necessary changes in SPRO to activate this functionality.  My initial testing utilizing the Change Master and associating it with the

  • Lightroom 6 doesn't migrate Export User Presets from LR5

    Tonight I upgraded from LR5 to LR6 (standalone, not CC).  My catalog migrated successfully and generally the library and develop modules seem to work fine.  But when I go to export, all my User Presets are gone.  Any advice on how I can recover my ex

  • Safari 5.0.1 crashing on me too

    It seems to start up ok (opens with Top Sites) but then dies in the middle of opening a page. Here is the Crash Report: Process: Safari [552] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.0.1 (5533.17.8)

  • Doing customer changes to cProjects 4.0

    Hi, In my projects a few developments are needed in regards to cProjects. However the developers are quite unfamiliar with how easy/difficult it is to make customer changes. It is stated that it should be easier in 4.0 compared to 3.1, but goes this