Magic Trackpad will "click" when not being Clicked.

Hey,
When I lightly lay my hand on the trackpad, in one area, it will randomley "click" even though I do not press down on the trackpad. I do not have the touch to click feature selected either, and am running all of the latest software for it in Lion.

Repair Disk Permissions in Disk Utility.
If that doesn't take care of it do a SMC reset and if that doesn't help do a PRAM reset.
_SMC RESET_
• Shut down the computer.
• Unplug the computer's power cord _and all peripherals_.
• Press and hold the power button for 5 seconds.
• Release the power button.
• Attach the computers power cable.
• Press the power button to turn on the computer.
_PRAM RESET_
• Shut down the computer.
• Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
• Turn on the computer.
• Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
• Hold the keys down until the computer restarts and you hear the startup sound for the second time.
• Release the keys.

Similar Messages

  • Magic Trackpad's One Finger "Tap to Click" Not Working in Login Window?

    Magic Trackpad's *One Finger* "Tap to Click" Not Working in Login Window:
    All of my iMac's accounts have *One Finger* "Tap to Click" turned on (checked) in System Preferences. However, in the Login Window where the user decides which account to login to, the Magic Trackpad's clicking ability does not work even though moving the arrow does work. How do I turn on the Magic Trackpad's ability to click in the Login Window?

    After accidentally pressing down on the Magic Trackpad, I realized the trackpad has tactile feedback, that is, it is a big button that can be pressed down and pop back up like old computer mice. Though this will allow the trackpad to select the account I want to open in the Login Window, it still doesn't explain why "tap to click" isn't working in the Login Window. Nevertheless, my question can be considered as answered.

  • IMac (Oct 2009) keeps shutting down and restarting when not being used.

    At least once a day, usually when not being used, I will see a dialog box that say computer had to restart due to a problem. data in problem report does not clearly state problem - many multi-page entries
    Have reinstalled OS 10.8.2 once
    this morning tried to restart with safe boot and had spinning beach ball for more than 15 minutes. shut down and restarted nin recovery mode. verified and repaired permissions (all seem to be related to Canon Pronter plug-ins- had an error message yesteday asking if I wanted to repair printer software and I said yes). Printer seems to be working. Had one statement that indicated a screensaver issue-see below
    a while back, iTunes album art screensaver hung up with just two album covers flipping in all rows and columns.
    after a few restarts, it started working correctly again..- yesterday I set screen saver to never, but still had a crash this morning

    Here's the latest panic report. BTW, I ran  for a while from an external system boot - very sloww (thumbdrive), but nothing happened. However, when I retarted I tried to restart in Safe Mode and the launch never completed (30 minutes without start)
    Tue Jan  1 07:15:40 2013
    panic(cpu 0 caller 0xffffff8002443908): "zalloc: \"buf.8192\" (878 elements) retry fail 3, kfree_nop_count: 0"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:1826
    Backtrace (CPU 0), Frame : Return Address
    0xffffff800aafb2b0 : 0xffffff800241d626
    0xffffff800aafb320 : 0xffffff8002443908
    0xffffff800aafb400 : 0xffffff80024de8d8
    0xffffff800aafb450 : 0xffffff80024de395
    0xffffff800aafb500 : 0xffffff80024dd64b
    0xffffff800aafb530 : 0xffffff80024dd7f7
    0xffffff800aafb550 : 0xffffff80026e7766
    0xffffff800aafb5c0 : 0xffffff800272024c
    0xffffff800aafb5e0 : 0xffffff8002721314
    0xffffff800aafb680 : 0xffffff800271d2a0
    0xffffff800aafb790 : 0xffffff800271959c
    0xffffff800aafb840 : 0xffffff800271936a
    0xffffff800aafb8c0 : 0xffffff80025137df
    0xffffff800aafb910 : 0xffffff8002509fe1
    0xffffff800aafb950 : 0xffffff800252685c
    0xffffff800aafba00 : 0xffffff8002526679
    0xffffff800aafba30 : 0xffffff8002712518
    0xffffff800aafbaa0 : 0xffffff8002511c46
    0xffffff800aafbae0 : 0xffffff800250936c
    0xffffff800aafbb90 : 0xffffff80024fbb49
    0xffffff800aafbc40 : 0xffffff80024fc314
    0xffffff800aafbf50 : 0xffffff80027e182a
    0xffffff800aafbfb0 : 0xffffff80024ced33
    BSD process name corresponding to current thread: mdworker
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel slide:     0x0000000002200000
    Kernel text base: 0xffffff8002400000
    System model name: iMac10,1 (Mac-F2268DC8)
    System uptime in nanoseconds: 39390380895329
    vm objects:17562048
    vm object hash entri:2264400
    VM map entries:6216720
    pv_list:19034112
    vm pages:74043792
    kalloc.32:1826816
    kalloc.64:170766336
    kalloc.128:649785344
    kalloc.256:648183808
    kalloc.512:2285568
    kalloc.1024:2637824
    kalloc.4096:2387968
    kalloc.8192:3989504
    ipc ports:2168672
    threads:1166880
    vnodes:16507128
    namecache:6952320
    HFS node:21840864
    HFS fork:6352896
    decmpfs_cnode:2244312
    buf.8192:7192576
    ubc_info zone:3559464
    vnode pager structur:1978800
    Kernel Stacks:1982464
    PageTables:44011520
    Kalloc.Large:12347186
    Backtrace suspected of leaking: (outstanding bytes: 236544)
    0xffffff80024435b9
    0xffffff80024245ed
    0xffffff80027ee1bd
    0xffffff80028507f7
    0xffffff800285075b
    0xffffff7f82b6b1ac
    0xffffff7f82b72922
    0xffffff7f82ab138b
    0xffffff7f82ab49b0
    0xffffff7f829f843c
    0xffffff800243dcde
          Kernel Extensions in backtrace:
             com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000->0xffffff7f82a1cfff
             com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000->0xffffff7f82ac3fff
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
                dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
             com.seagate.driver.PowSecDriverCore(5.2.2)[F1208D07-4D35-0191-3638-3D7CA8C9D5CF ]@0xffffff7f82b69000->0xffffff7f82ba1fff
                dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f82a4c000
                dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000
                dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
                dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
                dependency: com.apple.iokit.IOFireWireSBP2(4.2.0)[2B060BAD-9A9B-3A52-A742-A37CDFC59570]@0xf fffff7f82b4b000
    last loaded kext at 1223700924328: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f84440000, size 16384)
    last unloaded kext at 1481342745694: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f84440000, size 12288)
    loaded kexts:
    com.pogoplug.filesystems.ppfs          2010.10.7
    com.seagate.driver.PowSecLeafDriver_10_5          5.2.2
    com.seagate.driver.PowSecDriverCore          5.2.2
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AudioAUUC          1.60
    com.apple.driver.AppleHDA          2.3.1f2
    com.apple.driver.AppleBluetoothMultitouch          75.15
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleMikeyDriver          2.3.1f2
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.ApplePolicyControl          3.2.11
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.kext.AMDFramebuffer          8.0.0
    com.apple.ATIRadeonX2000          8.0.0
    com.apple.driver.AppleUSBCardReader          3.1.0
    com.apple.driver.AppleIRController          320.15
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.2
    com.apple.driver.AppleUSBHub          5.2.5
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.driver.AirPort.Atheros40          600.70.23
    com.apple.driver.AppleAHCIPort          2.4.1
    com.apple.nvenet          2.0.19
    com.apple.driver.AppleUSBEHCI          5.4.0
    com.apple.driver.AppleUSBOHCI          5.2.5
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.AppleBluetoothHIDKeyboard          165.5
    com.apple.driver.AppleHIDKeyboard          165.5
    com.apple.driver.DspFuncLib          2.3.1f2
    com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
    com.apple.driver.AppleMultitouchDriver          235.28
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.iokit.IOBluetoothFamily          4.0.9f33
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.AppleUSBAudio          2.9.0f6
    com.apple.iokit.IOAudioFamily          1.8.9fc10
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.driver.AppleHDAController          2.3.1f2
    com.apple.iokit.IOHDAFamily          2.3.1f2
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleGraphicsControl          3.2.11
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.iokit.IONDRVSupport          2.3.5
    com.apple.kext.AMD4600Controller          8.0.0
    com.apple.kext.AMDSupport          8.0.0
    com.apple.iokit.IOGraphicsFamily          2.3.5
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.iokit.IOUSBMassStorageClass          3.5.0
    com.apple.driver.AppleUSBMergeNub          5.2.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.iokit.IOFireWireSBP2          4.2.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOUSBUserClient          5.2.5
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IOAHCIFamily          2.2.1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOUSBFamily          5.4.0
    com.apple.driver.NVSMU          2.2.9
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7.2
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0

  • Magic Trackpad wont track/scroll/anything but click!!

    I just bought a magic trackpad to use with my iMac. I connected it fine, and it shows as 'connected' in the Bluetooth menu.
    It WILL click - but the cursor doesn't move, and it wont scroll or anything else. It's driving me up the wall!! I've tried everything I can think of and I can't find any information on this problem.
    Anyone have any ideas??

    Hello again, perhaps your issue is related to or the same as this :
    Magic Trackpad - Clicks work but no other gestures
    If that doesn't help, I'd be contacting Apple directly, and/or the retailer who supplied the trackpad. I hope you get it resolved quickly.

  • Is there a right click on magic trackpad?, Is there a right click on magic trackpad?

    Is there a right click on magic trackpad?

    System Prefrences / Trackpad / Point & Click /
    Message was edited by: b j t

  • Magic trackpad will not pair

    I have OS 10.8.3 with a magic trackpad. I removed USB overdrive and trashed my bluetooth preferences and still I can not get the trackpad to pari. Followed the instructions from this link. It had paired in the past but this morning I lost the device.  I removed it from the bluetooth list and tryed to re-connect.  Nothing appears to work. This trackpad works on my iMac, so it is a know good device. (I have since un-paired it fromt eh iMac)
    Any help would be great.

    I found I had the same problem... Was your trackpad hooked up to different computer in the past?  Mine was, after I removed it from my old computer, it worked fine....

  • Why does my event structure run a single click when I double-click?

    I would like to treat single-clicks differently than double-clicks but it appears that when I double-click an item on a Front Panel control it runs the single-click event once before running the double-click event.  I would like the single-click event not to trigger if the user double-clicks.
    I am discarding the "Mouse Down?" filter event then using the "Mouse Up" notify event to try to catch the difference between a single-click and double-click.
    Should I be doing something different with the timeout event (right now it does nothing)?
    Should I stop displaying the event type?
    Should I eliminate the 5 msec Wait in the Producer Loop?
    Should I use the "Mouse Down" notify event instead of the "Mouse Up" notify event?

    JeffOverton wrote:
    If you edit the event cases, is the "Lock front panel until the case for this event completes" box checked?
    I think this is a key configuration to understand.
    The current configuration means that the 'mouse up' event for the first click is triggered. Then immideatly the front panel is locked. The second click needs to wait until the event has finished. So I think unchecking that box might improve the code.
    Yes you should remove the 5 ms. wait, it has little purpose. It might even cause this: Click 1(& lock), wait 5 ms, event 1 (&unlock), click2 (no double click anymore).
    Ton
    Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
    Nederlandse LabVIEW user groep www.lvug.nl
    My LabVIEW Ideas
    LabVIEW, programming like it should be!

  • IPhone gets very hot when not being used!

    Been having some trouble with my iPhone recently. For some reason the iPhone gets hot - I don't mean warm... When it's in my pocket I can feel the heat being generated, or sometimes I'll pick it up from my desk and it'll be warmer than me, even when it's not being used.
    It's started doing this recently. I've already had to hard reset it due to other issues but in addition to the heat issue the battery goes down really quickly, again when it's not being used. Today from a full charge it was down to 50% in about 2 hours.
    I had suspicions it was due to a recently installed app, but I'm not sure.
    Any ideas? Does it sound like hardware or software to you? Is there an app I can use to see what app is being used the most (in terms of CPU/memory/battery usage)?

    Thanks both. I've restored the device and I'll see how that goes. In addition I've turned off Bluetooth since it doesn't work properly (the reason for doing the first reset). I'm finding if my headset goes out of range of the iPhone, it disconnects and never reconnects to the iPhone. If the headset is out of range for too long and I try reconnecting it via the BT menu option by selecting the headset, it tries to find it but fails. I end up having to completely re-pair the headset all over again.
    Any reason for this or is it a known issue with the bluetooth?

  • How to detect only single click and not double-click mouse events in Swing?

    Hi,
    In my application, I want to implement a functionality only for single click. But problem is on double click, first i can see a single click and then double click.
    i.e e.getCount() return 1 and then 2 for double click. I want to avoid this situation.
    Shouldn't it be just one event with a clickCount of 2? or any alternative solution?
    Please let me know how can i stop this.
    Thanks in advance..
    Cheers
    Somasekhar
    Edited by: SomasekharPatil on Mar 13, 2009 3:36 PM

    Maybe something like the below example:
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import java.awt.event.MouseAdapter;
    import java.awt.event.MouseEvent;
    import java.awt.event.MouseListener;
    import javax.swing.JFrame;
    import javax.swing.JLabel;
    import javax.swing.SwingUtilities;
    import javax.swing.Timer;
    public class SingleClickOnly {
        public static void main(String[] args) {
         SwingUtilities.invokeLater(new Runnable() {
             @Override
             public void run() {
              new SingleClickOnly().createGUI();
        public void createGUI() {
         JFrame frame = new JFrame();
         frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
         JLabel label = new JLabel("Only acts on a single click");
         label.addMouseListener(createListener());
         frame.add(label);
         frame.pack();
         frame.setLocationRelativeTo(null);
         frame.setVisible(true);
        public MouseListener createListener() {
         return new MouseAdapter() {
             private int clickCount = 0;
             private final Timer timer = new Timer(1000, new ActionListener() {
              @Override
              public void actionPerformed(ActionEvent e) {
                  if (clickCount == 1) {
                   System.out
                        .println("Executing action on click count 1 only");
              timer.setRepeats(false);
             @Override
             public void mouseClicked(MouseEvent event) {
              clickCount = event.getClickCount();
              System.out.println("Clicked: " + clickCount);
              if (clickCount == 1) {
                  if (timer.isRunning()) {
                   timer.stop();
                  timer.start();
    }Piet

  • Magic Trackpad will only work on clicking , finger swipe will not work at all.

    Please help the new guy out, just switched to Mac

    I have the same problem since update to 10.8.5.
    Just clicking works, nothin else

  • Trackpad clicking when not selected.

    Hello,
    I bought my macbook pro in august and have had no problems with it until recently. Sometimes my computer will just click for no reason. this is very frustrating! It doesn't matter what i'm doing...surfing the web, or writing a paper. Sometimes it will go on for 5 minutes, or just randomly do it. Is there anything i can do to fix this? It also seems that at times the mouse doesn't want to move.

    I have exactly the same problem. Anybody know the solution please?

  • My trackpad is freaking out, switching windows when its not suppose to, zooming in on webpages on its own, left clicking when i right click. whats wrong?

    It works fine after I restart, shut down, or put my mac to sleep. Shortly after I do that though it starts acting up, i tried the command option P R trick and that didnt work. I dont think its hardware because the trackpad works occasionaly. HELP!!!

    The Jiggle is due to virtualization and an attempt to fit the contents.  The only solution I can think of is to set the width based on the orientation.
    Jeff Sanders (MSFT)
    @jsandersrocks - Windows Store Developer Solutions
    @WSDevSol
    Getting Started With Windows Azure Mobile Services development?
    Click here
    Getting Started With Windows Phone or Store app development?
    Click here
    My Team Blog: Windows Store & Phone Developer Solutions
    My Blog: Http Client Protocol Issues (and other fun stuff I support)

  • Macbook Pro Will 'Tap to Click' but not 'Normally Click'

    Hello, my Macbook Pro is not allowing me to click at all now. I can only 'Tap to Click' but when i physically press down on the Touchpad, the Mac doesn't accept it.
    I don't know what i should do.
    Is my only option to take it to the Genius Bar?
    Thanks,
    --André

    Hi,
    I think I have the same issue (new mbpro 15'' jan 2009), the normal "physical" click behaves very strangely, sometimes works sporadically, then doesn't work anymore at all. I had to enable the "tap to click" in order to be able to click :/
    I can remember there was a firmware update at the very beginning for this glass trackpad because of those missing clicks and it seemed to be solved. But now, several months after, this seems to be worst than before: I sometimes enter this state with no physical click at all !
    André, could you please keep us informed about the feedback you get from Apple if any ? Thanks a lot (I keep on trying finding something about it on the web but unfortunatly I always get articles from Nov 2008 about the 1st missing click issue that leaded to the firmware update... :/)

  • Clicks when not busy, normal?

    Hello,
    A few weeks ago my first HD failed and apple replaced it with a new FUJITSU MHV2060AH drive. Now I noticed a click from it every one or two seconds, and I wonder if that is the way it should be. I don't think I heard it before...
    It seems that the clicks only happen when the drive is not busy, if I open photoshop for example, the clicks stop until photoshop finished starting up. Those are not series of clicks but one click every few seconds.
    Do you think that is normal?
    Thanks!

    Does Drive Journaling have anything to do with it? The first release of OS X 10.3 did not default to a Journaled format, and perhaps while it's in the shop the Apple Tech replaced the drive and enabled Journaling on it. Journaling maintains a log of all transaction activities to the drive, so the drive will be busier than usual. The advantage of Journaling is that if you have a power outage, you won't lose any data on the drive.
    I'm not sure this is the explanation, but to me it seems possible.
    Did you check the system logs, kernel logs, and Activity Monitor etc to see which tasks (if at all) might be causing the clicks?

  • My magic trackpad will not work (at all) in Parallels (W7)

    The trackpad works beautifully on my Intel iMac (Lion) 10.7.2, but will not work at all under Windows 7 on Parallels. All latest updates of everything to my knowledge.
    I find no notes on this either on the Parallels site or here. Am i the only one in the universe having this problem. To be clear, there is no response from the pad whatever - nada, bupkis.
    Maybe I have to pair it manually with Windows? That seems odd since everything else works fine that is connected to the iMac.
    Tips, hunches, soothing words?
    Thanks!

    If you downloaded and installed the Windows support software in accordance with the instructions, you now have a diamond shaped icon in the Windows task bar. Clicking this icon opens the Bootcamp control panel where all your trackpad settings can be configured.

Maybe you are looking for

  • Uploading a PDF "within" my Captivate project

    Hi, I would like for learners to have the option of clicking an attachments link within my Captivate project so that they can download a file that is relevant to my course WHILE they are watching the video.  Can Captivate do this?  I've used a simila

  • How to store sql statement in oracle table?

    I tried it in this way: SQL> insert into sql_text values('select invoice,invoice_dt,DT_INVOICED from PS_BI_HDR where DT_INVOICED= '21 JAN-2010' and BILL_STATUS='INV''); insert into sql_text values('select invoice,invoice_dt,DT_INVOICED from PS_BI_HDR

  • Converting SQL server database into SAP readable XML??

    Could anyone kindly let me know what is the procedure to convert SQL server database into SAP readable (encrypted) XML for SAP Authoring tool???

  • IIS Recycle times for Service Application App pool / Reporting Services 2012 memory

    Hello, On our SharePoint application servers we run the Reporting Services 2012 in SharePoint integrated mode. For the Reporting Services SharePoint sets up a own App Pool. Now we found, that this App Pool for Reporting Services takes all the memory

  • Error while building squid

    Trying to build squid whith squid_ldap and squid_kerb_auth. Here my PKGBUILD: pkgname=squid pkgver=2.7.STABLE9 pkgrel=1 pkgdesc="A full-featured Web proxy cache server." arch=(i686 x86_64) url="http://www.squid-cache.org" depends=('openssl' 'pam' 'cr