Magic vertical scrolling errors with Windows 7 64 bit

I have read many of the forum responses but still unable to resolve. I run Win 7 Pro 64 bit on my MacBook Pro. When using the Magic Mouse 2 consistent issues that I cannot find a fix for:
When using a drop down list in Chrome (Favorites), particularly a multi-level one that opens a side list, as I move mouse onto item I want to select the drop down closes before I can select the item.
When selecting an item from a drop down list in a form and then moving mouse to the next field as I move mouse the original selection often changes (i.e. when i move off the selected field, even though an item has been selected) the Magic Mouse thinks I am still in drop down mode and selected the next item up or down in what would have been the drop down list.
Has anyone found a fix for these (likely related) issues? As I work online all day this causes not just frustration but also errors where sometimnes I am not even aware that the incorrect drop down item has been selected.
Thanks all.

That looks relatively safe but quite impractical in the long run.
I'm looking to achieve something similar, getting the middle click button to work, since it would be very useful through general productivity in terms of web browsing as well as for gaming such as Minecraft (building).
Anyone got any ideas as to how to achieve this? I know it's not possible to get this functionality in OS X without some third-party tool such as MagicPrefs, but surely it should be possible in Windows.
Thanks.

Similar Messages

Ipad4 connection MTP USB device error with Windows 7 64 bit

I have recently bought iPad 4. When I connected to my computer through USB running Windows 7 Professional 64 bit i got the following error message
"MTP USB Device failed to install"
Please guige me

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

Cant download itunes, because ' there is an error with windows installer package' please help?

cant download itunes, because ' there is an error with windows installer package' please help?

I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1

Hello I have problems with my HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1 surround sound receiver conete SPDIF after update from vista 64 bit to windows 7 began this problem
only nomal audio but no support from the surround sound of 5.1 channel SPDIF what the error may attend
I hope you can help me
Sincerely,
Steve

maybe your spdif default properties, in the supported format tab, options there are configured too high for your revceiver???
is there an error code on your receiver? if there is an error code check the troubleshooting section in the manual your receiver came with.
you could also try in windows media center, go to the tasks->settings and click windows media center setup->setup your speakers for 5.1 and hit the test button..
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Why is there a vertical scroll bar with short page export from FW CS4?

When I view my exported page that is 400 pixels tall, I see a vertical scroll bar on the right of my IE7 browser even though the page is no where near the bottom of the browser. How do I eliminate that scroll bar?

Unfortunately this is not working in IE7. Below is my body tag (I edited the SLICES.XTT to prevent the margins) where I've added the overflow option:
body </style>
But I still see the vertical scroll bar with a 400 px image exported as html, see attachments.

Adobe PDF Printer not working as print driver; 9.5.5 (pro) with Windows 7, 64 bit

I have installed, repaired, uninstalled and re-installed Acrobat Pro 9.5.5 on a newly formatted SSD with Windows 7, 64 bit on my desktop machine. The program was installed from Acrobat Pro 9.0.0 and updated within the program. I have the program also installed on my laptop, and the Adobe PDF Printer driver is working properly on my laptop.
On my desktop with the newly formatted SSD, the Adobe PDF printer driver is not working. Note that I am using the printer driver, and not any pdf creation techniques within MS Office or other programs.
When I go to the Adobe PDF printing preferences on my desktop, I only get a generic, two tab window open. When I print a file to this printer on my desktop machine, I do not get a window opening that asks where to create the pdf or what to name it, and I never see any files created. In MS Word, the Create PDF option under the Acrobat tab works and opens a dialog to ask the name and location to save, and then opens a PDF Maker progress window and properly creates the file. I can also save a file as an .eps or .ps file and use Distiller to create the pdf. However I cannot get the Adobe PDF printer driver in my Devices and Printers to work properly, although it works just fine on my laptop with the same program (Pro 9.5.5) and same Windows version (7, 64 bit).
Repairing, uninstalling and re-installing does not solve the problem. Acrotray.exe *32 process is running. Any ideas on why this won't run properly on my desktop, but will run on a similarly configured laptop?
On my laptop, I get a full, (7) tabl menu with all the normal options:

I found this answer from Deepak Chauhan on another forum, and it solved this problem!
Try this to add Adobe PDF printer manually on Windows 7, and Windows Vista.
If windows 7 is Enterprise or better edition: (Admin rights required)
Start>search for printmanagement.msc and open the print management module
Expand the print server and expand the computer name to see availbale printers, drivers and printer ports.
- from printers ensure there's no Adobe PDF printer, if there is delete it
- go to ports and delete the PDF ports (the ones ending in *.pdf)
- go to drivers and delete the PDF converter.
Take note if any errors occur, but continue with the following steps regardless.
If on windows 7 home edition, just goto start>Devices and Printers and ensure PDF pritner is not listed.
Then open the registry (if any erors deleting these keys happen, see below)
1: go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Printers
delete any adobe PDF printer subkey present
2: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
delee the PDF port monitor if present
3: go to: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
again delete and pdf printer subkey
If any erros occur, you need to set the owner of the key to the currently logged in admin user, then ensure that user has full control.
Do this by right-click the key and selecting permissions, clicking on advanced, then the owner tab.
Once you've all that has been done, open a command line as administrator.
Copy and pate the following commands in order
1: net stop spooler
2: rundll32.exe setupapi.dll,InstallHinfSection AdobePDFPortMonitor 128 C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf
3: net start spooler
4:rundll32.exe printui.dll,PrintUIEntry /if /b "Adobe PDF" /f "C:\Program Files (x86)\Adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF\AdobePDF.inf" /r "Documents\*.pdf" /m "Adobe PDF Converter"
That should set back the pdf printer.
This seemed to provide the link that provided the Adobe PDF Settings tab to the Adobe PDF Printing Preferences that was missing!

Networked HP 1022 text errors on Windows 7 (32-bit)

We have a networked HP Laserjet 1022n that works OK with older PCs, but NOT OK with Windows 7 (32-bit).
1. Text characters are always gibberish from the Win7 PC. Upgrading from MS Office 2010 to 2013 did not fix problem. Web browsers (usually Firefox, Chrome) also print garbage text; either whole page is bad or just bad header/footer text.
2. Printer network connection often hangs up after attempting a print from the Win7 PC, but not from other PCs (WinXP; MS Office 2003, 2007).
3. Text documents print OK from MS Notepad.
4. Images normally print OK alone or in documents, but also hang up printer connection sometimes.
HP Print and Scan Doctor tool detected an "Unknown Error (06)" but could not identify or fix it. Microsoft FixIt scan tool says everything is OK, unless the network connnection is hung up (after attempting to print). Test prints are OK, both from PC software and from printer buttons.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial inkjet board here:
http://h30499.www3.hp.com/t5/Printers-Deskjet/bd-p/bsc-415#.UBwGlGsiR64
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I am dual booting my mackbook pro with windows 7 64 bit. Yesterday it started locking up at the disk drive selections screen, when you hold down the "option" butting when powering on. I have been searching all morning, and so far nothing. Thanks. :)

Hey folks,
I have been using bootcamp for months now with windows 7 64 bit, and its been fine, yesterday while I was rebooting to do some gaming, at the hard drive selection screen when you boot holding the "options" butting down, it locks up when I select the windows drive and just sits there for ever. It doesn't throw an error, it boots fine into Lion.
I searched all morning and didn't find anything, was hoping that someone might have an idea.
Thanks in advance

Search again. Microsoft has tips on what to do and Windows has a number of features
system restore points
automatic system repair using the Win7 DVD
system restore image creation
Just like you would with OS X Lion and Lion Recovery and Repair
Use WinClone 3 www.twocanoes.com $20 to make an image just like you would with Disk Utility Restore or Carbon Copy Cloner
rollback to last known good boot check point
rollback a driver or program or any changes
clean out temp files
clean registry
chkdsk
https://discussions.apple.com/people/The%20hatter?view=bookmarks

Labview 2012 Installer builder issues with Windows 7 64 bit

I have a clients project application program I am working on and am having a lot of trouble getting installed applications to work on Windows 7 properly. The Labview Installer sets the default installation directory to "c:\Program Files\" on Windows Xp and on Windows 7 64bit this defaults to "C:\Program Files (x86). When I install the application on Windows 7 and run it, because Windows 7 64 bit unreasonably protects this directory and every folder under it, if you try to write file to any subdirectory under it (like a reports directory), windows 7 will not let the file write to the directory and the file(s) disappear and you get permission errors. This has been difficult to address. Even logging in as administrator, I have difficulty changing the folder permissions. In addition, when I am in the file write process, if the default directory is coded to come up in the file Open/Save dialog, will not properly
go to and display these protected directories. So thinking that OK, I'll just chage the install directory to something direct to the C: drive and not the Program Files (x86) directory, so I have better control of the folder permissions. Now the Installer build gives errors. It built, but the install fails. Looks like National did not test this for Windows 7 very well. I have run into just about every issue possible with Windows 7 and Labview. Clearly Labview was not very well tested with Windows 7 6 bit. I do not have the Internet toolkit added to the application, only the VISA 5.2 driver. Anyone else having application issues with Labview and Windows 7 and have ideas how to work around this??
Attachments:
BuildErrors.txt ‏11 KB

It's no NI's fault and has nothing to do with 64 Bit either. It is something MS changed starting with Vista, namely tightening security of the whole system to a similar level as was usual on more professional OSes like Unix 20 years earlier. A user has not rights anymore to write into the location where applications are installed. This is for one reason to protect installed applications from being modified by malicious code.
Instead every application should write its runtime data in one of the user writable loacations such as the user's Documents directory for data files, or in the user's or the machine's configuration directory for configuration settings. For single installations you could always set the directory which your application got installed into to be user writable by changing the rights of that directory afterwards but for applications that get installed on normal user computers this is a VERY hacky and discouraged move. Same about installing your application into the root of your system drive. I think it was an oversight by MS to not protect that directory too from user modifications, but was most likely unavoidable to allow DOS application installations to still work.
LabVIEW has functions to retrieve a whole bunch of those preconfigured and user writeable locations and you really should change your application to make use of those locations, instead of trying to write into the installation directory or installing the application into the root location of the system drive, if you want to be compatible with Windows Vista/7/8.
Windows 7 also requires for a number of actions such as installing programs or drivers so called elevated rights. This means that even if you are logged in as administrator you have to explicitedly provide the admin password again to be able to perform the action. This can be done by starting the program as administrator, when this is available in the right click pop-up menu, and is also sometimes done automatically for applications that Windows determines to need those rights such as setup programs for installations.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit, the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

Adobe Prof 7 problems with Windows 7 - 64 bit

My laptop crashed and I just purchased a new comptuer with Windows 7 - 64 bit. Now have 2 problems with Adobe:
#1 When I right click on a web site to save as PDF, it won't work. There is no error, no response. Just doesn't do anything
#2 If I go to a web site requireing Adobe Flash Player Installer and I click to install it... nothing happens.
Please help!
Thanks Mary

Adobe Acrobat 7 surely isn't supported in Windows 7. Heck the newest version probably isn't either (I haven't checked).
That being said, right-clicking to save a file doesn't involve Acrobat and neither does installing Flash Player.

I need help with my MSI Dragon edition 2 with windows 7 64 bit home edition

I recently got my laptop from Xotic PC with windows 7 64 bit home version which was free. The only problems I have for the laptop is that I can't detected the Nvidia Geoforce GTX 780m graphics card on my system or update it, games on steam tend to lag like Metro the last night which came free for me but even at low settings the lag was really bad. Sometimes the screen starts flickering becasue of a display driver error after playing a game or closing a game. So if anyone can help me with these issues I would really appreciate helping me fix these errors.

Please click link below to download driver.
http://www.msi.com/service/download/nbdriver-19693.html
or you can use GeForce Experience, keep drivers up to date.
http://www.geforce.com/geforce-experience

DELL VOSTRO 3750 with Windows 7 64 bit BOSD

Hello:
I have been dealing with BSOD for the last 8 months, but my hardware appears fine. I thought the problem was related to some wrong DELL drivers for my DELL VOSTRO 3750 with Windows 7 64 bit. Tried for a few months to solve the problem with DELL
customer service. My warranty ran out May 31, 2014. I had DELL come and replace the network card and the fan because I was having overheating issues and some of the indications from the bluescreen messages seemed to point at the network card. A
month after warranty ran out, I was still getting BSOD so I tried uninstalling and reinstalling original drivers from DELL. Worked fine for a couple of months. Then the BSODs came back again everyday or 2.
Is there anyone in the Microsoft world that can help?
https://www.dropbox.com/s/0ze9z2yduzdnh5u/MEMORY.DMP?dl=0
Really appreciated,
Tim

Hi,
I checked the link again and it still stay unavailable.
Please recheck and upload the files again.
For resolving Blue Screen Errors in Widnows 7, please first take a look at the following article:
Resolving stop (blue screen) errors in Windows 7
Best regards
Michael Shao
TechNet Community Support

Is CS5 Web Premium compatible with Windows 7 64 bit?

I just placed an order for CS5 Web Premium. I just assumed that if a software states compatible with windows, that is sufficient. I bought a license for Quikbooks books Accounting Software and just read in the very fine print not compatible with 64 bit OS! I am worried if CS5 is also not compatible. Please some one reply before I decide to pay in full for the product in two days time!
Is CS5 Web Premium compatible with Windows 7 64 bit?
Thank you very much!

Hello Bob,
I tried to install quickbooks 2009/10 accounting on my pc and an error message 1603 appear something to do with microsoft net. framework. I am awaiting reply from the quickbooks support team.
To my horror checking forums on this issue, I am not the only one with complaints about Quickbooks 2009/10 incompatibility with Win 7 64 bit and apparently poor customer support. I sincerely hope this is not true. I am worried my first investment as a small business owner is already a waste of cash. : (

Magic vertical scrolling errors with Windows 7 64 bit

Similar Messages

Maybe you are looking for