MagSafe LED Green, but Battery Not Charging to 100%

I got my MBP 15" (the "low"-end version) about 3-4 weeks ago. About a week ago, I noticed that when working on my computer with the AC adapter plugged in, it charged up to 98% (according to both CoconutBattery and the Mac itself) and then stopped; the day after, it only charged up to 96%. That same day, I had the entire MBP replaced because of an issue with a faulty latch, and though I mentioned the battery % issue at the Geek Bar, I was told it isn't a big deal and should be taken care of by virtue of the replacement MBP. However, 2 days after, I notice that once again, my battery charges to only 98% and then stops; again, the MagSafe LED is still green as if it were fully charged.
Is this a problem/will it keep degrading? Or is it just normal? Is there any way to fix this?
Thanks,
~Ethan

Hi EthanRT: This is perfectly normal, battery behaviour. There is an explanation in this Apple article: http://support.apple.com/kb/TS1909?locale=en_CA
Enjoy
Stedman

Similar Messages

  • My power cord lights up green, but is not charging my macbook pro. Any idea what I should do?

    I have a MacBook Pro, about 2 years old.  When I plug in the power cord, it glowa green but is not charging the computer.  Any ideas?

    Reset the SMC:
    http://support.apple.com/kb/HT3964
    If that doesn't get it charging again, see this article:
    http://support.apple.com/kb/TS1713
    If you have access to another AC adapter, see whether that one works better.

  • TS1367 My charger connects with my macbook with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery.

    My charger connects with my computer with a very faint green light (not the normal orange light) and can maintain the computer turned on but does not charge the battery. The power source to keep it on is the power adapter and that it's "Not charging" on the battery settings. And my charger seems to charge other computers fine.
    The part of my mac where the adapter (L-shaped, magnetic) attaches is a bit damaged - a small piece of the white case/body around the part where the adapter attaches is broken off, but that's just an outer damage.
    I don't know what's wrong with my computer, and if anyone has had a similar experience or knows what's going on, it'd be tremendously helpful!
    Thank you!!

    Hi Christopher,
    Doubtful an upgrade would fix a hardware issue. If you are thinking of upgarding to Lion, best to do all necessary maintenance first.
    Try Resetting the System Management Controller (SMC)
    If that doesn't help try here >  Apple Portables: Troubleshooting MagSafe adapters

  • Battery charges when asleep but will NOT charge while awake

    Hello -
    By battery will charge when off/asleep but will not charge while awake. It just slowly drains to nothing and dies even though adapter is plugged in. magsafe adapter light is green when open/on and orange when off/asleep and lights on battery indicate charging while in the latter state. still using stock battery that came with computer when I got it a few years ago, so it's not new by any means, but when fully charged lasts as long as it used to. I would think maybe charger is issue, but it DOES charge, just not while awake. not sure why computer wouldn't still work correctly while plugged in if in battery indicator it says power source is "power adapter," but its not. I have tried resetting PMU and calibrating battery. the combo of the two seemed to work when having issue a few months ago, but it just started doing it again. frustrating because once it dies I have to wait several hours until its fully charged again, so it cramps the workflow... any ideas? battery info from profiler below.
    Cheers,
    Ian
    Battery Information:
    Model Information:
    Serial Number: DP-ASMB013-3556-2063
    Manufacturer: DP
    Device name: ASMB013
    Pack Lot Code: 0001
    PCB Lot Code: 0000
    Firmware Version: 0102
    Hardware Revision: 0300
    Cell Revision: 0100
    Charge Information:
    Charge remaining (mAh): 81
    Fully charged: No
    Charging: No
    Full charge capacity (mAh): 4571
    Health Information:
    Cycle count: 827
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): -1134
    Voltage (mV): 10921
    System Power Settings:
    AC Power:
    System Sleep Timer (Minutes): 60
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 20
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Hardware Configuration:
    UPS Installed: No
    AC Charger Information:
    Connected: Yes
    Charging: No

    Scott - Your answer ultimately led me to the answer, albeit months later, after much internal deliberation and some trial and error... thanks!
    Ruled out battery (as crazy as that sounds - it's had a bajillion cycles) as it didn't make sense that battery would charge but wouldn't work while awake. I have a friend whose battery is completely shot and his still works as long as magsafe is plugged in, and mine wouldn't even do that. tried another adapter and that worked. then tried mine in a different plug. so in the end, turns out I had a bum powerstrip... mag safe / battery recharge works properly when just plugged in somewhere different.
    So no need to buy a new charger or battery (yet!)
    thanks to all,
    Ian

  • TS3499 macbook recognises but will not charge new battery

    I was advised to buy a new charger last week and have just been advised by an apple employee to buy a new battery for my MacBook 2009 and i am having the same issue as my old battery.
    The Mac reconognises the battery but will not charge or run off the battery.
    Just spent £150 in total on new charger and battery but still having the same problem as before.
    I have downloaded the firmware update but my Mac is already running the latest software.
    Regards
    Jack

    Have you reset the SMC and pram?
    MacBook and MacBook Pro 
    Laptops with a battery you can remove 
    Shut down the computer.
    Disconnect the MagSafe power adapter from the computer, if it's connected.
    Remove the battery.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Reconnect the battery and MagSafe power adapter.
    Press the power button to turn on the computer.
    Newer Mac portables with a battery you don't remove
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer.  
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • My MacBook is plugged in with a green light and shows it's plugged in, but is not charging.  When it's unplugged, it dies.  It was charging last time I used it but not any more.  I am no computer whiz and need detailed info on what to do  Thanks.

    My MacBook is plugged in with a green light and shows it's plugged in, but is not charging.  When it's unplugged, it dies.  It was charging last time I used it but not any more.  I am no computer whiz and need detailed info on what to do  Thanks.

    The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
    Removing the battery:
    Shut down the computer. Disconnect any cords connected to the computer.
    Turn the computer over.
    Locate the battery latch on one side of the battery.
    Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
    Lift the battery out.
    Installing the battery:
    Place the right side of the battery into the battery compartment at an angle, as shown below.
    Gently press the left side of the battery down until it sits flat.
    While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
    Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

  • Satellite L300 - Battery not charging but power is reaching to motherboard

    Hi
    I have dropped the laptop and after that battery is not getting charged. Laptop is working fine with battery only. I have opened the laptop to find if there is any thing got dislodged. But everything was fine. I have checked the power is reaching till motherboard. But its not charging the battery.
    For information I have opened only keyboard and bottom panel to reach the power supply cord. I can see the motherboard top section where I have checked the power supply is reaching.
    Can any body help?
    Thanks.
    abir

    >Can any body help?
    I think the hardware needs to be scanned for possible issues.
    I can only speculate about faulty parts
    It could be the power plug problem or something is broken on the motherboard but its mostly impossible to say whats wrong here
    So get in contact with an local Toshiba authorized service guys to check this.

  • I run  hard hardware test on my macbook white an found error like this 4SNS/1/40000001:VPOR-0.578 and i replace my new battery but it not charging,help me!!

    i run  hard hardware test on my macbook white an found error like this 4SNS/1/40000001:VPOR-0.578 and i replace my new battery but it not charging,help me!!

    Bring it in for service.  Anytime hardware test detects an error, that's an indication the service department needs to fix it.

  • Blackberry z10 battery not charging by phone or battery fully charged but phone show battery low

    blackerry z 10 battery not charging by phone or battery fully charged but phone show battery  low 

    when you connect your Z10 to your PC via the USB cable, does it show as connected?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT2037 icon reads "battery not charging" with power adapter lit "green". Do I replace battery or power adapter?

    icon reads "battery not charging" with power adapter lit "green". do I replace the battery or the power adapter?

    Go to the Apple in the upper left corner and select About This Mac, then click on More Info, then select Power from the left hand column of the System Profiler. Copy and paste the Battery Information back here.

  • No AC Power, Battery not charging, Windows boot up issue

    Searched the forums but could not find an answer for my specific problem.  
    COmputer: L355 - S7905
    Windows XP Professional
    Issue: installed new motherboard.  When on AC power, laptop shows a steady green LED light but will not boot up without the battery installed.  Will not stay running when the battery is removed or dies.  When plugged into AC power, battery charging light is on but battery continues to lose power; will not charge.  Had the computer operating properly initially but noticed the power issue.  I ran a chkdsk on one of the subsequent boot ups and now have a "config.sys file missing" error and can not get into windows any longer.  I was going to try some of the battery charging suggestions listed on this forum but no longer can get into windows or the recovery council.  Last screen attainable says to select "R" to repair system using a Windows disk.  Can not get to a DOS prompt.  
    Status so far:
    - Ran volt meter check on power adapter and getting steady 19 volts.  Various motherboard checks with a voltmeter are seem normal.
    - All LED lights on laptop are indicating the computer is working in a proper state (ie power light on, batt charging light on, HDD light on when in use, etc)
    - replacement motherboard is the EXACT same motherboard as the original.  Same model - identical.
    - Can get passed BIOS screen successfully; can get into boot options screen (Safe Mode options, command prompt, etc) but all options eventually default to an error message I get from the chkdsk program and I can not go any further.  
    - Laptop did not come with an original Win XP restore disk.
    - Battery is a replacement but is the exact same part number as on the Toshiba original battery.  Battery seems to be operating perfectly once it is charged (had to go to computer accessory store for charge)
    Questions:
    - Why is the AC power only not able to run the laptop??  Is it a software issue??
    - Once I can get into the windows OS, I presume I should be able to correct the battery not charging issue . . . is that right??  Sounds like it is a software issue from what I have read on the forums.  My plan was to reinstall the Windows operating system but I can not do that on battery power alone.
    Any suggestions on how to proceed??
    Thank you - Paul
    Solved!
    Go to Solution.

    Lawrence - Your suggestion was right on target, the replacement adapter solved my power problem.  I would have never believed that to be the problem since the digital voltmeter was indicating the required 19v from the defective adapter, I would obviously NOT have figured this out on my own.  Thanks for your time, response and help on this issue, I really appreciate it.
    Paul

  • DV4 1275 Power Issue, Battery not charging, Will not Power with AC only

    HP Pavillion DV4-1275mx
    Battery will not charge, Laptop will not fully turn on with battery in (battery not charging at all).  Laptop will not power on at all with no battery using only AC and with battery it will attempt to load and die due to lack of charge.
    Have tried 3 diff HP chargers.
    The orginial 1 that came with the laptop is dead and will not charge anything. Tried it on a diff HP laptop and not recognizing any power
    The 2nd one is OE HP laptop diff model but same wattage that came with my gfs work laptop.  I have charge my laptop with it before in the past however it is not charging the battery now either
    The 3rd is a aftermarket generic one that my g/f bought in the airport and it works with hers as well however I have never used it on mine. 
    I have tried hard resetting.. taking out battery, holding power for a min and replugging everything.
    Also when I remove the battery and plug in either of the chargers that do work the power LED are "not" lighting up on the front or the LED where the AC plugs into the laptop.  Which makes you think the charger is bad however the 2 working chargers do work on my other 2 HP laptops.
    If i plugin one of the 2 working chargers with the battery it will go through the boot process and as its starting windows it just dies and shuts off.  The power led by the DC jack does light up and the charging light on the front lights up. However this only works when I unplug the battery and plug the AC charger in. After the laptop boots up to starting windows and dies. I have to remove the battery and replace it to get the LEDS to light back up..  If the MB was bad I wouldnt think any of the LED's would come on nor would the laptop boot up to the starting windows. If  keep trying to turn it on the booting time is shortened as the battery is not holding a charge and sometimes it only makes a few seconds and then just dies out.
    I dont have alot of money to spend so I was hoping maybe you could point me in the right direction.
    Should I buy the replacement part OE charger for my specific laptop? (not sure if its going to be much diff than the others since they are all 65 watt chargers)
    Should I buy a new battery as well?
    Or does this sound like a short problem in the mother board or a solder issue with the DC plugin?
    If it is an issue with the motherboard I do not want to go through the hassle of buying the battery and charger as I will end up having to just replace the laptop
    If you could please advise me what direction to go I would be so greatful.

    Dude, I have the same exact problem with mine. It's not a cheap fix either. It definitely is the motherboard.
    I'm no expert, but I believe the problem is a dead capacitor on the motherboard preventing it to build up a charge.
    I spoke with an HP rep, which told me it's $398 for them to fix.
    I let them know that I didn't have another $400 to put into this laptop. So, they suggested I try reseating the motherboard. And also reseating the memory modules.
    http://h10032.www1.hp.com/ctg/Manual/c01597750.pdf
    That is a pdf of the laptop's manual. It'll help in reseating. Page ( 59 ) for the motherboard. Page ( 67 ) for the memory modules.
    This hasn't helped at all with mine, but maybe it'll help with yours!

  • Macbook Pro 2011 battery not charging error code

    My Macbook Pro just turned 1 year old and the battery might be defective or dead ( Warranty just passed by ) it originally cam with Snow Leopard but I WEB upgraded to Lion (which was far from being easy ... had alot of crashes and hanging happening)
    I have the now infamous battery not charging problem. The OSX status bar shows the battery icon with a 'X' meaning no battery. I think the MacBook is not charging the battery because OSX doesn't see a battery.
    Today I just noticed that (IMPORTANT) with the power adapter connected, pressing the battery power level button displays a 5 blinks code. Otherwise with power adaptor not connected, the battery seems even too weak to light up even a single LED".
    Even though I do a proper shutdown, it is to note that the MacBook Pro starts right away when I plug the power adaptor. I starts right away without me even pressing the power button.
    Yerterday I really though the MacBook Pro was not going to work anymore, it kept abruptly shuting down again and again. I couldn't do any of the work I was supposed to.
    I did PRAM and SMC resets and eventually I was able to startup the MacBook Pro and do some work but the battery still remains unavailable.
    I have 2 of the same 85 Watt charger ( the first one being from a previous MacBook Pro 2008 --- which is waiting to get a repair ) and both performs the same: not charging.
    Maybe the battery discharged beyond the point it can be seen my the MacBook Pro and OSX. Just like car battery, if it get discharges way too much, you won't even see the nominal voltage on the terminals even without any load.
    EDIT: just noticed that even though it looks like no battery OSX reports that power source IS BATTERY (in the OSX status top bar )

    It's like mpg for a car. It depends upon how you drive, the weather, the terrain. "7 hours" doesn't mean anything. Your mileage will vary. If I am not doing anything I see 13 hours. As soon as I start surfing or watching a video it changes. Stop obsessing.

  • Battery not charging and MBP not waking up from sleep

    I've got both of these issues happening. Sounds like I just have to wait it out on the sleep issue until a point at which Apple will issue a fix. The battery not charging is becoming especially frustrating though. I've had the computer for about a month and it just started a few days ago. I've checked the battery to see if it qualifies for replacement and it has the correct model number but the s/n has a different last for digits. I've unplugged/removed battery/held down the power button and no change, the battery still does not charge. Seeing as the MBP will run with the power cable inserted and the battery removed, I'm assuming that the cable's ok, the light has rarely come on at all lately -- no green or amber. Any advice here? I'm getting pretty frustrated with this thing.

    I met the same issue, the difference is while i touch the track pad or move mouse or hit keyboard, the screen responds rapidly and then back to black. tap the keyboard, it beeps... I can do nothing except "command+control+power" to restart or long press power to power off it.
    I found it only happens after I installed 10.8.2, it works well before 10.8.2 update.
    any help please?

  • TS3499 My 2012 Macbook Pro recognizes that it is plugged in but says not charging.

    My 2012 Macbook Pro recognizes that it is plugged in but says not charging. The LED light on the L shaped power adapter is not illuminated. I've tried cleaning it, updating my software, everything on this Apple support page: Portables: L-shaped MagSafe power adapter does not charge computer and LED indicator light does not illuminate
    Is there anything else I can try before I have to take it into the Apple Store? I live in a rural area and it is about a 3 hour trip to the nearest Apple Store.

    I have also reset the SMC with no avail. :/

Maybe you are looking for

  • Track users activity on on the switch

    HI team ,  Thanks in advance....   Is there any show commands available for find which user execute which command in cisco switch.in the show logg I can see only which user logged in to the switch at what time but cant able to find what thy done afte

  • Connect two monitors to a Pavilion dv6t-2300 laptop (Windows 7 64)?

    What type of connector do I use to use two monitors with my Pavilion DV6t-2300?

  • Lumia 800 & Error code 80180048

    Having waited patiently for EE/Orange in the UK to come up with the 7.8 update for my Lumia 800, there was great rejoicing when Zune finaly showed it as available - then gloom as the update only gets so far before throwing up an 80180048 Error Code. 

  • Everything is word

    I exported a pdf file to word, now every pdf file I have has automatically changed to word. I cannot even save a pdf file now, it just saves as a word document ?

  • HT4061 Restored Phone had no sim card and is now locked. Wanted to use as Ipod

    I have an old Iphone and was not using. It dosen't have a sim card. I intended to use it like or like an ipod. I did a restore and now it is locked and message on phone says to install a sim card. I don't want to use it as a phone. What can I do to g