Magsafe light is green all the time , fan is turning on and off

I noticed that my mac book pro 13 inch 2012 is not charging
and battery was zero .
Initially when I try to plug the power supply , I get a green light for 5 sec  then nothing.
I checked every thing possible with no benefit, so I tried to do SMC for more than 10 times with no response.
at the end instead of solving my issue, I  started to get green light all the time when the mac connected to the power supply.
also the fan is working intermittently .
I am convinced that the mac is not recognizing the battery somehow
Any suggestions please

If you have reset the SMC already, I would take it in for diagnosis.
Barry

Similar Messages

  • Hello, My white McBook (2008 or 2009) recently stopped turning on.  When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound.  I've tried the re-boot option, but nothing works.  Please advise!

    Hello,
    My white McBook (2008 or 2009) recently stopped turning on.  When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound.  I've tried the re-boot option, but nothing works.  I first thought I needed a new battery because the lights at the back are all off, but shouldn't the computer turn on once the power adapter is hooked up and the light on the Magsafe adapter shows green?  I'm a computer doofus, so please be kind.  Please advise!  Thanks in advance.
    SS

    Take it in for service.

  • For the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    for the iphone4, my light is on all the time! the light is supposed to turn off after a few seconds of use. how can i fix this?

    If what Allen says does not fix the issue I have seen this as a Hardware issue and I would get into an Apple Store if it is close by
    http://concierge.apple.com/reservation/us/en/

  • N95 8GB camera light stay on all the time

    I have had the N95 for 5 months and have been very pleased with it. I have now developed a problem with the camera light. not sure how or when it happened. Other than the fact the camera light stays on all the time, the only way to get the light off is to remove the battery...!!!
    Is there a simple solution or does this need to be returned for repair

    Hi I've been having this same problem this week! I'm going to wipe my phone and re-install the software update and see if that works, otherwise it's off to Vodaphone to be repaired
    It's strange it's just suddenly started doing it, and it's been a while since I first installed the latest update, when it came out.
    D.

  • My Led flash light switch on all the time,anybody got the solution.i tried 3 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the

    My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the apple logo appears.  4.reset my all settings.

    My Led flash light switch on all the time,anybody got the solution.i tried 4 things but it couldn't solved the problem. 1.settings-accessibility-LEd flash off   2. Switch off the phone for several times.  3.press the home button n power button until the apple logo appears.  4.reset my all settings.

  • How do i get the time to stopping coming on and off on my black screen. is that daydream

    how do i get the time to stop coming on and off on my black screen. is that daydrea

    https://motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/a_id/95499/p/30,6720,8882

  • Clicks & glitches in the automation when bypass turns on and off

    I get clicks & glitches when I automate logic plugins to turn on/off (bypass) on an audio track. The clicks & glitches happen at the point in the automation when bypass turns on and off.
    Has anyone else experienced this?
    Who can help me with this?
    Thanks so much
    ps - I use Logic Pro 8

    Certain fx plug ins unfortunately just do that when you switch them on and off while audio is passing through them. It's not technically a bug, it's just the way the audio is handled by the plug in that means it can't manage to cleanly cut in and out. When this happens, you have to use alternative methods such as the one already suggested. Depending on what you need to do there are other ways around this. If you're able to engage/disengage the plug in at moments of silence in the audio (such as in between words in a vocal track), then you could use volume automation to go in very precisely to silence the clicks when they happen. But if you're automating the effect on continuous audio, sereen's suggestion of using an aux and automating the send is a more appropriate workaround. Another technique is to just bounce an entire copy of the track with the effect on it, and then just edit it in and out (still on a separate track if you like) as needed, this way you can use fades as well to clean it up. But this is only appropriate in certain situations and might not be the right approach depending on what you're doing.

  • HT4381 apple tv, does the light stay on all the time, or is there a way to turn off the apple tv when not in use?

    the light on the apple tv stay on all the time? is there a way to turn it off or put it on stand by?

    No, it doesn't need to stay on all the time. You can leave it on if you want, since it uses little power, or you can go into settings and select sleep. You can also use the remote to achieve this (hold the select button for 5 secs)

  • Why does my home screen light stay on all the time.

    My homescreen stays on all the time.  The only way to turn it off os to puch the top button. It even stays on while its charging.  Its draining my battery! HELP

    Check Settings>General>Auto-Lock and see what the time setting is.

  • So I have an iPad 2 for two years. Has never been dropped or in water or damaged in any way....now the volume is distorted and I get booted off the web all the time. Plus it shows and no service in top left corner. Any one have these issues?

    So I got is iPad as a gift and the same issues I had with my iPhone 4S is also happening with my iPad. Will Apple cover the problem as it lies within there updates or something. All I know I have taken perfect care of both products and volume is distorted. Can't listen to music, I get booted off the web all the time, I can't even chat with Apple icare it won't work and no service shows on top left corner. What is wrong with Apple products? I'm thinking it's time to switch! I've had to change my iPhone twice now......first time for mic not working and then camera shutter kept sticking. Same on my iPad........ I don't want to pay to get this fixed as it's not my fault this is happening...... It's software apparently?

    This really is starting to feel like a hardware issue than a software one.
    Especially if hearing noises when you connecting up your iPad for charging.
    Something happened to your iPad that has nothing to do with a software update.
    This is why I recommend that
    I can't help you any farther.
    It sounds as if you really need to take this iPad in for a repair.
    Since you are reluctant to do this, there is nothing more I can suggest to you.
    Good Luck on whatever you decide to do.

  • I have to install/uninstall/install the program almost all the time?Its Creativ Cloud and Dreammweawer What to do?

    Hello! My problem is that I have to reload all the time the programs!

    Federicos96329345 what is causing you to need to reinstall Dreamweaver?  Do you receive a specific error message?  What version of Dreamweaver are you installing?  Finally what operating system are you using?

  • I have bad eyes so I need zoom bigger print all the time. An I reset and see always going from small to bigger every time?

    It would be nice so that my bigger print with Firefox and to see all by bookmarks without changing the print from small to bigger or just print so I can see all th pages all the time?

    To print larger fonts of a page, select print preview. Then change the 'scale' to an appropriate size.

  • What to do if the Wi-Fi Keeps turning on and off.?

    my wifi turns on and off when ever it wants to , and advice.?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • Adapter light stays on all the time...

    My battery stopped charging on my MacBook a couple of weeks ago and since then it's had it's DC Inboard replaced, logic board replaced and battery replaced.
    When I first got home with it last night the adapter was not working - just showed that it was plugged in but not charging - dh has a MBP and my adapter didn't work with his either and his power cord worked fine on my computer.
    Today - tried my adapter again and it worked - but light stayed green even when it was charging - unplugged from my computer and the light stayed on, unplugged from the wall and the light still stayed on for a bit. Plugged it in again, didn't work at all. Plugged it in again with three prong into wall and it worked - is charging with amber light on right now however, when I unplug it from my computer the amber light just stays on. Also - my battery is 100% and the amber light did not change to green, said that it was still charging?
    Am I making any sense at all? Do I need to get a new adapter or what the heck is going on now???
    Thanks for any help you can offer.

    The problem was the adapter itself - got it replaced and have had no problems!

  • Blue/White light staying on all the time - Houston, is there a problem?

    I use a 1tb Free Agent drive for Time Machine, and it has a blue-ish white light that comes on when it's working. For instance, it always comes on when I wake up the machine.
    This morning, it's on - and it's staying on. The drive is not full. It appears to be backing up properly. But the darn light is on. So I ask, Houston - do we have a problem here?
    Thanks.

    Digital Gee wrote:
    This morning, {the light is} on - and it's staying on. The drive is not full. It appears to be backing up properly. But the darn light is on.
    Open the Time Machine panel of System Preferences to see what Time Machine is doing. I'd also look at the Spotlight icon at the right end of the menu bar. If there's a dot in the middle of it, Spotlight may be trying to index the external drive. If you don't want it to do that, you can add the drive the the Privacy tab of the Spotlight panel of System Preferences.

Maybe you are looking for

  • Query getting  /crystal/ Program SYNTAX ERROR.

    Hi All, I connected to SAP BEX Query using MDX driver. when i execute query getting  /crystal/ Program SYNTAX ERROR. I imported these  crystal transports R21900741,786,695,754,780 . but got error for R71K900087 . MY SAP BW system version is SAP BW701

  • Prob. with Templete in Smartforms

    I am new to smartforms. I have a scenario where I have a template of 4X3 matrix  I have to put some values and text within as Tot. Discount | value | value Tot. VAT        | value | value Tot. Excise     | value | value Grand Tot       | value | valu

  • [ServletException in:VIView1_Browse.do] Response has already been committed

    Hi, I have a JSP-Struts application. By the default generation, JDeveloper build a main.html Page. This page have many Frames and one Frame is "navFrame". On this frame I have a link for a JSP Page : Browse. The call is OK. No Problems. No I have ano

  • Acrobat fixup to make spots black

    In my workflow I like to set single color press jobs in black, that way if the spot color changes I don't have to mess with changing my file over and over, and also, I'm an old horse and this is the way I've always done it. (not a good reason, but a

  • Setting up a Voice call from ONT/OLT to Softswitch via SBC

                       Hi,                          I am setting up a voice call over SBC to softswitch basically SIP over ISUP,now i have a small issue that my SIP user is getting registerd at both SBC and Softswitch and able make OG/IC calls. Now my qu