MagSafe plugged in, orange charge led, time counter going down

I've been plugged into 110v AC in my RV. MagSafe is plugged in, orange charge LED is "on" and the icon shows the lightning (charging symbol), BUT the time counter going down and down, and not in real time, more like football min's. We are running a bunch of other things like heater, another G4 and lights. Could this just be not enough coming through the single extension cord (NOT 30amp)?

Yes Pink that is the case the LED lights stay yellow for charging and the white one for plugged in. When i turn it on now the screen doesn't show up and it turns off. And it does not turn on with the AC adapter only. I tried a new one at a local store but no luck with that either.
I had the latest bios update before the most recent one:
http://gulf.computers.toshiba-europe.com/innovation/download_bios.jsp?LNG=13&service=AE
sadly i can't update it if it won't turn on :(
I took it to the Toshiba Center today they said its a hardware issue. its only been a month and a few days /sigh im so bummed out atm i hope the motherboard won't have to be replaced.
thanks

Similar Messages

  • When plugged up to charge, Mac book pro shut down and will not boot now

    Im using my computer for work...then all of the sudden I get a notification telling me my battery is low so I plug it in. Then a few minutes later, my mac goes black like it had died from a dead battery. I let it charge for a few minutes and come back to turn it back on and I cannot get it to boot. Nearly two hours later, I'm still sitting here. I need some help! Thank you!

    Try SMC and NVRAM resets:
    https://support.apple.com/en-us/HT201295
    https://support.apple.com/en-us/HT204063
    Ciao.

  • Nx6325 charging led solid amber with no battery and wont power.whic​h motherbrd component is faulty?

    I have 2 nx6325s.one has developed a fault where with the charger plugged in the charging led flashs once green then goes solid amber with or without the battery connected.The laptop wont power on.The charger and battery are both good as tested on the other laptop.I suspect a component in the charging circuit has gone faulty.Would any one know which component I should look at and what to measure.
    Thanks 

    >If I remove the battery the laptop will not power on either and only when using a fully charged battery will the laptop power up. The battery icon shows it to be charging only briefly when I plug in. I've even tried another AC charger even though mine is good (tested) and also tested with another battery to no avail.
    Indeed, it sounds like something wrong on the motherboard it could be related to power supply electronic which is placed on the board power problems can be related to faulty RAM modules too so maybe you should check the RAM firstly remove one single module and try to power up the unit using one module in different slots
    Otherwise you would need help from a notebook technician... ;(

  • Macbook Pro retina display 13 inch stopped charging. Charger LED also not on while plugged in. The battery fully drained off but the system can detect the charger when it was switched on.

    Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.

    Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
    You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem.

  • MacBook Pro won't turn on after crash. Magsafe charger LED light blinking rapidly

    Hi. I hope you can help me.
    I have a macbook Pro 13", from september 2012, which crashed earlier today:
    I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
    My MacBook was charging through the magsafe charger (about 30% power i think).
    I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
    My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
    The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
    This time nothing happened when I pushed the power button. It had comepletely shorted out.
    BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
    Typical and just my luck!
    Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
    Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
    Thank you so much in advance!
    Kind regards Emilie

    Try the SMC reset again:
    https://support.apple.com/en-us/HT201295
    Then try a NVRAM reset:
    https://support.apple.com/en-us/HT204063
    Then try a safe boot:
    https://support.apple.com/en-us/HT201262
    If no success, then you will have to take it in for service.
    Ciao.

  • New 12" PBook, battery 100% charged plug orange, charger very hot.  Why?

    New (refurb) 12" PowerBook arrived three days ago.
    This evening I noticed, for the first time, that the indicator in the menu bar indicated that the battery was 100% charged. But the plug stayed orange.
    After about a hour in this condition I also noticed that the charger was extremely hot. The charger for my G3 iBook never got so hot. I unplugged the PowerBook.
    Anyone know what's going on here?
    12" PowerBook 1.5GHz Mac OS X (10.3.9)
    iBook 900G3   Mac OS X (10.3.9)  

    sounds like a malfunction with the adapter...if u unplug adapter does the battery still charge computer and show a high charge ro does it slip as soon as u unplug it?

  • My MacBook is plugged in with a green light and shows it's plugged in, but is not charging.  When it's unplugged, it dies.  It was charging last time I used it but not any more.  I am no computer whiz and need detailed info on what to do  Thanks.

    My MacBook is plugged in with a green light and shows it's plugged in, but is not charging.  When it's unplugged, it dies.  It was charging last time I used it but not any more.  I am no computer whiz and need detailed info on what to do  Thanks.

    The model 2,1 MacBook has an easily removable battery. You can get a new third party battery fairly cheap on eBay. Every MacBook from 2006 through Mid 2009 except the Late 2008 Aluminum Unibody and the Late 2009 and 2010 White Unibodies use the same A1185 battery.
    Black Batteries http://shop.ebay.com/i.html?_nkw=macbook+black+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+white+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    White Batteries http://shop.ebay.com/i.html?_nkw=macbook+white+battery&_sacat=0&LH_BIN=1&_sop=12 &_dmpt=Laptop_Batteries&_odkw=macbook+black+battery&_osacat=0&_trksid=p3286.c0. m 270.l1313
    Or for $129 from The Apple Store  http://store.apple.com/us/product/MA566LL/A?mco=MTY3ODQ5OTY
    Removing the battery:
    Shut down the computer. Disconnect any cords connected to the computer.
    Turn the computer over.
    Locate the battery latch on one side of the battery.
    Use a coin to turn the latch a quarter-turn clockwise. The battery should pop up slightly.
    Lift the battery out.
    Installing the battery:
    Place the right side of the battery into the battery compartment at an angle, as shown below.
    Gently press the left side of the battery down until it sits flat.
    While holding the battery down, use a coin to turn the latch a quarter-turn counter-clockwise. The battery should lock into place.
    Note: Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer.

  • Macbook Pro shuts off multiple times per day while plugged in to charger, won't restart until charger is unplugged?

    Hi,
    I have a 15" Macbook Pro 2.4GHz running OS X 10.6.8.
    I have a brand new (4 week old) battery and brand new charger (Battery was replaced because the OEM battery swelled up and started to split open, which also happened on my prior two Macbook Pro 17"). 
    I leave the laptop on 24/7, while plugged into the charger.  Every single day, the laptop shuts down without notice, while I'm not using it, and with nothing running, except Google Chrome on occasion.  When I return to use the laptop, it will not turn on with any kep press or by pushing the power button, but the MOMENT you unplug the charger from the side, it turn on instantly, WITHOUT using the power button.
    The battery works flawlessly, holds a charge and lasts a long time, and then recharges as normal, so it doesn't appear to be the battery; and the charger obviously works because it's keeping the battery charged every day 24/7...so why is my laptop shutting off EVERY single day, twice a day or more?  It's nothing in my energy saving settings, nor is it a software error.  I have also reset the PRAM which did nothing.

    Nothing that anyone says here can repair damaged or faulty hardware. Use this page to locate the nearest Apple Authorized Service Provider — there are several in Vermont:
    http://www.apple.com/buy/locator/service/

  • I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.

    I just got a new ipod 5 and when I plugged in the charging cord that came with it, it says it is not supported, and may not charge. It worked the first few times, but now it won't charge at all.

    - See:      
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. The cable as well as the iPod, is covered by the warranty.
    Apple Retail Store - Genius Bar                          

  • When charging my laptop and laptop is off, charging led blinks for 3 or 4 times then start blinking

    i have hp dv7-3183cl, when i put my laptop on charging and its turned off, charging led blinks for 3 or 4 times then it starts charging, what it means

    Hi,
    I don't know people call this but we normally call it as an "handsake", all smart batteries should do this way.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How  long to leave plugged in to charge ipad mini? should ipad mini be powered off when not being used for a long period of time (several hours between usage times? Please respond this ipad mini is new and I would like to keep it in good condition.

    How long should you leave an ipad mini plugged in to charge? How low should the battery be? Should I power it down when I am not going to be using it for several hours between uses? Thank you. I NEED to know these things.

    About iPad Batteries  >  http://www.apple.com/batteries/ipad.html
    ssutton709 wrote:
    How long should you leave an ipad mini plugged in to charge? How low should the battery be?
    Charge it when you see the Low Battery Alert. It is not recommended to Fully Discharge the battery.
    Use Your iPad Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    ssutton709 wrote:
    Should I power it down when I am not going to be using it for several hours between uses?
    This is not necessary.
    Most importantly... Enjoy your iPad

  • Magsafe light flashes orange/green

    I've just bought a used MBP 2.2 MHZ which operates fine except for switching back and forth between charging modes when the battery is around 85% full. The magsafe light stays orange a few seconds, then shows green for a second, then back to orange; the charging indicator on the screen switches at the same time. I swapped to a known working magsafe charger - same result. Operating on battery power is also a bit strange, with the available percentage of battery jerking around. Looking around, I see some 2007 and 2008 threads about this issue, but no final resolution at that time. Is there now a "bottom line" to this problem? Thanks!

    No, it's not a battery calibration issue - but it could be a bad battery. The flashing MagSafe is a hardware issue. Since the SMC is the controller for power systems, resetting it is about all you can do for 'software' type of fix. If that doesn't correct it, the problem is either with the adapter itself (which you apparently ruled out), with the battery, or with an internal component (more likely the left I/O board, but possibly also the logic board itself).
    The fact that your available percentage jumps around points to a deeper problem (time remaining can jump around depending on system load, but % charge should go in only one direction when running on battery).
    Given your symptoms, I'd be inclined to try a replacement battery first, before looking inside the case for a problem.
    If there's an Apple Store near you, make a Genius Bar appointment and let them have a look - they will be able to test the battery as well.
    If you like, post your Full Charge Capacity and Cycle Count (from Apple menu > About this Mac . More Info > Power) for a preliminary diagnosis...

  • MacBook Pro won't turn on after crash. Charging LED blinking rapidly

    Hi. I hope you can help me.
    I have a macbook Pro 13", from september 2012, which crashed earlier today:
    I was charging my iphone through USBport on my macbook (not an Apple USB-iPhone power-cable) .
    My MacBook was charging through the magsafe charger (about 30% power i think).
    I took the phone out to make a call, when that was done, I reconnected the phone to my mac for further charging.
    My MacBook crashed instantly. I took out the USB cable, tried to turn on my mac, but nothing happened. There was no light in the magsafe LED.
    The crashing has happened before, when I've been charging my phone through USB connections, but I've always been able to turn my mac back on.
    This time nothing happened when I pushed the power button. It had comepletely shorted out.
    BTW. Earlier today I received a "storage almost full" warning on my mac, and I was actually in the middle of cleaning that up (deleting downloads and trash files).
    Typical and just my luck!
    Now, a few hours later, I tried restoring SMC (shift+ctrl+alt+power), and now the charger LED is blinking rapidly (but faintly) orange.
    Do you have any ideas on how to fix this? All applestores nearby are closed today, I live in Denmark.
    Thank you so much in advance!
    Kind regards Emilie

    Try the SMC reset again:
    https://support.apple.com/en-us/HT201295
    Then try a NVRAM reset:
    https://support.apple.com/en-us/HT204063
    Then try a safe boot:
    https://support.apple.com/en-us/HT201262
    If no success, then you will have to take it in for service.
    Ciao.

  • I can't charge my DM1-4110et (plugged in, not charging)

    Hi,
    I just bought a dm1-4110et 1 weeks ago. My battery not working properly since first day.
    Details about my problem;
    My battery can't charge when notebook working. If I plugged in, Windows says "plugged in, not charging". I've tried ACPI trick and don't work. Led lighting white.
    When I turn off pc, disconnect ac adapter & batery and reconnect them, notebook start charging and led ligting orange. But; if I turn notebook on, led turns white.
    I've tried bios update, acpi trick, calibrating.. don't work. Probably I need to go service.
    Any ideas?

    Sorry, here is what i did
    1.  Turnn laptop off, remoove battery, reinsert battery, plug the Charger, Charging starts (Orange light)
          But as soon as I start laptop, charging stops.
    2. To keep the charging while using laptop, download and install HP Power Manager, during installation you will see laptop is charging again. Solved
    3. When you restart your laptop, same not charging occurs. To solve this just go into where HP Power Manager is installed, default path is C:\Program Files (x86)\Hewlett-Packard\HP Power Manager, select SCHEME.BAT, you will CHARGING. Place scheme.bat shortcut to desktop, and next time just use the short cut

  • I'm getting a Plugged in, not charging message after replacing the CPU fan

    I just replaced the CPU fan on this notebook last night and finished it today. Its running perfectly at the moment.
    The problem is the windows Task bar on my desktop says "Plugged in, not charging" when I mouse over the battery indicator there. I've tried many things to fix it, from uninstalling or disabling the drivers for the devices involved (the ACPI battery and AC adapter) under Windows' device manager, to swapping out with my spare battery.
    I've also switched power plans on the off chance that could have been causing some kind of battery charging setting. This did not fix it. The AC adapter works. I've been running this notebook for about two hours now searching for a solution, it just won't charge the battery. I've not tried observed it enough but I believe it will charge while powered off, but not while on. The orange LED indicator by the AC adapter port glows when the machine is off, indicating that it is charging.
    I have a feeling the whole "uninstall device drivers for the battery devices" idea is a thing of the past. Everything I found which suggested doing that also mentioned Windows Vista, which at this point in time is a relic (July 2015). When I was replacing the CPU fan, it did get frustrating at times but everything is intact apart from some case clips and a few other plastic case parts. I have reason to believe everything is connected too because its still powered on, meaning its getting power, but it isn't going in to the battery.
    Symptom summary:
    Batteries: OKAC Adapter: OK
    MOBO: PROBABLY OK
    ME: NOT OK   xD

    Hey srkv121,
        welcome to the forums
    On
    1. Optimized battery run time, the energy managment completely charges the battery to ensure maximum battery performance
    2. On best battery health, energy management charges only 50% of the battery, it ensures maximum battery life but not performance
    hope this helps
    regards
    Lets make 2015 the year of the #DO
    Did I or someone help you today? Press the star on the left to thank them with a Kudo!

Maybe you are looking for

  • Install a Test/Dev instance for SAP MII.

    Hi, I want to install a test/development instance for SAP MII on my laptop [2 GB RAM]. Per my understanding, for this i would need set up SAP NetWeaver CE instance and deploy SAP MII 12.1 component. I also want do some custom development & integratio

  • Pixelated Images Printing

    I am new to Pagemaker and Im trying to create a little flyer for my youth group. The images are all jpegs, and when I use the 'Place' option they were showing up fuzzy. So I changed the view to 'high resolution' and now they look great on screen. But

  • Estimation of ABAP development taska

    Hi all is there anu specifik methode for estimation of ABAP dvelopment tasks. for example how should one etimate how long a program will take whether it is a report or a function or otheres. Thanks.

  • Bulleted List Question

    I'm applying a new style for my company's technical data sheets. The designer created a new bullet using a Wingdings 3 symbol. I incorporated that symbol, a lower case u that displays as a triangle rotated 90 degrees to stand on one tip. I copied tha

  • Never include orig. message into bounce message/DSN

    Hi all How can i configure IronPort to never include the original message body into bounce messages or DSNs? I would like to always include header information (sender, receipient, subject) of the original mail, but never body information or even atta