Mail 4.2 started overloading my computer when posting a reply
Hi
Recently my Mail program is OK to start, but when I try to reply to someone's email, the text I enter stalls, the beach ball starts, and then I can only get another word or two in when the ball stops, until the ball starts again.
Also, it seems that the processor itself is overwhelmed, making it very slow to start up other apps while Mail is using all the computer's resources. This was a sudden occurrence; restoring from Time Machine of the plist from the previous day did not help, and re-installing Mail from disk did not help. Help!
Regards,
Glenn
Sounds like an impending failure of the phone. Try to get a good backup of all data and photos. Then Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.
Similar Messages
-
I really need help! I just got this MacBook Air almost two weeks ago. It is a refirbished one. Now lately, when I put it to sleep and then get back to it, it won't wake up. It just gives me a black screen and a running noise. Sometimes it does it too when I shut it down. And sometimes it will work fine as if it never happens-i move the mouse and the computer starts up. I am deaf and living on campus for school, so there is no chance for me to get some help through a simple phone call and there is no nearby apple stores or providers.
Please help me, I do not want to go back to my Dell computer.
Ronni.I'm not certain but my new MBA 13...when in sleep mode comes back on from a black screen when I simply click on the left mouse button. Also, one time I did a SECURE EMPTY TRASH on files that totalled more than 1GB and it took so long that the fan kept increasing in speed so I pressed on the POWER button and the MBA shut...I was able to boot up with no problem. As a rule, I now only do secured erases for trash bin data totalling 500mb or less...anything above that gets a regular erase (dump).
-
No email alerts when post are replied to
I don't get an email alert when I get a reply to a post. Please can anyone tell me why and how to change this.
Other uses have reported the same problem. This occasionally happens and there is nothing you can do. It has been reported to Apple.
-
No signature when forwarding or replying
my signature (html file) is only inserted when composing a new mail, not when replying or forwarding a mail. Signature should also be inserted when forwarding or replying. How to solve?
Tx, KoenFrom the menu bar select Tools-Account Settings-Composition and Addressing
No menu bar with tools? Press the alt key. -
I am noticing that my Mail starts up or Launches up when my computer starts up, I must of did something to create this, I want to stop having my mail start up when my computer boots or starts up, how to I stop it from doing this?
I tried looking in the mail prefs but I didn't find anything, I tried looking in my system Prefs and I didn't see anything in their too to keep the mail from starting up at computer start up, if there is a turn off spot in the Mail prefs or in the system Prefs I am not seeing it.
Does anyone know how to turn this off?
Mrs. FosterI Tried that and then did a Restart didn't do any good, the mail still started up when the computer booted up, have another solution? to turn this off?
Mrs. Foster -
I keep getting a message "The MobileMe IMAP server ... rejected the password for ...." I can use that password when I go to iCloud (and to this discussion), but my e-mails won't download to my computer. What's the mix-up?
If the setting is greyed out perhaps you have restrictions enabled that would prevent someone from changing accounts. Settings>General>Restrictions>Allow Changes>Accounts.
-
Is there a way to avopid my iMac opening all my previously used applications everytime I start up the computer every morning.
It's especially annoying if I have clients with me who I dont want to see what I have been previously working on.
This applies especially to Photoshop and IndesignIf
Launch System Preferences and click on the “General” icon
At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps” -
My Ipod Classic appears in My Computer when I connected it to my new Windows 8 pc. When Itunes starts my Ipod is no longer appears in My Computer and is not shown under Devices in Itunes. It appears that Itunes disconnects my Ipod from the pc. My Ipod still sync's up fine with Itunes on my old Windows XP pc.
See earlier post by tt2
https://discussions.apple.com/message/7217190#7217190 -
I have the latest version of Itunes but it freezes my whole computer when it starts up
I have the latest version of Itunes but it freezes my whole computer when it starts up. I have installed/reintalled Itunes but it still stops my whole computer when I start Itunes.
OK, so we rule out LSP then,
Try following steps one at a time and test your itunes:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator", now try your itunes.
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR. -
hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab. -
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
When power on and start up my computer start and then power off
Hello
When power on and start up my computer start and then power offwhether you hear Mac Boot sound?
if not may be your Harddisk is failed to start -
I press option when starting up my computer and it just hangs or at least never gives me the list of startup disks before it's booted up. I can choose which startup up disk when I'm already booted up from settings --> Startup Disk but how do I know if my Macintosh HD internal drive disk fails I'll be able to boot from my supposedly bootable backup drive?
What am I missing? I have the latest Mountain Lion, could this be bug in that new Op System?
Does the startup drive list (before bootup) only show up if the Macintosh HD is not bootable (crashed or broken)?
DaveReplugging my keyboard into my front USB2 slot was half the solution. I had my keyboard plugged into a KVM switch which goes into the back. The other half was that I needed to unplug my backup firewire hard drive from the front port to a chained drive with the source hooked into the back of the Mac Pro. Not sure if it was the cable or the firewire slot that gummed up the hardware startup hard drive selection diaglog.
I also tried resetting the NVRAM and only got one Mac startup sound. That didn't seem to do it but then again it could of been a necessary condition as well.
Thanks everyone for your help.
Dave -
When I start up my computer, I get a window that pops up that says * AppleSyncNotifier.exe - entry point not found. it also says the procedure entry point xmltextreadername could not be located in the dynamic link library libxml2 .dll. . What does this mean and how can I get rid of it?
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck
Maybe you are looking for
-
HT1926 why PC says "invalid signature" can't install itunes update?
Trouble updating itunes. Message says "invalid signature" and aborts updating. How do I fix?
-
Can I write a single update query to update Data of one table to another <Table1> ID number fname varchar2(10) lname varchar2(10) <Table2> ID number fname2 varchar2(10) lname2 varchar2(10) Both the table contains data, and I want to write a single qu
-
Render PDF without viewing?
Hello, I have following szenario: I have an interactive form, I want to fill it with data retrieved dynamically and then I want to make the PDF downloadable without the need to show it in Reader first. The user shall continue to fill in data into the
-
ITunes doesn't see iPod (Vista 64-bit)
I connect the iPod touch to the computer and it charges, (duh-duh noise as if it's connected) but it doesn't appear in iTunes. I have tried it on Windows XP pro SP3 64-bit partition on my computer, and on Windows Vista 32-bit laptop and both work fin
-
User management -reporting service
Hi all NW04 portal.. Is there a reporting service that i could use that can be configured to display user-group-role info ?