Mail 4.5 does not receive 2 email addresses from friends

Why cann't I receive 2 of my friends email but I can receive on my other Mac Mail account? I have OSX 10.6.8 & Mail 4.5!

Have you tried rebuilding the mailbox?
select the mailbox you want to rebuild (your inbox or custom malbox you created)
click on mailbox in the menubar
select rebuild
If you have a lot of email in the mailbox it might take a little time to finish
I did this when I was no able to see all of my emails and it worked like a charm!

Similar Messages

Server does not recognize my email address

when i try to email something i get an error message that says the server does not accept my email address
?? any ideas

Was this group email successfully sent by your .Mac
account?
No; that was the first time I received the error message.
How many recipients were included with this group
mailing?
30+
Do you send a number of messages to a large number of
recipients on a daily basis with your .Mac account?
No; I do periodically, maybe 3-4 times a year to announce major changes with firm. Emails have worked in the past but possible I did them from my road runner account.
As with most other email accounts, .Mac has a sending
limit on the total number of recipients per message
and the total number of recipients for all messages
sent in a 24 hour period.
You ISP at home is RoadRunner but you use a different
ISP at the shared office?
Yes; trying to find out who it is.
If you are also accessing your RR email account with
the Mail.app and RR is not your ISP at the shared
office, are you able to send messages with your RR
email account and SMTP server when connected to the
internet at the shared office?
I access the RR email via the RR website, not via the Mail App.
Just hitting all angles in an attempt to eliminate
possible causes of this problem.

Clients not receiving DHCP IP address from HREAP centrally Switched Guest SSID

Hi All,
I am facing a problem in a newly deployed branch site where the Clients are not receiving DHCP IP address from a centrally switched Guest SSID. I see the client status is associated but the policy manager state is in DHCP_REQD.
The dhcp pool is configured on the controller itself. The local guest clients are able to get DHCP and all works fine, the issue is only with the clients in the remote site. The Hreap APs are in connected mode. Could you please suggest what could be the problem. Below is the out of the debug client.
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Adding mobile on LWAPP AP 3c:ce:73:6d:37:00(1)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Reassociation received from mobile on AP 3c:ce:73:6d:37:00
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'Guest-ACL' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific IPv6 override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying IPv6 Interface Policy for station 10:40:f3:91:7e:24 - vlan 81, interface id 13, interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 3c:ce:73:6d:37:00 vapId 17 apVapId 1
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 apfMsAssoStateInc
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Idle to Associated
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 49) in 28800 seconds
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sending Assoc Response to station on BSSID 3c:ce:73:6d:37:00 (status 0) ApVapId 1 Slot 1
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfProcessAssocReq (apf_80211.c:4672) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Associated
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4183, Adding TMP rule
*apfReceiveTask: May 24 11:35:53.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 3c:ce:73:6d:37:00, slot 1, interface = 13, QOS = 3
ACL Id = 255, Jumbo F
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 7006 IPv6 Vlan = 81, IPv6 intf id = 13
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sent an XID frame
*apfMsConnTask_3: May 24 13:26:49.401: 10:40:f3:91:7e:24 Updating AID for REAP AP Client 3c:ce:73:6d:37:00 - AID ===> 1
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 12) in 10 seconds
*osapiBsnTimer: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:4897) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Disassociated
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: May 24 13:29:09.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Sent Deauthenticate to mobile on BSSID 3c:ce:73:6d:37:00 slot 1(caller apf_ms.c:4981)
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsAssoStateDec
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:5018) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Disassociated to Idle
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [3c:ce:73:6d:37:00]
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Deleting mobile on AP 3c:ce:73:6d:37:00(1)
*pemReceiveTask: May 24 13:29:09.317: 10:40:f3:91:7e:24 0.0.0.0 Removed NPU entry.

#does the client at the remote site roams between AP that connects to different WLC?
#type 9 is not good.
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
#Does your dhcp server getting hits.
#Also, get debug dhcp message & packet.
#Dhcp server is not responding.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.

Station is not receiving an IP address from DHCP

Hello guys,
I have an ASA 5505 functioning as a router to connect to the Internet. Also, it is my DHCP server for my clients, and APs. When I connect my laptop to the ASA, I get an IP address and able to configure my WLC. The APs also receives an IP address from the ASA. However, when I connect to the AP wirelessly as a wireless client, my laptop is not receiving an IP address from the DHCP which is my ASA.
Here is my topology:
[3602i]--------[ASA5505]--------[WLC2504]
Here is my ASA config for my clients:
interface Vlan12
description *** DEFAULT GATEWAY FOR Wi-Fi GUESTS
nameif GUESTS-if
security-level 100
ip address 10.2.12.1 255.255.255.0
dhcpd address 10.2.12.100-10.2.12.131 GUESTS-if
dhcpd dns 208.67.222.222 208.67.220.220 interface GUESTS-if
dhcpd lease 1048575 interface GUESTS-if
dhcpd option 3 ip 10.2.12.1 interface GUESTS-if
dhcpd enable GUESTS-if
Here is the WLC interface config:

Hello jsnyder81,
I have another question. This is still related to the same network.
I am able to connect to the wireless network now, and receiving IP address from the ASA 5505; however, I can only ping my wireless gateway. I also don't have access to the Internet.
When I hard wired my laptop to the ASA's switch port, I am able to browse the Internet, but not via WiFi.
Here is the routing table that I have on the ASA:
Gateway of last resort is 192.168.1.1 to network 0.0.0.0
C    10.2.8.0 255.255.255.0 is directly connected, PRINTERS-if
C    10.2.9.0 255.255.255.0 is directly connected, FIOS-if
C    10.2.10.0 255.255.255.0 is directly connected, IP-CAMERAS-if
C    10.2.11.0 255.255.255.0 is directly connected, WiFi-USERS-if
C    10.2.12.0 255.255.255.0 is directly connected, GUESTS-if
C    10.2.13.0 255.255.255.0 is directly connected, WIRED-if
C    10.2.3.0 255.255.255.0 is directly connected, EXSi-if
C    10.2.4.0 255.255.255.0 is directly connected, AD/NPS/CA-if
C    10.2.5.0 255.255.255.0 is directly connected, inside
C    10.2.6.0 255.255.255.0 is directly connected, WLC-if
C    10.2.7.0 255.255.255.0 is directly connected, AP-if
C    10.2.20.0 255.255.255.0 is directly connected, WIRELESS-PILOT-if
C    10.2.21.0 255.255.255.0 is directly connected, WIRED-PILOT-if
C    10.2.22.0 255.255.255.0 is directly connected, SERVERS-PILOT-if
C    192.168.1.0 255.255.255.0 is directly connected, outside
d*   0.0.0.0 0.0.0.0 [1/0] via 192.168.1.1, outside
I also have this command:
same-security-traffic permit inter-interface

After upgrading to Lion from Snow Leopard, mail server does not receive incoming email

After upgrading my server last night [2011.07.20] from Snow Leopard to Lion, my mail server settings went belly up. After toying around with the server, its certificates and what-not, I was able to get it running, but it is no longer receiving any emails [neither internally nor from Gmail, Yahoo, etc.].
I can send emails via SMTP just fine [using SSL] to external email accounts [and it doesn't complain when I address an email to an internal email account, but I can't verify that it's sending it to the internal email account because it won't receive!].
The Connection Doctor says that it is indeed connecting properly to the server [incoming = IMAP, outgoing = SMTP], so there is communication between Mail 5.0 [and also Thunderbird as well] and the mail server. The problem appears to be the mail server not receiving any emails - from internal or external addresses.
Anyone else having this problem or know of a fix for it?
Thanks!

Did you find a solution to this issue? My mail server is doing the same thing. I've tried six migrations now, and have a couple of tickets open, but they all have issues. I have worked around all of them except the mail server problem.
I did some more digging; the problem appears to be that on a migrated server, it leaves all of your mail store in the old location, doesn't move it, and then doesn't appear to upgrade spam-assassin properly. The net effect is that the mail server gets the SMTP communication, tries to pass the message into spam assassin, and then it goes south.
I see errors like this littered in the logs:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed:
Jul 31 13:53:10 mail org.amavis.amavisd[5927]: bayes: cannot open bayes databases /var/amavis/.spamassassin/bayes_* R/O: tie failed: No such file or directory
Do you see anything similar?

Mac Mail sends but does not receive

Hi
Big problem!
Just upgraded to Lion - and this problem was on Snow Leopard too - I tried to upgrade to sort this out!
Mail sends emails but does not recieve.
I own the server where it is trying to connect to - the emails are there - I can see them through webmail.
I have set up different email accounts on Mail and exactly the same for all domains and email accounts.
I have re-installed Mail - exactly the same happens.
I have used Thunderbird and it works!
So it has to be a Mail problem. Server is fine, OS is fine, other email is fine. Mail is the problem.
I think it has to do with keychain? Not sure though... I have tried literally hundreds of things but nothing works and I am at my wits end and run out of ideas!
Any suggestions would be warmly received!!
Thanks in advance
Rob

Hi,
I have the same problem with my incoming mail. I talked to the folks at Frontier (my ISP). They verified that a
test message I had sent was received. All account info appeared to be ok. I click on "get mail" and I do not
receive any new incoming messages. All connections succeed Using Connection Doctor, although the connection to smtp.frontiernet.net spins quite awhile before succeeding.
While I was composing this reply, I decided to try to send a test message to my wife's account. It came
through ok. I think I might have to contact Frontier again on this. When I set her account up they gave me a
different Incoming Mail Server name to use: pop3.frontier.com, whereas mine is: pop3.frontiernet.net. I believe
new accounts are being assigned to: pop3.frontier.com.
Also, when I'm showing all inboxes, Mine all have a symbol after them that looks like a lazy z. I am not familiar
with this symbol, but since I'm having trouble, I suspect it is telling me something. Help on this??

Does not received reset apple password from my email?

I try form reset password but i input my email dantruong460@gmail (this is my apple id)
But login to gmail does not received anything to reset password from apple?

you might have a rescue email on the account.. try looking in all the email accounts you own

HT1918 Cannot remember password or security question. Email password reset does not come to email address. What can I do?

I have lost my passwrod for Itunes account. I do not remember answer to security questions, choosing email reset instructions does not come to email my account (checked Spam folder already). My teenage daughter setup information and cannot find it.
What can I do.

As I stated before, cannot access reset password without the answer to security questions and email is not showing up.
If all you can offer is "contact support" or add a link to reset password, please do not bother with a reply.
Was hoping someone could read the entire problem and offer something besides the obvious "contact support" which is totally useless without security question answers or email reset instructions which, as stated, are not coming to my email address.

When I click on my mail button it does not update my email. Any suggestions on how to fix. This

My email does not update when I click on it. How do I fix this

Quit the mail app then reset your iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
Also, when looking at the list of your emails that have already been delivered tap and pull down on that list then let go. This asked the Mail app to check again.

Mail sends but does not receive

Since 10.6.2 I've twice had incidents of my SBC account going gray and not receiving mail. Problem exists on iMac, MacBook, and iPhone so it is not a machine problem unless all three have had settings corrupted via mobileMe. Mail present on ISP server. Send works. First incident cleared spontaneously but current incident persists. Preferences settings appear to be correct on all three devices. Authentication is by password. Port is 995. Ideas?

These sporadic losses of connections to the server are not new with Snow Leopard. I've had them more frequently in the past and the only way I've been able to deal with them is to tell Mail to check/reconnect again.

Outlook 2010 / 2013 Send on Behalf of does not cache Resolved email address in the From Dropdown

This is insane Microsoft. Makes me wonder if you use your own product
Office 2013 / Exchange 2010
- Proper mail box permission
- Proper Send On Behalf of Permission
1. Open A Message > Select From > Choose Other Address > Choose From Again > Pick the Address (Which Resolves from GAL) Finish the Message and Send - No Problem
2. Start Another Message > Click the From drop down and the email is cached in unresolved SMTP format
"You do not have the permission to send the message on behalf of the specified user"
A Better message would be "Sorry Microsoft doesn't understand how to read it's own address book, properly cache an exchange email address and thinks 4 click is better than 1"
Sorry for the rant but if any one has a solution to this it would be much appreciated.
Notes:
- CTRL-K or Check Names Doesn't Resolve the From field
- You can send repeated On Behalf of as long as you don't the From Drop-down.
- Changing Address book order doesn't work
- Using Contacts as the Primary Address book doesn't work
- No Shortcut Quick Key to open "Open Send From Other-Email Address Programmatically" form
- Cant Use Quick Steps because From Field is not included
For those of you who hate rants without a solution, Here it is beyond ridiculous!
1. Make the Developer Tab Visible
2. Add the following VBA Code to ThisOutlookSession
Sub CreateNewMessage()
Dim objMsg As MailItem
Dim obj
Set objMsg = Application.CreateItem(olMailItem)
With objMsg
'.SentOnBehalfOfName = "[email protected]" DOESNT WORK BECAUSE EXCHANGE DOESNT RESOLVE
.SentOnBehalfOfName = "USE THE DISPLAY NAME"
.To = ""
.CC = ""
.BCC = ""
.Subject = ""
.Categories = "Test"
.VotingOptions = "Yes;No;Maybe;"
.BodyFormat = olFormatHTML
.Importance = olImportanceNormal
.Sensitivity = olNormal
' Calculate a date using DateAdd or enter an explicit date
' .ExpiryTime = DateAdd("m", 6, Now) '6 months from now
' .DeferredDeliveryTime = #8/1/2012 6:00:00 PM#
.Display
End With
Set objMsg = Nothing
End Sub
3. Customize the Ribbon
- Create A New Group
- Position New Group As Desired
- Choose Commands From (Select Macros)
- Drag Macros to Group
- Change Display Name and Choose Icon (Under Rename)
4. Hide The Developer Tab

I did some more digging and I solved it.
This would be the solution:
In Active Directory Users and Computers
-Click on VIEW
-Click on ADVANCE FEATURES (this is important otherwise you won't see
the complete list in the next steps)
-Click on the USERS container
-Find the problem user's account
-Right mouse the account and click on PROPERTIES
-Click on the SECURITY tab
-In the top box, click on the SELF account
-In the bottom portion of the screen make sure the READ PERSONAL
INFORMATION & WRITE PERSONAL INFORMATION should both be checked for
ALLOW
If you can compare the permissions for 'SELF' with another user you probably should set them accordingly to be safe. I noticed that for the user where setting delegates (SOB) did
not work, more than those 2 permissions were missing.
Good luck!
David

HT203128 I am not receiving my email address verification letter.

I am not receiving my letter for me email verification.

Hi Tom Wakeling,
Thank you for using Apple Support Communities.
If you have not yet received your Apple ID verification email, please take a look at the article below for troubleshooting steps.
If you didn't receive your Apple ID verification or reset email - Apple Support
Cheers,
Alex H.

Passport does not auto complete email addresses

when typing email address, the old BB used to suggest and auto complete email addresses. Now when i start typing an email address it shows a button "LOOK UP ..." then it shows the list of possible matches once i press the button. what do i need to change to make it do matches automatically without the need for the button push.
I have seen alot of people complain about this but no solution.

Auto complete and the suggestion are two separte functions.
With the contacts in my contacts app there is no issue with me doing either.
Possible you have the email address in a different contact field?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Hi! I have a problem of my ipad, it does not receiving an email, will you please,help me to walk to through, please.

do you want me to use my ipad right now, because I am using my regular computer.

I did set up my e-mail address,but i cannot get the email.

Mail 3.5 will not grab all email messages from servers

I may be missing a setting somewhere, but I'm pretty sure I've looked at most everything. When I launch Mail, I currently have a Hotmail Mailbox and a Gmail Mailbox. Neither are functioning 100%. Both have only downloaded a portion of the messages available on the server. The Hotmail account (POP) has downloaded only 140 message, but when it "checks for new mail" it shows it is downloading message 466 out of 466, with 0KB left to go. Gmail has downloaded only 107. I don't know what the total number of email messages is in my gmail account, but it far exceeds 107. What is very annoying is that the Hotmail account is only downloading the oldest messages, as opposed to the newest like Gmail did. I have moved the MessageUidsAlreadyDownloaded3 from the Mail library folder and restarted Mail, but to no effect. Any ideas?

After much searching around and trying different approaches, I finally solved my issue. I ran the combo 10.5.6 updater, and this solved the issue. Prior to running the combo updater, when I repaired permissions several things could not be repaired. After the combo updater, everything works fine, and permissions are fine as well.
My mail issue happened after I updated Quicktime, fyi.

Mail 4.5 does not receive 2 email addresses from friends

Similar Messages

Maybe you are looking for