Mail 4.5 Quirk(s) - Now unable to drag email address to Search

I've been going through printer issues since updating to Snow Leopard, and am just now getting a chance to address other issues.  This one is driving me nuts and didn't seem to find anyone else posting about it (or just didn't get the right search terms!).  But when I have an email up, and I try to drag the sender's email address up to the Search window in Mail (to look for other emails from the same address), since the update to SL am no longer able to do that.  It will not drop into the Search window.
Another quirk that I'm having, less frustrating but it's there nonetheless is that when I've tried to copy and paste an email address into the Search window, I no longer get just the email address.  I mean, you have in many/most email addresses the person's name and then the actual email address inside of the brackets -- and when you click on the email address and then select Copy Address and then paste into the Search window, now I get the stuff outside the brackets as well.  And Mail will not properly search the email address until I manually delete the brackets and the extra name info, leaving just the email address itself.
I'm not the only one seeing these quirks am I???

I went to the local Apple store earlier this week and asked on of the folks at the Genius Bar if he knew how to set the outgoing mail address. He showed me that I could enable the "reply to" field and then put my mail forwarding address into that field. Unfortunately, there is no easy way to pre-populate that field so that it always has my mail forwarding account address.

Similar Messages

  • My email account was hacked. Had to change email password, now unable to send email from my ipad

    My email account was hacked. Had to change email password, now unable to send email from my ipad. I am such a novice technically, and have no clue what to do. Please help!

    Hi Skiddishchloe,
    I'm sorry to hear you are having issues with your email account and your iPad. If you are having issues sending mail from your iPad after changing your email password, you may find the information and troubleshooting steps outlined in the following article helpful:
    Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
    Sincerely,
    - Brenden

  • Following trip to Maldives, now unable to receive emails

    Following trip to Maldives, where only  change made was to connect to rooms wifi, now unable to download emails under wifi or cellular

    Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • Mail.app 6.0 - reply all now cc's my email address - fix?

    I just upgraded to Mountain Lion last night. I started using Mail and now anytime I reply all it copies my email address.
    Under the composing preference tab, the Automatically cc myself option is UNCHECKED.
    Any help would be much appreciated.

    Same problem here. I also have "Automatically cc myself UNCHECKED.

  • ARRRRGH! Apple Mail is now using the wrong email address by default

    ...unless I pick one specifically in it's prefs. What the **** could be
    causing this? It just started happening today. Shouldn't it be using the
    address of account I was last in? Instead it's using the last address
    entered in the email address field in Account prefs.
    *swears long and loudly* I've been sending email all day using the wrong
    effing address!
    Mail is also still continuing to remove a line after I paste text - some
    of the time. It's always nice to never know whether I'll need to fix
    things after pasting. Keeps me on my toes...

    I suggest you play with the Send new mail from setting and see if it makes any difference. The feature works OK for me, so I think there's something funky with your Mail settings.

  • Unable to set email address for user MySite in SharePoint2013

    Hi,
    I've a SharePoint Ent farm with a MySite Host Site Collection created. Under that, I've got some users having their own MySites.
    Now, the problem is, I'm unable to get the link for editing the user's email address after logging in to the MySite under the credentials of the particular user. 
    Can anybody please suggest. Is this field at all editable?
    Thanks,
    Arnab

    Hi John,
    Elaborating...
    I've created a MySite Host Site Collection programmatically, say, http://test.mysitehost.local/.
    Under the same I'm creating user mysites (through SharePoint2013 Object model), say, http://test.mysitehost.local/personal/user1. (for my case "personal" is the managed path). While creating the user mysites, I'm not passing any value for the email
    address of the user. 
    Now, my question is, can I set the email address of the user from MS native portal or through powershell?
    Please note, I'm using SharePoint2013 Server.
    Thanks in advance,
    Arnab

  • Unable to Verify Email Address

    Hello,
    I recently bought my daughter an ipod touch and set it all up and it was working fine with her email address. Unfortunately, we had to exchange it as it developed a fault. I am now in the process of trying to setup facetime and IM but when I enter her email address it says 'unable to verify email because it is already in use'. I have tried to troubleshoot this through the communities on here but the only information I can get relates to having more than one apple id which I don't. My daughter is too young to have her own so we use mine. I never had this issue when I had to reset my ipod.
    Any help would be much appreciated.
    Lara

    Hi IIIaass,
    Yes, I have tried this but I only have one apple id so this doesn't aply to me. I checked my account details and this email wasn't veerified. I clicked on the 'verify now' action but nothing happened. I did chec the 2 emails linked to this id and the spam folders but there was no verification email in any of them. I also tried deleting the email from my account and re-adding it but this didn't work either. I'm stumped!

  • WAP + AD FS Integration - Unable to get Email Address

    We integrated our tenant portal to authenticate using AD FS which is working fine. The only issue i am having is that when i query Microsoft.MgmtSvc.Store database to see the users, i do not see their Email address. I see their UPN being populated in the
    Name field but email address is NULL.
    SELECT *
    FROM [Microsoft.MgmtSvc.Store].[mp].[Users]
    Am i missing something in the configuration?
    Can someone who has AD FS integrated with WAP please set up check their database?

    Hi,
    I do see in my setup also the UPN, only thing I did is on the OU of the company I configured the uPNSuffixes attribute  to match my mail domain:
    Best regards, Mark Scholman. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • SU3 Users unable to change email address...

    We are currently using CUA and I have allowed users to modify all profile information including the Internet Mail setting in SCUM; however, when we go to maintain own data (SU3) the email address cannot be modified????  I have searched all over for information regarding this and there seems to be nothing available.  Does anyone know anything about this?  How can I enable my users to change their email address when necesssary?

    > Does anyone know anything about this? 
    See [SAP Note 136186|https://service.sap.com/sap/support/notes/136186]. The ability to maintain this for your own user is intended for transaction SU3 anymore. It does not work with SAP_ALL either.
    > How can I enable my users to change their email address when necesssary?
    Either the administrator (or equivalent) should maintain this, or you will need to write your own little application which makes it possible for a user to maintain their own address only (and possibly do some validations on it - such as the address not already being in use, and from the correct domain, etc).
    Cheers,
    Julius

  • IMessage/Facetime unable to verify email address.

    I recently updated to the new iOS 5 on my iPod Touch 4G, and when trying to sign in to either Facetime or iMessage it gives me this message for one of my apple IDs: "Unable to verify address. An email with a verification has been sent to the above email address." No email has been received so far.
    For my other Apple ID, it says "Unable to verify address because it is already in use". My two Apple IDs have their own email address, and I use both to shop on iTunes, so I have no idea what the problem is.
    Any help would be greatly appreciated. This is gettint frustrating.

    I'm having the same problem.  I sign into iMessage on my iPad, then continue to verify that main email, but it fails.  I have checked on the site below to see that it has already been verified.  Same deal with FaceTime.  Tried rebooting iPad, same issue.
    TIP: you can use the site below to view your account and resend validation emails.  But for me, even the validated ones are not being accepted.  Maybe that server is down?
    My Apple ID website:
    Appleid.apple.com

  • Unable to verify email address for apple id set up

    I'm getting this response when trying ti set up an Apple Id. I was sent the email to verify the email address and then thisis what I get:
    Invalid URL
    The requested URL "/cgi-bin/verify.cgi?language=US-EN&key=ODJhYTFlMjA3OTY2MWM2MWM2NGUwNWQzM2ViOTU 4NGQ4NDMzZTA3ODhhMjE3ZGI5YmJiY2QyOTY0M2I0ZWQ3NWYzNGViYzMzY2NjNmUxZTQyYjhjYWI3MDF kNTRlZDAxOTBjZDA3NjM2ZjI3ZmNkZWEzMDVmNzE2ZjI1YjU5MzRmYzkzZTcxMTYzNWNlMWJlOWI5OGF jMjk1NmY4ZTZjMzZhNGYyYmNjODE4OWI1MjkzMzY4OWEwZjUxMDAzMzlmZGFjMDA2MzkzYjdjNWY0NjY wNzAwNjQ1ZTMxMzJmYjFhZjRiNDQxOThlNjlkMzEyZmZhODMyYjM0MWQ5YjQ2MQ==", is invalid.
    Reference #9.83ed54b8.1359560039.b64f39e

    The verification email is only valid for a limited time for security.
    Put in a request for another verification e-mail to be sent to you.
    Start here, change your country if necessary and go to manage your account

  • Mail 5.3 not getting (or blocking) a certain email address

    For no specific reason, from july 30 2014, I stopped receiving emails from one of my colleague. Her address is an @yahoo.com address. I tested my own @yahoo.com address and everything is fine. I didn't do anything special to her address, no rule, no nothing. Mail 5.3 and my iPhone too, both stopped receiving whatever she would send me.
    On her side, it says that everything is actually sent and nothing is bouncing back to her.
    I really don't get that one. Can someone help me please?
    Jonathan
    My computer is running OS X LION

    benmiller1987 wrote:
    I have just checked BTCONNECT webmail and no junk mail folder. I am using Outlook for my email account. At the sending end it says sent messages and they think it could be BT's end. Most people on my mailing list are receiving the emails I am sending it is sending from [email protected] as that is where the mailing lists go through as such, but I am not and other BT email accounts.
    Hi again.
    Is this a business account, and does it affect sending to @btconnect.com and @btinternet.com email addresses ?
    Even though the "system" says sent, it doesn't actually mean that the mail servers have actually managed to send. When you say "they think if could be BT's end" - have they checked their systems thoroughly ?
    Some mailing list systems are notorious for being treated as spam sending systems, and the emails could actually be prevented entering end user ISPs altogether by higher order anti-spam filters, such as Spamhaus etc. The end user would then not even see them in their online Spam folder.
    If all other emails are being received as expected, then it seems to point at the originating end - even if users on other non BT ISPs are receiving those emails.
    http://www.andyweb.co.uk/shortcuts
    http://www.andyweb.co.uk/pictures

  • Having downloaded Mavericks now unable to drag and drop contacts into the to column of mail

    After downloading Mavericks I can not drag contacts from my addreass book to the message. I also find that iphoto has been locked out and not able to seek pemissions to enter my photos. Can any one help

    Finally figured it out. Podcasts in your Podcast folder aren't actually there (they're just "available") until you download them by clicking on the down arrow to the right of the name. Once you click on the down arrow the podcast will download to your computer and a blue dot will appear to the left of the name. You should now be able to move the podcast to your other i-devices.

  • TS3899 Since download of ios7.0.4ipad and iPhone don't sync hotmail account. I have un installed email account on both devices still not syncing also now unable to view email folders

    Since I downloaded iOS 7.0.4 onto iPad and iPhone hotmail account won't sync. I have un installed the hotmail account on both and reinstalled. Still won't sync and now cannot view email folders

    When you reinstall, set it up as an Outlook account instead of "other". Everything synced when I did that.

  • I have just updated Photoshop Elements from 12.0 to 12.1 and I am now unable to drag layers from one file and drop them into another. Help!

    I was able to do this until I updated. I need help fast as I need this feature to complete daily tasks for my job. I've come to a halt with my work because of this.
    I have the two files open as shown below. I'm trying to insert the image in the file on the left to the file on the right but when I drag to drop into the file, it doesn't happen.
    The cursor indicates it has picked up the image but it doesn't indicate that it can't be dropped, it just doesn't work. Help!!

    Given that you're on XP, we'd better try the following document:
    iTunes displays -50 error message when syncing iPod on Windows XP

Maybe you are looking for

  • Problem with a CKF in query

    Hi all, I have a calculated key figure which gets %GT of 'Amount'.Now the problem is when i execute the query it is getting displayed as 'X' instead of some value.When i filtered by some values of G/L account(in the output screen) the CKF is displaye

  • Sort formula format

    Hi, I need help on system action "Sort rows". What format the field "sort formula" has? Edited by: Eugene Balakhonov on Apr 15, 2008 3:17 PM

  • Help needed in shell script for FTPS

    Hi, Im trying to build a script to download files from a secure FTP site. When I run the command ftps <host_address> in the unix prompt, it asks username and password, and then prompts the following question. Do you want to trust this certificate? y(

  • E-mailing as PDF rather than Word

    Hello All - We accidentally changed our settings so that when we click the e-mail icon on the top menu it defaults to a Word Document being e-mailed rather than a PDF.  How can we change this back so the default is PDF? Please advise! Thanks, Mike

  • KT6V-LSR problems

    first sorry for my bad english... im from mexico i buy this motherboard, but from the beginning I had problems... was restarted a lot... was not temperature problem, because all the components had used them in another motherboard and it always worked