Mail 4 Exchange should allow Access Groups

It's a shame the Mail for Exchange Connection menu requires an Access Point setting - and doesn't allow the selection of an Access Group.
I have an Access Group set-up where my WLAN is used, but when I leave the office, the 2nd preference is a 3G/UMTS data connection.
I should be able to sync with my Exchange server in the office, and when I leave, maintain the connection without any user intervention required (by auto-switching to UMTS)
It would seem so simple, but unfortunately it's not supported. Hopefully someone from Nokia is watching....

Don't know what kind of phone but I assume an E series. Try downloading Smart Roaming (go to "Catalog" on the phone). THen configure smart roaming to be your wifi and then gprs. Then configure mail 4 exchange to use smart roaming as its access point. Works well.

Similar Messages

Mail for Exchange and allowed models of phone

Could somebody tell me why my Nokia 6120 classic is not allowed to use Mail for Exchange tool. From my point of view there is some stupid marketing policy. As a result the policy just makes me to use third party software on my phone such as Roadsync.
Roadsync soft is working perfectly but why I have no ability to use native software from Nokia. It's some strange situation.

What do you mean? Is there some hardware or software problem which makes my phone incompatible with Mail for Exchange? I think the problem is just software stub which is purposely embedded into Mail for Exchange code in order to disable the tool on my model of phone.
I would like just to remind you that Roadsync is working properly on my phone.
Roadsync and Mail for Exchange use the same scheme of data synchronizing (Microsoft ActiveSync protocol)

Nokia N8 Belle - Mail for exchange only allows man...

Hi. The problem is fully described in the title. I already was abroad in last July and when i came back it was all OK. On the contrary now I can't change synchronizing times -phone says "Only manual synchronization when in roaming" or something like so. (I am NOT in roaming now.)
Thank you for all your help.
Solved!
Go to Solution.

cavour1980 wrote:
Hi. The problem is fully described in the title. I already was abroad in last July and when i came back it was all OK. On the contrary now I can't change synchronizing times -phone says "Only manual synchronization when in roaming" or something like so. (I am NOT in roaming now.)
Thank you for all your help.
Is your network operator a virtual network operator or have you just ported to one?
What's the setting in Menu > Settings > Connectivity > Settings > Allow mobile data usage? Is it 'Home country/region'?

E71 Access Point Choice Mail for Exchange

I am used to using the iPhone where whenever you go somewhere, the phone detects available networks and you choose the one you want to connect to. I don't understand why in Mail for Exchange you must define an access point. Is there a way to have the access point selected whenever you enter a new area? And when there is no wireless network available, should it automatically use the GPRS network?
Thank you.

I would have to agree with you on that, it's my one and only complaint about the current S60 software.. Just about all other plaforms offer this function and Nokia used to with connection groups.

FF 5 running on windows 7 has suddenly stopped allowing access to comcast mail, but this is not a problem under Snow Leopard

I am running the latest version of firefox on a windows 7 laptop and Mac desktop. The windows version was allowing access to comcast email until it suddenly stopped. It won't let me open any email on the summary page or view the entire inbox. Opening firefox in safe mode does not eliminate the problem. I have no problem accessing comcast mail on the MAC or with Chrome, Safari or IE on the laptop.

Hi Steve1904,
So you have use the backup and Restore to restore your files from Windows XP to Windows 7 directly?
This should be considered not work.
If you would like to transfer files between Windows XP and Windows 7, you need another tool called Windows Easy Transfer.
See the article below if you would like to upgrade from Windows XP to Windows 7:
Upgrading from Windows XP to Windows 7
If possible, follow the steps there, then things should be OK.
Best regards
Michael Shao
TechNet Community Support

Mail for Exchange - Access Point question

Hello,
When setting up Mail for Exchange, you need to input the Access Point. I cannot find an option to select "Ask for Access Point" or something along that line.
I use wireless access points and when I go from one spot to another I have to change my settings just to sync.
Does anyone know of an option, if not how could I file for a feature request?

The specific problem can be resolved. How did you hard reset your phone? You should hard reset your phone (some key combination which I cannot remember, press four keys simultaneously). Then format mass memory. Reinstall the firmware. Otherwise let Nokia Care reflash your phone. I had issues with freezes when I hung up a call, but that was resolved when Nokia Care reflashed my phone.
My phone is currently broken, so I cannot help you further.
Erik

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

No new mail notification in Outlook - CAS Exchange RPC Client Access problem

Hi, we're facing this problem:
Users start complaining they suddenly don’t receive new mail notifications in Outlook (2010/2013) anymore
Inbox does not show the new mail either
When the user changes folders in outlook, the new mail does show in the Inbox folder
Restarting Outlook shows the new mail as well.
The same new e-mail arrives instantly (with notifications) in Owa and on mobile devices
Sometimes the new mail notification pops up after a longer period of time (from 30 seconds to 10 minutes). But more often not at all.
This issue seems to occur at random. We’ve been problem free for a week, and sometimes it comes back three times a day.
Clients running Outlook 2010, 2013 cached or online, on site and off site. So it seems server related, not client.
It was seen first around January 8th. We did not make any changes around that time that we can link to this problem.
Only one CAS server (EXCH1-RTD) shows this issue. CAS servers on other sites are ok
EXCH1-RTD has CAS and HUB transport roles. The same site has two mailbox only servers. EXCH2-RTD (mailbox server for normal mailboxes). And EXCH3-RTD (mailbox server for archive mailboxes)
No entries in the event logs that seems to be related
As the problem only occurs with Outlook clients, I suspected RPC issues. We cannot gracefully stop the “Microsoft Exchange RPC Client Access” service on EXCH1-RTD while the issue occurs. We
can only kill the process and restart the service, solving the issue instantly.
What we’ve tried until now:
Updated all Exchange servers from Exchange 2010 SP3 RU6 to RU8-v2 (server OS=W2K8R2)
Updated all Exchange servers to latest critical Windows updates
Recalculated requirements using MS Sizing tool. Upgraded EXCH1-RTD VM from 8GB and 2 vCPU (1 core/cpu) to 16GB
and 4vCPU (1 core/cpu)
Ran various perfmon counters and compared them with other Exchange servers, not finding any obvious anomalies.
Any ideas would be greatly appreciated!
Ron

Hi Ron,
From your description, OWA works well, the issue is related to Outlook side. In your case, I recommend you use Outlook safe mode to determine whether the issue is related to add-ins. If the issue persists, you can create a new profile to check the result.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

TS2972 I assume my Apple TV should allow me to view all events,albums and slideshows but It only allows four events to display on my TV. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer? Ch

I assume my Apple TV should allow me to view all events, albums and slideshows in my iPhotos app but it only allows four events and four albums to display on my television. I'm using a Optus mini Wi Fi for my home network. Could this be the reason for limited access via my iMac computer?
Chris

No, I have not chosen photos to share as I assumed that the Apple TV would access all photos and music that are stored on my iMac.
Thanks for your advice. I will check it out.
Chris

Rule to apply ldap group filter to allow access in OAM Policy Manager

This may be pretty basic, but I'm trying to implement a rule in Policy Manager to allow access to a resource based on LDAP group membership. I can't figure out how to construct the ldap query. I'm using OID as the directory server.
Does anybody know how to create an ldap query that will apply a group filter to authenticated?
the format would be something like
ldap:///dc=oracle,dc=com??sub?(......)
thanks for any help!

Mark,
Do you by any chance know what we can include in our DBMS_LDAP statement to populate the OID for a new user creation to populate the obpasswordcreationdate as a part of the user creation.
Here is what are running but since we moved to OBLIX, we don't know how to populate a new user?
Here is part of our code using MOD_ADD.
emp_vals(7) := null;
DBMS_LDAP.populate_mod_array(emp_array,DBMS_LDAP.MOD_ADD,'obpasswordcreationdate',emp_vals);
emp_vals(1) := 'top';
emp_vals(2) := 'person';
emp_vals(3) := 'organizationalPerson';
emp_vals(4) := 'inetOrgPerson';
emp_vals(5) := 'orcluser';
emp_vals(6) := 'orcluserv2';
emp_vals(7) := 'oblixPersonPwdPolicy';
After it runs, it send me an error no data found.
Thx so much in advance. Not getting any answers.
KA

Mail for Exchange Thumbnail Support

Dear MFE team,
Exchange 2007 stores the contact's thumbnail image on the server (confirmed, as I can access it from OWA and see the thumbnail).
Can it be possible to download the thumbnails for contacts when synchronising OTA to Exchange? Given that most people only want to enter data once, having the main repository for such things in Exchange and not on the handset is probably the best option.
Thanks,
Dane
Proud E71-1 owner (yeah!)

Hi,
I'm also running sbs 2003, and i have managed to get mail for exchange to work properly.
i'm not sure me the exact setting to do with the certificates, but there are plenty of posts about this.
sbs 2003 basically doesn't produce certificates in a recognised format. To solve this problem you need to go to the control panel, add/remove programs, windows components, and add the certificate manager (may not be the exact name), this will allow you to create the correct type me certificate for the phone to recognise.
copy this new certificate to the phone and it should work find.
Dave -
Phones:3110,5110,6110,6210,6310,6310i,8210,8250,8310,6230,6230i,6280,E60,E65, 5800, N900
and: 7110,6250,6220,6111,7370 (but just for a few months)

Deleting Mail For Exchange Account from Symbian^3

Since buying my C7, I have been playing with the email settings to try and set up the correct account information that works best for my phone. In doing so I have tried both imap and mail for exchange. In the end I plumped for GMAIL imap and deleted all other accounts. Recently I have needed to set up a mail for exchange account again and when I tried to create a new account it confirmed that I could only set up one such account and that I should delete the other.
I looked at my account list but there was only my IMAP Gmail account. I tried switching the phone off and then on again and the email app then confirmed that there was a mail for exchange account. When I tried to view the account settings or make changes it confirmed that it was not possible to access the account at this time.
I tried deleting the account but although it lets me do this, when I try to add a new mail for exchange account I get the same message as per above and the account is recreated when I next switch off / on?
Does anyone know how I can resolve this......or will I need to factory reset?
Solved!
Go to Solution.

I have managed to sort this now. Obviously one of my previous mail for exchange settings had become corrupted and could then not be updated. To fix the problem I downloaded the Nokia configurator tool (available on the downloads section of this site) and got it to read my settings on the phone. I then unticked everything apart from the mail for exchange settings and manually entered them in the tool. I then sent these settings back to the phone and rebooted the phone. The mail for exchange account then appeared although strangely none of the settings I entered had been sent, but I could then edit the account and get it working. I then deleted the account again on the phone and this completed successfully and would allow me to re-add......phew.
I just need PR1.2 so that I can use mail for exchange lol.

Mail For Exchange - Compatability/Downloads menu i...

Using N79
SW 31.002.205.4.
Up until this morning running MfE 2.9.158. Just been offerred 2.9.160 via App.Update. Post install check indicates this has been available for months - why the delay in pushing it through to App.Update?
MfE 2.9.160 still not fixed old issue of being unable to open MfE settings following phone restart - why not? - threads dating back to 1st quarter 2009! but this one explains the issue precisely:
/t5/Messaging-Email-and-Browsing/Mail-for-Exchange-corrupted/m-p/603626/highlight/true#M21922
It's the only app on my phone that cannot be routinely opened - not good.
Notwithstanding this idiosyncrasy email syncing is more hit than miss but falls way short of my iPod touch which is 100% rock solid regarding Exchange compatability. Does Nokia want Exchange Server based customers- my guess is not enough. Generally speaking if I notice emails hitting my iPod but not my N79 it's time for a phone restart. But that kills the ability to open MfE settings So it's back to a re-install.
If the above isn't bad enough Nokia has just made it worse. This "current" link from the N79 support page is dead;
http://businesssoftware.nokia.com/mail_for_exchange_downloads.php
and after much dead-ending find that the Ovi Store now contains MfE - no problem with that it makes sense to consolidate. But no mention of N79 being supported by the latest greatest MfE and Ovi only lists 3.0 as supporting FP1 phones - so wht about FP2?
Is my N series phone supported anymore - I've got no idea.
Wake up Nokia it's 2010 not 1990 - we shouldn't have to put up with this **bleep** in basic functionality.
Judging by lack of action over the past 12 months have no hope Nokia will put this right but that my dear Nokia is how you lose customers to your rivals Apple and RIM. Pull your finger out.

I'm hoping this fix works for me long term and post as is.
Multiple phone calls to Nokia Tier 1 and 2 phone support heavily supplemented by some determined Google searching led me to the following solution.
First off the bad news. To fix the MfE issue requires a hard reset of the device. There's no way around this so resign yourself to it early.
The good news however is you can dramatically reduce the time needed to return your device back to its pre-reset condition by backing up your device using Ovi Suite. Forget to do this and you'll be re-installing your apps one at a time.
My issue was made more difficult because the usual hard re-set code (*#7370 #) would not reset the device i.e. full recovery of phone memory, complete wiping of contacts etc. Ignoring Nokia's advice to return the phone for repair! I turned up an alternative method which achieved the hard re-set I was seeking.
As follows:
Hold these three keys down - *, 3 and green accept call - whie the phone is off, then power on keeping them depressed until the Nokia logo plays.
On the N79 this involves an usual amount of manual dexterity but nevertheless worked where the re-set code failed. Hopefully this won't be necessary for most users.
Once re-set you will be presented with the Set up menu as per a new phone.
With a fully recovered phone memory you can now restore your earlier backup via Ovi Suite, which for me did 90% of the work needed to get my phone back to its earlier personalised condition. I took the opportunity of checking for any programme updates of essential apps and updated as necessary. Re-installation of Speed Dial settings and permitted Bluetooth devices amongst other items was required but all in all all my data and file structure was faithfully restored first time around.
I am now running MfE 3.0 (actually 2.09.208 - see initial thread posting ) which Nokia support advise is not supported for the N79 - given the varying level of advice received I'm prepared to run with my own view that it works fine. If you wish to play safe you should be running 2.9.160.
I have re-booted the phone multiples times over the last two days and on only one occasion (which I'm going to pretend never happened) MfE has been rock solid. In addition Ovi Maps which had stopped opening - and was fundamentally what set me off down the road of a hard re-set - is now working perfectly.
I'm hoping this cures the irritating MfE problem long term pending Nokia sorting out whether they even support the N79 any longer as far as MfE is concerned.
As a sign off I will just say for my purposes the N79 is the best smartphone I've ever owned and supplemented with an iPod Touch is a fantastic work/play combination. If you are allowed tethering on your contract I contend Walking Hot Spot is THE killer app and so confident am I of my choice of phone I've just bought a second N79, at a much reduced price, which I'm going to use as a backup/extension to my existing N79 when it dies and goes to heaven.
Hope this post saves someone else some timeand effort.

How do I access group calendars on 10.8 server from a calendar client?

Hi,
I have a brand new installation of 10.8.2 . I installed the server app and started Calendar, Contacts, DNS, File Sharing, Mail, Open Directory and the Wiki services. I created a group with some users in it. I also created a group wiki and enabled the calendar for that wiki. The user group has r/w access to the wiki. The web interface to the wiki works from a client 10.8.2 client system. I can edit the group calendar through the web interface. I created an account in the Calendar application that connects to the server and shows the users' calendar. I altered the server path to /principals/__uids__/wiki-GROUPNAME/.
The calendar shown is still that for the user and not the one of the group. Hence my question: how do I access group calendars on a 10.8 server from the calendar application on a client?

yrmomsadic wrote:
Forgot to mention, you can techinically force it to work, but iCal breaks it for some unknow reason, taking it back to the users account after a day or two. The best work around has been to create a new user, named the group name, and then allow delegates to access the calendar. This however screws things up with the iphone calendar, as it didn't/doesn't handle delegates. Again, hoping Apple comes to their senses on this.
You can still delegated calendars on iOS, but the setup is a little tricky. You have to add an entirely new calendar account, and enter the full ugly url with the users uuid. It would be so nice if iOS just supported CalDav delegation.

Group differs on ... should be 80, group is 99.

Group differs on "+insert filename here+", should be 80, group is 99.
I get this sometimes while running disk utility. I don't think its a problem, but what does it mean. What are groups 80, 99, 0, etc. ?
Message was edited by: madking

nobody -2 nogroup -1
wheel 0 daemon 1
kmem 2 sys 3
tty 4 operator 5
mail 6 bin 7
procview 8 procmod 9
owner 10 everyone 12
group 16 staff 20
smmsp 25 _lp 26
_postfix 27 _postdrop 28
certusers 29 _keytabusers 30
utmp 45 authedusers 50
interactusers 51 netusers 52
consoleusers 53 _mcxalr 54
_pcastagent 55 _pcastserver 56
_serialnumberd 58 _devdocs 59
_sandbox 60 localaccounts 61
netaccounts 62 _mdnsresponder 65
_uucp 66 _ard 67
dialer 68 network 69
_www 70 _cvs 72
_svn 73 _mysql 74
_sshd 75 _qtss 76
_mailman 78 _appserverusr 79
admin 80 _appserveradm 81
_clamav 82 _amavisd 83
_jabber 84 _xgridcontroller 85
_xgridagent 86 _appowner 87
_windowserver 88 _spotlight 89
accessibility 90 _tokend 91
_securityagent 92 _calendar 93
_teamsserver 94 updatesharing 95
_installer 96 _atsserver 97
_lpadmin 98 _unknown 99
com.apple.sharepoint.group.1 101 _guest 201

Mail 4 Exchange should allow Access Groups

Similar Messages

Maybe you are looking for