Mail 5.2 (1278) with MS Exchange 2010

I've been working with Mac Mail for about a month on MS Exchange 2010 and found that it would not sync up nor would it close. I later discovered that if I removed ALL rules from Mail, that everything would work properly. I don't know if this is a bug or some quirk with Mail trying to sync its rules with Exchange and Exchange going nuts trying to understand them or what... Never the less, I'm back operational again because I deleted ALL of my rules, I just wish I had some way to automatically filter some of the repetitive emails I get.
Does anyone have visibility to this as being a known bug either on Apple's or Microsoft's side and whether there IS a fix or that either have this on their bug-list?
Thanks
Jim

William, it sounds like the same thing.
This is what I've seen happen in detail when I have rules set up:
When new mail arrives in my Exchange inbox, the won't show up in Mail.app sometimes for quite a while or possibly never.
When I do a "Get new messages in all accounts", it will endlessly spin and no mail will download. I check whats there by going to OWA and find that there are lots of mail in the inbox, just that Mail isn't able to download them.
If I try to quit Mail, I find that its just locked up and even tried waiting about 6 hours (I went away and came back late that evening) so I force quit the app. // Note, use the vacuum terminal command to clean up your mailboxes: "sqlite3 ~/Library/Mail/V2/MailData/Envelope\ Index vacuum;"
Only when I go back in to Rules and not just disable them but remove them entirely, that Mail begins to respond correctly and I'm able to download messages when they arrive.
Workaround:
What I've ended up doing is build Smart Mailboxes to search my inbox for certain criteria that I normally would have a rule set for and then perform the task manually. Its awkward but at least I get my mail.
I'm really hoping someone is aware of this and are working on it. I read somewhere that its a "known bug" by Apple and even with the early release AppleSeed of Mountain Lion, its still not fixed there either.
I wish I had better information - at least you have a handle on whats going on.

Similar Messages

Configure sharepoint 2013 with Microsoft exchange 2010

Hi,
I am want to configure SharePoint 2013 with Microsoft exchange 2010.
Please let me how can I integrate these server to Send/ Receive domain E-mails.
Thanks,
C Mahone

For email integration there really isn't anything special about Exchange 2010 vs. any other mail server. Check the links here on configuring Incoming and Outgoing mail in SharePoint:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Just updated to my macbook pro to 10.8.2. ical not synching with my Exchange 2010 server. Worked flawlessly prior to the upgrade. Settings set to auto discover. I matched settings of a partner in my who is still using 10.7.1 without issues. Help!

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

Force email download in HTML or text format on iPhone/iPad with ActiveSync (Exchange 2010 SP3)

Hi,
When an HTML email with attachment is received on iPhone/iPad (iOS 8.2),
it can be downloaded in three cases of
intermittents ways :
- The full message is downloaded in HTML format
- The message is download in text format and a
"Download full message" link is displayed
at the bottom of the message
- The message is displayed in text format,
but continues to download the rest of the message.
When the download is complete, the message is displayed
in HTML format.
This behavior is intermittent. The Apple's support
says it is a particular configuration on Exchange server
that causes this behavior.
I want to know if there is a way to fix
this problem and force download email
either in text or HTML format ?
This problem occurs on iPhones/iPad
(iOS8.2) with ActiveSync account (Exchange 2010
SP3). It occurs also with Outlook.com account.
On the Exchange 2010 SP3 server, The MaxEmailBodyTruncationSize
and MaxEmailHTMLBodyTruncationSize settings are
unlimited in ActiveSync policies.
Thank you for your help.

Hi,
We can configure Exchange ActiveSync Mailbox Policy Properties to force device download HTML or text format email.
Use the EMC to view or configure Exchange ActiveSync Mailbox Policy by the following steps:
In the console tree, navigate to Organization Configuration >
Client Access.
In the result pane, click the Exchange ActiveSync Mailbox Policies tab, and then select the policy you want to view or configure.
In the action pane, click Properties.
Under the Sync Settings tab, check or uncheck the box
Allow HTML-formatted e-mail. Select this check box to enable e-mail messages that are formatted in HTML to be synchronized to the mobile phone. If this check box isn't selected, all e-mail messages will be converted to plain text before synchronization.
And use this command to configure whether allow text messaging on the mobile phone. The Exchange Enterprise Client Access License is required to change the values of this setting.
Set-ActiveSyncMailboxPolicy -Identity PolicyName –AllowTextMessaging $True
For more information, please refer to this document.
https://technet.microsoft.com/en-us/library/bb123484(v=exchg.141).aspx
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Contact Corruption with Microsoft Exchange 2010

I currently have a client with a Sprint palm pre who has roughly 1500 contacts. I have set up his phone to sync directly with the exchange server over the air (This is the only account that is set up on the device) E-mail works fine, calendar and contacts appear to work fine, however it seems at random that the pre deletes certain pieces of information out of contacts (phone numbers being deleted, e-mail addresses having random erratic characters inserted, sometimes my client will enter a new contact and it will not sync at all, it doesn’t even show up on the device) He currently uses 3 separate PC’s 2 with outlook 2003, one with outlook 2007. There have not been any contact issues similar to this before the palm pre was synchronized with their new exchange server. The device has been hard wiped and re-synced (an arduously long process, the problem is still persisting. I have also checked for any software / firmware updates, everything looks to be the latest version available.
Post relates to: Pre p100eww (Sprint)

Important detail I missed. The client is running MS Exchange 2010. Is there a compatability list somewhere on palm's site?

[SOLVED] Can't add a node to the cluster with error (Exchange 2010 SP3 DAG Windows Server 2012)

Hi there!
I have a problem which makes me very angry already :)
I have two servers Exchange 2010 SP3 with MB role started on Windows Server 2012. I decided to create a DAG.
I have created the prestaged AD object for the cluster called msc-co-exc-01c, assigned necessary permissions and disabled it. Allowed through the Windows Firewall traffic between nodes and prepared the File Share Witness server.
Then I have tried to add nodes. The first node has been added successfully, but the second node doesn't want to be added :). Now I can add only one node to the DAG. I tried to add different servers first, but only the first one was added.
LOGS on the second nodes:
Application Log
"Failed to initialize cluster with error 0x80004005." (MSExchangeIS)
Failover Clustering Diagnostic Log
"[VER] Could not read version data from database for node msc-co-exc-04v (id 1)."
CMDLET Error:
Summary: 1 item(s). 0 succeeded, 1 failed.
Elapsed time: 00:06:21
MSC-CO-EXC-02V
Failed
Error:
A database availability group administrative operation failed. Error: The operation failed. CreateCluster errors may result from incorrectly configured static addresses. Error: An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode()
(MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed. [Server: msc-co-exc-04v.int.krls.ru]
An Active Manager operation failed. Error An error occurred while attempting a cluster operation. Error: Cluster API '"AddClusterNode() (MaxPercentage=100) failed with 0x5b4. Error: This operation returned because the timeout period expired"' failed..
This operation returned because the timeout period expired
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.3.174.1&t=exchgf1&e=ms.exch.err.ExC9C315
Warning:
Network name 'msc-co-exc-01c' is not online. Please check that the IP address configuration for the database availability group is correct.
Warning:
The operation wasn't successful because an error was encountered. You may find more details in log file "C:\ExchangeSetupLogs\DagTasks\dagtask_2014-11-17_13-54-56.543_add-databaseavailabiltygroupserver.log".
Exchange Management Shell command attempted:
Add-DatabaseAvailabilityGroupServer -MailboxServer 'MSC-CO-EXC-02V' -Identity 'msc-co-exc-01c'
Elapsed Time: 00:06:21
UPD:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.
Please, help me if you can.

Hi, Jared! Thank you for the reply.
Of course I did it already :) I have new info:
when Exchange servers ran on the same Hyper-V node, the DAG is working well, but if I move one of VM to another node, It stops working.
I have installed Wireshark and captured trafic of cluster interface. When DAG members on the same HV-node, there is inbound and outbound traffic on the cluster interface, but if I move one of DAG member to another node, in Wireshark I see only outbound traffic
on both nodes.
It's confused me, because there is normal connectivity between these DAG members through the main interface.

Some help with migrating exchange 2010 to exchange 2013 + installing another exchange 2010 to be edge-forefront-proxy server

Hi guys (and girls)!
Hear me up. The idea is like this:
A friend of mine has currently Exchange 2010 SP3 in his environment with Forefront Protection installed on it. As we all know Forefront Protection is discontinued in Exchange 2013 environment because Exchange 2013 on-premisses is using integrated tool for
doing that, but a friend of mine would really like to stick with Forefront Protection because it is "much better tool" then integrated stuff in 2013.
Ok, so here's the idea. Exchange 2010 SP3 with Forefront is installed on Phisical machine (so, not virtualized) on 2008 r2 std OS. We decided to move to Exchange 2013 because we wanted to achieve DAG on Exchange 2010 but we realized that is not possible
because 2008 R2 STD OS does not support failover-clustering functionality, but you are able to achieve that on newer OS for example 2012? Ok, so we bought another server, where we are planing to install Vmware Esxi and put two virtual machines on it.
One Will be 2012 r2 STD OS with Exchange 2013 on it, the other Will be 2008 r2 STD with Exchange 2010 Edge role + Forefront on it. We are planing to move Exchange 2010 production server to virtual machine Exchange 2013, and newly virtual machine
with Exchange 2010 edge server will only be "a kind of Proxy server with Forefront functionality". What concers me?
Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
bostjanc

Should we install Exchange 2010 edge transport 1st, or Exchange 2013? I think I have read somewhere after you put Exchange 2013 in production you are "unable" to install any previous Exchange versions is that true?
already answered by PS CL above
One more question about what happens after you install another Exchange 2010 with Edge role in production enviroment? Does installation effects a production enviroment, let's say we do just a clean installation of Exchange + ran updates?
No it does not as long you don't make any changes on send/receive connector and do the EdgeSubscription. As soon as you do the Edge subscription there will be send/receive connector created, so pay attention how to setup the Edge Server.
Which roles do you need to install on Exchange 2010 to achive Edge role? Do you need to have all the roles install for having Edge server (mailbox, hub,cas?).
Just install the Edge Transport Server and make sure you install ADLDS services.
as you have mentioned you are doing to install both Mailbox and Edge server on the same VMware - it is a single point of failure.
Where Technology Meets Talent

Updated: Event ID 1006 - Can not delete Mails in OWA after installing SP1 (Exchange 2010) = Outlook and OWA Light are OK

Hi all,
4 Exchange Servers (2 DB + 2 CAS NLB Cluster) all Exchange 2010 SP1
Outlook work fine.
If I delete a message in OWA i became the following errors:
Internet Explorer:
Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 0.
Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 0
Firefox:
Die Netzwerkverbindung ist nicht verfügbar. Wenn das Problem weiterhin auftritt, wenden Sie sich mit folgendem HTTP-Statuscode an den Helpdesk: 302.
Translation: The networkconnection is not available. If it happens again, contact the helpdesk with HTTP statuscode 302
Event ID 1006 MSExchange Mailbox Replication
Fehler: MapiExceptionNetworkError: Unable to make connection to the server. (hr=0x80040115, ec=-2147221227)
Before SP1 it worked fine.
Can somebody help me ?
Kind regards Andy

Hi,
First, I would like to confirm the following questions:
1. Does the issue occur on certain user mailbox via OWA or each user mailbox?
2. Which OWA folder’s email cannot be deleted, Inbox, Sent Items or each folder?
3. Which version of operating system is installed on the client machine, Windows XP, Windows Vista or Windows 7?
At this stage, I suggest you temporarily disable firewall and anti-spam for a test. If the emails still cannot be removed via OWA, please refer to the following article
and use isinteg tool to check and repair Information Store.
Description of the Isinteg utility
Thanks.
Novak Wu-MSFT

Does Mail (3.6) work with MS Exchange Server 2003?

I'm struggling to get Mail to work with an exchange server.
Apparently, from the company's FAQs, we can hook up an iPhone, but alas not Mail.
With the iPhone directions, they talk about a "domain" field, which doesn't show up in Mail.
Any tips or clues would be appreciated.

I'm not entirely sure why this works now, but it does. Yay!
My problem evolved such that I, when I sent out through a different outgoing server, a recipient would see the address of the outgoing address, e.g. if I was using the gmail servers it would look like [email protected], and not the [email protected]
So as a work around I tested sending out messages with my [email protected] address in the Reply To field. That works.
Strangely, a Sent mailbox with for my [email protected] has appeared. Even messages that I've sent out with nothing in the Reply To field indicate that they've come from my [email protected] address.
Keys to making it work:
• Set up the exchange address as an IMAP account (not an exchange account)
• Use the above referenced source forge tool
• Partner with the company's IT people for whatever assistance they can offer
• Use a Reply To field with the exchange, if required

My mail won't sync with microsoft exchange account

Macbook pro 10.8.1
I have my Mail setup to sync with a Microsft Exchange Account. All syncs between my exchange account, my iPad and iPhone. However on my laptop, old messaged that I deleted ages ago are still there. I get new mail, so I know that it is syncing at some level. When I try to delete the old messages, it tells me I cannot delete them....they are like a lingering shadow that is annoying as there are about 20 of them!

Add it as an Outlook account, but still use your full email adress as a hotmail address.
Use this link if needed: ssl.apple.com/support/mail-settings-lookup/

Calendar Issues with ActiveSync Exchange 2010 14.1.438 to iPhone IOS 6.1.4

The iPhone is missing some new calendar meetings and appointments. It is so random, some of them are meeting request I accepted and some of them are appointment I made on Outlook 2010. I see them on Outlook 2010 and OWA. If I delete the meeting or
appointment from Outlook and then put it back; it shows up on my iPhone. It also sync if I delete the syncing of the calendar to the iPhone and put then add it back on.

Hello,
Please refer to the following article to troubleshoot your issue.
http://blogs.technet.com/b/exchange/archive/2010/07/01/3410271.aspx
http://support.microsoft.com/kb/2563324
If the issue persists, please collect some logs.
http://blogs.technet.com/b/exchange/archive/2012/01/31/a-script-to-troubleshoot-issues-with-exchange-activesync.aspx
Cara Chen
TechNet Community Support

Contact photo Outlook Exchange 2010 Issue

I use iPhone 4S with OS 5.0.1. I use Exchange to sync my mail, calendar and contacts with my Exchange 2010. However, when I sync my iPhone contact photos with Facebook on my iPhone, contact photos are not visible on Outlook but instead appear as empty squares. Any ideas? Thnks!

Same here - I've been Google’ing a lot, and it seems there may be a problem with the photo resolution from FB against Outlooks (which looks like demands 72 dpi?!?)
Actually, if you open a contact on the iPhone, then "edit" and edit the photo (without making any changes) and then save, the photo will appear in Outlook in a couple of seconds. However, if you re-sync with FB, the photo will disappear again
This has worked before, so I really hope they can sort it out....
iOS5 and Outlook20007 btw...

E52 Mail for Exchange with Exchange 2010

I need to sync all the mobile phone in my organization with an Exchange 2010 server.
We have some different phone models like E90, N82, N95 that works fine with some different Mail For Exchange version.
But the E52 models can't works in syncronization and I can't upgrade the MfE version inside it.
Exchange server logs write this error: "DeviceNotProvisioned_Budget" Anyone know what this mean?
Thanks
Davide

Noted your post.
I have an E52 but could not get the MfE to work.
I have crossed checked the authentication settings on another Nokia E71 and this word fine but for some reason the E52 will not work. I will try the Roadsync but it seems a lttle strange that a 3rd party prodcut is needed on a new phone when Nokia should solve this. I have sent my phone off to our IT dept for them tio assess the issue. My view for what its worth is its an SSL issue, we use MfE 2003 with SP2 and I think this maybe the issue.
Comment ?

Unable to SEND mail using Activesync in Exchange 2010 server on iPhone or Windows Mobile 6.1

Hi All,
We've been setting up a new SBS 2011 server for a client this week. Everything is working, except the staff have 4 x iPhones to connect with Exchange ActiveSync.
There are 2 x iPhone 4's and 2 x iPhone 3Gs's. We can setup the Exchange accounts on each of the phones and they are all able to sync mail and calender etc with the server.
The problem we have is when any of them try to send mail from the phone, it gives an error : "Cannot Send Mail - An error occurred while delivering this message" and it sits in the outbox on the phone.
The newsgroups and forums are littered with people having issues with IOS4 and Exchange 2010 but most of these are from June-August 2010 when IOS4 version was around 4.00 or 4.01
A lot of these people had iPhone 3 handsets running with IOS 3.1.3 which worked with Exchange 2010 but when they upgraded to IOS 4, they had this problem sending mail.
It seems that for most of them, the fix came in the form of IOS version 4.1 which fixed the send issue for them.
We have a variety of Hansets and IOS versions (including an iPhone 3Gs running IOS 3.1.3) but are unable to send mail from any of them:
iPhone 3Gs    IOS 3.1.3
iPhone 3Gs    IOS 4.3.3
iPhone 4       IOS 4.3.3
iPhone 4       IOS 4.3.5
I was surprised that the iPhone 3Gs running 3.1.3 was unable to send either as nearly all the forums etc I read with this issue said the iPhone 3's worked with that IOS version.
Today we used a test iPhone 4 handset from our office to connect to an almost identical Small Business Server 2011 we setup two weeks ago for another client.
The test iPhone 4 was able to connect, Sync and Send email on that server but when set it to connect to this SBS 2011 server, it gets the "Cannot Send Mail" message the same as the others. So clearly the handset is working (on the other server at least),
it must be something misconfigured in this Exchange server right?
We ran the Exchange Remote Connectivity Analyser on the Exchange server and got green ticks across the board.
Outlook Web App and Outlook Anywhere both work normally. Everything we can test on the Exchange server works except sending from any iPhone.
Having said all that, I just setup a Windows Mobile 6.1 handset to sync with the Exchange 2010 server as a test, and it appears to have the same issue.
It will connect & Sync Mail, Contacts and Calendar but if trying to send an email from the phone, it will just sit in the outbox.
Does anyone have some insight into what the problem may be?

Further to this .. I found the solution on a MS Exchange 2010 support forum.
It was not a certificate or firewall issue, looks as thought the “Accepted Domains” in Exchange Mgmt Console –
Org Config – Hub Transport cannot have any spaces in the name field.
I had some spaces and the emails were not downloading fully and able to send. Once I removed the spaces from the Name field and
restarting the Exchange and IIS services emails were now being sent and received ok.
Check
out :
http://social.technet.microsoft.com/Forums/en-US/exchangesvrmobility/thread/321eae51-9cbd-4a5e-85c1-68d8f7b523c3
This
is good one to add to your knowledge bank in case you come across it in the future.
Rgds Gerry

Mail 4.4 and Exchange 2010: not staying connected

I am using Mail 4.4 connected to an Exchange 2010 account, and with an SMTP server instead of the actual Exchange connection to send outgoing mail due to the "no from: field" issue.
I have noticed that Mail is not staying connected to the server. IIRC, Exchange is intended to be a live connection, and messages that arrived quite some time ago are nowhere to be seen until I click "Get Mail." Up to now, I've relied on IMAP with IDLE for mail, as I'd rather receive everything in real time instead of relying on a scheduled polling interval.
Why is this? Is it just an issue of being Exchange 2010 instead of Exchange 2007, or is there something I can do to fix it?
My iPhone running iOS 4.2 works perfectly with the same Exchange account.

IMAP with IDLE for mail, as I'd rather receive everything in real time
Certainly in the current version of Mail, you'll get more of a push effect if you use IMAP IDLE instead of EWS for communication with an Exchange server. Exchange Web Services feel less responsive.
The Get Mail routine is much quicker with IMAP IDLE than with EWS. With EWS: the more mailboxes you have, the longer it takes.
However: if you use IMAP instead of EWS, some features of Exchange will appear less graceful. Noticeable with e.g. messages relating to calendaring.
(Note to self: I should review this after our organisation has completed its transition from Exchange Server 2003 to Exchange Server 2010.)
messages that arrived quite some time ago are nowhere to be seen until I click "Get Mail."
Using EWS: in the absence of a real-time/push effect, three approaches come to mind:
a) pull manually (click Get Mail)
b) prefer a schedule
c) simply move or delete any message to trigger an update of that mailbox.
For my Inbox, I prefer (c). An update of the Inbox alone is much faster than the (Get Mail) update of all mailboxes.
Eventually, I guess that Apple will improve Mail to make it respond immediately to changes on the EWS side.
Then, I'll go back to using e.g. GrowlMail to weed most messages immediately, as each one appears (much more pleasing than ploughing through a massive Inbox).

Mail 5.2 (1278) with MS Exchange 2010

Similar Messages

Maybe you are looking for