Mail 5.3 Rules export and import to new laptop problem

I was using Lion 10.7.5 and Mail 5.3 and had alot of rules setup.
I now have a new laptop. All my mailboxes transferred over but not the Rules. Please let me know how to export from old laptop and transfer to the new laptop.
Thanks and I look forward to hearing from you.

Mail reports the account offline when the Mail Server does not respond. This can be dues to bad password (which is why it tries to ask for a new password) Server too busy, wrong communication ports selected, encryption problems, and many other issues.
For commercial email, the check for passwords etc can be accomplished by using a web Browser and navigating to the Mail Server directly, and entering your Username and Password to collect your Mail directly (this is referred to as "Web Mail" pickup).
Often after several cycles of "enter a new password", the password stored on your Mac becomes damaged or gets deleted, and needs to be re-entered in:
Mail > Preferences > Accounts
Checking with your company representatives to verify Mail Server credentials such as: POP Vs. IMAP, what ports to be using, whether encryption is supported, and other parameters -- can be useful.
It is also important to understand that Mail uses TWO Servers -- one for Sending and one for Receiving, and that they have possibly different ports and password.

Similar Messages

OEM Rules export and import

Dear All,
I need help in exporting the existing rules set in present OEM to new OEM installed.
Is it possible?
Thak you,
Anil

Hello Pavan,
We have set up an OEM 10.2.0.4 and cinfigured around 104 databases.
now again we are setting up another OEM for different customer. We will have to set all the rules manually if dont have any other alternate method to get the rules from 1st OEM and import the same in newly created OEM.
I am checking if any alternate method which can use my existing OEM, istead of setting these rules manually
Thank you,
Anil

Export and Import rules in Rule Architect

Hi
CAn some body tell me what is export and import under utility in rule architectect....
In fact I have prod and traning system linked to compliance calibrator 5.2.. I am creating a new rule set for my training system... I want to copy the rules from the production system to the new training rule set... How can i do so

HI
Export is to take a copy of rule set from CC and export it to a flat file. Same way you can import the to any other environemnt of CC
My second question regarding creating a new rule set for Training environemnt, that you have to create Functions with different names probably you can put "z" or "T"in front of the functions do denote it is for training system and than create it
Parveen

Export and Import tab in BusinessView Manager

Post Author: palm
CA Forum: Crystal Reports
Hello All, I want to know the use of Export and Import tabs in BVM I tried to export a BV using the Export tab , it created an XML file and now , what can we do with that XML file Appreciate any replies on this
Thanks!!

HI
Export is to take a copy of rule set from CC and export it to a flat file. Same way you can import the to any other environemnt of CC
My second question regarding creating a new rule set for Training environemnt, that you have to create Functions with different names probably you can put "z" or "T"in front of the functions do denote it is for training system and than create it
Parveen

Export and import of Apps EUL

I have a Apps EUL and use an Apps user id to work in Discoverer Administrator. This is what the Oracle documentation says and it has been working fine.
Now I want to export the EUL but when I start the process I get a message that the user does not have access to all the objects and that only the accessible objects will be exported. Shouldn't the Discoverer Manager/Administrator be able to do a full export?
To get around this problem, I have now been advised to use a database user (the EUL owner) to do the export and import with. Is this the correct way? The Oracle documentation suggest that a database user should never administrate the Apps EUL. Are exporting and importing somehow exluded form this rule?
Thanks!

Hi Aparna!
The Apps EUL was created using a database user. Since then, the EUL has been administered by a Apps user that is dedicated to EUL administration.
The documentation actually recommend that you create the Apps EUL with a database user and from there on administer the Apps EUL with the Apps user SYSADMIN. My company policy doesn't allow me to use SYSADMIN so I have a "custom" Apps user that I use to do all EUL administration. If at all possible, you should try to use SYSADMIN.
The guides and website don't really have a step by step guidance as far as I can remember, more explanatory. I would suggest an email to Michael Armstrong-Smith of the learndiscoverer website. He has helped me alot with this particular subject!

Exporting and importing word doc

Hai i want to export and import the ms-word document to Sql server.
it is like sending attachment and downloading attachment with e-mail.
please help me how can i do this.if u have example please give me.
what data type i have to take for that coloumn.
thank u in advance.

Just as a guess I would look at a BLOB.

Exporting and importing non-sealed MPs to another environment

Hello,
I have a task to rebuild SCOM environment, replace SCOM 2007R2 with 2012R2, there are a lot of MPs with groups of monitoring objects, overrides for some monitors and rules, is it possible to import these MPs to the new SCOM after agent
installation to save all configuration? These objects are saved in the MPs with GUIDs, I think these GUIDs will be changed in the new management group, so I need to create these groups and overrides again, yes? What can I export from old MG and import
to the new MG automatically to reduce manual work? I have found script which can export and import membership of security groups, also all subscribers and notifications are saved in the non-sealed MP. Also I have found small post with information to save
favorite and scheduled reports by backing up and restoring ReportServer database.

Hi,
Yes, we can import saved MP to the new management group to use those saved overrides and groups.
I would like to suggest you follow the link below to do side by side migration from SCOM 2007 to SCOM 2012:
OpsMgr 2007-2012 Side-by-Side Migration Blog Series
http://www.systemcentercentral.com/opsmgr-2007-2012-side-by-side-migration-blog-series/
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to export and import the lsmw

Hi Friends,
How to export and import the objects in lsmw
from dev to qas(quality) systems........
its urgent.........
regards,
venu.

best way is to create a transport and move it to other enviroments
There are two ways of Transporting for this. Can choose any one.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

Question regarding export and import of Hyperion Security during upgrade

Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
K

Ihatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

SQL Developer 2.1: Problem exporting and importing unit tests

Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.

Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team

Require help in understanding exporting and importing statistics.

Hi all,
I am bit new to this statistics.
Can anyone please explain me in detail about these commands.
1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE);
2) exec DBMS_STATS.CREATE_STAT_TABLE ( ownname => 'MRP', stattab => 'MRP_ATP_3');
3) exec DBMS_STATS.EXPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP',statid => 'MRP27jan14');
4) exec DBMS_STATS.IMPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP');
I understand that these commands are used to export and import table statistics.
But please anyone help me in understanding this indetail.
Thanks in advance.
Regards,
Shiva.

Shiva,
Please post the details of the application release, database version and OS.
Please see (FAQ: Statistics Gathering Frequently Asked Questions (Doc ID 1501712.1) -- What is the difference between DBMS_STATS and FND_STATS).
For exporting/importing statistics summary of FND_STATS Subprograms can be found in (Doc ID 122371.1)
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Exporting and Importing of Schema

The Export and Import of Schema is not working consistently in SP4.
When I create a new repository from the schema, all the subtables get created. The main table is has only one field in it. It reads Category.
The other fields in the main table are missing and are not imported during the Import Schema operation.
Has anyone encountered the same issue?
If so, please let me know how you overcame this errorneous behaviour?

Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers

Exporting and importing applications/workspaces

I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks

"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel

Mail 5.3 Rules export and import to new laptop problem

Similar Messages

Maybe you are looking for