Mail 6.2 Duplicate Last Name with Exchange 2010

When I am composing an email my Exchange 2010 domain contacts show up with two last names (eg. John Smith Smith). I've followed the recommendations of a couple different discussions including deleting the Exchange contacts and then re-adding them, but eventually the problem comes back. I've also deleted all previous recipients that had duplicate last names, but the problem persists. Any help would be greatly appreciated.
Best regards,
Jim

This is the sole reason I went out and bought MS Office for osx. I tried to deal with this for the last couple of weeks, but couldn't take it anymore. It may seem minor to the product mgrs in Cupertino, but it's an extremely annoying behavior which keeps this Mac from being able to stand on it's on in the work environment. Hopefully this will get fixed before I have to renew my Office payment.

Similar Messages

Missing Keyboard - Duplicate Last name in contacts - Background randomly back to default

My husband and I both just got the HTC incredible 2. I got the same phone so that we would have a better chance at troubleshooting if anything came up. I still can't figure out either of these.
First of all there is NO keyboard anywhere on his phone. He cannot type anything anywhere, contacts or otherwise. When we go under settings and keyboard, there is nothing listed.
At the same time that the keyboard dissapeared the background on the phone changed from his chosen map design, to the rainbow default background. And we are unable to restore the other one.
Second problem also happened on his old phone, a Gzone Ravine. His contacts will randomly have 2 last names. Ex: John Doe Doe. He will fix it and it will happen to other contacts, or the same one again. Totally random. He believes it is something with the backup assistant. When they transferred his contacts from to the droid with the assitant the problem was not there. However after a couple days the duplicate last names started showing up again.
Has anyone known of a bug or virus attached wiht the backup assistant?
Thanks in advance!

For the first issue it sounds like a call to tech support is in order. Honestly, a factory reset might help but if it's brand new shouldn't need that yet. I would say if you are within your 14 days go back to where you bought it and exchange for a new one. If you are outside of 14 days I would definately say tech support.
As far as backup assistant goes I would check and see what it says for the names on My Verizon. Make sure everything is correct on both sides and then snyc it.
Hope this helps and you get your answers.

Does SL Mail/iCal/Address Book work with Exchange 2010?

Is anyone using Exchange 2010 with Mail/iCal/Address Book (via the Snow Leopard web services interface and not the IMAP interface)?
My company is about to upgrade Exchange from 2003 to either 2007 or 2010 and since the boss and I both use Macs we want to make sure that SL's apps will work no matter what choice of Exchange server is made.

SL has not been tested with Exchange 2010 as far as I am aware. 10.6.2 was only tested against the 2007 variant.

Mail for Exchange incompatible with Exchange 2010

MfE is incompatible with Exchange 2010.
There seems to be a difference in the EAS protocol used.
This causes synchonisation to fail when syncing the calendar.
If anyone has a workaround please let me know and Nokia please fix this issue?
Solved!
Go to Solution.

Hi there,
just installed Mail4Exchange (3.00.050) from the ovi store on my Nokia e71.
Unfortunately it doesn't seem to sync anymore with my google apps account. Anybody else encountering this problem? I get a message every other second that there seems to be a sync problem and that i should contact my admin if this stays on.
It worked perfectly with the older version though.
Thanks for any advice.
Regards,
JohnnyT76

Contacts app not finding names in Exchange 2010

Contacts app not finding names in Exchange 2010 server
This is weird, could be a bug in 10.8.2, not sure, want to see if anyone else is seeing this.
Mountain Lion 10.8.2
Exchnage account created for: Mail, Contacts, Calendars. All looks good there.
Cannot lookup names / email addresses in Contacts Global Address List (GAL) or in Mail app.
Can delete the Exchnage account in Contacts and re-add it, and it will work.
Once Contacts quits and is re-luanched, no dice. No connection, just spins and spins.
Eventually Contacts app crashes, (not responding).
Outlook 2011 works just fine, seems an issue with Contacts.
Thanks,
John K

I thinkk this is a bug in Contacts app, 7.1 (1167), in MT Lion.
If one inputs the actual AD domain controllers dns name, for the Internal Server, Contacts app does the lookup successfully and pretty quick.
This is how it is on Outlook 2011 BTW. Directoy Service in OL 2011 is the AD domain controller FQDN, not the Exchnage server.
thanks,
jk

Exchange 2013 DLP with Exchange 2010 mailboxes

Ive got an Exchange 2007/2010 environment. I've been looking at Exchange 2013 and am interested in the DLP funtionality.
There are no plans to move mailboxes to Exchange 2013 but would it be possible to install an Exchange 2013 CAS/Mailbox server in my environment and route email through it to make use of the DLP ?
Current environment consists of Exchange 2010 DAG, Casarray and hub transport servers, and Exchange 2007 mailbox servers, CAS and hub transports. Mail to the internet is sent to a smarthost.
Thank you.

Hi Maria,
DLP Policies are actually a specific transport rule. Since the transport rules with Exchange 2010 didn’t provide such feature to monitor and check the e-mail
content, I am afraid, in theory, it’s not possible.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Edge 2013 sp1 with exchange 2010 organisation.

Dear reader,
I have an exchange 2010 sp3 organisation with 1 client access server with hub transport and a 2 node DAG. Can I install a stand alone exchange 2013sp1 Edge role on a seperate machine in DMZ and subscribe the exchange 2010 hub transport to it. This
in preparation to move to exchange 2013sp1 later this year. The current exchange 2010 edge role is installed on a TMG 2010 machine. Since TMG 2010 is dropped and we also have issues with the current edge's mailflow, i'd like to have a dedicated Exchange edge.
Best regards,
Ruud Boersma
MCITP Enterprise administrator

Sure, You can install Edge of Exchange 2013 on a dedicated server in DMZ and subscribe with Exchange 2010 Transport server.
Or you can allow the Existing Exchange 2010 Edge server to serve your internet mail flow till the time you implement Exchange 2013 in the environment. I would suggest Exchange 2013 CU5 as a lot of issues were fixed in that which were identified with Exchange
2013 SP1.

Security mails from Microsoft cant be delivered to Exchange 2010

Hi there,
I have strange issue with delivering e-mails from Microsoft account team to my Exchange 2010 users.
That is single Exchange 2010 server scenario with Microsoft antispam features installed.
There is one setting that is affecting behavior of that: Sender-ID filtering. If it is configured as reject messages, the authentication e-mails are rejected with error:
550 5.7.1
Missing purported responsible address,MissingPRA,No valid PRA
I was doing some research around the Sender-ID filter and found this:https://technet.microsoft.com/en-us/library/aa997242(v=exchg.141).aspx pointing
to this:
http://www.ietf.org/rfc/rfc4407.txt
(see chapter 2, points 5 and 6)
And Im thinking that the From: header is too long for the filter having 133 characters...
From: =?windows-1250?Q?T=FDm,=20kter=FD=20se=20star=E1=20o=20=FA=E8ty=20Microsoft?= <[email protected]>
See https://tools.ietf.org/html/rfc2822 chapter 2.1.1
And if from header is not read properly, there is no other chance to define PRA.
Im attaching the header with some privacy related edits (*)
And also connection to my previos post:
https://social.technet.microsoft.com/Forums/cs-CZ/63366c5f-5028-4b86-8cd9-815b2474083e/authentication-email-from-onedrive-is-not-delivered-to-exchange-2010?forum=exchangesvrsecuremessaging
Received: from BAYIDSTOOL3E005 ([65.54.190.61]) by BAY004-OMC1S28.hotmail.com over TLS secured channel with Microsoft SMTPSVC(7.5.7601.22751);
Wed, 21 Jan 2015 03:50:31 -0800
Message-ID: <[email protected]>
X-Message-Routing: sKFde7CS5BHygFZaC4gFZWeHmOM+Rjf1iOmv8meDbQqeD+9kHFgbAflrz5UYy6v/Ov/vRliTx0hzi7ScTgwYCoH5DCu2Fahk9R9SdBH5Nsa5oB9Sz/gjNEAPF3tI/C3nFECX7BGzTiSSOg8TKAUbuCEwYGg==
Return-Path: [email protected]
Date: Wed, 21 Jan 2015 03:50:31 -0800
From: =?windows-1250?Q?T=FDm,=20kter=FD=20se=20star=E1=20o=20=FA=E8ty=20Microsoft?= <[email protected]>
Subject: =?windows-1250?Q?Bezpe=E8nostn=ED=20k=F3d=20=FA=E8tu=20Microsoft?=
To: <t*****f@jv*******ms.cz>
X-Priority: 3
X-MSAMetaData: Cn0c88Cz0sGsI0Nfm6RO9sA/7VbWGUJeVNx9a4NXy37JI18dwFph0xDWcW8LScCF+MW2Lz28gPZz9dv7HW6EgfszNl0B6YfvjoqD5EXhCIrXhZTYSSbIB1Ix/LTVnuXoQieHLbzlKEn/wPNttCFyHop5rh2n8Sm26X38Eqj+/+Nh4VXFdEZ2I+gyInEElCSMfg==
MIME-Version: 1.0
Content-Type: multipart/alternative;
boundary="------=_Next_Part_0490624281.535"
X-OriginalArrivalTime: 21 Jan 2015 11:50:31.0736 (UTC) FILETIME=[757B2B80:01D03570]
Do anyone knows the limits of header lines in the Exchange 2010 Antispam Filters?

I have tested it deeply and strange thing gets even stranger:
If I send entire email with telnet the difference between error and accepting message by server is comma in From: header. so:
Message is not accepted with that line:
From: =?windows-1250?Q?T=FDm,=20kter=FD=20se=20star=E1=20o=20=FA=E8ty=20Microsoft?= <[email protected]>
Message is accepted if I delete a comma:
From: =?windows-1250?Q?T=FDm=20kter=FD=20se=20star=E1=20o=20=FA=E8ty=20Microsoft?= <[email protected]>

Unity 5.0(1) with Exchange 2010

According to the following link, Unity 5.0 supports Exchange 2010 as the partner Exchange server.
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/unity/7x/using_exch2010/usingex2010withcu7x5x.html#wp47622
However, when I get to step 14 of this document (installing ExchangeMapiCdo.exe) I get an error saying it can't be installed with this version of Exchange.
I was just wondering if anyone elsel had tried to run Exchange 2010 with Unity 5.0 and if so, how you were able to get it to work. I followed all the steps in this document and everything seemed to be working until this step.

3 things:
1) You should get a TAC case going, if you haven't already.
2) For Unity 5x, ES83 was replaced by ES85 (which was yanked off the download site almost like a ghost in the night) and now there is ES86. You may want to read up on what is fixed here in this ES.
3) I think you may have your service account mailboxes homed in the wrong place. If you note there, is a section for where to put the mailbox for the UnityMsgStoreSvc. Excerpts I'm looking at are:
Adding One or More Exchange 2010 Servers to an Existing Cisco Unity 7.0 and/or 5.0 Installation
Step 14 On the Cisco Unity server, install ExchangeMapiCdo.exe, which you downloaded in Step 4.
Step 15 On the Cisco Unity server, install the version of the Permissions wizard that you downloaded in Step 2.
Step 16 Run the Permissions wizard, and select the Exchange 2010 message stores in which mailboxes for Cisco Unity subscribers will be homed.
Step 17 At the end of the Permissions wizard, on the You Have Completed the Cisco Unity Permissions Wizard page, click Granting Microsoft Exchange Administrator Rights, and do the procedure in the Help file to add the installation and directory services accounts to the Exchange 2010 Organization Management role group.
Step 18 Restart the Cisco Unity server.
Step 19 Move or create a mailbox for the Cisco Unity message store services account (typically UnityMsgStoreSvc), as applicable:
Exchange 2003 or Exchange 2007
mailbox already exists
Move the mailbox for the account to Exchange 2010.
No mailbox
Create a mailbox for the account in Exchange 2010.
Step 20 Remove the Exchange 2010 RPC limit for the message store services account by creating and applying a new mailbox policy to the message store services account:
a. Open an Exchange 2010 Management Shell window.
b. Create a new policy with unlimited RPC connections, for example:
new-throttlingpolicy -name "Unity Exchange 2010 Policy" -RCAMaxConcurrency $null
c. Apply the new policy to the message store services account, for example:
set-mailbox -identity "UnityMsgStoreSvc" -throttlingpolicy "Unity Exchange 2010 Policy"
d. Confirm that the mailbox is using the new policy, for example:
get-mailbox -identity "UnityMsgStoreSvc" | fl | findstr "Throttling Policy"
e. If you have more than one Cisco Unity server: Repeat Step c and Step d for every message store services account in the forest.
We recommend that you apply the policy to all message store service accounts, even the accounts for Cisco Unity servers for which you do not currently intend to home subscriber mailboxes in Exchange 2010 message stores. Applying the policy does not affect Cisco Unity performance, and it ensures that you will not encounter problems if you later move mailboxes to an Exchange 2010 server.
f. On each Exchange 2010 server with the CAS role, restart the Microsoft Exchange RPC Client Access service.
Personally, I would make sure you have all of these items down to a tee because, IMO, there is likely something that went astray in the install/backout/fix process.
Hailely

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

Unity 5.0 compatibility with Exchange 2010 SP2?

Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

Has anyone out there tested Unity 5.0 (1) with Exchange 2010 SP2? Did you have any problems? I understand that Unity 5.x has gone end of maintenance, and it has not been officially been tested for compatibility with Exchange 2010 SP2 for unified messaging. I don't anticipate being able to upgrade Unity until next year, but the sytem admins want to upgrade from Exchange SP1 to SP2 sooner. Thanks.

Limitations of SharePoint 2013 integration with Exchange 2010?

Customer using SharePoint 2013 and looking at whether its possible to integrate this with Exchange 2010 and which features would be available / limitations. Looking for a matrix similar to those found in the Good, Better, Best documents available for previous
versions. Nothing available on Recently Published content for SharePoint 2013 yet http://technet.microsoft.com/en-us/library/cc262043.aspx

I haven't seen a specific list, but the three features I've run into that only work with Exchange 2013 are eDiscovery in Exchange, Automatic Task Synchronization with Outlook and the Site Mailbox feature. There is a Legacy Task Synchronization mode
available that will work with Exchange 2010 if you turn off the Farm level feature controlling Exchange 2013 task synchronization. It lets users manually sync specific task lists with Outlook. But there is no task aggregation. I found this
whitepaper helpful for exploring the new features and how to turn them off when using Exchange 2010.
http://www.microsoft.com/en-us/download/details.aspx?id=38799
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Cisco Unity Connection Single inbox with Exchange 2010

I have a new installation of Unity Connection 8.6.2 using single inbox with an Exchange 2010 cluster frontended by a Netscaler load balancer.Functionality that does not work is when a new message comes into outlook and the message is read or deleted it does not update the status on the phone- IE turn off the MWI or if the message is deleted it is still a new message in Unity. If you click reset in the user unified message account, the status gets updated.
TAC says its a blocked port on Exchange TCP 7080 but that is open.

I followed this document :
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/unified_messaging/guide/85xcucumg020.html
but when i try to integrate CUC with exchange 2010 , i didn't find is clear enough
do you have Step by Step more clear than that link becouse my lab very close to your case.
Regards

TS4532 Any idea on the timing of the software update to fix the IOS6.1 problems with Exchange 2010?

Any idea on the timing of the SW update to fix the IOS 6.1 problem with Exchange 2010?
victor

In reply to Macca7275
We moved from Blackberry to iPhone for 120 services in 2010. We have just renewed the iPhone fleet. Security was the issue for the business that employs me (lawyers). When comparing the two, Blackberry performed without issue most of the time but we experienced a number of issues with the trackballs on individual phones. This was, however, the first of the Blackberry Bold models. The expense behind the scenes was one of the major factors for the move. It was cheaper to run Exchange and iPhones than Blackberry services. Our lawyers on the whole adopted the iPhones and a number have become quite proficient at using them. We ensured that we had a means to securely wipe and lock business phones. We chose Mobile Iron for this purpose but you will find other products to do the same job. Cost is probably going to be the deciding factor here. Our only negative factor was butterfingers resulting in smashed glass with the iPhones although I have had one user drown several phones.

Problem with Exchange 2010, Q10 and attachment

Q10 & Exchange 2010; unable to download and forward attachment
Hi all,
i have a problem with Q10 phone, sync with Exchange 2010 with activesync (not BES) all seem ok but unable to download attach.
When press "download" didnt start. Unable also to forward same message but i think is a chainde problem.
Same message from desktop (outlook) or OWA is ok and attach downloadable.
This is the only Q10 present in company for test so i cannot compare to others BB.
All other users connected to the exchaneg server have iphone & ipad no issue result. Email service seem ok also for desktop.
Firmware was updateted about 10 day ago.
Any idea for me?
Thanks

Hi marcottt,
Could you provide more detail please so I can better assist?
Do you have this issue with all attachment types? If not, what type of attachment are you having this issue with and what size is the attachment?
What happens when you try to forward the message? Is any error received?
Does removing and re-adding the email account make any difference?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Mail 6.2 Duplicate Last Name with Exchange 2010

Similar Messages

Maybe you are looking for