Mail 6.5 can't connect to my net supplier,I can take my mail with my phone or on the web but not by Mail 6.5

Mail 6.5 can't connect to my net supplier,I can take my mail with my I phone or on the web but not by Mail 6.5 it really look like the problem is from the program.

OS X Mail: Troubleshooting sending and receiving email messages

Similar Messages

Why can I receive mail on my iPAD during my visit to the USA but not send mail?

Why can I receive mail on my iPad during my visit to the USA but not send mail?

Double check to make sure that your same email addresses are set up on both devices in the Messages settings. Also ensure that you have text messaging forwarding turned off if you do not want to receive them on your iPad.

HT4356 Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example. What can I do?

Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Can send but not get mail....

This is strange - my mailserver has imap/ssl/password. Before 3.0 upgrade all worked fine (hm... except a couple of days when I just got my Iphone where actualle the very same problem showed up, but suddenly started to work).
So, I can connect to server and send mail. But I can't connect to server to read/fetch mail (connection failed message).
I've exact same configuration on my macbook - working like a charm. Tested to remove account on Iphone and recreate, resync, you name it. Still not possible to read, only send.
Why???

Anyone with any ideas are welcome....
Now I dropped all mail accounts on the phone and resynched with iTunes to recreate all mail accounts. Still - one of the accounts will not work. Possible to send but not read mail. And it is working on the mac.
regards,
/L

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

My kids desabled my mini ipad after several tries to log in. My computer that I used to sincronize it doesn't work anymore and i can't connected to itunes.. How can i restart it without the actual computer that I used before??

You can use any computer but your data will be lost if you have no backup.

I forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

i forgot my passcode for the ipad and i can't connect to iTunes because it keeps giving me error message that i have to unlcok the ipad first... any advice on how to restore the ipad or unlock it?

You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
This will tell you how to restore
http://support.apple.com/kb/HT1414
You will probably need to use recovery mode
http://support.apple.com/kb/ht4097

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

Dear Community, how can I connect SCSI tape recorder via USB to iMac ? Is there any adapter/converter on the market now ? Cheers, Marek

Dear Community,
how can I connect SCSI tape recorder via USB to iMac ?
Is there any adapter/converter on the market now ?
Cheers, Marek

Thanks Jan.
Actually the reason to use Quantum SCSI tape recorder is to back-up big amount of data (propriety movies footage) both on PC (what is quite easy, using SCSII host adapter with VHDCI 68 connector) and iMac what seems to be not easy. All my search by Google leads to that conclussion, they finished production of SCSI-to-USB or FireWire because somebody stopped to produce chips to covert protocols. So even buying noe second-hand adapter, no guaranty it's still working with Lion (nobody is developing drivers anymore). Strange is, nobody or just a few are using SCSII (Ultra 320) devices (while the transfer is not bad, 320 MBps what is 2560 Mbps, so the only limitation is tape recording (some 80 MBps) not an interface. Using compression mode I can (and I do) record 1,6 TB of footage data. However quite slow, is safe and cheap, comparing with any HD storage solution. USB 2 is much more limited.
I'm using Time Capsule for buck-up. But even 3 TB one day will be full of data, then old back-ups will be eaten by new once, what is not good idea for archives. I'm using another 2TB NAS HD (2x2TB RAID 1), but this is also going to be full soon.
Of course, you are right, the option is another machine (OSX,Win,Linux or Solaris) equipped with SCSII controller. But this requires another machine, just for back-up time to time, and in practice iMac folders must be shared with that small auxiliary machine because amount of data practically excluding even temporary data collection on auxiliary machine. And it must be transfer by wire, not WIFI, my only network. Tape recording is in my case really good, professional solution, isn't it?
Anyway, if somebody has similar requirements as me, and found the solution for SCSI, please let me know. So far, follow Jan's idea, I'm thinking about some embeded mini PC, fanless, equipped with slot for SCSI, with SOME smart system on-board, to deal with iMac for type recording. The option is previous Apple model, but to be honest, I became Mac/OSX user 4 years ago. I fell in love with Mac, but my knowledge about previous models is based on Google....
My desk becomes full of boxes. Do you know how big Quantum TC-L42BX is ? Is very big. And now another box.....another keyboard....another screen... And one small adapter could solve the problem. Eh....
Best regards,
Marek

I have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb

i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please

You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock

Can i connect my apple magic mouse and my apple wireless keybord with my pc?

can i connect my apple magic mouse and my apple wireless keybord with my pc?

try it find out

Why can I receive but not send mail?

Why can I receive but not send mail?

With sparse information you give I would venture that you have not set up the correct Outgoing Mail Server settings in Mail>Preferences>Accounts. Contact your ISP for their set up.

My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

Hey DM,
Is the Wireless(WL) router signal coming through the wired-router?
My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
Let us know.
Adam

Can't connect to sql*net, ORA-12638: Credential retrieval failed

after installed oracle9i, I can use sqlplus, but when I try to use sql navigator, I can't connect to sql*net.
I found out the following error message in logfile:
Fatal NI connect error 12638, connecting to:
(DESCRIPTION=
(ADDRESS=
(PROTOCOL=BEQ)
(PROGRAM=oracle)
(ARGV0=oracleoms)
(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))
(CONNECT_DATA=(SID=oms)(CID=(PROGRAM=c:\oracle\ora92\bin\ORACLE.EXE)(HOST=JZQGG31)(USER=OraUser))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 9.2.0.1.0 - Production
Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 9.2.0.1.0 - Production
Time: 11-MAR-2004 17:04:17
Tracing not turned on.
Tns error struct:
nr err code: 0
ns main err code: 12638
TNS-12638: Credential retrieval failed
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
=============================================
Hope somebody can help me! Thanks!

change in sqlnet.ora file
find under oracle home\network\admin\sqlnet
and
SQLNET.AUTHENTICATION_SERVICES = (NTS)
CHANGE TO
SQLNET.AUTHENTICATION_SERVICES = (NONE)
hope it will solve u r problem
kuljeet pal singh

My mac can into connect to wi-fi. What can I do?

my mac computer can into connect to wi-fi. What can I do?

Hello Rayanehman,
The following article provides steps that can help get you connected to WiFi.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Cheers,
Allen

Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

Can't connect wifi after install iOS 6, Can't connect wifi after install iOS 6

Mail 6.5 can't connect to my net supplier,I can take my mail with my phone or on the web but not by Mail 6.5

Similar Messages

Maybe you are looking for