Mail 7 (build 1822) does not execute rules

Yesterday's Mail 7 upgrade has (build 1822) no longer not executes my set of rules. Is anyone else having this problem? Is there any solution

Hello Sg42
Check to see if you have downloaded the latest update for Mail, it does resolve issues with syncing with Gmail.
Mail Update for Mavericks
http://support.apple.com/kb/DL1703
Regards,
-Norm G.

Similar Messages

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

After upgrading my iPhone 4S to iOS6, my Find My Friends app no longer links to my Contacts and does not show contact names. It only shows e-mail addresses and does not link up to the corresponding email address in my Contacts. How can I fix this?

I am also having problems with a site I am building. No matter what websafe font I use it displays as New Times Roman in FireFox. The correct fonts show in both IE9 and Chrome.
In addition, text shifts in FireFox. I have to position other text objects farther and farther apart as I go down the page or they start to overlap. Nav buttons and other images also have to be positioned in the wrong place for them to be in the correct place when the page is opened in FireFox. FireFox should display pages correctly by default. I can't expect th average user to have to tweek his/her settings to display my site.
I have been recommending FireFox on my website as the best browser. I might have to change that and abandon FireFox myself.

In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

MacBook Pro (Retina, 15-inch, Late 2013)
2,6 GHz Intel Core i7
16 GB 1600 MHz DDR3
NVIDIA GeForce GT 750M 2048 MB
OS Yosemite,
Finder versión 10.10.1
Mail Versión 8.1 (1993)
In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

Error by compiling yacy: Target "build-jar" does not exist

Hello
I am trying to compile yacy by using this PKGBUILD (based in this one: http://aur.archlinux.org/packages.php?ID=14464):
pkgname=yacy-svn
pkgver=7387
pkgrel=1
pkgdesc="Peer to peer searchengine"
arch=(i686 x86_64)
url="http://yacy.net/"
license="GPL"
depends=('java-runtime' 'sudo')
#depends=('jre' 'sudo')
#makedepends=('jdk' 'apache-ant' 'subversion')
makedepends=('apache-ant' 'java-environment')
conflicts=(yacy)
replaces=()
provoids=(yacy)
install=yacy.install
source=()
md5sum=()
_svntrunk=svn://svn.berlios.de/yacy/trunk/
_svnmod=yacy
build() {
cd $startdir/src/
msg "Checking out svn-tree..."
svn co -r $pkgver $_svntrunk $_svnmod || return 1
cd $startdir/src/yacy/
msg "Create working directory"
cp -r $startdir/src/yacy $startdir/src/yacy-work
rm -rf $(find "$startdir/src/yacy-work" -type d -name ".svn" -print)
# svn-file, that buildscript can determine revision
mkdir -p $startdir/src/yacy-work/.svn/
cp $startdir/src/yacy/.svn/entries $startdir/src/yacy-work/.svn/entries
cd $startdir/src/yacy-work/
msg "compile and copy files..."
ant build-jar installonlinux -DDESTDIR=$startdir/pkg || return 1
mkdir -p $startdir/pkg/usr/share/java/yacy/
cp lib/*.jar $startdir/pkg/usr/share/java/yacy/
cp libx/*.jar $startdir/pkg/usr/share/java/yacy/
mkdir -p $startdir/pkg/etc/rc.d
m4 -DArchLinux $startdir/src/yacy/addon/yacyInit.m4 >yacy.init || return 1
install -Dm755 yacy.init $startdir/pkg/etc/rc.d/yacy
msg "Delete working directory"
rm -rf $startdir/src/yacy-work
But in the process I get this error:
Buildfile: ~/yacy/src/yacy-work/build.xml
BUILD FAILED
Target "build-jar" does not exist in the project "YaCy".
I have searched information related using google but I don't find one solution.
I think it is a java related problem. I have installed Oracle's Java Runtime Environment jre-6u23-1
I use Archlinux x86 2.6.36-2.
Can anyone help me please?
Thanks in advance

OK
Still I can't install yacy, but I was reading the file readme.txt included in the program's tarball.
There, says to start yacy run:
./startYACY.sh
I get this terminal output:
****************** YaCy Web Crawler/Indexer & Search Engine *******************
**** (C) by Michael Peter Christen, usage granted under the GPL Version 2 ****
**** USE AT YOUR OWN RISK! Project home and releases: http://yacy.net/ ****
** LOG of YaCy: DATA/LOG/yacy00.log (and yacy<xx>.log) **
** STOP YaCy: execute stopYACY.sh and wait some seconds **
** GET HELP for YaCy: see http://wiki.yacy.net and http://forum.yacy.de **
>> YaCy started as daemon process. Administration at http://localhost:8080 <<
When I have tried to access to localhost, I get the following message:
Error connecting to localhost. Connection refused.
But from terminal I can ping to localhost
Can anybody help me with any of this troubles please?
Last edited by zuargo (2011-01-08 15:55:48)

Build.vi does not output Generated files list for installer

In LV 2011, Build.vi does not output a "Generated files" list when used on an installer. Example attached. When run on my system, "Generated files" is an empty array and "error out" shows no errors or warnings. The built installer can be found on disk, so I know the build succeeded.
I critically need to know the target folder for my built installer so I can use it in an automated build tool. Assuming this is a real bug, can someone help me with a workaround that doesn't require an operator to point the VI to the target path?
Attachments:
build_vi_bug.zip ‏10 KB

Hi David,
You may find the solution in the following two links
Creating Builds Programmatically
Build executable and installer programmatically
In the second link, there is an example code posted by Suse to find the destination path programmatically, hope it helps answer your question.
Yupeng J.

TS3276 I created a new mailbox in mail, but it does not show up in my list

I created a new mailbox in mail, but it does not show up in my list of mailboxes. Now I cannot change it or delete it. I keep getting an error message that I must resolve conflicts, but it won't let me change anything. Can you help me fix this?

Found it, thanks to the answer Vixen-of-Venus gave - thanks.

Build.xml does not exist!

Hi ,
I'm doing the converter program (EJB) from J2EE1.4 Tutorial. I installed J2EE1.4 already. I copied converter programs to different directory, not the same dir like tutorial. When I type-- c:\sun\appserver\bin> asant build.xml, it shows build.xml does not exist. I copied build.xml to the same dir of converter programs.
(1) Do I need to install ANT ??
(2) What else I need to do?
Thanks
Emily

Yes you need ANT installed to use it, but it would seem you have it installed. Make sure you are running ANT in the same directory as the build.xml file. At least, that's the way I've always done/seen it.

How do I remove an entire email account from mail if it does not allow me to click "remove mailbox"?

How do I remove an entire email account from mail if it does not allow me to click "remove mailbox"?

Welcome to the Apple Community.
Unfortunately you can't delete accounts, you also can't change or remove iCloud addresses.

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers. This is only happening on my Macbook not other macs. Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted problem continues

opps. Long title there... The past few days my Mail app has started downloading multiple copies of e-mails from all pop servers. This is only happening on my Macbook not other macs. Deleting mail from server does not help. I ran ClamXav found 2 viruses deleted those. Checked for software update and installed suggested downloads. Problem still contintues. Any suggestions?

Folks,
even after having repaired the inbox folder under "properties" a few times, I still had some e-mails where the contents are different from the subject line.
In other words in the inbox there are two e-mails: one with subject line "abc", and another one with subject line "def".
When I display the e-mail with the subject line "abc", the contents are from the e-mail with the subject line "def" in the in-basket.
What else can be done to correct this problem?
Thanks and best regards.
Fred Kunz-Shirzad
Chemin Ronzeures 6A
1297 Founex VD
Switzerland
[email protected]

When I touch my iPad screen to execute an app, the screen goes dark then the app icon reappears. The app does not execute.

When I touch my iPad screen to execute an app, then the screen goes dark then the app icon reappears. The app does not execute. Any thoughts?

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
Basic troubleshooting
From Here
http://www.apple.com/support/ipad/basics/

Oracle ADF refresh as deferred does not execute query on page load

In the oracle ADF page I have two panel boxes. (Oracle ADF 11.1.1.4)
a) Personal information panel box with PanelFormLayout (PersonalInfoViewObj) - ReadOnly View Object
b) Address information panel box with Table (AddressInfoViewObj) - Read Only View Object
For the iterators in a) and b) I have kept refresh condition as deferred and cacheResult=false. Also in b) for af:table, I have kept contentDelivery="immediate"
When page loads it fires SQL query for a) and populate the data in Personal information panel box. However for b) it does not execute the SQL query and the data is not getting populated ( in AddressInformation panel with the tables. Please note data is there in the DATABASE......)
Becasue with the refresh as deferred it was not executing the sql query for Panel b) (panel with Table and table iterator). I have tried refresh as always and refresh ifNeeded/renderModel/prepareModel however in that case it is executing the SQL query two times (twice).
Please let me know the best way to fix this issue.

Hi,
I think you need a method in an application module to init your data.
In your AM : create a method like :
public void init(){
getViewObject().executeQuery();
}In your adfc-config.xml create a methodCall from this method and a "control flow case" from the methodCall to your page.
and keep refresh as "deferred " in your pageDef.
Clément

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update

Global succession updates are limited to 500 relationships. If more than 500 exist PLM presents a warning message and does not execute the update.
How/Where to increase the relationship count?
The message which I can see :
Warning:
This specification has exceeded the number of parent relationships allowed by Where Used. The Where Used tool only supports up to 500 parent relationships.
Thanks

This really brings up a larger topic around change management.
The questions you should start with is
1. What kind of change is happening to the raw material?
2. Will this change affect anything upstream inside or outside of PLM4P? (Will this change affect nutrition, compliance, the ingredient statement, the label etc?)
3. Who needs to approve this change?
If they are non-material changes (changes that don't affect theoretical calculations, the ingredient statement, labeling, upstream systems that need to be notified etc) then you should be using get latest revision instead of global succession. Get Latest Revision will automatically switch out the material with the latest approved version. This logic is also configurable in case you need to add additional guard conditions. We can also provide guidance around locking the get latest revision lock once a specification has reached the retired/obsolete state so changes won't occur for specifications in those statuses.
If the changes to the raw material are material changes (changes that affect calculations, labeling etc) then the change should be reflected with a copy of the specification. Dependent specifications then need to be re-issued so calculations can be performed and the appropriate workflow reviews can occur. Smart Issue allows for filtering based on status and should let you re-issue in smaller blocks.
Let me know more about your change management strategy, how often large material changes happen and maybe example causes for those mass changes. We can also schedule a change management training session for everyone where we can share our vision and tools available for change management. This topic is quite large and generally requires a lot of business process discussion beyond just the tools available.
Thanks
Kelly

User exit code does not execute

I'm having a problem with User exit code that does not execute yet seems to be set up correctly.
The User exit is implemented as FM "EXIT_SAPLIPW1_001" in function group XQSM.
I've tried everything I know of with the CMOD and SMOD transactions, and I suspect some sort of transport error.
The only clue I can find in comparing the development system (which works) with the test system (which does not work) is that running "Extended Check" in SE80 on function group XQSM fails with the following error:
"The namespace of program SAPLXQSM has the setting "C" and cannot be tested."
Has anyone any idea what could have happened?

Let us try to retrace the steps.
1. You created a Z project in CMOD and assigned the enhancement IQSM0001 and the component EXIT_SAPLIPW1_001 and activated the same. This is there in the transport.
2. You double clicked on the include in the user exit and created it. You activated the code and included it in the same transport.
If you did the above steps, then your user exit should be active in your test system.
Can you please go to SE10, and list out the objects in your transport? You should see entries in there like below(not necessarily a complete list)
R3TR CMOD <your project name>
R3TR PROG ZXQSMU01
See if you created any of the objects as local objects.
Srinivas

Automatic Selected Item of List Builder Component Does not work (anymore)

Hi all,
Í'm working with Xcelsius Engage 2008 (version 5.3.2.0) and the automatic selection of an item at runtime of the list builder component does not work anymore. In a previous version it worked very well.
Here's the case: at runtime I want that the list builder component automatically puts the first item in the list to the destination section and selects it, so that a graph can show the underlying pushed data. In the previous version it worked o.k., but now at runtime the destination section remains empty at startup. If I interactively select an item from the source section to the destination section and update the list builder, the data is shown correctly, but it must done automatically, which worked o.k. in an earlier version of Xcelsius 2008...
This are my settings of the list builder component (which was running correctly earlier..):
-at the general tab I defined a range of labels
-at the general tab I defined 2 data column insertion series
-at the behaviour-common tab I defined selected items: position mode; items: the first item of the label list; insert items at runtime
-all of the data comes from an external xml data source
You can find an example of the visualisation at: http://onderzoek2.evinet.nl/projecten/10169/dynarap.htm. You will see that at start-up there is no item visible and selected in the destination section of the list builder....
I've tried every combinations of settings, build up the component from scratch, but its not working (anymore).
Greetings Erik-Jan Vriens

Hi njnits,
Print view button is a standard component of Xcelsius: look at it in the IDE
Exporting to Powerpoint is also a standard functionality, so yes. For this particular dashboard/report all data resides in an external xml-file which have to be accessible for Powerpoint
All visualisations, not only the table, in this/report fetch their data from an external xml-file, but a QaaWS-connection will also do the trick. You will have to write this dedicated service. In our case the xml-data is also generated automatically.
The external data is best defined as a sort of matrix, consisting of approx. 100 columns by 1000 rows. I agree it takes a lot of Xcelsius but it does the job....
Hopes this info helps....

Mail 7 (build 1822) does not execute rules

Similar Messages

Maybe you are looking for